Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously, only the first observer would get notified. Also, make sure
that the notifiers are always retained when switching between bindings
and values.
Change-Id: I9c25c0f2e288dac3a335b68e618f7ddeb44be25a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When QFutureWatcher (or QFutureInterface) is paused, it doesn't
mean that it will take effect immediately: the pending tasks may
still be in progress and keep reporting results. At the moment
QFutureWatcher will queue those events and report only with the
next resume. This behavior is wrong, QFutureWatcher should not
decide when to report events, the sender should decide when is the
right time. There's no benefit in reporting already happened events
with delay. Because of this, even the pause event itself was being
reported after resume.
Fixed the behavior by removing the logic of queueing events when
the state is set to "paused". It seems unlikely that the users of
QFutureWatcher rely on reporting events with delay.
[ChangeLog][Important Behavior Changes][QtCore] QFutureWatcher will not
immediately stop delivering progress and result ready signals when the
future is paused. At the moment of pausing there may be still computations
that are in progress and cannot be stopped. Signals for such computations
will be still delivered after pause, instead of being postponed and
reported only after next resume.
Fixes: QTBUG-12152
Change-Id: I9f0b545ac096578c52cc72d60575c018c01e3368
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
[ChangeLog][QtCore][QSortFilterProxyModel] Add a 'autoAcceptChildRows'
property to always show children rows of accepted rows.
Change-Id: I2402469ece438179d0f19888b9775cc27cf5c749
Reviewed-by: David Faure <david.faure@kdab.com>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added QFuture::onCanceled() method, for attaching handlers to be called
when the QFuture gets canceled.
Change-Id: I1f01647d6173ba0c1db6641e14140108b33ac7c4
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Introduced QtFuture::connect(sender, signal) function returning a
QFuture object, which is resolved when the signal is emitted.
Task-number: QTBUG-81589
Change-Id: Idbe301eb247b468b9b34f3470c3359d6a7af2f3a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Even in Qt 5, remove() can be passed an alias to *this. In Qt 6, with
the advent of substring sharing, this will become even more
pronounced. Use the same fix as was already used in QString::insert().
Pick-to: 5.15
Change-Id: I1a0d3d99fd7dff6e727661646d2cbfdc94df2682
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As best as I can guess, this used the QString::operator=(char), which
I locally removed. Before that lands in Qt, remove this ... wtf?
Pick-to: 5.15
Change-Id: Ie083fe69500d6b5b633416f89f5dd1d7068c20b2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Centralize, rather than keeping adding constructors from any
array-like container.
A more robust implementation, likely following the converting
constructor for std::span ([span.cons]), is out of scope for C++17
and will require C++20's ranges and concepts.
[ChangeLog][QtCore][QStringView] QStringView can now be constructed
from any contiguous container, as long as they hold string-like data.
For instance, it's now possible to create a QStringView object
from a std::vector<char16_t>, a QVarLengthArray<ushort> and so on.
Change-Id: I7043eb194f617e98bd1f8af1237777a93a6c5e75
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It has been the case for both QStringLiteral and QByteArrayLiteral
since Qt 5.0, and Q_ARRAY_LITERAL since Qt 6.0.
Since it's definitely surprising, add a note in the docs, which
is "somehow" consistent with the interpretation of capacity as
the biggest possible size before we reallocate. Since it's 0,
any manipulation of the size will cause a reallocation.
(Alternatively: the capacity() is for how many elements memory was
requested from the free store. No memory was allocated, so 0...)
Task-number: QTBUG-84069
Change-Id: I5c7d21a22d1bd8b8d9b71143e33d537ca0224acd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replacement methods do now exist in QRegExp, or
for QRegularExpression when porting to it.
Remove all autotests associated with the old methods.
Change-Id: I3ff1e0da4b53adb64d5a48a30aecd8b960f5e633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prepares for the removal of those methods from QString and
QStringList. The new methods in QRegExp are left as a porting help.
Change-Id: Ieffa33a79caf53b83029e9b070c4eb5cadca1418
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move pre/and post condition handling out of the main loop
to make that one as fast as possible.
Remove special handling of a corner case when the input length
is zero, where the utf8 decoder did something else than all
other decoders.
Change-Id: I94992767ea15405b38f7953adadaa6ff98b20b6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a first step add setEncoding/encoding() methods that use the
QStringConverter::Encoding enum, and port all uses of setCodec()/
codec() over to the new API.
Internally QTextStream still uses QTextCodec, this will be ported
over to QStringConverter in a follow-up change.
Change-Id: Icd764cf47b449b57f4ebd010c2dad89e6717d6c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a replacement for Qt::codecForHtml().
Change-Id: I31f03518fd9c70507cbd210a8bcf405b6a0106b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add method that tries to determine the encoding of the data
from an initial byte order mark.
Change-Id: I348c51a3d4db9b434af53359b739a7e17acfc760
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add static methods that allow converting between a name for an
encoding and the Encoding enum.
Change-Id: I12bc503cf757ea31d3ca8d5e1f1216efddcb16d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a constructor, that allows constructing a string converter by
name. This is required in some cases and also makes it possible to
(in the future) extend the API to 3rd party encodings.
Also add a name() accessor.
Change-Id: I606d6ce9405ee967f76197b803615e27c5b001cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Always encodee INI files as utf-8 in Qt6. This is mostly backwards
compatible, as old ini files would encode all non ascii characters.
[ChangeLog][Important behavioral changes] QSettings will now always
encode INI files as utf-8 (and the iniCodec/setIniCode methods are
removed). This is a change from Qt 5 and earlier, where QSettings would
by default escape all non ascii characters. The behavior is equivalent to
what you got in Qt5 by setting a utf-8 iniCodec on the settings object.
Settings files written in Qt 5 will still be readable in Qt 6 (unless
an iniCodec different from utf-8 was used), but to read Qt6 based ini
files in Qt 5 applications, setting the iniCodec to utf-8 is required.
Change-Id: Ic7dffcca17779bd5e3dae50d42ce633170289f6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Feed the data one by one to the encoder or decoder to
verify that the handling of incremental decoding is
correct.
