Commit Graph

311 Commits

Author SHA1 Message Date
Oswald Buddenhagen
caa2263051 use real qmakespec as basis for finding features
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.

Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-27 09:39:51 +02:00
Oswald Buddenhagen
30d1522b7a resolve real qmakespec name right after loading it
this is cleaner than resolving it on-demand, as it avoids statics (with
potential side effects on dynamic spec switching).

Change-Id: I2bc15a4c3108376e1b4a01351875fe0c445ee5d5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
32bc46a90b remove support for loading features relative to current directory
it's completely counterproductive. just include() the file instead.
i don't think anyone knew about this "feature", so just removing it.

as a side effect this removes the repeated existence check of already
found feature files, as we can use a clean else-if cascade.

Change-Id: I5d38d38d0a897f2e8857ac68d5649fd4367941c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
4753958db7 revamp handling of qmake target mode
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.

Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
777fa561ab read spec_pre and spec_post features
these are read before the qmakespec and before the cache, resp.
this will allow moving some hard-wired logic out of qmake.

Change-Id: I6a63050d7798bc30a4add8c009bcd801a29a0deb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
88b4ee22c9 prune feature search paths which don't actually exist
this should significantly cut down the time wasted looking for files in
non-existing directories, in particular on windows.

Change-Id: I7ab3523fe8c028e3787ebc78e4543ab04f53448e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
5ced28ed3f eliminate some use of base_vars
this limits references to this variable to its setup and explicit cache
manipulation.

Change-Id: I88dd2418051501abea201f223da7759a15f1c249
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
757cad45d7 purge the integrity target mode
it wasn't really wired, so the only effect it had was disabling the unix
scopes (despite an attempt to override that in the spec, which probably
worked before qt 4.6, and will start working again soon).

Change-Id: I95daff75b508edaf83a8a06fd327350acd62b124
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
0ce1a6ba24 don't let the make spec determine the host mode any more
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.

Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
2012-06-27 09:39:50 +02:00
Oswald Buddenhagen
fc1bca8608 repurpose -unix/-macx/-win32 options
they have been deprecated long enough, so we can mess with them now.
don't make them set the target mode any more; the makespec can do that
autoritatively. instead, they can be used to override the host mode for
debugging purposes.

Change-Id: Ife5fdcf4f1b6b926901a80896ac92b7d821278d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-27 09:39:49 +02:00
Oswald Buddenhagen
003d294cd6 clean up specdir()
the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.

Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-26 19:29:34 +02:00
Oswald Buddenhagen
851d666bcc fix -spec/-xspec argument re-assembly
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.

Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-26 19:29:23 +02:00
Oswald Buddenhagen
ed96d199f1 fix somewhat common edge case in $$shadowed()
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.

Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-26 08:14:17 +02:00
Simon Hausmann
03e3fa5dd1 Fix return type of isActiveConfig("host_build")
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.

Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-24 21:22:51 +02:00
Bjoern Breitmeyer
00f9ac93c2 Fixed Wince Makefile environment
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince

Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:09 +02:00
Oswald Buddenhagen
575a516630 revamp automatic makefile generation for sub-projects
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.

on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.

it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).

Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
2012-06-19 16:46:08 +02:00
Oswald Buddenhagen
5290f6df89 introduce $$QMAKE_CHK_EXISTS_GLUE
instead of hard-coding platform differences, use a variable.

Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:07 +02:00
Oswald Buddenhagen
3c144b54cf normalize $$QMAKE_QMAKE
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.

Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:07 +02:00
Oswald Buddenhagen
46d35cc566 fix in-/out-dir mixup
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.

Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:06 +02:00
Oswald Buddenhagen
4fdd663208 remove unnecessary conditional
the code above already deals with the differences

Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:06 +02:00
Oswald Buddenhagen
d83619f65f remove duplicate assignments of MKDIR & CHK_DIR_EXISTS
Change-Id: I314659a1ba25227380176dc65a9c81e3c6df28c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:06 +02:00
Oswald Buddenhagen
a40469ce57 unobfuscate makefiles re $(CHK_DIR_EXISTS)
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.

Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:06 +02:00
Oswald Buddenhagen
76f0ce06e2 make 'qmake_all' targets respect .depends and CONFIG+=ordered
Change-Id: I010a9886ee0d40e4319cb6bd873b038336a42111
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:05 +02:00
Oswald Buddenhagen
2bbd50c6e4 make 'qmake_all' target of SUBDIRS projects properly recursive
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.

Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:05 +02:00
Oswald Buddenhagen
76ed07168d make 'qmake' target of SUBDIRS projects non-recursive
that's consistent with other projects. 'qmake_all' can be used for
recursion.

Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:05 +02:00
Oswald Buddenhagen
0e6ddb71cc don't use $(MAKEFILE) to refer to SUBDIRS' makefiles
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.

Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:05 +02:00
Oswald Buddenhagen
91cf67c85d do not add "/." to _PRO_FILE_PWD_
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.

Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:04 +02:00
Oswald Buddenhagen
426d1ef0c1 allow projects to suppress qmake recursion
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.

Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-19 16:46:04 +02:00
Oswald Buddenhagen
e78c3bb620 look for mkspecs/ even below .qmake.cache/.conf-determined root
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.

Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
2012-06-19 16:46:03 +02:00
Oswald Buddenhagen
1f83f0cf2a add support for a super cache
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.

Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:03 +02:00
Oswald Buddenhagen
16d5b6911f look for .qmake.conf files
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.

Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
f86f3613a5 find .qmake.cache for subprojects independently
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.

Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
c80697cfbe allow setting QMAKEPATH and QMAKEFEATURES in .qmake.cache
Change-Id: Ie383abb57c06cb49d38345d64750837b8fe14c70
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
e894155a41 don't duplicate project_build_root's calculation needlessly
Change-Id: Id2f343c450149b13b52c2cae8eb6eb4bfd73fc03
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
a07d4f8fb3 remove some symbian cruft
- Option::mmp_ext
- references to dead QMAKE_INTERNAL_ET_PARSED_* variables

Change-Id: I863605b23798cbca3f6c8ab5a154fd432f1f4dcc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
7d44bd0646 remove last traces of js support
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.

Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:01 +02:00
Oswald Buddenhagen
ad92c6c7de make splitPathList() return an empty list for an empty string
this makes the user code a bit cleaner

Change-Id: I3713c73c5c19cf69341be65480917eda0b967b77
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:00 +02:00
Oswald Buddenhagen
6a8f64136e introduce /get property variants
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.

this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.

Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
ab0d55e361 purge unused VcprojGenerator::findTemplate()
it looked fishy for years. now i know why. ;)

Change-Id: I822cadecaf8d914f383f9f907b92507852e434b4
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
b35d8e651b don't generate make_default targets
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.

as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.

Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
c85dc033dc add $$reverse() function
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.

Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
083f7c501f add $$shell_quote() function
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.

Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
09e01856b0 add $$absolute_path() and $$relative_path()
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()

Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
d8e6c49bfa add $$native_path() function
more or less QDir::toNativeSeparators(QDir::cleanPath())

Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
f97913f2da add $$clean_path() function
just QDir::cleanPath()

Change-Id: I2d51e2385939d8926c00f296537ab7f6757d9a79
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
1261c9b2f4 add $$format_number() function
Change-Id: I04266c1f5fb72af94073f3f508cee59085e365b6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
bf984d5f24 add $$shadowed() function
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.

Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
6a66fef520 add $$val_escape() function
this quotes the elements of a variable in a way suitable for re-parsing
as qmake code.

Change-Id: I0e6ea2478c43b5aeff45f485a48ac8c86705dd4a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
ade089907b add $$enumerate_vars() function
this simply returns the keys of all variables in the context.

Change-Id: I0092f827744fcd257dfb9e7ca664c87c6f1cc763
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
1388199d4f make defined() support testing definedness of variables
Change-Id: I58d2dd402d72ee5a19012a6b5a4ba111717d40cc
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
7da934d776 add mkpath() function
Change-Id: I8809b9ee4e85fbe8cec95641d659f237c5f51a26
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
b500397809 add log() function
this is a literal print to stderr.

Change-Id: Ib0a2f53373ebbc4e0bda07a38d656bce145b31cf
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
064a5a08d2 add touch() function
this is equivalent to unix "touch --no-create --reference <ref> <file>".
QFile has no setLastModified() (even though QFileInfo has
lastModified()), so the implementation is low-level.

Change-Id: I6783e8f2613e168ad0c24e79e7384d5b2e4901ee
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
84614cabfa add write_file() function
this dumps the contents of a variable into a file. each element of the
variable is considered a line; line terminators are added. all missing
directories are automatically created.

Change-Id: Idafeb873cea64e6705c894b3ab0ef21df69e7170
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
2702f7637e add cache() function
this function adds the current contents of the named variable to the
cache. this comprises populating base_vars and appending an assignment
to .qmake.cache. if no cache file exists yet, it will be created in the
current output directory (and inherited by subdirs projects). if called
without a variable name, only create the cache file if missing.

Change-Id: I1e81c2238aa6a5817a6ebbfb022e2b995c349363
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
64f475aabd add "blob" and "lines" modes to $$cat() and $$system()
this bypasses the otherwise done insane word splitting

Change-Id: Ia9b8980bc0770de3999544a06d239f55fb34f801
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
7d8578418d properly declare the host tools as such in the project files
don't mess with the qmake cmdline args any more.

Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:50 +02:00
Oswald Buddenhagen
14bbab09c1 introduce ability to build projects for the host system
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.

the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.

Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:49 +02:00
Oswald Buddenhagen
528192a78b Revert "make default_pro.prf advertize dynamically created .qmake.cache"
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.

Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:49 +02:00
Oswald Buddenhagen
4e9cbfc90f Revert "move .qmake.cache search to Option"
We are now moving in the exact opposite direction.
This logically reverts commit 059200a44b.
Some adjustments were necessary to maintain the project root stuff.

