There may be a race where e.g. thread 'B' is woken up by a queued invoke.
At the same time thread 'A' asks 'B' to quit, which will set various
atomics (some important ones are 'interrupt' in the dispatcher and
'exit' in the event loop), but it does _not_ try to send another wake
since there is already an unhandled wake triggered by 'B' itself.
Sadly 'B' reads the 'exit' atomic before 'A' updates it.
Then, slightly before, 'B' sets 'interrupt' back to 0, 'A' write 1 to
it, meaning 'A's interrupt is ignored. Then, since there is no
interrupt, 'B' goes back to waiting for events, leaving the thread alive
and running instead of quitting.
Maybe this has unforeseen consequences (one consequence is that it will
return and re-enter the event dispatcher once more, possible
unnecessarily)
Fixes: QTBUG-91539
Pick-to: 6.1 6.0 5.15
Change-Id: Ie6f861f42ffddf4817d5c8af2d764abe9d9103c2
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a race condition in the test, since the window
might be exposed before the event to activate the
application has been received. And the short cut is not
triggered before the application is active, which
means it could just be discarded and the window would
never be closed.
This happened consistently when testing on Wayland.
Task-number: QTBUG-91418
Change-Id: I40cb143985175f5f2b5405e9502a48475c93074a
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The test assumed that dialog.move() would actually move
the dialog box to the requested location, which is an invalid
assumption on Wayland.
Since the objective of the test is not to check if move() works
this way, but to check whether the dialog box shows up in the
same location when it is re-shown, we actually fetch the pos
after showing it the first time, rather than assume this is the
same as the requested one.
Task-number: QTBUG-91418
Change-Id: Ifa21fa08429f198988f90d7ee328e4f35a4764c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This test depends on XCB, but is only protected by a build-time
flag, so it will be executed as long as XCB is available at
build-time. Do as with the offscreen backend and just skip it
when a different platform plugin is in use.
Task-number: QTBUG-91418
Change-Id: Ida076dc81d0740af2cec164bd40ca10d16345f05
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
If we only wait until the window is shown before testing the
event delivery, we may be getting a WindowActivation event
and subsequent paint event after we start testing. This can
cause a shift in the paint events, so that we end up with an
unexpected paint event at the end.
We should wait until the window is active before we start
checking the response to updates, to be sure nothing is pending
on the queue still.
Note that you'd expect QTest::qWaitForWindowActive() to do this,
but this actually falls back to qWaitForWindowExposed() when
the platform does not have WindowActivation capability. While
there is no real link between WindowActivation capability and
waiting for a window to be active, changing the behavior of that
function would be too scary, so we just implement an explicit
wait in the functions that depend on this.
Task-number: QTBUG-91418
Change-Id: Iee40dcfa1377f543ea05042cc5a972270b346708
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Since Qt 5.5, brush textures are stored as QImages. If the texture has
been set as a QPixmap, the conversion to QImage may change its pixel
format, depending on the native system format. That is acceptable.
Fixes: QTBUG-69193
Task-number: QTBUG-91418
Change-Id: Ic4dbeaa552b1f2183774a011e38414855a9dc4b1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Otherewise, we hit an assertion because the name is empty.
Fixes: QTBUG-91709
Pick-to: 6.0 6.1
Change-Id: I03a530d64ea8dead3efc5fcb8c00909388a387d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise the benchmark crashes as the data tag for the row would be
empty.
Fixes: QTBUG-91708
Pick-to: 6.0 6.1
Change-Id: I484ded5b8670571b80012e64d67846d3b8db5320
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the source models don't have the same number of columns, the proxy
keeps only the smallest number of columns across all source models.
Afterwards, if a source model emits dataChanged in a column past
that number (a "hidden" column), the proxy needs to ignore it rather than
assert.
But also, if the source model emits a dataChanged signal across both
visible and hidden columns, then the last column number needs to be
adjusted so that the signal is correctly processed and forwarded.
Task-number: QTBUG-91253
Pick-to: 6.1 6.0 5.15
Change-Id: I939e8ec0faf41370472f86785851292e4372f72c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Following patterns from the other backends is insufficient with OpenGL
because we do not use real uniform buffers. There is currently a
possibility that a shader program will be bound without following it
with setting uniforms. Correct this by having a second level of tracking
of the associated srb object in the pipelines.
Pick-to: 6.0 6.1
Fixes: QTBUG-91630
Change-Id: I74a012daade826dd22c436bde06381c1233bad11
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Wayland does not support WindowActivation capability, which
will trigger a warning in qWaitForWindowActive(). Since the
selftests depend on matching the exact output of the tests,
it gets confused by this, even though the tests are passing.
So we suppress the warning when the capability is not
supported.
Change-Id: I1e1f530a7b237183ee4ef123618e868b746ba863
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QTreeView's drawTree implementation performs lazy layouting
when calling itemDecorationAt. If animations are enabled,
this can change the list of items, and invalidate the copy
made earlier.
Don't copy the list of items, use a reference instead so that
code iterating over the items later operates on valid data.
Add an assert in the private itemHeight method, it must not
be called with an index that is out of bounds.
Fixes: QTBUG-42469
Pick-to: 6.0 6.1 5.15
Change-Id: Ifdb782881447912e00baffd1c407de10a1d8d0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This function returns the size in device independent
pixels, and should be used when calculating user
interface sizes.
Change-Id: I528123f962595a3da42438ca560289a29aca4917
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Renamed the private part of the namespace to QTlsPrivate.
