Write to a QTemporaryDir instead of the test's build directory.
Change-Id: Ib65a0d58fbdf8caf8f2cb7002aeed1ce34742183
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I27a2f31e32a5b8157ef1082cf0e939bcc0c61c70
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I80e548fdb0e915ebe86dcd2205537cb6fee09cff
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest appears to be parallel-safe. It fails our parallel stress
test, but only because it writes to its own build directory. This
should not interfere with other autotests.
Change-Id: Ie99dde24edc0fda0c8ec4352a6e44abb7cbc54f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
tst_qprocess::lockupsInStartDetached sometimes locks up on mac.
Mark this as a known issue.
Task-number: QTBUG-25895
Change-Id: I08b1bcf39f2bf373e74509a06415d9ba514b8993
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
When given an invalid url, the output shouldn't be a valid url.
KDE's kurltest detected this regression compared to Qt4, where
all invalid urls were empty in toString() -- but we don't want that,
to give as much feedback as possible to the user.
Change-Id: Ie53e6e1c0a1d4bb9e12b820220dfb7e2f7753959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: Ibbbe01f7d9550b953fc9fbd6ed52fc99fdb5f5d7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This allows the QUrl component getters to return fully decoded data,
like they did in Qt 4. This is necessary for some use-cases where the
component like the user name, password or path are used outside the
context of a URL. In those contexts, the percent-encoded data makes no
sense, and the loss of data of what could be represented in a URL is
acceptable.
Also take the opportunity to expand the documentation of those getter
methods, explaining what the options argument does.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: I89f743cde78c02f169c88314bff0768714341419
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows one to instruct QUrl to ignore the percent-encodings and
interpret the data exactly as provided. This is useful in certain
use-cases where the data comes from a non-URL context.
The strict-mode checking of the components is not implemented
yet. Currently, the behaviour is equal to that of TolerantMode.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: Ia5abe045a8ce7f9b50cbce3b5a7e3735e068d03a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since we're about to introduce QUrl::FullyDecoded, this
QUrl::MostDecoded value would be confusing. Replace its uses with what
was intended at the point in question.
Change-Id: Iefd87bc33d37bace507c5cb0f206fa902e08e2df
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was trying all the possibilities by brute force, but it turns out
that some combinations are not valid so they should not be
tested. What's more, it was using old values of the flags, so this was
actually testing nothing.
Change-Id: I6c2f5230d240fc23418df2d3a1ca905dbc47dd10
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
When qt_ntfs_permission_lookup is used, QFile::permissions failed
for files with long filenames.
Also created a test case for this API, which revealed another bug.
Task-number: QTBUG-25629
Change-Id: I73b7676a9d059c0e782b3f701b2e6bbc92f671ed
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
When a file is specified on a path that includes a drive letter
followed by a colon but no slash then it didn't always account
for the fact that this refers to the current path on that drive.
This fixes the problems in completeBaseName(), baseName() and
path(). Tests are also added for these three cases and some
others too.
Task-number: QTBUG-25353
Change-Id: I47a197c6af066f532442ad269be57597ec61303a
Reviewed-by: Irfan Omair <irfan.omair@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QUrl::fromLocalFile("/foo") doesn't set Host, but QUrl("file:///foo")
does (to remember that it saw a Host section, even if empty, which is
useful for urls like "remote://"). So ignore the Host flag in operator==.
Change-Id: I4322b4a75420c4e42766c0d65c1b121f28028a76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix operator== and operator< so that a URL with an empty fragment
or query, is not treated as equal to a URL without any fragment or query.
This restores the Qt4 behavior on this particular issue.
Change-Id: Ie989f37353fb13c791b1d558d638d2e8a5b5d1b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Null bytearray means no query, and QString::fromLatin1(QByteArray())
doesn't give a null string, but an empty string.
Same for setEncodedFragment(QByteArray()).
Change-Id: I992e9253e35941d66886456872ea06aa2ae92450
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was crashing because the ':' was found past the end of the
username, causing the recoder to run from position 22 to 11, via the
long way around the memory.
Change-Id: Ic1ae596f34f7db857fb4210294974fb5a6adf691
Reviewed-by: Alexis Menard <alexis.menard@openbossa.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the url we pass as parameter already have percentage encoded data,
we don't want to decode it and call fromPercentEncoding. The test
coverage is not complete for qdataurl.cpp file but it is better than
previously and it will also protect us from future regressions.
Change-Id: I79f709f44bed1b7f274a3de639c7e291fa91a193
Reviewed-by: Thiago Macieira
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Show that nothing is changed either way, regardless of the encoding
flags used.
Change-Id: I31fba5f87eae777d4b708ab789b32169004bcbcc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It should only strip one slash (as the name indicates), and not if the
path is just "/".
Change-Id: I133a81977241de77a49d1d1559143d30e0bd52f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Unlike path(), toLocalFile() isn't reporting a URL component, so it
should decode the percent-encoded characters fully. This extra
decoding pass is meant to catch %00 to %1F, %7F and %25 (the percent
sign itself).
It also catches %80 to %FF, which aren't decoded because they don't
form UTF-8 sequences. That means QUrl::toLocalFile() has undefined
behaviour if the path contained non-UTF8 sequences.
Task-number: QTBUG-25459
Change-Id: Iab5a0ba6afcfc4510e297984f2ffc208cedd752b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Introduce a new QtMessageHandler that takes QString instead of
char *: This avoids converting to local8bit , only to convert it back
to utf16 for Windows.