Conflicts:

	qmake/main.cpp
	qmake/option.cpp
	qmake/option.h
	qmake/project.cpp

Change-Id: Ic14fa571cbbfe9ac159f92493e49741d70a87eff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:49 +02:00
Oswald Buddenhagen
d8b2998dae Revert "move finding the makespec to Option"
Needed for an upcoming revert.
This reverts commit 74a6669fa7.

Conflicts:

	qmake/option.cpp
	qmake/project.cpp
	qmake/property.cpp

Change-Id: I56088506d27bf1f095f9261c75224f4bee17ec60
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:49 +02:00
Andy Shaw
4524187129 Remove unnecessary code from the XCode generator
Since we only support XCode 3 and later, then all of the legacy code can
be safely removed.

Change-Id: I9be8555aaa62c716b2277c2b97f41aa02d27ef13
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-06-12 17:40:21 +02:00
Debao Zhang
e5bd2ed18c qmake can not process project file with UTF-8 BOM
Project file contains UTF-8 BOM can't processesed by qmake and will
cause subtle errors.

Task-number: QTBUG-25848
Change-Id: Id69ed38c6be63a29fa3792a631cb8cb0ac176148
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-05-30 01:54:45 +02:00
Andreas Holzammer
1a4f58d3e6 Add Visual Studio 11 mkspec
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.

Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-05-16 13:34:20 +02:00
Thiago Macieira
28aa3324de Port away from QString::{to,from}Ascii in qmake
Properly use from/toLocal8Bit when referring to user data, even file
names.

Change-Id: I8fc7afa2ea570f8b1b1eecf354f01d6dfe0883cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-05-14 17:33:04 +02:00
Thiago Macieira
fd63acdc83 Don't use the QRegExp methods that modify the object [qmake]
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.

QRegularExpression has no such shortcoming.

Task-number: QTBUG-25064
Change-Id: I6b2d2530238a7e04b44859664a2962f2f466ee30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-23 19:20:19 +02:00
Mark Brand
8e053a5dfc fix static library names when generating .pc files for pkgconfig
219a688ac1 added the version extension
which only occurs on the DLL import library.

Change-Id: Ie913adf039d7f3a9aadf43f4af014289a8aeacbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Hib Eris <hib@hiberis.nl>
2012-04-19 19:46:07 +02:00
Lars Knoll
64255ef650 Merge remote-tracking branch 'origin/api_changes'
Change-Id: I964b0a6f5c38351fdfafb8a2a128a349ff8c89d1
2012-04-17 12:58:52 +02:00
Joerg Bornemann
ac7dd2782f qmake vc(x)proj generator: don't create bogus directories
When creating the temporary project object,
Option::output_dir must be adjusted temporarily.

Task-number: QTBUG-22788
Change-Id: Ibf8897a46b63f48b9e33d7e2168b09e559cecec7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-17 03:26:32 +02:00
Joerg Bornemann
8987e5d2cb qmake/Win: fix incomplete generated version resource
Since Windows Vista the resource language must be included to
make the version information visible in Windows Explorer.

Two new variables have been introduced:
RC_LANG (default: 1033) - resource language
RC_CODEPAGE (default: 1200) - resource codepage

Task-number: QTBUG-23218
Change-Id: I29e102d19501e3b7a43d5096fc4806bc38a4d846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-17 03:26:32 +02:00
Joerg Bornemann
31cfe5ca1b qmake vcxproj generator: fix handling of /MANIFEST:NO linker option
Task-number: QTBUG-23513

Change-Id: I5dd6fb6fd7910e43acd28057133a3ad6613cfc1a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-17 03:26:32 +02:00
Joerg Bornemann
ee4d723ecc qmake: QMakeProject::intValue added
For variables that are supposed to contain a single int,
this method returns the numeric value.
Only the first value of the variable is taken into account.

Change-Id: Ifa11ba5ac044e0a4703a387a9bcf02043e4681d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-17 03:26:32 +02:00
Joerg Bornemann
65425be8fe qmake vcproj generator: unused variable removed
Change-Id: Iaf8bb1772846001297e1a421c3860f5e4d090a35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-17 03:26:32 +02:00
Lars Knoll
9bd0323551 Merge remote-tracking branch 'origin/master' into api_changes
Conflicts:
	configure
	src/corelib/io/qurl.cpp
	src/gui/kernel/qwindow.cpp
	src/tools/moc/generator.cpp
	src/widgets/kernel/qwidget_qpa.cpp
	src/widgets/styles/qstyle.h
	src/widgets/widgets/qtabbar.cpp
	tests/auto/corelib/codecs/utf8/tst_utf8.cpp

Change-Id: Ia457228d6f684ec8184e13e8fcc9d25857b1751e
2012-04-16 12:04:34 +02:00
Joerg Bornemann
99a2074369 qmake vc(x)project generator: fix VC++ Express detection
If VC++ 2010 Express and VC# 2010 Express are installed, then the
installation path is written in two places into the registry.
We're now filtering detected installations with the same installation
path.

