The Xcode generator iterates trought all libraries and replaces
their suffix (e.g "_debug") with a placeholder that lets Xcode
switch between different library versions depending on the target.
The current way we do this fails when the name of a library happens
to contain the string "_debug" (e.g "qmldbg_debugger"). Since we
replace every occurrence of suffix in the path, we end up
replacing that part as well. The result will be linking errors.
This patch ensures that we only replace the last occurrence of the
suffix in the file path.
Task-number: QTBUG-48961
Change-Id: I9fafbe0ea0ad8b9cfd13448d6b28801106e645ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With Xcode7, Apple added support for compiling apps to bit code
instead of binary (*). But this is only supported when the deployment
target is at least 6.0. And in Qt-5.5, the deployment target is
still set to 5.1.1. The result is that every Qt application will fail
building once people move to Xcode7.
Instead of bumping the deployment target (which we plan to do
for Qt-5.6), we choose to switch off bit code for now.
*: https://developer.apple.com/library/prerelease/ios/documentation/IDEs/Conceptual/AppDistributionGuide/AppThinning/AppThinning.html
Change-Id: I23001563439a7726506b7cd2dc77a82533b8a27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
since commit 22edeb3f4 (private; anno 2002), the generator would extract
-prebind and translate it into a PREBINDING property in the pbx file.
the writeout to the pbx file got lost in the rewrite for Xcode 3.2
(commit 66f6e5b1; anno 2012).
this isn't particularly bad, as prebinding is obsolete since OS X 10.3.4.
we now go the last mile and remove the handling of the flag. that means
that remaining projects which still use it (meaninglessly) will get a
warning from Xcode, which is kinda what we want.
QMAKE_LFLAGS should have never been part of the library iteration loop.
it was added there in the prebind handling commit, so we can get rid of
it again now.
Change-Id: Id7dee2b1e248bb2bd7aa7a3e66f82057921afffd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Currently, the Xcode generator uses "sourceTree = <absolute>" for
all PBXFileReferences. But the paths we use for referencing
libraries are relative. This patch will change this, so that we
always use absolute paths to be consequent.
This will fix a crash in Xcode that happens when opening
projects generated by Qt.
Change-Id: I3a372b93598a777c96ba353205cf19710a5923f5
Task-number: QTBUG-45966
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ProjectBuilderMakefileGenerator::openOutput should only change back
Option::output_dir when creating a pbx file inside an Xcode project.
Since the pbx file will be placed inside a different directory than
output_dir when creating an Xcode project, MakefileGenerator::openOutput()
will redirect output_dir to be inside the Xcode project as well. Since
we don't want this redirection, we change output_dir back to what it
was once the call returns. But we should only do this when creating
the whole Xcode project, since only then we create a pbx file that
is different from output_dir in the first place.
A bug with this is seen when making qt_makeqmake.mak (which is a
helper makefile inside the Xcode project). That file will only
regenerate the pbx file (and not the whole Xcode project), which
means that we don't enter the fileName.isEmpty() section, which
means that output_dir should stay as it is.
Task-number: QTBUG-45826
Change-Id: I03d5c3dec395ff4768f9272fd1981c6fd35efb1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
we (supposedly) fully support QMAKE_EXTRA_COMPILERS, so there is no need
for any special casing here.
Change-Id: I4e9d389320a3e5ad0acbf73823ff1e6f7b9c370f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the path is processed, and afterwards fixForOutput()ed again. the first
call makes no sense (even if it registered some variables that are gone
in the second call, that would be pointless exactly because they are gone).
Change-Id: I251f1e4858bec36f3a7a9427c2ba78031b35a2d3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
commands come already fully expanded and quoted from the project.
Change-Id: I239d5c305f5f65d32c832bc09bfd1c322051e149
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With multi-architecture builds and ONLY_ACTIVE_ARCH set to NO, Xcode will
build the final target for multiple architectures at the same time, but
CURRENT_ARCH will only match one of them, so we failed to set up the
right dependencies for our pre-link step, causing the step to happen
after linking in some cases.
We now build an exhaustive dependency list based on QMAKE_XCODE_ARCHS,
so that ONLY_ACTIVE_ARCH=NO can be used for release builds targeted at
the App Store.
Change-Id: I6702f020a6970807adc624779f6dde09be62beb9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Since commmit 0127962e47 the
PBXResourcesBuildPhase is used only for ICONS, because the old
behavior of using it when target path is not given differed from
the documentation and behavior of the makefile generator by using
Contents/Resources as target directory when targeting osx.
