with 40e87491 merged, 'QMAKE_CXXFLAGS' variable in
'win32-g++' toolchain became defined via 'QMAKE_CFLAGS'.
the similar can be found in 'win32-clang-msvc' and
'win32-icc' toolchains too.
this works for now, because such definitions just duplicates code
from includes, like 'gcc-base.conf', 'msvc-desktop.conf', etc.
but it would became broken, if changes would be applied to
'QMAKE_CXXFLAGS' definitions in that includes, prior
to the redefinitions in 'win32-*/qmake.conf' toolchains.
thus 'QMAKE_CXXFLAGS' definitions in 'win32-*/qmake.conf' toolchains
should not depend on 'QMAKE_CFLAGS' and be done explicitly.
in order to apply this change correctly to 'win32-icc' toolchain,
its 'QMAKE_CFLAGS' variable should become dependent on definitions
in the includes, similar to 'win32-clang-msvc' and
'win32-msvc' toolchains.
Change-Id: I5e820e44a769a590ba63f70dcb3a115311093311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
contains() interprets the regexp as being implicitly
anchored, so the leading part of the path needs to be
explicitly matched.
Change-Id: I1efa07dc99bb2db1717d2a66621899e23c144164
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
$$RCC_DIR can be absolute, so simple concatenation with $$OUT_PWD is
bound to fail.
Change-Id: Ibd80c49656c0e03b8a86ebca851af106cced08fb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in non-prefix configs, one has to differentiate between the module's own
build dir and qtbase's build dir, because the forwarding headers are
placed in -outdir under include/, while the actual headers end up in the
real build dir under src/.
Change-Id: I1d8ac904556b354bd113995316ba11dd6560a70d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Right now we are using the C++ compiler here, which relies on
the compilers automatically switching mode. This behavior is also
deprecated in newer clang versions and block clang developer
builds.
Task-number: QTBUG-64822
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I4d3c00ac528a45934c85777f42d243d0fe367c92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This commit introduces minimal support for instrumentation within Qt.
Currently, only LTTNG/Linux and ETW/Windows are supported.
Change-Id: I59b48cf83acf5532a998bb493e6379e9177e14c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'win32-icc' toolchain:
- remove duplicated angle/vulkan includes.
'win32-g++' toolchain:
- place angle/vulkan includes before the unrelated compiler-related
variable re-definitions, similarly to the 'win32-clang-msvc',
'win32-icc', and 'win32-msvc' mkspecs.
Change-Id: Ie04bc9fb1d51ec0366b42713439f680e51214bbc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The PRODUCT_BUNDLE_IDENTIFIER property was not defined in the Xcode
project file and therefore the build would fail.
This fixes a regression introduced by 0749ba2c5e.
Task-number: QTBUG-65673
Change-Id: I8089b36d86588223ec34859af7388c99a3574d8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Build systems such as Meson heavily rely on pkg-config to get build
flags.
-DQT_{module}_LIB isn't exported in .pc files which makes Meson unable
to build some codes out of the box.
Change-Id: I806998f19f815e05a47b60129977e52587b38d47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CFLAGS_AESNI' and 'QMAKE_CFLAGS_SHANI' definitions,
which are already set in 'gcc-base.conf' toolchain; this is
a continuation of 77347a36 relating variables, introduced in 5.10,
- remove 'gcc-base.conf' duplicate inclusion, left after eef2d1af
was merged into 5.10.
Change-Id: I328def916ccfb93c3f6b8336eb8801defbac37ae
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
such a project structure violates the assumption that the referenced
resources are specified relative to the sub-project root, so we must
resolve them to absolute paths manually.
Task-number: QTBUG-65753
Change-Id: I8bcd5c6e7d7c6a713e5fcd3668be7d2f23169501
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mingw-w64 toolchain:
- add missing compiler definitions, similar to
'msvc-desktop.conf' toolchain,
- describe the reasons of missing compiler definitions, available in
'msvc-desktop.conf' toolchain,
- add missing 'QMAKE_CXXFLAGS' and 'QMAKE_CXXFLAGS_WARN_ON' variables,
similar to 'msvc-desktop.conf' toolchain.