Task-number: QTBUG-24956

Change-Id: I401430e7aa81d96c523d8172d2a2e9d40ebdb3ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-12 04:15:05 +02:00
Oswald Buddenhagen
143c4d3e13 Merge remote-tracking branch 'origin/master' into api_changes
Conflicts:
	configure
	src/widgets/styles/qwindowsxpstyle.cpp
	tests/auto/gui/kernel/qwindow/qwindow.pro
	tests/auto/gui/kernel/qwindow/tst_qwindow.cpp

Change-Id: I624b6d26abce9874c610c04954c1c45bc074bef3
2012-04-10 15:31:45 +02:00
Thiago Macieira
7ae76153cb Remove -DQT_NO_STL from the bootstrapped builds
Change-Id: I37ea06426b66e617a49ec46952abdaad8814eadf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
2012-04-07 05:19:56 +02:00
Joerg Bornemann
0174c966f7 qmake vcxproj generator: properly escape XML attributes
Task-number: QTBUG-24954

Change-Id: I21299440ba3f268c2fa1e14d37003cdc3e6a35ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-05 17:48:15 +02:00
Giuseppe D'Angelo
33984e72ab QHash security fix (1/2): add global QHash seed
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.

This patch adds a global integer, to be used as a seed for the hash
function itself. The seed is randomly initialized the first time a
QHash detaches from shared_null.

Right now the seed is not used at all -- another patch will modify
qHash to make use of it.

[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html

Task-number: QTBUG-23529
Change-Id: I7519e4c02b9c2794d1c14079b01330eb356e9c65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-04-03 19:12:13 +02:00
Yuchen Deng
c7f8f459bd Fix build all failed for 'TEMPLATE = aux'
NMAKE : fatal error U1073: don't know how to make 'all'
Stop.

Change-Id: I387a417d37e38811706a1ff460df8ee581c6a33f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-04-02 12:41:32 +02:00
Jędrzej Nowacki
fb650b0271 Compile QArrayData in bootstrap phase.
This change will be needed during migration from QByteArrayData to
QArrayData.

Change-Id: I0c8d6f9ed3ef7c33af62736af55259a8f9a70c0f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-29 11:28:41 +02:00
Thiago Macieira
af3c7d35b6 Fix qmake's use of Q_ASSERT with side-effects.
The nice side-effect of having Q_ASSERT use the condition twice is
that we break code that has side-effects.

Change-Id: Ia0b7ed2a8030c8e222612af95eb2d58671433110
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-28 21:24:43 +02:00
Thiago Macieira
6ab6b0fc1c Disable QUrl support in QVariant in bootstrapped mode
The only use of QUrl in qmake, moc, uic and rcc is due to QVariant's
internals, so let's disable it. This means those binaries are now
probably a lot smaller since the parsing and IDNA code don't need to
be present.

Change-Id: Ie156b0817d119b2ba5d3dcb9712a9fea2ee7d4a1
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
2012-03-24 16:30:58 +01:00
Kent Hansen
95d6f8a4cf Merge master into api_changes
Conflicts:
	src/corelib/tools/qvector.h
	tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp

Change-Id: I877256e95f3788e617437f4e9661a88047f38cd6
2012-03-19 10:03:48 +01:00
Marius Storm-Olsen
fbc251b364 Win32: Compile qmake when shadow-building
Change-Id: I803c733f744372701c51e4d629ff797c6648f833
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-18 12:36:48 +01:00
Olivier Goffart
3abc6be685 Build qmake with QStringBuilder.
QStringBuilder will be enabled by default so qmake should build with it.

qstringbuiler.cpp has to be compiled in just for the convertFromAscii
(The alternative was to build with QT_NO_CAST_FROM_ASCII, but that would
be too much work)

Change-Id: I1fbeed7ed8a9d3bc38ef591a687c50644980e2fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-16 23:02:15 +01:00
Oswald Buddenhagen
c0791b86ab allow the unix generator to run in windows host mode
this is a complete bastardization of the concept and breaks the (unused)
debugging feature to create proper unix makefiles under windows, but
apparently it permits cross-compiling unix targets under windows.

Change-Id: I4ee95a20e7d6a6b2063ec7aa22f52c1a97d78a77
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-16 18:12:41 +01:00
Lars Knoll
d5098f2802 Merge remote-tracking branch 'origin/master' into api_changes
Conflicts:
	tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp

Change-Id: I884afc3b6d65c6411733a897a1949e19393573a7
2012-03-12 21:03:49 +01:00
Sean Harmer
2dd6f1467f Allow qmake to find features when using mkspecs in nested dirs
Commit 8e5eb1bddc introduced the assumtion that mkspecs are
immediately below the mkspecs directory itself. This is not true for
e.g. unsupported/blackberry-armv7le-qcc.

This commit restores qmake's ability to find the "root" of the mkspecs
collection no matter how deeply the actual mkspecs are nested.