Change-Id: I565e4f1872e00859026334f7662b6778772e159d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IgnoreHeader was a rather badly defined enum, in addition the
utf8 and utf16 codecs where handling BOMs somewhat different
for stateless decoding.
Fix this by introducing explicit flags for writing a bom when
encoding and not skipping the initial bom when decoding.
Source compatibility for QTextCodec is done with a couple of
static constexpr variables.
Change-Id: I0b2d94f84c937cec1e0494c16ef448c00382691d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove support for setting a codec different from UTF-8
for writing XML files.
All XML readers today can handle UTF-8, and there is no
reason anymore to write a file in a different encoding.
Change-Id: If89fb2d2474a2b55644d9bed7473c11ad91033eb
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
The new QStringEncoder and QStringDecoder classes
(with a common QStringConverter base class) are
there to replace QTextCodec in Qt 6.
It currently uses a trivial wrapper around the utf
encoding functionality.
Added some autotests, mostly copied from the text codec
tests.
Change-Id: Ib6eeee55fba918b9424be244cbda9dfd5096f7eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former messes in bad ways with the overload set (it, fatally,
attracts char16_t, e.g.). The latter was probably added in response to
ambiguities between (char) and (QChar). While it's harmless now,
remove it, since it no longer pulls its weight.
The no-ascii warning is now coming from QChar(char), so the protection
isn't lost.
[ChangeLog][QtCore][QString] The += operators taking char and
QChar::SpecialCharacter have been removed as they cause adding a
char16_t to QString to call the char overload, losing information. The
append() function was not affected.
Change-Id: I57116314bcc71c0d9476159513c0c10048239db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also port its callees. These functions scream to the QStringView-ified...
Change-Id: I13c95d65941eb8d02223306d80efd1437b4bd9b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUcs2() named ctor is designed to replace all the non-char
integral-type constructors of QChar which make it very hard to control
the implicit QChar conversions, which have caused a few bugs in Qt
itself. As a classical named contructor, it simply returns QChar.
The fromUcs4() named "ctor", however, needs to expand surrogate pairs,
and thus can't just return QChar. Instead, it returns a small struct
that contains one or two char16_t's, can be iterated over and be
implicitly converted to QStringView. To avoid bikeshedding the name
(FromUcs4Result, of course :), it's defined inline and thus can't be
named outside the function. This function replaces most uses of
QChar::requiresSurrogates() in QtBase.
[ChangeLog][QtCore][QChar] Added fromUcs2(), fromUcs4().
Change-Id: I803708c14001040f75cb599e33c24a3fb8d2579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
wchar_t hasn't been QStringView's storage_type for a very long time
(at least since 5.10). And in Qt 6, we require char16_t support not
only in the compiler, but also in the stdlib, so drop the guards and
the alternative code paths.
Change-Id: I99f28b575f61c16a2497840708beaa4b54a80f57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They use the Qt::TextDate format, so do depend on the feature.
Rename one in the process; nothing in its test has anything to do with
de_DE locale.
Pick-to: 5.15
Change-Id: I2adae5c46e6009c13b433993ed2c3c761a500bfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We checked against integer overflow, but not against overflowing the
QByteArray size limit. That caused a std::bad_alloc to be thrown, which
is bad when decoding unknown data. QCborStreamReader wasn't affected,
since it doesn't merge chunks.
Change-Id: I99ab0f318b1c43b89888fffd160c36f495fada87
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If any of the temporary directories and files can't be created, skip the
test. Otherwise, the cleanup routine would recursively delete "/".
Change-Id: I51f908a468be8fd2ebd523ff7ce27a7c78d1b4e2
Fixes: QTBUG-83863
Pick-to: 5.15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The system APIs expect an absolute "display name" of the file path,
so make it absolute.
The test was overly tolerant in accepting failure, as a QStorageInfo
initialized with a file path that doesn't exist is invalid, and thus
always different from the QStorageInfo of the home directory. Fix the
test to compare only valid QStorageInfo objects, and postpone the check
until the file we want to move has been created.
[ChangeLog][QtCore][QFile] moveToTrash supports relative file paths
on Windows
Change-Id: I94c8cd40c60fde469e38f76a98f867f20c6a0b15
Fixes: QTBUG-84015
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This file mustn't have changed at all, aside from the copyright headers,
since we switched to Git in October 2008.
Quick check shows the data from W3C is still online:
https://dev.w3.org/cvsweb/2001/XML-Test-Suite/
I didn't check that the CVS server is actually running because none of
my machines even has the cvs command anymore...
Pick-To: 5.15
Change-Id: I4e559af2a9a1455ab770fffd15f4e740114a2433
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Turns out that crashing on purpose is more difficult than it seems. It
should be easy, given how often we do it accidentally...
Let the null pointer dereferencing be the fall back. Some compilers are
too smart for their own good and remove the fault. Instead, let's rely
on raise(SIGABRT) on Unix and on the UD2 instruction on Windows.
Pick-To: 5.15
Change-Id: Ibdc95e9af7bd456a94ecfffd1603f1c9b73b167d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Expected and actual were inverted.
Pick-To: 5.15
Change-Id: Idc3fae4d0f614c389d27fffd15e9fa6a0a8f25e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We don't rely on a latin1 locale anymore for the test,
and the other code was not doing anything.
Change-Id: I08bc08d200c9e037884d8b680dfbb24c129f3d2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
We must move the functor properly into the binding object, otherwise we
end up with stale pointers as pointed out by ASAN.
Change-Id: Icd84f4c113dd48e1e3e2d744abac0902cdf9339e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QUrl will reject invalid URLs for us, so we don't get normalization. The
original junk should be retrievable, of course.
Change-Id: Ibdc95e9af7bd456a94ecfffd160610f5b2c8e1a2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We rely on QDateTime::fromString being proper, so this is not extensive
testing.
Change-Id: Ibdc95e9af7bd456a94ecfffd160610cdac5d62e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By QCborValue design, we store the textual representation in ISO format,
equivalent of CBOR tag 0, which isn't allowed to have negative years or
beyond year 10000.