Fixes: QTBUG-91531
Change-Id: Id2d9c458d8d958b35e437eee42889177dad0a7a7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit e4efa00c72c7011f4e5c27722c2a522b30274610)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The prior tst_QDateTime::setMSecsSinceEpoch(-1) testcase was the last
millisecond of 1969; which (deep in the relevant function) actually
uses time_t 0 (with the -1 ms offset taken aside to be put back
later); so add the matching -1 second test. At the same time, add +1ms
and +1s checks for symmetry.
Change-Id: Ib487305f6ad81b55563ea59926cae13fb1fde592
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is to avoid false positives.
By default files are large if uncompressed size > 10 MB. Only configurable internally.
Also add auto tests.
Task-number: QTBUG-91392
Pick-to: 6.0 6.1
Change-Id: I32258cb7c957f2a23a05157ba4ed5c0af2ba585e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Based on the discussion in https://codereview.qt-project.org/c/qt/qtbase/+/336742
changing our types from RELOCATABLE to PRIMITVE is fine.
Change-Id: Ica867203aa813d19fdfd3753fc4ff36ef4332fc3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's a bit weird to calculate timeout in milliseconds and then pass
it as number of seconds ...
Pick-to: 6.1 5.15
Change-Id: I1127163ea06e49ac1b53eea6f60ee8590319bfa1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test causes frequent failures in the CI. This is the most
subtle fix until it is properly fixed.
Pick-to: 6.1
Task-number: QTBUG-91423
Change-Id: I6499378dcd3ed1c31275db38d83b572e764366cc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
QTBUG_89082_actionTipsHide() is very flaky if tooltips fade in, as the
mouse move might happen while the tooltip is still appearing.
Fixes: QTBUG-91532
Pick-to: 6.1 6.0 5.15
Change-Id: I55305927fcf143d99dfff28d0bc70b2e831a139a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A way to read the description of the profile from ICC, or set one
yourself.
Change-Id: I68622e30ee209cac99c41f3df934712c3548c0de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Use the QWindow-based overloads of QTest::mouseMove(), which do
not move the cursor position.
Amends ba13960392,
3f3d5e6716.
Task-number: QTBUG-89082
Pick-to: 6.0 6.1 5.15
Change-Id: I2cc62e4d1f24e4baebafd0d76fbf0fbdb6f588c7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test has been observed to fail with:
FAIL! : tst_QDoubleSpinBox::setReadOnly() 'QTest::qWaitForWindowActive(&spin)' returned FALSE. ()
/Users/qt/work/qt/qtbase/tests/auto/widgets/widgets/qdoublespinbox/tst_qdoublespinbox.cpp(863) : failure location
Remove the widget member and use a widget instantiated on the stack instead.
Add a check for top level widget leaks in cleanup() and fix leaking task224497_fltMax()
by instantiating the widget on the stack.
Pick-to: 6.1
Change-Id: Idbbb5d859c0df2d9b9f49fb9f69ef6bb7d1ee150
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Avoid painting errors with dpr < 1, also for the PassThrough
mode.
This limits the minimum high-dpi scale factor to 1,
for the code path which determines the scale factor
based on screen DPI.
Pick-to: 6.1
Task-number: QTBUG-89948
Change-Id: I14b3f130f0ae141d5f05c87437f926a9f76d1dec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move the cursor out of the way to prevent it from interfering.
Amends 3f3d5e6716.
Task-number: QTBUG-89082
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I0efbe2b5618a04e92839083a1bd3383e05d6ff93
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Before this change, the QMetaType for T const* where T is derived from
QObject would not store the static QMetaObject of T. This commit changes
this. As a consequence, the metatype system can now convert between
const and non-const pointers to QObject. Note that this allows casting
const away; but so does C++ with const_cast.
In addition, a new flag, QMetaType::IsImmutable is introduced, and used
to tag the metatypes of pointer to const types. This allows code to
discern between pointers to mutable and const QObjects, which is
relevant for the QML engine.
Task-number: QTBUG-82354
Change-Id: I3e4e4f39f565bd99a65e161528ce5304df73d6d6
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When attaching a continuation with the default (QtFuture::Launch::Sync)
policy, it will be launched in the same thread where the parent has
been executing, or in the thread where the parent lives, if the
continuation is attached after the parent has already finished. Fixed
the test-case to make sure the continuations are attached while the
parent is still running, so that they can be resolved in the parent's
context.
Fixes: QTBUG-91373
Pick-to: 6.1
Change-Id: I82b3b0c47b76d121b44bd512659c08b3b474e351
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Only RGB444 and RGB666 were treated slighlty different from the rest,
but the test had a few additional mistakes.
Pick-to: 6.1 6.0 5.15
Change-Id: I4728b4036affedfffce8bca5c1e7be3869344fbe
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
In QTimeZonePrivate::dataForLocalTime(), mistrust the Android
backend's hasDaylightTime(), as it has a comment saying it only knows
about future transitions, not past. This caller of it really needs to
query "has ever had a transition", which this doesn't answer. Many
zones that have no plans for future transitions have had transitions
in the past; these were failing the transitionEachZone() test.
In the process, refine the test itself, making sure we catch some
quirk cases that shouldn't arise and making the debug message on
failure more informative (while eliding the zone name, as this is part
of the test name anyway, so added to the output by qDebug() itself).
Fixes: QTBUG-69131
Change-Id: I88a0528182c247acb8b6327b40516178e455bcc0
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Extend and rename the pixmap() crash test to also verify
that a non-null pixmap is returned.