Task-number: QTBUG-24665
Change-Id: I98faaf8e6ae7b8524277aea6c17e685e507e37b3
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-12 11:09:24 +01:00
Oswald Buddenhagen
aed6eaa5b2 QT_RAW_INSTALL_FOO => QT_INSTALL_FOO/raw
this makes the "sysrootable" properties more magic, with the raw
versions being omitted from the qmake -query output and automatically
falling back to the "cooked" variant if there is no sysroot set.

this makes the "normal" qmake -query less noisy. this will become even
more obvious when i add more "overloads" of the properties.

Change-Id: I08000986427264ec6238c8fe0a77f5cecdbf1201
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-12 11:01:02 +01:00
Oswald Buddenhagen
197ba93cf0 rip out -incremental from configure
the feature is rather obscure and unlikely to be used by anyone.

Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-12 10:59:44 +01:00
Oswald Buddenhagen
46e51ce1dd do not copy/symlink qmake to build dir
make is perfectly capable of doing shadow builds

Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-09 14:23:15 +01:00
Oswald Buddenhagen
2640b71be4 remove support for QMAKE_PLATFORM_DIR
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.

Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-08 23:52:34 +01:00
João Abecasis
12f221410f Merge remote-tracking branch 'origin/master' into api_changes
Change-Id: I89dc2e193bd01624c1fb50484610d516e39b1538
2012-03-08 01:27:39 +01:00
Oswald Buddenhagen
6c612c9338 move postProcessProject() call to sane location
there is totally no reason to call it unless the project is actually
used for makefile generation, and the excessive calls actually mess up
things.

Change-Id: Idb7912a5404f6054010d2f29cce820a167de4f6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-07 22:46:29 +01:00
Oswald Buddenhagen
4958c138a7 don't add bogus /mkspecs to QMAKE_MKSPECS
the project build root can of course be empty - if there is neither an
mkspecs/ nor a .qmake.cache - or no project in the first place (-query).

Change-Id: I9595b0b4ad80a9086dcd48c9ae62b3e8bd1b6f2f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-06 21:50:25 +01:00
Thomas McGuire
11f9d18731 Fix finding specs in the unsupported/ directory.
The -spec argument was interpreted as a relative directory as
soon as it contained a slash. Fix this by checking if the
directory exists before attempting to interpret it.

Change-Id: Ide8f0418abc719b0be582d2d72642a141f6c6dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-06 17:47:46 +01:00
Max Desyatov
9d5e721e96 escape *_script_file usages in MingwMakefileGenerator::writeObjectsPart
Task-number: QTBUG-24595
Change-Id: I1e78a6015247b9e41ae2b05b50fdedf0613f00f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-06 12:28:26 +01:00
Oswald Buddenhagen
52843c1988 de-duplicate feature and mkspec root candidate lists
Change-Id: I03f5b5903a133e5386b9ebef640ddbacdf3ebcd4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-06 12:28:18 +01:00
David Faure
dc75c20397 Split up base class QFileDevice for open-file operations (read/write)
This will be used later on as a base class for QTemporaryFile and
QSaveFile.

Change-Id: Ic2e1d232f95dc29b8e2f75e24a881ab459d3f037
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-03-06 12:09:57 +01:00
Oswald Buddenhagen
84ddc06380 do not re-evaluate spec+cache in build passes
clean up the somewhat convoluted code paths which forced re-evaluation.
now that the spec+cache are evaluated in a completely clean context
anyway, there is no point in re-evaluating them for build passes.

Change-Id: I12279083238e9ca7028af97f45e2638c8dc715b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-06 06:34:49 +01:00
Oswald Buddenhagen
703ef4f79e make QMakeProject's copy c'tor actually behave like one
instead of initializing base_vars with the original's vars, initialize
vars itself. this has two consequences:
- there is no need to call read(0) to initialize vars
- one cannot usefully call the complex read() anymore, as that would
  re-initialize vars from base_vars

this is much closer to an actual copy than the previous "seeding with
existing project".

Change-Id: Ib007bc5b779aedb680a27329aa578f7c604a4308
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-06 06:34:47 +01:00
Oswald Buddenhagen
a91c997238 give load()/include() with target and infile()/$$fromfile() a clean environment
load()/include() with a target namespace would inherit the current
context. however, if you source a project with all bells and whistles,
this makes completely no sense and may be actually counterproductive.

infile()/$$fromfile() would have interited only the functions from the
current context. that was only a hack to support abusing them.

Change-Id: I2e992b923d9e5b0e5056001ca49b35de573abc63
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-05 14:46:36 +01:00
Oswald Buddenhagen
deb3c134b5 remove injection of default_pre in infile()/$$fromfile()
this is a hack from the times when these functions were (ab)used to
inspect proper project files, but the inclusion was done with a clean
project, so that the included files did not have any functions to work
with.

Change-Id: I19925e8ead597ca38df040000c183e368b32c06d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-05 14:46:12 +01:00
Lars Knoll
96232be146 Merge remote-tracking branch 'origin/api_changes'
Conflicts:
	dist/changes-5.0.0
	mkspecs/features/qt_module_config.prf
	qmake/project.cpp
	qmake/property.cpp

Change-Id: I6e4af40743a9aeff8ed18533a48036e332acc296
2012-03-04 21:45:05 +01:00
Oswald Buddenhagen
c679b2f0a6 get rid of Option::user_configs
merge them into before_user_vars. they are evaluated right after another
anyway.