ICC on Windows toolchain:
- add 'QMAKE_CFLAGS_OPTIMIZE_FULL' variable, similar to 'gcc-base.conf'
toolchain, though left it unused for now,
- add missing flags to 'QMAKE_CFLAGS' variable, similar to
'msvc-desktop.conf' toolchain,
- update deprecated 'Qwd' flag with 'Qdiag-disable',
- use 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable instead of '-Od' flag,
similar to 'gcc-base.conf' toolchain (ICC implies '-O2' optimization
level by default, while MSVC implies '-Od'),
- add 'QMAKE_CFLAGS_UTF8_SOURCE' variable, similar to
'msvc-version.conf' toolchain; use a workaround to initialize it,
until '-utf-8' flag would be supported by ICC on Windows,
- update deprecated '-Qstd=c++1z' flag with '-Qstd=c++17',
MSVC toolchain:
- remove 'incremental' from MSVC 'CONFIG' variable, since it has
relevance only for the Unix generator,
- add 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable, used in ICC for Windows
toolchain,
- add empty 'QMAKE_LIBS' variable, similar to 'win32-g++' toolchain,
- add 'uuid.lib' library to 'QMAKE_LIBS_GUI' variable, similar to
'win32-g++' toolchain,
- add C++14 and C++17 language support flags, though left them disabled
for now, similar to 'win32-icc' toolchain.
Change-Id: Ideef62d0422674184836faa655bfc5d09a5f612f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
otherwise the project would need to clear QT despite using
qtHaveModule() in requires() (or REQUIRES=).
Task-number: QTBUG-65106
Change-Id: I568202214c8eafcdbe2d0e253b18f0e171293aff
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Old header.LGPL21 header was used at some files. Replase those with
new header.LGPL one
Remove old header.LGPL21
Task-number: QTBUG-57147
Change-Id: I650e39024ed4876bba27e954c7d61fdb025b46ef
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This ensures that the same set of variables can be successfully replaced
in both the Makefile and Xcode generators. It also switches the default
templates to use the Xcode-style ${var} syntax instead of the @var@
syntax for better Info.plist compatibility across generators.
Change-Id: Iff330bafd152773aafac9143c4a34e34f92f0ce6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since Xcode 6.3, this must be set to NO because stripping on copy is no
longer fully supported due to the potential of input binaries being code
signed. In this case Xcode will simply ignore the strip step and issue
a warning since stripping would invalidate the code signature. This
change silences that annoying warning for release builds. Also, the
setting assignment is moved from being hardcoded in the generator, to
a QMAKE_MAC_XCODE_SETTINGS value.
Change-Id: If25511edddc12b7b0407e2992d80884b7d6437dc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CXXFLAGS_THREAD' variable definition, since
'QMAKE_CFLAGS_THREAD' variable not set for mingw-w64 toolchain.
ICC on Windows toolchain:
- remove 'QMAKE_LFLAGS', 'QMAKE_LFLAGS_RELEASE',
'QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO' and 'QMAKE_LFLAGS_DEBUG'
definitions, since they're properly set in 'msvc-desktop.conf',
- remove 'DSP_EXTENSION' variable, which doesn't occur anywhere else
within QtBase; its most recent search results relate to
Visual Studio 6.0 and Intel Fortran.
Change-Id: I2ce5c2c9e9ca2c09c1acfcf8c60381d318e8e380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This works around the inability to build iOS apps for a "generic"
simulator by explicitly setting the Xcode build setting
ENABLE_ONLY_ACTIVE_RESOURCES to NO in order to ensure that all variants
of assets in an asset catalog are built when targeting iOS simulator
devices. Otherwise, we will simply build for whatever the first
simulator in the list happens to be. If the application is then deployed
to a different simulator, some of the assets needed for that device
variant may be missing.
This "helps" QTCREATORBUG-19447 but is not a workaround since this fix
is necessary for command line builds anyways, even though it's unlikely
to crop up in practice there, since one would have to manually deploy
the built application bundle to the simulator using simctl rather than
going through Xcode (which would rebuild for the appropriate device).
Change-Id: Ia41c48dcc715fe79a2c50db66a0ca7a1fea159c2
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... instead of only toolchain.prf.
the license check could go haywire, and everything else that file does
is meaningless in configure context anyway.
Task-number: QTBUG-63452
Change-Id: I5e31c87fe717fda40978c0317556070637e537e2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
especially during debugging, it is often necessary to re-run only one
(or a few) tests, where -recheck-all would be wasteful.
Task-number: QTBUG-64059
Change-Id: I9410894dec4289ff832d7f75e04f9b60fe76c57c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>