Change-Id: Ibdc95e9af7bd456a94ecfffd16060ccff359c296
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QDateTime::fromSecsSinceEpoch() multiplies by 1000 but does not check
for overflow. That means we must do so in QCborValue validation. We
can't use mul_overflow<qint64> on 32-bit platforms, so we do a compare-
and-branch there. For 64-bit platforms, we prefer to do the
multiplication with checked overflow, as the common case is that it will
not overflow and we'll need the multiplication anyway.
Change-Id: Ibdc95e9af7bd456a94ecfffd16060cba6f1c86b8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The linker doesn't have a -rdynamic option. Otherwise the build
fails with
g++.exe error unrecognized command line option '-rdynamic'
Task-number: QTBUG-75578
Change-Id: Ie89a19fd25e90bef14e64d1d98fd973fa0315997
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also removed add_subdirectory calls for subdirs which no longer exist.
Change-Id: I759f408ca812e1721dde495b0e23feffdeeb9c60
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
[ChangeLog][QtCore][QString] Now supports appending, prepending
and inserting QStringViews.
Change-Id: I7538c050c67590f27d91443eda0b94a4b80b62f2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Added asserts to insure the invariant declared in the documentation.
Canceled future object is not valid, hence we don't need to handle
this case separately.
Fixes: QTBUG-83389
Change-Id: Ib0653ef40cd3135574a91740e4ce2c6dc4da8a71
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The internal removeAt(index) method was implemented as taking cbor
indexes directly, in contrast to the other ...At(index) methods.
Fixes: QTBUG-83695
Change-Id: I16597eb6db1cf71e1585c041caa81bf8f7a75303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a date-time was parsed from a string, the result was equal (as a
date-time) to the correct value, but had (at least in some cases) the
wrong spec, where it should have had a spec reflecting the zone
specifier parsed.
The time-spec imposed for the benefit of QDateTimeEdit is now moved
from QDateTimeParser to QDateTimeEditPrivate, which takes over
responsibility for imposing it. QDateTimeParser assumes Qt::LocalTime
in member functions (where applicable) and uses the time-spec parsed
from the string when constructing the date-time.
QDateTime::fromString() and QLocale::toDateTime() are updated to
use the full QDateTime returned by QDateTimeParser.
Fixes: QTBUG-83075
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I8b79add2c7fc13a200e1252d48dbfa70b36757bf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Ensure they are handled as enumerations in QMetaType.
This is required for handling QFlag-type properties in Qt Designer
Fixes: QTBUG-83689
Change-Id: Ifbfb5c5b5cd34fce462e299505d063e22e725c2e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use the move-only versions of result reporting and getting operations,
if the type of QFuture is not copyable.
Task-number: QTBUG-81941
Change-Id: Ic9fa978380e2c24e190e68d974051a650b0e5571
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This is a follow-up to commit ed2b110b6a
to fix indexing errors. Added the test that should have accompanied
that commit, which found some bugs, and refined the Indian number
formatting test (on which it's based).
Make variable i in the loops that insert grouping characters in a
number be consistently a *character* offset - which, when each digit
is a surrogate pair, isn't the same as an index into the
QString. Apply the needed scaling when indexing with it, not when
setting it or decrementing it. Don't assume the separator has the same
width as a digit.
Differences in index no longer give the number of digits between two
points in a string, so actively track how many digits we've seen in a
group when converting a numeric string to the C locale. Partially
cleaned up the code for that in the process (more shall follow when I
sort out digit grouping properly, without special-casing India).
Change-Id: I13d0f24efa26e599dfefb5733e062088fa56d375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove a test failure when compiling with asan enabled.
Change-Id: I2b8e676665572adcbbac6a910983d5b209bf6d23
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Instead of requiring the implementation to do the compare dance, let's
do this in the library. This reduces the amount of duplicated code
slightly and makes it easier to generate binding code from qml files.
Change-Id: Ia3b16cf9769e74d076b669efe4119ab84af3cdf0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The pre-existing overload passes an int, but this can mean the
descriptor gets truncated in compilations where the descriptor
is 64-bit.
The old overload with int is visible when querying the metaobject system
so string-based connects still work as before, and connecting to it will
produce a deprecation warning in the output.
At the same time the PMF-based connect will, on recompile, pick the
QSocketDescriptor overload. As an added improvement it also comes with
the notification type, removing the need for separate slots where the
code would be mostly shared anyway.
The QSocketDescriptor type can be implicitly converted to and from
qintptr to ensure existing code still compiles. It can also be
constructed from Qt::HANDLE on Windows.
In this same patch I also update the existing string-based connects in
this module, which then includes updating the parameters for some slots
as well.
[ChangeLog][QtCore][QSocketNotifier] Added
QSocketNotifier::activated(QSocketDescriptor, QSocketNotifier::Type).
This replaces the activated(int) signal which in 64-bit environments
could truncate the socket descriptor. If you use "activated" with the
string-based connect() then you need to update the parameter type of the
signal and slot if it had one. If you use it with the pointer to member
function based connect() then all you need to do is update your slot's
parameter type if it has one. If you need to compile your source code
with multiple versions of Qt then connect() to this function using
pointer to member function and update the slot's parameter type if
needed.
Task-number: QTBUG-70441
Change-Id: Ic43d6bc4c5bcb4040867b2ffad8d36fb01eed8af
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use P0608's trick to detect convertibility without narrowing;
and now that we can depend on C++17, use its features.
First, this moves the burden of detecting a narrowing conversion on
the compiler, rather than us maintaining a complicated series
of checks. Of course, this exposes
* bugs in compilers (e.g. GCC < 9 thinks that float->bool is not
narrowing;
* behavior still not (widely) implemented (pointer to bool
conversions are narrowing, P1957);
* interesting compiler choices, e.g. GCC 9 thinks that unscoped
enumerations are non-narrowing convertible to a datatype big
enum to contain all the _enumerators_, even if the underlying
type of the enum (and/or its sizeof()) is wider than the target
datatype.