Change-Id: I11859284b363fee01233f6e20989444fef711d0d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 21:33:08 +01:00
Oswald Buddenhagen
a30074bab8 remove now unused QMakeProject c'tors
Change-Id: Ia65d49df50a5610bbd88417ca90ac348a774a1e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 21:33:08 +01:00
Oswald Buddenhagen
dce3821b8a make evaluation of spec+cache independent of build pass context
don't inject the build pass specific variables into the project even
before evaluating the .spec file and the .qmake.cache. they are not
supposed to base configuration on that - feature files should do that
later.

the immediate advantage of this is that base_vars is never manipulated
upfront any more, which allows for cleaner setup paths. also, we can do
more caching of the spec+cache contents.

Change-Id: I19d7f8bec1fb7c3b54121e26794340b287055ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-02 21:33:08 +01:00
Oswald Buddenhagen
93ee903da7 clean up build pass project initialization
instead of messing with the Option singleton, add a way to inject
extra config values into QMakeProject.

Change-Id: Ia347dcc38af2c72913e30ebf5c2b4044f93b4f5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 08:43:21 +01:00
Oswald Buddenhagen
74a6669fa7 move finding the makespec to Option
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.

Change-Id: I07c66d95a9ae01a664cec17564995311fb78ec9b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 08:43:06 +01:00
Oswald Buddenhagen
c3a1af63ae search for default spec just like for other ones
that way qtbase will find its spec without hacking .qmake.cache.
note that passing "-spec default" on the command line would have already
triggered the normal path, so artificial limitation did not even provide
safety against abuse (it is arguably pointless/counterproductive for
other projects than qtbase to have a default spec).

Change-Id: Ib0c3e6498fd70cd6f9561951d72a47165878bb33
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 01:06:22 +01:00
Oswald Buddenhagen
054051d91f remove some bogus include locations
nothing to be found in <sourcedir>/include.
neither in <builddir>/src/corelib/xml.

Change-Id: I381391a64542dc2ac7b421b6646c60a1b7a14639
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:22:00 +01:00
Oswald Buddenhagen
5515b48ac9 use VPATH to locate sources
makes the file a "tad" more concise

Change-Id: I81d9721942890659ac93b32f5988f9c005c88e87
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:21:48 +01:00
Oswald Buddenhagen
d9bf972e2b merge Makefile.win32-g++{,-sh}
the only difference is in the copy & del commands. the msys tools are
tolerant about windows paths, so this just works.
the in-makefile variant detection is stolen from tools/configure/.

Change-Id: Ia283c1fe2e2aaa8cd5b1dfd7ae29244115f07d65
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:20:44 +01:00
Oswald Buddenhagen
012f799254 revamp -sysroot and -hostprefix handling
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.

the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.

-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.

adapted the qmake feature files and the qtbase build system accordingly.

Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:18:23 +01:00
Oswald Buddenhagen
0bb99c6ff3 cosmetics: remove redundant conditional, add a comment & reshuffle code
Change-Id: I71c7e18db63f3581b8c818ad178aeb4f6ccf9446
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:12:13 +01:00
Oswald Buddenhagen
8e5eb1bddc look for features relative to spec only in advertized place
that is, spec/../features/ (i.e., mkspecs/features/) - and not any
directory up to the root.

Change-Id: Ie5fdf2898fba5ac93583571edc24629471604798
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:12:05 +01:00
Oswald Buddenhagen
c0e9041b6d optimize QMakeProperty
make it table-driven and have it cache the immutable values from
QLibraryInfo.

Change-Id: I07ed89152aa964bc9edf4436ee7c42f99cc6bcd3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 21:00:23 +01:00
Oswald Buddenhagen
4494ddfec7 make default_pro.prf advertize dynamically created .qmake.cache
moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.

Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 19:00:15 +01:00
Andy Shaw
221fe8776b Add support for XCode 4 into qmake
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too

Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-03-01 00:09:57 +01:00
Oswald Buddenhagen
8516194633 don't duplicate QLibraryInfo declaration
there is no reason for doing that. there is even reason for *not* doing
it (the enums running out of sync).

Change-Id: Ieb7d015ca497a6675cc85da4c2e0af0c1533dd7a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-29 15:53:21 +01:00
Rohan McGovern
98dd1781d9 Merge master -> api_changes
Includes fixes for tst_qfiledialog2, tst_qtextedit autotests on mac.

Change-Id: I49cac26894d31291a8339ccc1eb80b6a940f0827
2012-02-29 09:23:14 +10:00
Hib Eris
78faefdbb1 Implement missing replacements when installing .pc files for win32
This implements replacements for win32 makefile generators similar
to the replacement functionality in unix makefile generators.

To enable Makefile code generation for replacements in win32 makefile
generators, you must set QMAKE_STREAM_EDITOR to e.g. sed.

