Commit 125bb81bef wasn't enough. Let's
just make it simpler and use a regular function.
Change-Id: I9627dedaa87873b4b138224afd182e4fd9a55265
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Like before, this is taken from the existing QUrl code and is optimized for
ASCII handling (for the same reasons). And like previously, make
QString::fromUtf8 use a stateless version of the codec, which is faster.
There's a small change in behavior in the decoding: we insert a U+FFFD for
each byte that cannot be decoded properly. Previously, it would "eat" all bad
high-bit bytes and replace them all with one single U+FFFD. Either behavior is
allowed by the UTF-8 specifications, even though this new behavior will cause
misalignment in the Bradley Kuhn sample UTF-8 text.
Change-Id: Ib1b1f0b4291293bab345acaf376e00204ed87565
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should be using qputenv; putenv is deprecated on MSVC.
Change-Id: I7c27cf5f7955624fa3553b7a34ab11c6fae462b8
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the function is a trivial wrapper for the QTextCodec one, so there is
little point in explicitly testing it.
Change-Id: I0c4950e5a54b7ffff9ba73a001cedb517497a596
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Codecs registered by creating new QTextCodec instances should be listed
there.
Task-number: QTBUG-32500
Change-Id: I56c00e0d6bbfef55a6cbd571bcf9aa2cf333ef3a
Reviewed-by: David Faure <david.faure@kdab.com>
Return the codec if one was found by QTextCodec::codecForUtfText,
instead of returning the default (UTF-8).
Task-number: QTBUG-31293
Change-Id: I95e3260376c00537006b7fbfdc3df5850e1ba657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextCodec::codecForHtml currently fails to detect the charset for this
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=9,chrome=1">
<title>Test</title>
</head>
This patch makes the detection of charsets more flexible, allowing for
the use of the HTML 5 charset attribute as well more terminator characters
("'", and ">").
I also added a *_data function for the unit tests.
Task-number: QTBUG-5451
Change-Id: I69fe4a04582f0d845cbbe9140a86a950fb7dc861
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Use ICU to do code page conversion instead of the
builtin text codecs. With this QTextCodec simply
becomes a wrapper around ICU's ucnv_* methods.
We only keep our own codecs for UTF-*, ISO-8859-1,
ISO-8859-15 for performance reasons, and for TSCII
and iscii-* because they aren't supported by ICU.
Change-Id: I4fc49eba55cf772b9772c6dac606a47a44346a60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This allows me to keep the UTF-8 invalid data in one safe place. I
won't need to copy & paste it.
Change-Id: Icb909d08b7f8d0e1ffbc28e01a0ba0c1fa9dccf0
Reviewed-by: David Faure <faure@kde.org>
Rename rows using naming convention used elsewhere in this test.
Change-Id: I8e669cedcc2058cf84cee976c8a0a478bc1cea0a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the codec name instead of just numbering the rows. This eliminates
some duplicate row names. Two duplicate rows have also been removed --
for the WINSAMI2 row, the last value in the row is different, making one
copy do a subset of the testing done by the other, so the row that did
less testing was removed.
Change-Id: I859f681a627e8d3839ca8a4ba09d541bec43d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Remove various disabled and/or non-helpful debugging code.
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure. Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.
Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This change moves utf8/ into corelib, thus
allowing corelib.pro to be deleted.
Change-Id: Ib1b4e0930ac0e116d9bbc242a6dfb63ae5785d19
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There were only two ways the QSKIP could be called: (1) the C++ runtime
is broken, or (2) the earlier call to resize the string failed.
In both cases there should be a hard test failure. In the former case, a
broken C++ runtime calls all of the test results into question. In the
latter case, the QByteArray::resize() method has suffered a regression.
Change-Id: I5adf942d2eb4d746d2ab31e98571c5d9bdd40890
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