Second, it allows to detect conversions that have a narrowing
conversion as an intermediate step. Given a type like
struct Bad { operator double() const; };
then an object of type Bad is implictly convertible to a type
like int via a narrowing conversion. Therefore, a connection
is possible between a signal carrying a Bad and a slot accepting
an int. We can now detect and block this.
Tests regarding scoped enumerations have been dropped,
for the simple reason that a scoped enumeration is not
implictly convertible to an integral type, so we don't have
that detection (it would constantly fail). Scoped enumerations
do not take part in narrowing conversions anyhow, cf. [dcl.init.list].
[ChangeLog][QtCore][QObject] The detection of narrowing conversions
when calling QObject::connect() when
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT now takes also
into account user-defined implicit conversions that undergo
through a narrowing conversion.
Change-Id: Ie09d59203fe6283378b36dfbc54de1d58098ef51
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Map setFilterWildcard() and setFilterFixedString() to now use
QRegularExpression.
Change-Id: I2dff2015234decb2badfd306975dcff8553cdd7f
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
The double-swap technique I used was flawed and broke on
self-assignment. What I had meant to use was the move-and-swap
technique. Thanks to Peppe for pointing it out.
This also fixes a compiler bug in the Green Hills compiler. It was
finding the wrong "swap" function in qSwap:
using std::swap;
swap(value1, value2);
It's supposed to find swap(QCborValue &, QCborValue &) due to argument-
dependent lookup. It's instead finding std::swap<QCborValue>, which
recurses.
Fixes: QTBUG-83390
Change-Id: Ibdc95e9af7bd456a94ecfffd1603e1bee90cd107
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The old implementation was either using CRC32 on modern processors
or a trivial, but rather slow implementation.
We can't continue with CRC32, as that implementation can only
give us 32bit hashes, where we now need to support 64bit in Qt 6.
Change the implementation to use MurmurHash, as public domain
implementation that is both very fast and leads to well distributed hashes.
This hash function is about as fast as the SSE optimized CRC32 implementation
but works everywhere and gives us 64 bit hash values.
Here are some numbers (time for 10M hashes):
14 char 16 char
QByteArray QString float
old qHash (non CRC32) 127ms 134ms 48ms
old qHash (using SSE CRC32 instructions 60ms 62ms 46ms
new qHash 52ms 43ms 46ms
Unfortunately MurmurHash is not safe against hash table DoS attacks, as
potential hash collisions are indepenent of the seed. This will get
addressed in followup commit, where we use SipHash or an SSE optimized
AES based hashing algorithm that does not have those issues.
Change-Id: I4fbc0ac299215b6db78c7a0a2a1d7689b0ea848b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
At the same time use the opportunity to refactor the
insertion code inside the implementation of QHash to
avoid copy and move constructors as much as possible
and always construct nodes in place.
Change-Id: I951b4cf2c77a17f7db825c6a776aae38c2662d23
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is required, so that QHash and QSet can hold more
than 2^32 items on 64 bit platforms.
The actual hashing functions for strings are still 32bit, this will
be changed in a follow-up commit.
Change-Id: I4372125252486075ff3a0b45ecfa818359fe103b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Make use of the new features available in QHash and do a more
performant implementation than the old one.
Change-Id: Ie74b3cdcc9871cd241aca205672093dc395d04a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A brand new QHash implementation using a faster and more memory efficient data
structure than the old QHash.
A new implementation for QHash. Instead of a node based approach as the old
QHash, this implementation now uses a two stage lookup table. The total
amount of buckets in the table are divided into spans of 128 entries.
Inside each span, we use an array of chars to index into a storage area
for the span.
The storage area for each span is a simple array, that gets (re-)allocated
with size increments of 16 items. This gives an average memory overhead of
8*sizeof(struct{ Key; Value; }) + 128*sizeof(char) + 16 for each span.
To give good performance and avoid too many collisions, the array keeps its
load factor between .25 and .5 (and grows and rehashes if the load factor goes
above .5).
This design allows us to keep the memory overhead of the Hash very small, while
at the same time giving very good performance. The calculated overhead for a
QHash<int, int> comes to 1.7-3.3 bytes per entry and to 2.2-4.3 bytes for
a QHash<ptr, ptr>.
The new implementation also completely splits the QHash and QMultiHash classes.
One behavioral change to note is that the new QHash implementation will not
provide stable references to nodes in the hash when the table needs to grow.
Benchmarking using https://github.com/Tessil/hash-table-shootout shows
very nice performance compared to many different hash table implementation.
Numbers shown below are for a hash<int64, int64> with 1 million entries. These
numbers scale nicely (mostly in a linear fashion with some variation due to
varying load factors) to smaller and larger tables. All numbers are in seconds,
measured with gcc on Linux:
Hash table random random random random reads full
insertion insertion full full after iteration
(reserved) deletes reads deletes
------------------------------------------------------------------------------
std::unordered_map 0,3842 0,1969 0,4511 0,1300 0,1169 0,0708
google::dense_hash_map 0,1091 0,0846 0,0550 0,0452 0,0754 0,0160
google::sparse_hash_map 0,2888 0,1582 0,0948 0,1020 0,1348 0,0112
tsl::sparse_map 0,1487 0,1013 0,0735 0,0448 0,0505 0,0042
old QHash 0,2886 0,1798 0,5065 0,0840 0,0717 0,1387
new QHash 0,0940 0,0714 0,1494 0,0579 0,0449 0,0146
Numbers for hash<std::string, int64>, with the string having 15 characters:
Hash table random random random random reads
insertion insertion full full after
(reserved) deletes reads deletes
--------------------------------------------------------------------
std::unordered_map 0,4993 0,2563 0,5515 0,2950 0,2153
google::dense_hash_map 0,2691 0,1870 0,1547 0,1125 0,1622
google::sparse_hash_map 0,6979 0,3304 0,1884 0,1822 0,2122
tsl::sparse_map 0,4066 0,2586 0,1929 0,1146 0,1095
old QHash 0,3236 0,2064 0,5986 0,2115 0,1666
new QHash 0,2119 0,1652 0,2390 0,1378 0,0965
Memory usage numbers (in MB for a table with 1M entries) also look very nice:
Hash table Key int64 std::string (15 chars)
Value int64 int64
---------------------------------------------------------
std::unordered_map 44.63 75.35
google::dense_hash_map 32.32 80,60
google::sparse_hash_map 18.08 44.21
tsl::sparse_map 20.44 45,93
old QHash 53.95 69,16
new QHash 23.23 51,32
Fixes: QTBUG-80311
Change-Id: I5679734144bc9bca2102acbe725fcc2fa89f0dff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clear Linux containers running as root may have no /etc/passwd. But
they'll have /etc/machine-id because systemd creates that. Also test
/proc/version (a Linux-specific file) because that isn't writeable even
by root.