When building for win32, sed is normally only available in the
mingw/msys build environment and when cross compiling on unix.
In these cases QMAKE_STREAM_EDITOR is set to sed in qmake.conf.

For other win32 build environments QMAKE_STREAM_EDITOR is not set
in qmake.conf and the replacements Makefile code is not generated.

Change-Id: Ie5de5d517eafaeaa2544f1e972aec3fe11d0a6f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-29 00:05:38 +01:00
Oswald Buddenhagen
65b42dd4c8 look for mkspecs in the project root, not next to every project
qmake would look for mkspecs/ in the directory containing the current
project file. this makes completely no sense with recursive projects:
a) nobody would make per-project specs and b) specs meant to be global
would not be found.

consequently, we look for a project root when starting qmake and use
only that directory.
if .qmake.cache is found/set, we assume that to be the project root.
otherwise, we search for mkspecs/ the same way we search for the cache -
just to up until we find one or hit the root. if we are shadow-building,
search the build dir as well.

Change-Id: Ie66b189a40c21203d956e681cbef44a89f98cd17
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-02-29 00:05:38 +01:00
Oswald Buddenhagen
08fe1f6871 resolve relative spec paths already on the command line
this is way more predictable than resolving it later.

Change-Id: I0ce27977b795bde9235e1d51d6f2d0d917f2398c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-28 09:13:47 +01:00
Oswald Buddenhagen
059200a44b move .qmake.cache search to Option
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.

Change-Id: I11ef30a8227afed06e58e64e65809dba25e81567
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-28 09:13:31 +01:00
Oswald Buddenhagen
bf29a8a27d don't look for features in PrefixPath
it's generally redundant with DataPath which we already look into.
this is consistent with where mkspecs are looked for.
i don't think anyone will notice this "loss" ...

Change-Id: Iab7c35cc22ba53e1005f26b5d85d41cf4dafad07
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-28 09:13:00 +01:00
Oswald Buddenhagen
dd7befcfd8 scope context saving more minimally
no point in saving the context when we are not actually modifying the
current context.

Change-Id: Id6f51a163e86bdf402aa0713737b655db68e7ee8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-02-28 09:12:30 +01:00
Oswald Buddenhagen
e76d72aec5 don't generate bogus TARGETs
Change-Id: Ia99cd8862157e5630506d02b3c7e9b35d4bc3302
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-27 20:52:45 +01:00
Oswald Buddenhagen
e34ee31270 remove fallback re-initialization of TARGET after parsing project
we already initialize it before parsing a project. if a project is daft
enough to clear TARGET, it does not deserve differently than breaking.

Change-Id: I6c727bc27d72a00e84b676ae3c169024bdb2d929
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-26 13:23:49 +01:00
Marc Mutz
8397a44bed QByteArray: deprecate QT_NO_CAST_FROM_BYTEARRAY-protected operators
The QByteArray::operator const {char,void}*() implicit
conversions are a source of subtle bugs, so they right-
fully can be disabled with QT_NO_CAST_FROM_BYTEARRAY.

  const char *d = qstring.toLatin1(); // implicit conversion
  while ( d ) // oops: d points to freed memory
     // ...

But almost no-one ever enabled this macros in the wild
and many were bitten by these implicit conversions, so
this patch deprecates them.

I would have liked to remove them completely, but there
are just too many occurrences even in Qt itself to hope
to find all conditionally-compiled code that uses these.

Also fixes all code that needs to compile under
QT_NO_DEPRECATED (in qmake/, src/tools/).

I984706452db7d0841620a0f64e179906123f3849 separately
deals with the bulk of changes in src/ and examples/.

Depends on I5ea1ad3c96d9e64167be53c0c418c7b7dba51f68.

Change-Id: I8d47e6c293c80f61c6288c9f8d42fda41afe2267
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-02-26 09:14:11 +01:00
Hib Eris
219a688ac1 Add TARGET_VERSION_EXT to pkgConfiglibName
The libName that is used in pkgConfig files should include the
TARGET_VERSION_EXT.

This is needed because in Win32MakefileGenerator::fixTargetExt(),
the TARGET_VERSION_EXT is added to the library name.

In Win32MakefileGenerator::processVars(), if TARGET_VERSION_EXT is empty,
it is set to VER_MAJ.

On platforms != Windows, TARGET_VERSION_EXT does not seem to be used.

We probably got away with this so far because pkgconfig files generation
for win32 was just added in 4.8 and nobody uses them yet, and because on
platforms != windows the TARGET_VERSION_EXT is not used.

Change-Id: I56f239e389f0ef926030e4c2376cadd92c4f673c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-24 16:21:37 +01:00
Hib Eris
cbf8f03cf4 Create target pkgconfig dir in qmake generated Windows Makefiles
Change-Id: Icea70987ee3c6040ca3ba278a578849cb74156f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-24 11:29:43 +01:00
Rohan McGovern
8583bc914a Fixed resolution of QMAKESPEC on Windows.
base_vars["QMAKESPEC_ORIGINAL"] is not guaranteed to be set the first
time resolveSpec is called, since an include() can wipe it out.  Change
it so that resolveSpec is called repeatedly until some
QMAKESPEC_ORIGINAL is set.