Change-Id: Ia972c4f705724cfa1394521a2dfd87451d9c5d64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This patch marks some functions "override" to silence the corresponding
warning.
Change-Id: I88ccc5fa7521ecccc84a6cba9f06ea185cc5679e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We haven't used the spawn functionality on QNX since Qt 5.7 (commit
005a8bfbf0) because that's when we dropped
support for QNX 6.5.0.
Change-Id: Ic90d8429a0eb4837971dfffd1664f9712bdce2d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
And set *pid to -1.
[ChangeLog][QtCore][QProcess] If a startDetached() fails to start the
target application, the QProcess object should now have a proper error
string in errorString().
Pick-to: 6.1
Change-Id: Ic90d8429a0eb4837971dfffd1664e825ffcb923e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The idea is to have QSslKey(Private) backend-neutral and hide
all library-specific code inside plugins.
Fixes: QTBUG-90953
Task-number: QTBUG-65922
Change-Id: I2eeee3b2b72c78c2e24f2fb914abce3caa913be8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit 0352cf8e1bf57615b9faf3f6f383896444e762ac)
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That qWarning cannot be in the child process (we don't know if a user
logger is fork-no-exec-safe) and the failure to chdir() should be
reported as a failure in QProcess::startDetached() instead.
Change-Id: Ic90d8429a0eb4837971dfffd1664e7577c81610b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: David Llewellyn-Jones <david.llewellyn-jones@jolla.com>
I get a warning about the variable t_var being set but not used.
This patch fixes the warning.
Change-Id: Ib2df5ed2dddd283eb87f71a8b85951d1f67f04f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QTimeZone tests have some helper functions to test details of a
QTZP instance; these use QCOMPARE(), so may return early on failure.
The callers then need to notice the failure and, in their turn, also
return.
Change-Id: I0a188e9641ced70c9ffedd95e91f39681fad768a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Its back-end lacks transition data, so the test can't possibly
succeed. Make the skip conditional on the tested zone having
transitions, so that the test will come back into play if we ever gain
support for transitions on Android.
Fixes: QTBUG-69129
Change-Id: Ie4f96601b8b18cd496efbde7cf2557875cf3c1c9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Applications on macOS are automatically activated (put into the foreground),
when launched from the Finder, or via 'open' on the command line. But when
launched from the terminal, e.g. foo.app/Contents/MacOS/foo, the application
will launch in the background (inactive).
In Qt we override this behavior, activating the app even when launched from
the terminal, as a convenience, as long as the application is a GUI application.
Unfortunately this means that when tst_qapplication launches a subprocess that
is a GUI app, it will steal activation from tst_qapplication, which in turn
will break tests that later try to activate a window and check that the window
is then active. The window will not be active until the application is active.
We can work around it by preventing Qt from activating the application, but
ideally we'd find a better solution to this, as we don't want to sprinkle
overrides all over our tests.
Fixes: QTBUG-90699
Pick-to: 6.1 6.0 5.15
Change-Id: If53a86548002b739df0c0a7153d6244924a4a205
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A recent change ( a7ca8b1a28 )
led to failure of binding removal in setInterval().
This was fixed by introducing setterScope.
This patch add unit tests for this regression.
Change-Id: Ic8da1f2d82ad6c8ccd81c9b1eff72d42cf75f28a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Apparently we used to have (back in 2007, only on Windows,
incompatibly with what we were then using on Unix) a TextDate format
(only for QDateTime, QDate used what it still uses) that put the
day-of-month number, with a dot after it, before the month's short
name. We have retained parsing of this format, on all platforms, ever
since.
It no longer matches the format we now use (since 5.2, in 2013, commit
61b56a89a1, which harmonised the format
with Unix and QDate); now seems like a good time to stop complicating
our parser for its sake.
[ChangeLog][QtCore][QDateTime] The parsing of Qt::TextDate in
QDateTime::fromString() no longer supports the old TextDate format
used (only) on Windows by Qt < 5.2 ("ddd d. MMM yyyy" with an
"HH:mm:ss" time either appended or inserted before "yyyy").
Change-Id: I73a798ab78f187543e415119cc4a11f1cfd73820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since fromString() can't parse the (ambiguous at the best of times;
also backend-dependent and thus potentially system-locale-dependent)
abbreviations currently produced (since 5.9) and can parse UTC-based
offsets, the OffsetName of the zone is a more robust format for the
zone-suffix. This also makes it possible to consistently use the C
locale, compatibly with everything else about post-6.0 date-time
serialization.
[ChangeLog][QtCore][QDateTime] When spec is Qt::TimeZone, the
offset-suffix now used for the toString(Qt::TextDate) format is now a
UTC-based offset string, compatible with the parsing (now) supported
by fromString(). The zone-abbreviation suffix in use since 5.9 was not
parseable.
Change-Id: I4024ae87980c6d3590c68a67b8d1c8f433e36855
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are GMT-offset zones whose convention for the sign of the offset
is the reverse of what we are (still) using, which is the usual
convention for UTC-offset zone: for example, the Olson Database's
Etc/GMT+3 has offset -3 hours in the UTC-based system we use, so we
give it suffix GMT-0300. The UTC-based suffix is also what we use as
the abbreviation for OffsetFromUTC() in toString().
For now this only adds support for parsing a planned future form: the
old form using GMT is retained, to give client code some chance to
prepare for a backwards-compatible transition. Although the GMT prefix
is matched case-insensitively, only match UTC if fully upper-case;
there is no meaningful precedent for case-insensitive usage here.