The PBXResouceBuildPhase optimizes png, compiles xib or asset catalogs
and copies the rest.
The advantage is that it makes it easy to add resources to the bundle,
the only problem is that the target directory is always the resource
directory.
The copy operation currently used does not compile resources, which
makes adding .xib (for the Launch File required to support iphone 6)
and asset catalogs difficult.
So we restore the old 5.3 behavior for ios, and use the build
resources phase when possible on osx (target Contents/Resources).
On osx this still implies a difference between the makefile
generator and the xcode generator: only the latter compiles resources.
Change-Id: Id1853693e88fc46562b044efdea2bf5f9da2c98c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
If creating an asset catalog from Xcode, Xcode will
add it to the "Copy Bundle Reources" phase, if it exists.
Since we don't always generate that phase, Xcode will
silently fail with the result that the asset catalog will
not take effect (no icon, launch images etc).
This patch will ensure that we always create the phase
(like native Xcode project does), which will fix the
problem.
Change-Id: Ief949d63543977f1021db992e0c41714d898e68b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Xcode uses project and group relative file paths, but to keep things
simple for ourselves we use absolute paths everywhere. We now make an
effort to actually make these paths absolute before telling Xcode they
are.
We also make the visual representation of the files inside Xcode be
just the filename, not the full path, like Xcode itself does. This
is among other things a prerequisite for Xcode to stop complaining
about missing launch images for retina 4-inch screens.
Change-Id: I5ff6bf07f61888e3c9fe2f64cbc2beb896b8442d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We build "Supporting Files" out of QMAKE_INTERNAL_INCLUDED_FILES, which
is really not supposed to be exposed to the user like that, but since
the variable will hold user-included pri files eg., the Xcode generator
piggy-backs on this variable to list the files.
To make the project view in Xcode a bit cleaner we explicitly exclude
any file living inside the Qt directory, meaning we won't show all the
pri and prf files from Qt's mkspecs directory anymore.
Change-Id: I828700aceac5fdf3ea2b27d9ba3885543c2ad137
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
the c'tor always determines the group itself anyway.
Change-Id: Ia8f1e747aaefdab164beae34851aa99cec9b790a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Depending on *.o in the Xcode output dir did not actually result in a
proper dependency. In Xcode5 this didn't matter much, as the effect was
that the build phase was run every time, but in Xcode6 the phase was
skipped. We now depend on the object directory itself, which will get
its modification time updated to match any rebuilt object files.
Change-Id: I8fa6f06c9008c4ce8f7fde7706057ce101bb5727
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead of sometimes ending up inside Content/Resources. The two build
phases PBXCopyFilesBuildPhase and PBXResourcesBuildPhase have different
semantics of where to place the files. For the former we use the root of
the bundle as the destination, and this is how QMAKE_BUNDLE_DATA is
documented and used, as well as how unixmake2.cpp implements it. The
latter on the other hand, always ends up in the resources subdirectory
on OSX.
Task-number: QTBUG-35318
Change-Id: I45bbd0dfe7ea78ae330ecb0c91efa74e1c76c9eb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The ICON qmake variable is implemented in the Xcode generator through
the ProjectBuilderSources::files() function, where we append the icon
to SOURCES (for some reason). This means we can't exclude non-object
sources when writing out PBXBuildFile entries, as the icon file entry
is referenced later on in the bundle resources phase.
This is a partial revert of 66f6e5b162 which introduced the broken
logic.
Change-Id: I120d2325165a1eefd3961a9162e9e5eb3a576c36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If the project has a custom Info.plist assigned to
QMAKE_INFO_PLIST, we should leave it as-is without
scanning and replacing contents inside it. Since we
always copy the file to the build folder at qmake
time, any later attempts to modify the source file
will not have any effect.
A better solution is to just reference the custom
plist directly from the Xcode, without modifying it.
This change will also stop unixmake2 from assigning the
default plist to QMAKE_INFO_PLIST, since we need to
know in the xcode generator if the variable was set in
the project or not.
Task-number: QTBUG-38260
Change-Id: I3c488b2960170c544d94f9db89d3ca95ee290bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
A pro file that adds files to QMAKE_BUNDLE_DATA using relative
paths will fail building if doing shadow builds. The reason is
that we look for the files inside the build dir.