The code which attempted to remove all of the path up to the last / was
incorrect and must have been dead code (or its wrongness didn't matter)
until now.

Change-Id: I2b31ae10fc284ac7293c3cd95e5a2fd503ca7ab0
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-02-23 21:51:24 +01:00
Andreas Hartmetz
553ffa0118 Revert "Escape project file name in makefile rebuild rules."
It was the result of miscoordination between Andreas Holzammer and me,
duplicating the functional change of commit
ea2c9f764f.
This reverts commit 8b7a9b4898.

Change-Id: I9a47746c1c12ca00b2dc5c5d50e99f9bf990e3f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-23 16:38:45 +01:00
João Abecasis
7bbe79fe5f Drop file-engine abstraction from public API
This abstraction imposed serious performance penalties and is being
dropped from the public API.

In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.

Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.

For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.

[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]

Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.

Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.

Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-02-22 00:07:31 +01:00
Oswald Buddenhagen
a0da58b5dd make resolution of default spec less inefficient
resolve only once, in particular on unix.

Change-Id: I090698fc6029322a3a16d179d461af3e8336f6ad
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-02-21 22:31:00 +01:00
Oswald Buddenhagen
d5afe6e7e4 remove bizarre late feeding of user_configs into base_vars
there is no obvious reason why this should happen. if base_vars is used
again, the user configs will be parsed again, too.

Change-Id: Ib56e01a468cdb5e81d610bcaf0163bf730cbae05
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-02-21 18:41:40 +01:00
Stephen Kelly
7a7d82ffd9 Implement QMAKE_SUBSTITUTES.config = verbatim.
Change-Id: Ie0b333fa7fae2283e99e42f9cd7bab4e84991f40
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-11 13:30:31 +01:00
Andreas Holzammer
8b7a9b4898 Escape project file name in makefile rebuild rules.
Change-Id: I5407c2477613119b5aea2d00eb88cc24d35788ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-11 13:30:31 +01:00
Oswald Buddenhagen
8f7716c32c lower qmake optimization level on msvc
-O2 triggers an optimizer bug where compiling unixmake*.cpp would take
several minutes each. -O1 is not measurably slower, so use that instead.

Change-Id: Ibf8abbecdd69e35cef800841f781543121168f76
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-10 15:23:01 +01:00
Andreas Holzammer
e5830479d6 Escape Dependencies of precompiled header right.
Change-Id: I847c85250b78a934bd29e09250d209d9ef412f7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-10 11:24:48 +01:00
Oswald Buddenhagen
af93c70de7 consolidate Read* options
this brings some clarity which combinations are actually possible, which
allows for some optimization later on.

Change-Id: I930027e426c5f9abea8d21eb1ebaa39bd29787b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-09 22:11:13 +01:00
Kai Koehne
be98fa32c7 Allow customization of qDebug output at runtime
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
 %{message}, %{type}, %{file}, %{line}, %{function}

The original cleanupFuncinfo was written by Thiago Macieira.

Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
2012-02-09 18:11:21 +01:00
Giotis Nikos
6b807a283c Fix qmake evaluation of QMAKE_TARGET.arch on msvc2010 x86_64
This change is needed because msvc2010 tools have a '\' character at
the end of environment variable VCINSTALLDIR. This variable on msvc2008
does not have this '\' character at its end. Without this change
QMAKE_TARGET.arch on msvc2010 x64 evaluates to x86 instead of x86_64.

Task-number: QTBUG-22686

Change-Id: Ifba833e9361c97568b8b3de9976023e8537b208a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-02-08 07:48:43 +01:00
Friedemann Kleint
9f54846d95 qmake: Work around MSVC compiler bug.
Disable optimization for getProjectUUID() as it triggers
ASSERT: "&other != this" at qstring.h:720 with -O2.

Change-Id: I51b31d4318ba9be187c186623099171d8f48235b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-02-05 19:03:18 +01:00
Andreas Hartmetz
ea2c9f764f Escape path names in qmake-generated Makefiles.
qmake-generated Makefiles since 4.6 (according to bug report) contain
recursive qmake invocations with absolute paths to .pro files, where the
absolute paths are not escaped.

Task-number: QTBUG-11776
Change-Id: I49772c7d9147efea3bb7b9623c61d92aa0bb6857
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-01-31 11:47:11 +01:00
Jason McDonald
5635823e17 Remove "All rights reserved" line from license headers.
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.

Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-30 03:54:59 +01:00
Oswald Buddenhagen
365b5f7a92 "cache" is used only locally, so move it into scope
Change-Id: I0ba45d5620a8e5a79fdc6a1854245a0bfcc489f0
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-01-27 10:54:48 +01:00
Jason McDonald
629d6eda5c Update contact information in license headers.
Replace Nokia contact email address with Qt Project website.

Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-23 04:04:33 +01:00