[ChangeLog][QtCore][QDateTime] The Qt::TextDate format now recognizes
UTC-based offset suffixes in addition to suffixes based on the
deprecated alias GMT. This prepares for toString() to use such
UTC-based suffixes for time-zones (fromString() cannot parse the
present abbreviation suffix). A future release of Qt shall use
UTC-based suffixes in place of the present GMT-based suffixes (which
conflict with GMT-based IANA zone names) for Qt::LocalTime and
Qt::OffsetFromUTC time-specs. Client code is encouraged to use and
recognize UTC-based zone suffixes in preparation for that transition,
unless compatibility with versions before 6.2 is required.
Change-Id: I5a42a488f1232a30f4b427b7954759283423b9b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When changing transferfunction the look-up-tables needs to be
regenerated.
Pick-to: 6.1 6.0 5.15
Change-Id: I83ca5fe570f85d478a374f52c0a82db84e70c3b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's the QScopedPointer test, so we want to test deprecated APIs.
Change-Id: I029103b3150c576cba9b395aafc571b9fccc914a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few formats were not treating the input QColor correctly. Fixed and
added more exhaustive test.
Pick-to: 6.1 6.0 5.15
Change-Id: I872aeeb45e518f9a34b4ac35642264821f9927f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead of an XFAIL, actually test what we expect will happen for the
test, namely that the milliseconds will be lost. In the process,
verify that milliseconds since epoch also matches what was expected,
change an "expecting empty" condition to check for the "invalid"
test-case to which it's actually relevant and note that this test-case
shall need amended when we update our ISODate support to the 2019
update, which extends the year range.
Task-number: QTBUG-56552
Pick-to: 6.1 6.0 5.15
Change-Id: I680aa31ee0dcc8fadabb5d4cd6c083a8afd48573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test verified that a LocalTime's time since Epoch changes when the
system time-zone changes. This works when the QDateTime object is in
short form and recomputes its offset from UTC every time it is needed,
but fails with a pimpled QDateTime, as this caches its offset from UTC
when it is created, saving the recomputation which - in the far more
usual case where the system time-zone does not change in the lifetime
of a QDateTime object - would normally produce the same result.
Changed the test to use a newly-created QDateTime constructed with the
same parameters, which doesn't have the cached out-of-date knowledge
of its zone offset. Removed the XFAIL. Made the test data-driven and
added test-cases: one so close to the Epoch that it should be short
even on 32-bit systems, one so far that it's pimpled even on 64-bit
systems (used in reproducing the issue in order to debug it).
This then revealed that Android 5 doesn't seem to support the POSIX
zone IDs used by this test, so it now verifies that LocalTime has the
expected offset from UTC after zone changes, QSKIP()ping if not.
Documented that the behavior of LocalTime is undefined after a change
to the system time-zone. Cleaned up the existing doc of Qt::TimeSpec
in the process.
Fixes: QTBUG-89889
Pick-to: 6.1 6.0 5.15
Change-Id: I1058f47a1ff3ee1c326f3579ac80bd8bab242e28
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The initial implementation and the commit
c00ab6f8ea was wrong:
* env->findClass() in fact returns a global reference, and in any
case we shouldn't be calling that, instead QJniObject would be
enough.
* The size param provided to env->RegisterNatives was wrong.
* A test for registerNativeMethods() is added to ensure such break
is not repeated again.
Task-number: QTBUG-89633
Pick-to: 6.1
Change-Id: I4d3a6a9270755f465c40add25521fb750dd4de0a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The system locale of a macOS application is not affected by environment
variables like LANG. Yet, we were reporting a name determined from
environment variables as the fallbackUiLocale(), rather than one based
on the language and country of the actual system locale.
This lead, via the usual CLDR likely-subtag fallback, to claiming the
system locale's name, language, script and country were those obtained
from these environment variables, even when they were at odds with the
actual locale being used by the system, which was being used for some
queries.
Worse yet, any data not supplied by these queries was being obtained
from the same CLDR locale as the name, making for an inconsistent mix
of locale data.
While we cannot avoid the likely-subtag fallback step for fallback
data, it is more consistent to use the actual system locale's name
as start-point for that fallback.
At the same time, add support for the language, script and country
queries, so that the QLocale::system() describes itself faithfully,
instead of claiming to be the locale that results from that fallback.
If we want to support LANG or other environment variable overrides,
they should be handled by the layer above the system locale, by
changing the default locale of the Qt application, as if the user
had called QLocale::setDefault().
[ChangeLog][QtCore][QLocale] QLocale::system() on macOS no longer
pretends to support LANG or other environment variables as overrides,
as this is not a feature that the system locale on macOS supports.
To override the locale of an application, use QLocale::setDefault(),
or pass -AppleLocale en_US.
Fixes: QTBUG-90971
Change-Id: Ibdaf5ff9a2050f61233a88eabf3c29094f7757f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously the only test was that it produced no warnings,
if anyone paused to read the output to notice them.
Change-Id: I225ca99c7ec316186702c0fdb355585374c014a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Somehow QList::fill(t, newSize) introduced a regression in Qt6:
when newSize < QList::size() we should resize to the newSize.