Take the opportunity to check with access() instead of assuming root and
only root can write to the file.
Change-Id: Ibdc95e9af7bd456a94ecfffd1603e8359604752b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This was never tested. The infinite loop in QCborContainerPrivate::grow
is the proof.
[ChangeLog][QtCore][QCborArray] Fixed an infinite loop when operator[]
was called with with an index larger than the array's size plus 1.
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df3855c73f20
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Similar to the QJsonObject issue of the previous commit (found with the
same tests, but not the same root cause). One fix was that copying of
byte data from the QByteArray to itself won't work if the array
reallocates. The second was that
assign(*that, other.concrete());
fails to set other.d to null after moving. By calling the operator=, we
get the proper sequence of events.
[ChangeLog][QtCore][QCborMap] Fixed some issues relating to assigning
elements from a map to itself.
Note: QCborMap is not affected by the design flaw discovered in
QJsonObject because it always appends elements (it's unsorted), so
existing QCborValueRef references still refer to the same value.
Task-number: QTBUG-83366
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df846f46094d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The refactoring to use CBOR missed two places where we could assign from
the same object and thus cause corruption. In fixing this issue, I found
a design flaw in QJsonObject, see Q_EXPECT_FAILing unit test and task
QTBUG-83398.
[ChangeLog][QtCore][QJsonObject] Fixed a regression from 5.13 that
incorrect results when assigning elements from an object to itself.
Fixes: QTBUG-83366
Change-Id: Ibdc95e9af7bd456a94ecfffd1603df24b06713aa
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Normally people shouldn't create temporary files on /, but if you're
running as root, why not?
Caught when running tst_qtemporaryfile as root:
openat(AT_FDCWD, "", O_RDWR|O_CLOEXEC|O_TMPFILE, 0600) = -1 ENOENT (No such file or directory)
Change-Id: Ibdc95e9af7bd456a94ecfffd1603ebfc17cea220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
When a class has multiple QProperty members to implement functionality,
it is common to have functions in the class that react to changes. For
example to emit a compatibility signal, in case of Qt Quick to mark the
scene graph as dirty, etc. etc.
To faciliate this use-case, this patch adds an internal
QPropertyMemberChangeHandler template that allows connecting a QProperty
field to a member function callback.
At the moment that callback is still 3 * sizeof(pointer). This could in
theory be reduced to 2 by eliminating the back-pointer (prev) as the
observer lives as long as the property. That however belongs into maybe
a future patch.
In order to get a pointer back to the surrounding object that holds the
QProperty as well as provides the callback function, the property system
was changed to pass through the address of the QProperty member at
run-time, and at compile time the delta from the QProperty member to the
beginning of the surrounding class is calculated. Through subtraction we
obtain the pointer to the owning object.
Change-Id: Ia2976357053f474ff44d0d6f60527c3b8e1f613a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
std::function does not have deduction guides in older libc++ (presumably older
than version 10). Omitting the template parameter isn't essential for the test,
so just give it.
Change-Id: Ia9bb91f961b0928203737ec976913effd06433e0
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
The name of the option may cause confusion due to the fact
that it's not _fully_ anchoring the match, only anchoring it
at the offset passed to match() -- in other words, it's a
"left" anchoring. Deprecate the old name and introduce
a new one that should explain the situation better.
[ChangeLog][QtCore][QRegularExpression] The AnchoredMatchOption
match option has been deprecated in favor of
AnchorAtOffsetMatchOption, which should better describe
that the match is only anchored at the offset.
Change-Id: Ib751e5e488f2d0309a2da6496378247dfa4648de
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Added QFuture::onFailed() method, which allows attaching handlers for
exceptions that may occur in QFuture continuation chains.
Task-number: QTBUG-81588
Change-Id: Iadeee99e3a7573207f6ca9f650ff9f7b6faa2cf7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replaced the internal ExceptionHolder for storing QException* by
std::exception_ptr. This will allow to report and store exceptions
of types that are not derived from QException.
Task-number: QTBUG-81588
Change-Id: I96be919d8289448b3e608310e51a16cebc586301
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We should not implicitly convert a QString to a QLocale object. It can
easily create unwanted side effects.
Change-Id: I7bd9b4a4e4512c0e60176ee4d241d172f00fdc32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QFuture's original design pre-dates C++11 and its
introduction of move semantics. QFuture is documented
as requiring copy-constructible classes and uses copy
operations for results (which in Qt's universe in general
is relatively cheap, due to the use of COW/data sharing).
QFuture::result(), QFuture::results(), QFuture::resultAt()
return copies. Now that the year is 2020, it makes some
sense to add support for move semantics and, in particular,
move-only types, like std::unique_ptr (that cannot be
obtained from QFuture using result etc.). Taking a result
or results from a QFuture renders it invalid. This patch
adds QFuture<T>::takeResults(), takeResult() and isValid().
'Taking' functions are 'enabled_if' for non-void types only
to improve the compiler's diagnostic (which would otherwise
spit some semi-articulate diagnostic).
As a bonus a bug was found in the pre-existing code (after
initially copy and pasted into the new function) - the one
where we incorrectly report ready results in (rather obscure)
filter mode.
Fixes: QTBUG-81941
Fixes: QTBUG-83182
Change-Id: I8ccdfc50aa310a3a79eef2cdc55f5ea210f889c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QByteArray doesn't like it.
