the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like before, this is taken from the existing QUrl code and is optimized for
ASCII handling (for the same reasons). And like previously, make
QString::fromUtf8 use a stateless version of the codec, which is faster.
There's a small change in behavior in the decoding: we insert a U+FFFD for
each byte that cannot be decoded properly. Previously, it would "eat" all bad
high-bit bytes and replace them all with one single U+FFFD. Either behavior is
allowed by the UTF-8 specifications, even though this new behavior will cause
misalignment in the Bradley Kuhn sample UTF-8 text.
Change-Id: Ib1b1f0b4291293bab345acaf376e00204ed87565
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With 46a8885ae4, we failed when parsing
entities whose partially expanded size was greater than 1024
characters. That was not enough, so now we fully expand all entities.
Amends 46a8885ae4.
Change-Id: Ie80720d7e04d825eb4eebf528140eb94806c02b1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Nested references with a depth of 2 or greater will fail. References
that partially expand to greater than 1024 characters will also fail.
Change-Id: Id4e49d6f7cf51e3a247efdb4c6c7c9bd9b223f6e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Added clarifying explanations to the QEXPECT_FAIL statements.
Now it should be easier to understand what is expected from the parser.
Change-Id: I1dacd60564f292d9ce43de7254525c34fa7cdc55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The test is now passing. Tested with intel compiler and vs2008.
Task-number: QTBUG-22285
Change-Id: I728919833d9bcbf71bef68c06baef92667ff074b
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I7e7202e6a1a84699ae0d43e4b2e7ee9ec87ed0b6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed to use QFINDTESTDATA and TESTDATA
Change-Id: Ib738adfb6d0553e4c995ccaa51e34335f00f50f0
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I582732e3dd657df834f9a98fd52d7ee368f2f29b
Reviewed-on: http://codereview.qt-project.org/5946
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