This is aligned with QVector::fill() in 5.15 and std::vector::assign()
While 6.0 is already out, picking it to 6.0.x could save someone who
haven't migrated yet as well as fix some accidental bugs in Qt's code
[ChangeLog][QtCore][QList] Fixed QList::fill() regression introduced in
6.0: calling fill() with size < current list size wouldn't truncate the
list
Fixes: QTBUG-91042
Pick-to: 6.0 6.1
Change-Id: Ic166e2c5e42390b61df1030f7c705e344433f7f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
gcc 9 consumed enourmous amounts of memory building the test, regularly
dying on a VM with 4GB RAM. Splitting it up helps.
As a drive-by, use inline static variables, and rename the header used by
other tests to tst_qmetatype_common.h.
Change-Id: Ib716d8e3506aac6c87845e57b04cb1a4f6c68387
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The text of QPlainTextEdit might change when it is invisible, so an
adjustment of scroll bars is needed when the QPlainTextEdit showing
up, otherwise the range of scroll bars might be incorrect.
Fixes: QTBUG-77937
Pick-to: 5.15 6.0 6.1
Change-Id: I45c686c7e09ca7b2944c36122e9157de0ec4f0e0
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It fails on 10.15 and 11, preventing those from being significant,
and the test is already marked as expect-fail based on QTBUG-20984.
Task-number: QTBUG-20984
Change-Id: I6911166a1c3e9173d6d36f2a3a68b37778fd3406
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Calculate the effective width of the hyphen better, and compare with
ceiled sizes.
Pick-to: 6.1 6.0
Fixes: QTBUG-90698
Change-Id: I7ed2eb44c54240ecb2f8a38e5acf1f32608b2bfb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It turns out QTextStream on Android isn't as easily visible as it is
when going through qDebug (where it can easily be seen with
`adb logcat -v brief libqnetworkinformation_<arch>.so:* -s`)
Change-Id: I3b495d7a3d331fda6cfe602c461107dd1d0b3faf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit 677797929d8080199990d741773832f80a654265)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Since the old code is now fully integrated in QNetworkInformation backends
Change-Id: Ia843d17bb3c98333e8d68752e25722b5860f48e0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(cherry picked from commit 7860b9e6ffece207d054ac0c321bc3c5b983708f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Different font was used when running on QEMU ARMv7 and the second page
was never reached.
Pick-to: 6.1
Task-number: QTQAINFRA-4127
Change-Id: Ic85b76661cf3642b69e6e1b21e8062d7c36231e3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As described in 3279c8e7d7, we can't
depend on the widths of decoration to always be the same for
drawText() and equivalent drawStaticText/drawGlyphRun.
This is typically visible as an off-by-one when using the default
fonts on OpenSUSE.
Since this test was actually made to test positions of RTL glyphs,
we can just disable the decoration and simplify the text.
Fixes: QTBUG-89086
Change-Id: I139fe3e1c5e98d8b1d7e0e7c19645fd4717d1d95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously it only returned checked or unchecked for a tri-state
checkbox.
Fixes: QTBUG-84616
Pick-to: 5.15 6.0 6.1
Change-Id: Ife72098e35f8295fd389bda232de5478ffa7e87f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The benchmark used to crash because QMetaType::typeName would return an
empty string, which is not a legal value for newRow.
Change-Id: I9e6c6c1cf153943bfa21181cd2cca596a7943ea0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amend ac970d48fd and use
QEXPECT_FAILURE for systemTimeZone test on 32bit systems.
Task-number: QTBUG-89889
Change-Id: I0eed35df871c69a20bcd7c544fc0e9a48dd8db7b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Clang warning: 'isSequential' overrides a member function but is not
marked 'override' [-Winconsistent-missing-override]
Change-Id: I1a7c5516d2656469eab556e7f9d310192510b99b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This was added by 9ff76c27b9 on
the basis that it signifies a shaping error and would later assert
or crash.
But the line is easily reachable by user code. If Harfbuzz returns
0 glyphs, it just means it is unable to shape the string, for instance
if the input string only contains default ignorables (like a ZWJ)
and does not have any appropriate glyph to use for replacement.
Qt expects there to always be at least one glyph in the output
(num_glyphs == 0 is used to indicate shaping is not yet done), so
to avoid asserts later on, we simply populate the output with a
single 0 token, which is a required entry in the font that is
reserved for representing unrepresentable characters.
This also adds a test and therefore a zero-width joiner to the test
font to reproduce the issue.
[ChangeLog][QtGui][Text] Fixed a possible crash with certain fonts
when shaping strings consisting only of control characters.
Fixes: QTBUG-89155
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ia0dd6a04844c9be90dcab6c464bebe339a3dab11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
And remove the direct conversion so we can get both the SIMD
optimization and threading applied.
Change-Id: Id032ea91cc40c1cbf1c8a1da0386de35aa36cfb5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For Windows. Based on the code I wrote for QNetworkStatusMonitor.
It also renames the netlistmgr feature, avoiding the abbreviation.
Locally my MinGW fails the networklistmanager feature test so it may
not be supported on MinGW, likely leaving it without a backend at all.
Change-Id: I13bbe4127edc2a9c0bb91602c95f1cb206a85a69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also remove tests/tests.pro that would be empty without the benchmarks.
Change-Id: Iaf92a729d1286b3e0c03bf9f877b59e1d83708e6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Dating from the origins of our support for the zoneinfo file format,
the mapping of POSIX's day-numbering (0 = Sunday through 6 = Saturday,
see [*]) to Qt's (1 = Monday through 7 = Sunday) was done by mapping 0
to 1, when it should have been 7.