This change will make sure we resolve files from the source dir
when not using full paths.
Task-number: QTBUG-37054
Change-Id: Ic1067861097b3b6a640ee862472d728d6188576a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Allows us to have scoped variables such as eg FOO[arch=armv7].
We could quote all variables, but Xcode doesn't, and we try to stay
close to the native behavior.
Change-Id: Ia6634a33e42031fe7e69c4f680803fa347e5de4a
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The Xcode generator relies on the generic makefile generator for extra
compilers such as qrc and moc, by generating makefiles that are then
executed as separate build steps in the Xcode build.
These makefiles are generated by entering a special mode in the Xcode
generator, in which case we _do_ want to resolve dependencies, so that
e.g. the files referenced inside a qrc file are added as dependencies
to the makefile rule that generates the qrc-cpp file.
Change-Id: I96bdcb165e9774a6328ae1980986fa2c6b00c6d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts an earlier change that tried to fix the relationship between
Qt's concept of output directories with what Xcode expects, but it broke
DESTDIR. The relationship between Qt and Xcode is still a mess, but at
least DESTDIR now works.
Change-Id: I44f056d48c87359a609e0337da266120ba4eb155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When a framework is referenced in the XCode project then it is known as
a framework by the lastKnownFileType and not the reference type. This
ensures it works in both XCode 3 and XCode 4.
Task-number: QTBUG-29371
Change-Id: I434246a46d6c5bfd50ba7de1a7c710c0caf0bc0a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The Xcode generator seems to have been written with the assumption that
writeMakeParts() would be called with the output directory as the current
directory, but that's not the case when shadow-building. Perhaps this
was changed in qmake at some point, and the Xcode generator was not
updated to reflect that.
Instead of replacing every occurance of fileFixify and other logic to
deal with paths, we just chdir into the output_dir for the duration
of the function (except when writing the 'make qmake' makefile, as
the regular makefile generator works as expected with the current
directory set to the input directory).
Change-Id: I6ba492036d73f29f4adbd7cd554db9504050629e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We already assume that if a source is buildable and should end up in OBJECTS we
can let Xcode build it, so we skip this input for the extra compiler.
Change-Id: I17b2408925b8e6513f0fa0d2459ec539bf7381d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The PBXResourcesBuildPhase will optimize resources, such as turning XIB
files into NIB files, running pngcrush on images, turning string files
into binary plists, etc, so we prefer that if possible.
Unfortunatly this phase does not support custom paths, so whenever we
encounter bundle data with a custom path we fall back to the regular
PBXCopyFilesBuildPhase.
Change-Id: I539db03dd7982fd37293123b6428cdb695f64d2b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of letting each qmake variable have its own auto-generated name
we try to group common variables into similar groups as used by the Xcode
templates provided by Apple.
We also prevent the same files from ending up multiple times in a group.
Change-Id: I73b13d6071bb7b3cd1501c422a99c60743221485
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This fixes a problem when the preprocessing scripts were called from a
path with spaces in it.
Task-number: QTBUG-15317
Change-Id: I92ea85e12e2f9abfc262a8dcaa4f414e471e468c
Reviewed-by: João Abecasis <joao@abecasis.name>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Due to all the changes recently it broke in some places, this now
gets it working again.
Change-Id: I879ca5684435289a61d8db248f2c3f64f6866a60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this may have worked a decade ago, but now it only produces funny
Makefiles (and needs hacking main.cpp). the feature doesn't seem *too*
important, so just clean it out.
Change-Id: I50a60b0e30341f0b523e4a5731c770c9c1013f8b
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't read the spec from scratch for every library just to get
QMAKE_LFLAGS_RPATH. we can perfectly use our current project for that
purpose.
Change-Id: I4e408b3fd5de81652181df032aa53cd8f2f8f806
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge their content as early as possible into QMAKE_LIBS. that's where
they ultimately end up anyway, and this approach is way simpler.
QMAKE_FRAMEWORKPATH_FLAGS is also used for the compiler flags, so it
remains as such in this second function.
Change-Id: Idc3ba4a9b2569fce3252d5f5ddc3f6ebf93650cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the as-we-go dump is sufficient (and usually necessary to actually find
the problem). if only the summary is interesting, the -E option can be
used now.
Change-Id: I9e34c6db9dcb99b38013c4d0cb80b8cb88ca36b5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
