There was a race condition between QObject::disconnect() and
QMetaObject::activate() which can occur if there are multiple
BlockingQueued connections to one signal from different threads and
they connect/disconnect their connections often.
What can happen in this case is:
T1 is in activate() method and T2 is in disconnect() method
T1 T2
locks sender mutex
selects next connection
unlocks sender mutex
locks sender mutex
sets isSlotObject to false
creates QMetaCallEvent derefs connection
posts event
Two things can happen here:
1. Connection can still be valid, but it will have isSlotObject==false
and callFunction will be used instead of slotObj
2. Connection can already be invalid
To fix it mutex unlock should be moved after QMetaCallEvent creation.
Also there is another case, when we don't disconnect but delete the
receiver object. In this case it can already be invalid during
postEvent, so we need to move mutex unlock after postEvent.
Change-Id: I8103798324140ee11de5b4e10906562ba878ff8b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Storing them in a single byte is the first step towards the Short
QDateTime Optimization.
The bump in the "private version" by 10 is to accommodate possible
changes in the Qt 5.7 branch.
Change-Id: Id5480807d25e49e78b79ffff144a59420457bcf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the compiler supports C++11 alignof, let's use it. No point in
perpetuating the use of __alignof__ or __alignof.
There's a fallback implementation in qglobal.h that works even without
compiler extensions. We can't drop it just yet (alignas is not a
required C++11 feature), but at this point I doubt that fallback is used
anywhere anymore.
The tst_compiler test was wrong to use alignof(variable). That's not
permitted by the standard nor would it work with our fallback
implementation. MSVC 2015 enforces this, but ICC, GCC and Clang don't.
Change-Id: Ifea6e497f11a461db432ffff1448abfa86672c63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, a tab's text is used as its accessibleName.
When a tab's text is empty, there is no API to set
the tab's accessibleName. The two APIs are added to
set and return the accessibleName property of a tab.
Task-number: QTBUG-46530
Change-Id: Idf88b5f905fe66c6365ea0eeb650e74211db90e1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Some strings were drawn with a different size or scaling than what the
string itself said, causing confusion.
Change-Id: I4b187cba6d467cfa0900576bdf451052baa806e6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The protocol was originally developed by Canonical, currently supported
by Unity and Plasma.
Adjust some tests to use the non-native menu bar when they require it.
[ChangeLog][XCB / X11] QMenuBar uses the unified D-Bus AppMenu menubar
when the desktop environment supports it.
Change-Id: Iea74b40522573bcc4f70168fe7fa2a49b4f3fc21
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Also, bump the TypeInformationVersion field in qtHookData, to notify
the Qt Creator developers that the offset of QFilePrivate::fileName
was changed and dumpers should be adapted.
Change-Id: I71bc5f509b733c0ab3430cd47ff08961f0388839
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
By default, the read chunk size is QIODEVICE_BUFFERSIZE and the write
chunk size is 0 (which means that we don't use the internal write buffer).
Derived classes may override these values to define the size of
QIODevice's write buffer or to optimize the read buffer use.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: Ib732bc94be8da8a5514a6e5dcc04445895f130d8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some sequential devices allow data to be partitioned into several
channels that have the property of independently sequenced delivery.
Supporting such devices uniformly requires a unified API which provides
the user with a uniform concept of multistreaming.
This patch is based on QProcess's multiplexing model and introduces
the following features:
- ability to get the number of channels;
- multiple internal read/write buffers;
- channel selection functions;
- notification signals on channel activity.
To keep the source code compatible with single-channel implementations,
introduce a private class that references the current read buffer and
hides multistreaming internals from the user.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added multistreaming to QIODevice.
Change-Id: Idcaa6a618927c101c4c7284d2a633913be6a6ee2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Introduce a transaction mechanism that gives the ability to read the
data atomically. Current implementation supports transactions for both
types of devices. For sequential devices, it records the whole input
stream during transaction. For random-access devices, device position
is saved when transaction starts. If an error occurs, the application
may be able to recover the input stream by rolling back to the start
point.
Also, QIODevice::peek() was rewritten to make use of transactions
internally. The replacement of QIODevicePrivateLinearBuffer by
QRingBuffer is closely entangled with that, which makes it unfeasible
to do separately.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added QIODevice's startTransaction(),
commitTransaction(), rollbackTransaction(), isTransactionStarted()
functions to support the read transactions.