[*] http://www.gnu.org/software/libc/manual/html_node/TZ-Variable.html
Corrected a QTimeZone test that trusted the results it got without
checking which day of the week those were: they were all Mondays.
Verified that the corrected dates are in fact Sundays.
Checked the zone abbreviations, too.
Fixes: QTBUG-90553
Pick-to: 6.0 5.15
Change-Id: I84b4b14f9892ff687918cd3c42c7c9807e45313c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Introduction of QObjectCompatProperty requires every write to
the property to be examined whether it is OK or should be replaced
by a setValueBypassingBindings/markDirty combination. The existence
of operator= make this difficult as it is easy to miss places where
it is written. By not having operator=, we can help developers
make sure they had a conscious decision about each write to the
property.
Change-Id: Ia61ea4722eb0bab26ce7684b85dd03d710cd1751
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This reverts commit 8f8405e046.
Reason for revert: Appears not entirely thread-safe and caused QTBUG-90705
Change-Id: I390c0b1a555a18e6a095b52010371d017071e26b
Fixes: QTBUG-90705
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This is in line with QML where
import QtQuick 2.15
Rectangle {
width: 100
height: 100
color: "red"
Rectangle {
id: inner
x: 10
y: x
width: 50
height: 50
onYChanged: { console.log("hey"); inner.x = 10}
TapHandler {
onTapped: inner.x = 20
}
}
}
results in a binding loop warning when the tap handler triggers. While
the change handler would only run once, we cannot statically determine
if we need to loop once, twice, or if there actually is a diverging
loop. Thus we unconditionally warn about the binding loop and stop
executing the binding.
As a drive-by, verify in the related test that a change handler which
overwrites its properties binding itself removes the binding.
Change-Id: I5372019c2389ab724c49cd7489ecbd3ebced1c69
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QTlsBackend is a factory itself - it creates TLS/X509 objects. Having
an intermediary between Factory->Backend->TLS primitive does not look
very natural thus let's squash the first two parts. Backend is a factory
creating TLS primitives, but its static functions also provide information
about backends availablei and give access to those backends.
Fixes: QTBUG-90606
Task-number: QTBUG-65922
Change-Id: I8409d81fd11fb46e6ab4465b4937a7680a8c2447
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Read/write/notify properties, 3 out of 5 defined in this class.
Task-number: QTBUG-85520
Change-Id: Ic6c74f90a2fa3c71d71cf9a5d557f1b6fc489d35
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
As part of Qt 6 restructring for the extras modules, this change exposes
the Jni APIs which are very important for Android platform. This patch
adds the APIs QJniObject, QJniEnvironment, QJniExceptionCleaner based
from private QtCore and QtAndroidExtras.
The Jni interface is cross-platform which justifies the name, but
currently, this API is used mainly for Android, and the naming comes
generic without Android keyword to avoid any future limitation on
supporting other platforms.
[ChangeLog][QtCore] Add new QJniObject, QJniEnvironment and
QJniExceptionCleaner APIs.
Task-number: QTBUG-89482
Fixes: QTBUG-89633
Change-Id: I4382dd53a225375759b9d042f6035a4a9810572b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
We missed takeBinding as a supported operation on Q(Untyped)Bindable.
To avoid adding version checks to code dealing with QBindableInterface,
we simply synthesize takeBinding as a combination of binding to retrieve
the binding and setBinding with a default-constructed
QUntypedPropertyBinding.
Change-Id: I43803a0dfe210353d0235f0373d2257f75ffe534
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was flaky in recent test runs on X11. Debugging
showed that the global position of the synthesized mouse
events was not correct due to the window not being mapped
properly. Use QTest::qWaitForWindowActive() instead of
QTest::qWaitForWindowExposed() to ensure that.
Task-number: QTBUG-90016
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ie1bc4157e6d0e807d8530f70dcbd27b5e2fc813c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We have plenty of places where we add some squares and take a square
root; this may be done more accurately and faster by hypot().
Introduce QHypotHelper to handle hypot with more than 3 parameters,
and with 3 when the C++17 version is missing (which it never should
be). Include an overload taking arbitrarily many valus and ensure that
we can use qHypot() with qfloat16. Illustrate with some example uses,
add some tests.
[ChangeLog][QtCore][QMath] Header <QMath> now provides qHypot(), an
implementation of std::hypot() taking arbitrarily many numeric values,
including support for qfloat16, while avoiding the overflow and
underflow problems that arise when naively taking the square root of a
sum of squares.
Change-Id: Ia4e3913fe83fc27d17d8e7f1a52f03ad445c1fed
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fetched from the authoritative source, verified the content matches
that of the current master revision in the github repository.
Amend one cookie jar test to find the last group in the last chunk
correctly - each group arises from a non-empty hsah-table entry, but
the last few hash-table entries may be empty, in which case the last
group isn't just before the last index, it's earlier by the number of
empty hash table entries. In the process, amend this test and the
related test of the end of the first chunk to iterate all the entries
in the group (in the present version, as it happens, each end-group
has just one entry, but that may vary).
Task-number: QTBUG-90214
Pick-to: 6.0 5.15
Change-Id: I6da365a6ca558124f8275e392735071dc77e04bb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Ported all properties, except activeThreadCount. Marking it dirty may
cause a re-evaluation of properties depending on it, which may reault in
a deadlock in case of trying to read activeThreadCount property which is
being marked as dirty.