Apply the same protection to QString, which we know uses the same
backend but uses elements twice as big. That means it can contain
slightly more than half as many elements, but exact half will suffice
for our needs.
Change-Id: Iaa63461109844e978376fffd15f9d4c7a9137856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QtQml needs the private just for one detail which nobody else should
need it for: Tracking additional dependencies and marking the binding as
dirty. Exporting the private requires hiding some variables and
providing accessors, to compile with MSVC - including the removal of
QVarLengthArray usage. Upside: The binding structure shrinks by 8 bytes
and the encapsulation makes it a little easier to change things without
breaking declarative, ... in the unlikely event ;-)
Also remove setDirty() from the public API as it's not needed by QtQml
and using it is dangerous, because it means that there's a risk of
somebody keeping a reference (count) to the untyped binding from within
the binding closure, which introduces a memory leak.
Change-Id: I43bd56f4bdf218efb54fa23e2d627ad3acfafeb5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Speed up the QSortFilterProxyModel filtering by only updating the
source_to_proxy entries which are really changed - When proxy intervals
are added or removed, it is not needed to update the proxy_to_source
indexes which were not touched.
Change-Id: I35459ff1b04f4610ec74f4b01d58a71832a9ae22
Reviewed-by: David Faure <david.faure@kdab.com>
Increasing the sample size of randomly generated test samples reduces
the probability of small deviations from the expected uniform
distribution.
On my machine with the new values the test fails approximately once per
3000 consecutive runs, instead of failing once per 300.
Change-Id: I4d1815504c353290a2fb350b3fd1cbb802f8d559
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A simple 16k file can produce deep enough recursion in Qt to cause stack
overflow. So prevent that.
I tested 4096 recursions just fine on my Linux system (8 MB stack), but
decided 1024 was sufficient, as this code will also be run on embedded
systems that could have smaller stacks.
[ChangeLog][QtCore][QCborValue] fromCbor() now limits decoding to at
most 1024 nested maps, arrays, and tags to prevent stack overflows. This
should be sufficient for most uses of CBOR. An API to limit further or
to relax the limit will be provided in 5.15. Meanwhile, if decoding more
is required, QCborStreamReader can be used (note that each level of map
and array allocates memory).
Change-Id: Iaa63461109844e978376fffd15fa0fbefbf607a2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If we detected that the OS supports a version of system forkfd (Linux
pidfd, FreeBSD procdesc), the forkfd_wait() function was using only the
system waiting implementation, which of course can't work for file
descriptors created with FFD_USE_FORK. So just detect EBADF and attempt
again.
If the file descriptor is neither one of our pipes nor a system forkfd,
bad things will happen...
Fixes: QTBUG-82351
Change-Id: I4e559af2a9a1455ab770fffd15f59fb3160b22eb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Add some overloads where (I thought) it makes sense for QDir and QFile
to accept std::filesystem::path objects. Currently my thinking is to
not add overloads for static functions where std::filesystem can already
do the same job, e.g. create directory or file.
Template and enable_if is needed due to both QString and
std::filesystem::path being able to be constructed from string literals.
The common shared code is currently in QFile because QDir had an
implicit include of QFile, made explicit in this patch, and QFileInfo
has an include to QFile as well.
The QT_HAS_STD_FILESYSTEM macro is visible in user-code which I
currently take advantage of in the tests, and users could too.
Change-Id: I8d05d3c34c6c17e20972a6a2053862b8891d6c3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test fails on MinGW 8.1 x86, but not on MinGW 8.1 x86_64.
Task-number: QTQAINFRA-3304
Task-number: QTBUG-69947
Change-Id: Ie9a35bd6d5a8481028cd0ea426d1cf00bd7cf093
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
A generic binding allows implementing the binding function in a way that
enables the QML engine to run binding scripts and convert the V4::Value
into a QVariant and then assign the value to the property with the help
of QMetaType::construct.
Change-Id: Id4807be92eee7e3501908e6c5e4c861cfcb7772a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we want to filter away a column without changing the filtering
for the rows calling invalidateFilter() is wasteful because it will
call filterAcceptsRow() for all rows even though that is not needed.
This commit add two functions, invalidateRowsFilter() and
invalidateColumnsFilter() that work the same way as invalidateFilter()
except that they will invoke respectively only filterAcceptsRow() and
filterAcceptsColumn().
Change-Id: Ib4351cf08c229bd97bbbfee6da92397dca579a84
Reviewed-by: David Faure <david.faure@kdab.com>
QSet and std::(unordered_)set were so far not treated as appendable, as
they lack a push_back method. We do however need support for this in
declarative to enable converting back from QJSValue arrays to sets.
We achieve this by testing for and using the insert method. While vector
has also such a method, it doesn't take a single value, but rather a
position or iterator + value, so the template specialization is not
ambiguous.
Task-number: QTBUG-82743
Change-Id: I74fc7b1b856d9bcd38100b274ba2b69578ea8bbb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A common pattern in declarative is to use the unused bits in linked list
next pointers for additional information storage. The "next" pointer is
typically then a tagged pointer of the containing class, which is not
fully defined yet. Therefore alignof() can't be used at tagged pointer
instantiation time. This patch delays the calls to alignment, etc. until
the corresponding functions are used, as in principle the tagged pointer
is just a quintptr and no additional information should be needed until
operating on it.
Change-Id: I87a3578ee921d471e1b60ed5903b549ef0610b97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The call of _control87 would crash because of the previous test.
Change-Id: I254efe9c2e9892a473a02663e5ff7016791d5d6d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Useful for attaching small bits of information in the alignment bits of
a naked pointer. For use in the new property system as well as in
qtdeclarative (where currently a similar class exists as private API).
Change-Id: Idf9b93e714e15129f302e16425dbeda94bcd207b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This implements the core value based property binding system with
automatic dependency tracking. More features are to be added later, and
the documentation will need further improvements as well.
Change-Id: I77ec9163ba4dace6c4451f5933962ebe1b3b4b14
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Include WordBreakTest.html, since a test uses sample strings from it,
albeit without actually reading the file.