Task-number: QTBUG-44418
Change-Id: I3564b343ebeeaaf7c48a1dcdb7ef0a7ffec550f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This test seems to be quite broken on OS X: qWaitForWindowExposed returns
too early (while no window is on screen) so gestures can not be dispatched
QApplication::topLevelAt(pt) - returns null.
Use qWait + isExposed combo instead (similar to qWaitForWindowExposed, but
there is no isExposed test before the loop).
Change-Id: I85fbd773ccce0ca92b2dceb1749d67ef767aa0cf
Task-number: QTBUG-49849
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Commit ed0c0070 introduced qt_subtract_from_timeout but used it
incorrectly in several places.
Change-Id: I80ea16088707929a45d5a61ec6f3370f8e63d1cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Iae76d852a1657bfb6d88e84515f30bd2f1dece6b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Mark include directives in qevent.h for removal and preemptively
add missing headers in code base.
Change-Id: I81011d7bfad4a09d80deeda6d1bed67b5c0e63c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This test caused problems because it relies on the at-spi services to
run. In addition it could trigger orca (screen reader) to be launched
as a side-effect of the dbus call to the screen-reader-enabled setting.
Instead just export QT_LINUX_ACCESSIBILITY_ALWAYS_ON to make sure that
accessibility will work. This means we won't test the dbus startup any
more, but the test will be reliable.
There is still a dbus call to org.a11y.Bus to launch the service in case
it's not running yet.
Task-number: QTBUG-27732
Task-number: QTBUG-44434
Change-Id: Idb86ed98ca4b47cb209027c8b41529e7e5285197
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt Creator needs to be able to determine structure sizes and data
member offsets for certain private types even in the absence of debug
information.
It is sufficient to keep and test the actual data sets on the Qt Creator
side, as long library provides a hint which data set is needed.
So far, HookDataVersion was meant to be used for that purpose. To
make it more explicit, this patch introduce a TypeInformationVersion
field in qtHookData.
Change-Id: Ia1c3c6f62f314d63c4df289ef456f047c5e84cf4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former didn't account for ascent and descent.
Change-Id: If741f22f7e79ac3c13e58f2966358010d9f9ec81
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When the server could not be reached, the test previously,
produced:
FAIL! : tst_NetworkSelfTest::smbServer() 'smbclient.waitForFinished(5000)' returned FALSE. ()
- Loc: [tst_networkselftest.cpp(992)]
QWARN : tst_NetworkSelfTest::smbServer() QProcess: Destroyed while process ("smbclient") is still running.
Fix this by:
- Using QStandardPaths::findExecutable to locate the binary instead
of test-wise starting it.
- Add a function to ensure process termination.
- Pass a timeout argument to smbclient and pass an interval
depending on it to waitForFinished(), which should prevent
having to kill the process in most cases.
- Add proper error message
Change-Id: I1cbc76ca69aec7d1e0e880685bed54b0ba7f21c7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
baselineexample.pro is missing CONFIG += testcase, so,
make check succeeds without doing anything. The test seems
to connect to some network server to retrieve baseline images,
but that infrastructure apparently no longer exists.
Change-Id: I98f4fe5ef8a508fda90e408df2781a944eb99a60
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I1a963bdc24f7657731dc0374a8e2c3cbaa49f126
Task-number: QTBUG-22775
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
NSAccessibility has no explicit analog for
QAccessibleActionInterface::toggleAction(), checking checkboxes/radio
buttons is handled by NSAccessibilityPressAction. So ensure exposing
the action properly on OS X so that VoiceOver users can check/uncheck
checkboxes, select radio buttons etc.
Change-Id: Idc8b048de2313a3e875a929516baf3dded9c68cc
Task-number: QTBUG-44852
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
In order to support testing values of more accessibility attributes
and parameterized attributed, we provided some "infrastructure" to be
able to query them with minimal effort. We also reworked current 6
supported attributes to use this new way.
Change-Id: Id0ceb59aa0fe063c9aedad27cffcc3aef0899d7f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
textEditTest in qaccessibility test was using QTextEdit::setCurrentFont
on second pass, but that did not change the font used for text in any way.