Task-number: QTBUG-85520
Change-Id: Id073b0895c89a9e6b05b57ad520db994e550a1c9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- Skip unused metatype id
- Do not construct a QVariant from an int, when we instead want to
construct a QVariant for a given metatype (was: metatype id in Qt 5)
Pick-to: 6.0
Change-Id: I1ac19dec5549b424a9429f69999eaf8e96c022e2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
- Add move constructors to QRegularExpression, QRegularExpressionMatch
and QRegularExpressionMatchIterator.
- Update the documentation to explicitly state that only destructor
and assignment operators can be called for a moved-from object
Task-number: QTBUG-86634
Change-Id: I06b4f54e300541033a9a18339c97338717a06da0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Make use of the device pixel ratio in the QIcon paint method so the @nx
hi-dpi pixmaps are selected when appropriate when painting to a
QPainter.
Pick-to: 6.0
Fixes: QTBUG-90042
Change-Id: I53995a2285ef879e3c4fddb9f8da702e256a260f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Make stricter alignment requirements for the allocated header
This strict alignment allows reallocateUnaligned() to property account
for the padding occurring in cases when
alignof(QArrayData) < alignof(T) <= alignof(std::max_align_t), which
happens to be the case on e.g. 32-bit platforms with specific alignment
requirements.
This adds 4 bytes (the difference between alignof(std::max_align_t) and
sizeof(QArrayData)) of overhead for QString, QByteArray and certain QLists
on 32-bit systems.
Task-number: QTBUG-90359
Pick-to: 6.0
Change-Id: I8176a4cc79f100ee772b09425e88fe8ff3ae226a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This complements patch a148c7b5d71d244, where languageToCode(),
countryToCode() scriptToCode() methods were introduced, with matching
codeToLanguage(), codeToCountry(), and codeToScript() methods.
This allows us to remove the use of private Qt Core API in Qt Linguist.
[ChangeLog][QtCore][QLocale] Added static codeToLanguage(),
codeToCountry(), codeToScript() methods that convert ISO code strings
to the respective enum values.
Change-Id: If5c0843a718c006ade086a6f74ceb86ac6e0fce4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt is now always built with CMake.
The "cmake" keyword for QtTest blacklists remains for now. Removal is
tracked in QTBUG-90545.
Change-Id: I0011d56176a07c82698b2eb9aa330e77efa6cd34
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Initialize the offscreen platform plugin with no screens,
create QGuiApplication object.
Not much of the high-dpi related Qt API can be used
in this configuration, but at least Qt should not crash
on startup.
Task-number: QTBUG-71034
Change-Id: I6620843c3bd8b692c5c2419b1ba290e16175ba5b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This is an abstraction for TLS backend and its factory, preparing to transition
to plugin-based design.
Task-number: QTBUG-65922
Change-Id: Ibe810e77fd1b715a6bea66cd3f44312b015ac274
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This API gives the names of available backends and provides a basic
information about features/protocols supported by those backends.
Also, it has the 'loadBackend' functions which allow to select
a particular backend (which are becoming plugins).
At the moment, the implementation is still 'hardcoded', the
follow-up patch will allow to select different backends in runtime.
Task-number: QTBUG-65922
Change-Id: I05877de9c02857594e76b24d52e7578bdb01df69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
...when the platform does not support Vulkan. The version is left
at the default 0 then, so checking for >= 1.0 is wrong.
This allows the test to pass with the offscreen platform plugin.
Change-Id: I5afba8f1e703e4fa0ff41da91d18f5fabfb54868
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
To optimize certain operations, it can be useful to know whether we are
currently evaluating a binding. For instance, we have properties whose
storage is only alloctaed on-demand when they are set. However, we would
also allocate them if they are used in a binding context, as we would
otherwise not properly track the dependency. Using
isAnyBindingEvaluating in the getter, we can detect this
situation, and avoid the allocation if it returns false.
This API is private for now, as it exposes some internals of the
property system and should be used with care. As it needs to access the
TLS variable, it also has a non-negligible cost.
Change-Id: I373aabee644fe7020b2ffba7d6a0ad9a1e1b4ec0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The timeout defaults to 0, give it 5s.
Pick-to: 6.0
Change-Id: I975810a1ecee8bb8b3a3f143f1379a9a09589a40
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
The benchmark simply calls QRegularExpression's public API methods, so
that we can assess how changes to the implication impact performance.
(Its addition is prompted by evaluation of whether adding a move
constructor saves more or less than the resulting need for
d-pointer null-checks costs.)
Task-number: QTBUG-86634
Change-Id: Idef775ef6cf9f9ded3ce7ba5b85e460571d12756
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The plugins are meant to indicate what they do support, meaning users of
QNetworkInformation can choose to not care about which plugin is used
and rather just request what they want.
Task-number: QTBUG-86966
Change-Id: Ie130e1791250ec2a4470e3ba7081d982654af06c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing frequently, recently.
Pick-to: 6.0
Change-Id: I3ae00a64f67e4b6a0b5ade0c660805f4d12f8317
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Mouse wheel/touchpad scroll signals sent to the tab bar trigger
cycling through the tabs. In applications where the tab bar is
close to "mouse click hotspots", the cursor may accidentally be
left over the tab bar instead of the main content of the window.
When the user wants to scroll up/down the main conten, the
scroll signals are thus sent to the tab bar and instead of
scrolling, the focus switches to another tab. This is
confusing to the user, because not only does the application
not carry out the desired action (scrolling through the main
content), it jumps to a different tab. Two common examples of
applications affected by this nuisance are Konsole and any kind
of browser (file browser or web browser), where the address bar
is right below the tab bar. Moreover, on macOS, scroll events
do not have an effect on the tab bar widget of the native UI.