The old QMessageHandler is kept for a transition period, but will
be removed before Qt 5.0.
Also fix qEmergencyOut (that is called in OOM situations) to not rely
on the default message handler.
Change-Id: Iee0ce5838f97175c98788b847964273dd22d4a37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test hangs ~2.6% of the time in CI.
The previous commit which attempted to mark this test as insignificant
did not work due to this .pro file doing a load(testcase) prior to the
line which set CONFIG += insignificant_test. testcase.prf must be
loaded _after_ insignificant_test is set.
Task-number: QTBUG-25342
Change-Id: I20470337fda8235e2fd0b6e8d5f564c8c57d167e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test hangs ~2.6% of the time in CI.
Task-number: QTBUG-25342
Change-Id: I2c3531140e15edfe2dc2524e101b84e3206a4e61
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The new QUrl is able to distinguish a URL component that is empty from
one that is absent. The previous one already had that capability for
the port, fragment and query, and the new one extends that to the username,
password and path. The path did not need this handling because its
delimiter from the authority it part of the path.
For example, a URL with no username is one where it's set to QString()
(null). A URL like "http://:kde@kde.org" is understood as an
empty-but-present username, for which toString(RemovePassword) will
return "http://@kde.org", keeping the empty-but-present username.
Change-Id: I2d97a7656f3f1099e3cf400b199e68e4c480d924
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22767
Change-Id: If3ca194fc982ad8fdc3e9a7f62fc346190ff01ea
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22766
Change-Id: I379873d5c483157e414201e5f8a13c3f4407f9fd
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This does not fail anymore, remove CONFIG+=insignificant_test
Change-Id: I4f98cfad563adfa460910976317c91e852db6872
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Most of the tests were removed while QUrl::toEncoded or fromEncoded
were deprecated in the development process. Since they aren't
deprecated in the end, bring them back.
Change-Id: Ibdb6cd3c4b83869150724a8e327a03a2cd22580d
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
By having the default value equal to zero, we follow the principle of
least surprise. For example, if we had
url.path()
and we refactored to
url.path(QUrl::DecodeSpaces)
Then instead of ensuring spaces are decoded, we make spaces the only
thing encoded (unicode, delimiters and reserved characters are
encoded).
Besides, modifying the default can only be used to encode something
that wasn't encoded previously, so having the enums as Encode makes
more sense.
As a side-effect, toEncoded() does not support any extra encoding
options.
Change-Id: I2624ec446e65c2d979e9ca2f81bd3db22b00bb13
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows things like http://example.com/{1234-5678}?id={abcd-ef01}.
But do not allow it in other parts of the URL. I could allow it in the
fragment, but in the username and password it would be too ugly.
In order to do that, make DecodeReserved use two bits and have
PrettyDecoded set only one of them. That way, toString(PrettyDecoded)
can be distinguished from toString(PrettyDecoded | DecodeReserved),
just as path(PrettyDecoded) can be distinguished from
path(PrettyDecoded & ~DecodeDelimiters).
Also, take the opportunity to avoid decoding the reserved characters
in the query. Keep them encoded as they should be.
Change-Id: I1604a0c8015c6b03dc2fbf49ea9d1dbed96fc186
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
DecodeReserved applies to all characters between 0x21 and 0x7E that
aren't unreserved, a delimiter, or the percent sign itself.
Change-Id: Ie64bddb6b814dfa3bb8380e3aa24de1bb3645a65
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
There's little value in having the DecodeUnambiguousDelimiters option
since neither QUrl nor QUrlQuery can return values that are ambiguous
in that particular context, ever.
This option could be used to encode a character if, when placed
in a URL, it would need to be encoded. Such cases are hash (#) or
question marks (?) in the path component, or slashes (/) and at signs
(@) in the userinfo.
However, we don't need two enums for that, since there are no
other characters that can appear in either form. Still, leave two bits
for this enum. In the future, if we want to split the gen-delims from
the sub-delims, we are able to.
Change-Id: If5416b524680eb67dd4abbe7d072ca0ef7218506
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This tests how QUrl encodes and decodes certain characters and leaves
some other ones alone. It also tests that the output of toString() (in
whichever encoding was being tested) is also parsed again to be
exactly the same as the previously decoded form.
Change-Id: Ie358d001f8b903409db61db48bde1ea679241a60
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is the same fix as the previous commit did for the other
components of the URL. But we're also changing how we handle the "[]"
characters in a query: previously the handling was like for other
sub-delims; now, they're always decoded, assuming that the RFC had a
mistake and they were meant to be decoded.
Change-Id: If4b1c3df8f341cb114f2cc4860de22f8bf0be743
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Refactor the way that QUrl stores and returns the components of the
URL so that ambiguous delimiters (gen-delims that could change the
meaning of the parsing) are interpreted correctly. Previously, QUrl
called "unambiguous" the form found in a full URL, even though each
item in isolation could have more characters decoded.
Now, instead, store only the fully decoded form. To recreate the
compound forms (the full URL, as well as the user info and the
authority), we need to do more processing.
This commit applies to the user name, password, path and fragment
only. The scheme, host and port do not need this work because they are
special; the query is handled separately.
Change-Id: I5907ba9b8fe048fff23c128be95668c22820663a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