Had to comment out more of the new tests, as at Revision 24, pending
an update to harfbuzz and the text boundary detection code.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Task-number: QTBUG-82747
Change-Id: I0082294b09d67ffdc6a9b5c15acf77ad3b86f65f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Allow for more than 2^31 items and large offsets.
Change-Id: I42f7bf20ce0e4af43dbb2e2083abf0e232e68282
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use QTRY_COMPARE in the flaky tests instead of waiting.
Change-Id: Ic18fc5fde3fa47f3b3ef21e6acd876bd6990981d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][Potentially Source-Incompatible Changes] QtConcurrent::run
has the following signatures: run(Function &&f, Args &&...args) and
run(QThreadPool *pool, Function &&f, Args &&...args). If f is a member
pointer, the first argument of args should be an object for which that
member is defined (or a reference, or a pointer to it). See the
documentation for more details.
Fixes: QTBUG-82383
Change-Id: I18f7fcfb2adbdd9f75b29c346bd3516304e32d31
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QLinkedList has been deprecated, but we still need to test it. Suppress
the warnings for QLinkedList used in tests. Note, that I had to move
some of the test code, to avoid repeating
QT_WARNING_PUSH/QT_WARNING_POP everywhere.
Change-Id: I4203b3ef50045c4f45475a08638dbdc60f68761d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Added QFuture::then() methods to allow chaining multiple asynchronous
computations.
Continuations can use the following execution policies:
* QtFuture::Launch::Sync - the continuation will be launched in the same
thread in which the parent has been executing.
* QtFuture::Launch::Async - the continuation will be launched in a new
thread.
* QtFuture::Launch::Inherit - the continuation will inherit the launch
policy of the parent, or its thread pool (if it was using a custom one).
* Additionally then() also accepts a custom QThreadPool* instance.
Note, that if the parent future gets canceled, its continuation(s) will
be also canceled.
If the parent throws an exception, it will be propagated to the
continuation's future, unless it is caught inside the continuation
(if it has a QFuture arg).
Some example usages:
QFuture<int> future = ...;
future.then([](int res1){ ... }).then([](int res2){ ... })...
QFuture<int> future = ...;
future.then([](QFuture<int> fut1){ /* do something with fut1 */ })...
In the examples above all continuations will run in the same thread as
future.
QFuture<int> future = ...;
future.then(QtFuture::Launch::Async, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in a new thread (but on the
same one).
QThreadPool pool;
QFuture<int> future = ...;
future.then(&pool, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in the given thread pool.
[ChangeLog][QtCore] Added support for attaching continuations to QFuture.
Task-number: QTBUG-81587
Change-Id: I5b2e176694f7ae8ce00404aca725e9a170818955
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- QLoggingRule::parse() and the ctor take pattern as QStringView
- parseNextLine takes lines as QStringView and produces the pattern as
QStringView for QLoggingRule
- (setContent has to wait for QStringTokenizer)
- QLoggingRule::pass()'s first argument is always QLatin1String, so
take it as one
Use chopped() more, add a std::move().
Change-Id: Ic95ea77464a9922fef452846bc6d5053bd5de56e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No surprises, as char16_t is transparently handled by QChar overloads.
Ok, one surprise: we seem to have QChar <> QByteArray relational
operators, but they don't work for char16_t. Probably members of
QChar, so LHS implicit conversions are disabled. Didn't investigate,
because it needs to be fixed at some point anyway, but that point is
not now.
Change-Id: I74e1c9bdd168e6480e18d7d86c1f13412e718a32
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... to not fold QChar tests into QString ones.
This is needed for adding char16_t tests.
Change-Id: I2507d7d68a39ff96cf033eadde10e383dc976dda
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QByteArray, they were just not marked as such.
In QString and QStringRef, the implicit conversion from QChar to
QString would destroy it. Add a QChar overload, delegating to
QStringView.
Added docs for the new overloads, copying from the nearest neighbor so
as to not look out of place. All string classes use different wording
for these functions. A cleanup of this state of affairs is out of the
scope of this patch.
Change-Id: I0b7b1d037aa229bcaf29b793841a18caf977d66b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was fixed and metrics show no flaky failures anymore.
Task-number: QTBUG-58713
Change-Id: I50c0844db099f45bb5b7ca51a510bf0318554c44
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
resolve() is technically thread-safe if the library has been loadaed. We
don't promise that, but it's there. More importantly, because
QLibraryPrivate is shared among QPluginLoader and QLibrary that point to
the same file, we can't thread-safely set the error string.
[ChangeLog][Important Behavior Changes] QLibrary::resolve() will no
longer set or clear the error string based on the success of finding the
symbol. The error string will reflect the result of loading the library.
Change-Id: I46bf1f65e8db46afbde5fffd15e1a4f4c2713c17
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the arrow operator to the stl-like key-value
iterator (QKeyValueIterator) for QMap and QHash.
This allows using normal member access syntax it->first and it->second
instead of having to use (*it).first and (*it).second.
[ChangeLog][QtCore][Containers] Added operator-> to the key-value
iterator for QHash/QMap.
Change-Id: I9cfa6480784ebce147fcfbf37fec5ad0080e2899
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This is a follow-up to commit 895939c7f9
to fix deprecation warnings it added.
Change-Id: I3d86655ec2c84c1bdcac9c70436075fc78f2f781
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I446f9ddc8f8de4a0b79b09edb44f7c1496fbc33f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of comparing to absolute values, compare the result from
QDeadlineTimer with the reference clock types from std::chrono. Pass
the test as long as we are within 10% of that reference.
In addition, handle the case where QTest::qSleep sleeps for more than
10% longer or shorter than what is requested, and if so, abort the
test.
Change-Id: If8b77aea55a8c5c53e96427b2fff2f78281d0f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The intended use cases for toString() are the situations where you
can't use operator<<, such as QVERIFY2, Q_ASSERT_X, etc., which means
that it will often be used as an argument to e.g. QString::arg(), where
the user has control over the structure of the message. For that
reason, adding an extra space to the end is not necessary and just gets
in the way.