I don't know what was the purpose. So I changed it into something that
made sense to me and actually tests text with a different font on second pass.
Also fixed characterRect function in tests to use correct font/format.
Change-Id: I843c5b29f8048196ec3405b6717655e77b567dbb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
On a high resolution display the test will potentially create a text
edit that introduces line breaks and these make it fail then.
Change-Id: I38807a9b3b511478a1742c4422a97c1cb3395a02
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
The same qt_timeout_value function was copied 5 times in qtbase's code,
so provide a common implementation in QIoDevice that can be used by
everyone.
This commit also corrects the remaining time calculation in
QProcess::waitForBytesWritten and QProcess::waitForFinished by using
this new function.
For QProcess::waitForFinished, if the process started within almost exactly
the timeout time passed to waitForFinished, msecs - stopWatch.elapsed() would
be -1, which is a special value.
Change-Id: I7b76ee6bae695eafdd02e3db03e2ff1e23a7f40c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This test accidentally causes the screen reader (in newer Gnome
environments) to be launched. This messes up the CI machines enough that
nothing works afterwards. Disable the whole test until I write the
proper fix. We don't lose anything because it was marked as
insignificant anyway.
Task-number: QTBUG-44434
Change-Id: I410e80580977178ea99a370c6c0909d1fb49a71c
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
QTextFormat::font{Weight,PointSize}() etc. return the font trait explicitly
set on the QTextFormat, while QTextFormat::font() returns font which also
uses the QTextDocument::defaultFont() as a default for any font traits not
explicitly set on the QTextFormat. Accessibility support for text attributes
used the former, which was wrong; this commit fixes it to use the latter.
Also includes tests to verify the fix.
Change-Id: Iab7f2be1b68adaad847d1f29c9e5af2195416035
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
In Qt4, if the result of the translation
QApplication::translate("QT_LAYOUT_DIRECTION")
returned "RTL", Qt usually called
QApplication::setLayoutDirection(Qt::RightToLeft)
in order for a translation file to specify if the UI should be
left-to-right or right-to-left.
However, due to modularization, we could no longer call
QApplication::translate(), so the code was wrongly changed to call
QCoreApplication::translate(....) instead.
This was wrong, and in addition the translation files was never updated
with the new context.
This patch fixes it to only translate it with the QGuiApplication context.
This is the only sensible context, since QApplication would lack QtQuick
support, and QCoreApplication would not know how to change layout
direction.
[ChangeLog][QtGui][i18n] Fixed bug where layout direction did not switch
according to the instruction in the translation file.
Task-number: QTBUG-43447
Change-Id: Id0409a42d41b3b9ff1cd53d090c4d9c9802f5659
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We would return true when opening assets in read/write mode despite
the fact that the files are not writable. The logic now matches
that of the qrc file engine.
This also adds a unit test for Android-specific issues.
[ChangeLog][Android][Important Behavior Changes] Opening assets with
QIODevice::ReadWrite now returns false to correctly indicate that the
files are not writable.
Change-Id: I019cc27861fc9b000dc13c5e0a38c0fc09a08671
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The selection update is not implemented on other platforms (if needed at
all).
Task-number: QTBUG-39440
Change-Id: I8eb8c4eb1c23ba2d246bc95f1c77dc9da9e22495
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Most of the QIODevice functions already have a locally cached
"sequential" flag. Make the rest of them follow this strategy.
This eliminates the need to use private caching members.
Change-Id: I0edb2c9b7c5f411c5bee25c425e7b40e3c9021d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
We tested button's AXDescription, which is however used only for
non-textual buttons (e.g. buttons with an icon and without a visible
text). On the other hand, button's visible text (which is our case) is
exposed in AXTitle (and not in AXDescription).
Change-Id: Ie89c758cf94b72ade3a440561c5f3df61a4c4612
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This requires building a command line tool and running it using
QProcess, which is not a supported deployment option on Android.
Change-Id: I795374bf809a8e4d8634a55f5ebf1699ee9745d1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
Calling QOpenGL2GradientCache::getBuffer() will generate the texture the
first time, calling glBindTexture in the process. We did this without
first ensuring that the right texture unit was active, resulting in the
generated gradient texture binding onto the glyph cache mask unit.