This amends 658b9697f9.
Change-Id: I0695e6809026a0f92ed783899da80de4fa2a1684
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace with a parser which actually does the job right, fixing
various infelicities in the parsing in the process.
Make the parser strict about formatting.
Adjusted tests to match. Fixed some QTime invalidity tests to each
test only one invalidity at a time (the invalid year and day tests
also used an invalid month).
[ChangeLog][QtCore][QDateTime] The parser for the Qt::RFC2822Date
format is now stricter, requiring the text to exactly match the form
of one of the relevant formats. A valid date or time will still be
parsed, even if the other part of the content is invalid, as long as
it (and any offset, if present) has the right form. In particular, the
parser now rejects texts with trailing cruft (other than space).
Fixes: QTBUG-80038
Change-Id: Id25675afd75f82f6351f20e79f0154f3ceda35ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Much of this test case was testing that the machine it runs on didn't
take more than an expected amount of time, which is an assumption that
won't hold in a virtual environment where the hypervisor might decide
to not allocate any CPU time to the machine at certain times.
Instead, take the samples that we want to compare with once, then
use them as reference for further comparisons.
Also, split the test in two, with the comparison operators and msecsTo
test moved into a separate test function.
Change-Id: I7db12b8e02552f4d63af933c1b0fee9d62b591eb
Fixes: QTBUG-58713
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Flaky fails in this test suggest that the VM on which the
test is executed does not get CPU resources allocated for enough time
to make this test pass. This change makes the test more resilient by
taking the measurements as quickly as possible.
In addition, use a sanity-check based on std::chrono APIs to abort the
test completely if we see that the clock has advanced too far to make
the following tests meaningful.
Change-Id: Ie6ac4ffb52f20e7774014f8222c9cd8f54d8a263
Fixes: QTBUG-64517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Recursively defined entities can easily exhaust all available
memory. Limit entity expansion to a default of 4096 characters to
avoid DoS attacks when a user loads untrusted content.
Added a setter and getter to allow modifying the expansion limit.
[ChangeLog][QtCore][QXmlStream] QXmlStreamReader does now by default
limit the expansion of entities to 4096 characters. Documents where
a single entity expands to more characters than the limit are not
considered well formed. The limit is there to avoid DoS attacks through
recursively expanding entities when loading untrusted content. The
limit can be changed through the QXmlStreamReader::setEntityExpansionLimit()
method.
Fixes: QTBUG-47417
Change-Id: I94387815d74fcf34783e136387ee57fac5ded0c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Following wg21.link/LWG3228, it was found that a proper variant fix
requires that T* -> bool conversions be treated as narrowing
conversions in subclause wg21.link/dcl.init.lst. wg21.link/P1957R2 was
accepted in Prague 2020 as a DR and retroactively applies to older C++
standards.
Since we hard-code the algorithm of [dcl.init.lst], we can and must
add this manually.
[ChangeLog][QtCore][QObject] For the purposes of
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT, pointer
(incl. pointer-to-member) to bool conversions are now considered
narrowing. This matches the resolution of a defect report in C++
itself.
Change-Id: Ifa9a3724c9c8ccd3dd6614928dbbe37477591dc1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
On Windows, the test was leaking a registry key
HKEY_CURRENT_USER\Software\tst_QSettings_trailingWhitespace
Fix by using .ini-Format in the temporary directory created by the test.
Amends e66a878838.
Task-number: QTBUG-22461
Change-Id: If141a9e72e8faebc3fc46b94dab7b4b728a75292
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This template function streams the given object into a QDebug instance
that operates on a string, and then returns that string.
This function is useful for cases where you need the textual
representation of an object for debugging, but cannot use operator<<.
A good example of this is when writing tests where you want to provide
a useful failure message involving details about an object, but must
provide it in a string to e.g. QVERIFY2.
[ChangeLog][QtCore][QDebug] Added static template toString() function,
which streams the given object into a QDebug instance that operates on
a string, and then returns that string.
Fixes: QTBUG-82309
Change-Id: I8411394e899dedad19cec788d779a4515d52ba11
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And move the actual implementation from corelib/io to network/kernel
sub-module.
Fixes: QTBUG-80308
Change-Id: I554b05bae3552c68e1e1a405c169366ee19120b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This also fix the normalization algorithm:
- Some 'const' after pointers were not removed as they should.
- No need to keep the space in '> >' and '< :' in C++11 anymore
- Fix normalization of 'long unsigned int' and similar
Change-Id: I2b72f0fede96c1063e7b155d9f25a85fccfc7bf9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
the QMetaType is represented as a pointer to a "vtable" in the form of
a QtPrivate::QMetaTypeInterface*
The recomanded use of QMetaType is to construct an object with
QMetaType::fromType. This does not require any registration.
There is still an id() function which will do some registration
for compatibility with Qt5. Also the patch does not really touch
the other extra things that can be registered (data stream operator,
comparison operator, iteratable, ...) and this still uses the previous
system.
This is only the change in QMetaType, other changes to use it in QVariant
and QMetaObject will follow
Change-Id: Iffad20085cf33f33447f58a68236013a8b60fdbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It is not possible to exclude targets based on the build configuration
in CMake. loadDebugPlugin() and loadReleasePlugin() will always fail as
both debug and release plugins are built regardless of the build
configuration.
This patch adds the CMAKE_BUILD define and skips the opposite test on
Windows. E.g.: With config = Debug, the loadReleasePlugin() test is
skipped and viceversa.
Change-Id: I2659882604bb39eb11d3e9e2b2b37a2972475285
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QLinkedList has been moved to Qt5Compat. Remove and stop mentioning
it in docs, examples (the docs & examples for QLinkedList itself will
be moved to Qt5Compat) and remove the corresponding tests.
Also remove QT_NO_LINKED_LIST, since it's not needed anymore.
Task-number: QTBUG-81630
Task-number: QTBUG-80312
Change-Id: I4a8f1105cb60aa87e7fd67e901ec1a27c489aa31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