We now provide a specialization of bindTexture for a QGradient, which
ensures that the right unit is active before calling getBuffer().
Unfortunately we have no way of knowing if the result of getBuffer()
was a texture that was already bound, or if we need to bind the result,
which means we have to do an unconditional bindTexture of the resulting
texture ID. This means double-bind for the initial texture generation,
but this was already an issue in the original code.
Task-number: QTBUG-43039
Task-number: QTBUG-41244
Change-Id: I20c9b795c8c14f8d58be2b60a284c5a060705ec0
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
OS X now has a setting (General->Show scroll bars) to use only transient scroll bars.
Task-number: QTBUG-41340
Change-Id: Iffe30e9d601c169d955a380002743bab518f41ea
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case.
Change-Id: Ib574ecfdb8e9d91985d6df8c092896581d1d06ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This upstreams parts of Qt Creator's tst_offset test to serve as
an early warning system by testing private implementation details
that are used in Qt Creator's data structure "pretty printing"
facility.
While the tested implementation details can be changed without
breaking binary or source compatibility, downstream tools like
Qt Creator depend on them.
If this test breaks, you are kindly asked to coordinate with the
downstream stakeholders to avoid tool breakage.
Change-Id: I1286efcec9bef105f80c2163a4f66f5c43f3a218
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Q_COMPILER_DEFAULT_MEMBERS and Q_COMPILER_DELETE_MEMBERS are now set
starting from gcc 4.6. Pre-4.6 compilers implement a non-final snapshot
of N2346, hence default and delete functions are supported only if they
are public. Starting from 4.6, GCC handles final version - the access
modifier is not relevant. Compiler error:
qsharedpointer_impl.h:717:31: error:
'QEnableSharedFromThis<T>::QEnableSharedFromThis()' declared with non-public access cannot be defaulted in the class body
Change-Id: If1d3d4696f91912a09ca72bd4aa1fb07f491a0cb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Each test function is responsible for removing the children it added to
m_window, since m_window is reused for each testcase.
Due to this, the test
QCOMPARE(children.length(), 2);
failed, (it was 3).
Change-Id: Idbd13214d2e841450800df0542fbdbcfaac85ce1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
These functions are supposed to make it easy for third parties (and
QLineEdit) to implement the textAt/Before/AfterOffset functions.
Before the functions were ignoring newlines completely and thus only somewhat
useful.
Change-Id: I7136b9502a7fa6f8ad9ad7236761a34c1a7fd4da
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
On both iOS and Android it is very confusing to be able to move the focus to both, the line edit and the outer frame that is the spin box.
For Linux this fixes an issue that orca would not read the value correctly after pressing the up/down buttons.
Task-number: QTBUG-39861
Task-number: QTBUG-39442
Change-Id: I73c50c91e9021324c52d168d537afd0ea719a48f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
In addition change to the one in all file instead of individual
interfaces. Future updates only have to copy the new version of
ia2_api_all.idl and run nmake.
Change-Id: Ie7a1e65c8dd0c73809ac97aae2d586f425337f18
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Make the functions work consistently. For example asking for the line at
the cursor position when the cursor was at the end returned an empty
line before.
Task-number: QTBUG-38500
Change-Id: I60fc78c7be129a59c83efcfce6d8fdd16f2c3f65
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This library was created as a work around for limitations on Windows
Phone 8.0, which will not be supported going forward (Qt 5.4). Therefore,
we no longer need (or want to maintain) this experimental feature and
should remove it from the repository.
Change-Id: Ia417833f9de43e2d3e0940df93625e7d87a555ea
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On Linux for example Orca gets confused when showing a dialog that is a
child of another widget since it would show up twice in the hierarchy.
Task-number: QTBUG-39444
Change-Id: I84773ecc3d6774a652dbeb29ad201779f5b3191c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is used by Orca for geometric navigation (aka flat review) to move
the focus around. It is also generally sensible to be able to
programatically move the focus around. This way of moving the focus
is redundant with the action interface's focus action.
Task-number: QTBUG-40048
Change-Id: I1b61ea843f6bfc3dc00007772e0e5102555ca752
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