Currently, the code makes use of preprocessor directives to
achieve consistent behavior on macOS (`#ifndef Q_OS_MAC`). This
patch implements the check of a StyleHint in order to determine
if scroll events on the tabbar should have an effect. This
approach is more consistent with Qt coding style than
OS-dependent preprocessor directives and, in addition, makes
the behavior configurable according to the user's preferences.
[ChangeLog][QtWidgets][QStyle] Added
SH_TabBar_AllowWheelScrolling as a style hint to enable/disable
cycling through tabs using the scroll wheel. This defaults to
true in all styles except the macOS one so there is no change in
existing behavior.
Change-Id: I99eeb5a1aab03cbc574fac7187d85a8a2d60cf34
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Don't use raw pointers when allocating memory, it won't be deleted if
the test-cases fail.
Change-Id: I212a12c988f401f97c2c92a7fae09b2aa7d913a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Add INTERFACE_COMPILE_DEFINITIONS of Qt6::Core to generated rcc object
libraries. This propagates QT_NAMESPACE definition to the object
library.
Fixes: QTBUG-85620
Change-Id: I252d1aaee7b19a49bc321fdd271a5d85a34bf67f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Android doesn't have a trash bin, so this test is not valid for that
platform.
Pick-to: 6.0
Fixes: QTBUG-89398
Change-Id: I119b25682ba18e18466b5687cae369445dc73311
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This also needs improvements to qvkgen. What we get with this patch
are the Vulkan 1.1 and 1.2 core API's additional 11 instance-level
and 30 device-level commands present in QVulkanFunctions and
QVulkanDeviceFunctions.
All of these are attempted to be resolved upon construction. When the
implementation does not return a valid function pointer for some of them
(e.g. because it is a Vulkan 1.0 instance or physical device), calling
the corresponding wrapper functions will lead to unspecified behavior.
This is in line with how QOpenGLExtraFunctions works. The simple
autotest added to exercise some Vulkan 1.1 APIs demonstrates this in
action.
The member functions in the generated qvulkan(device)functions header
and source files are ifdefed by VK_VERSION_1_{0,1,2}. This is essential
because otherwise a Qt build made on a system with Vulkan 1.2
headers would cause compilation breaks in application build environments
with Vulkan 1.0/1.1 headers when including qvulkanfunctions.h (due to
missing the 1.1/1.2 types and constants, some of which are used in the
function prototypes). In practice this should be alright - the only
caveat to keep in mind is that the Qt builds meant to be distributed
to a wide variety of systems need to be made with a sufficiently new
version of the Vulkan headers installed, just to ensure that the
1.1 and 1.2 wrapper functions are compiled into the Qt libraries.
Task-number: QTBUG-90219
Change-Id: I48360a8a2e915d2709fe82993f65e99b2ccd5d53
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It used QString.compare() and assumed it was returning a bool true on
equality, when it actually returns an int that compares to 0 as the
given strings compare. So it should use compare() == 0.
This fixes several of QTimeZone's blacklisted tests on Android and a
crasher, which we dodged with a QSKIP. Added an id-comparison to a
test. Gave two local variables more informative names, made an early
return into a QSKIP so it explains itself.
Fixes: QTBUG-89905
Fixes: QTBUG-69122
Fixes: QTBUG-69132
Fixes: QTBUG-87435
Pick-to: 6.0 5.15
Change-Id: Icf18ed5a810143d6e65d36e34a70e82faac10b8e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
When creating a time-zone from a UTC+offset name that isn't known to
the system, QTimeZone (since the fix to QTBUG-77738 in 5.15.0) falls
back to constructing a suitable UTC-offset backend; however, the id of
this is not guaranteed to match the id passed in to the constructor.
In all other cases, the id of a QTimeZone does match the id passed to
its constructor.
Some utcOffsetId testcases had different id() than the id passed to
the constructor, due to mismatches where a zone was constructed using
the fall-back but the generated id included its minutes (as :00) or
omitted its seconds. The omission of seconds is clearly a bug, but we
also don't want to include :00 for seconds when it's not needed. So
change QTimeZonePrivate::isoOffsetFormat() to accept a
QTimeZone::NameType to configure how much we include in an id. Its
callers other than the relevant constructor (from offset) still get
minutes, even when :00, but will also get seconds added if that isn't
zero; and the constructor from offset now gets the short form obtained
by omitting all trailing zeros.
Since all valid whole-hour offset names that do include :00 for the
minutes field are in fact known standard offset names, the elision of
minutes will only affect zones created by ID in the case of a
whole-hour offset given without :00 minutes specifier, so these shall
necessarily in fact get the ID passed to the constructor. Creating by
UTC-offset with a name that specifies zero seconds will result in a
QTimeZone instance whose id() differs from what was passed to its
constructor (eliding the :00 seconds and potentially also minutes, if
also zero) but this should be the only case where a QTimeZone's id
doesn't match the one passed to the constructor, when constructed by
id.
Fixed inconsistency between the offset-constructor's declaration
(taking offset as int) and definition (taking qint32) in the process.
Added an id check to the utcOffsetId() testcase. Amended two tests of
offset-derived time-zones' IDs, added comments to make clear how one
of those differs from a matching standard name test and converted two
uses of QCOMPARE(, true) to QVERIFY().
[ChangeLog][QtCore][QTimeZone] QTimeZone instances created by offset
from UTC (in seconds) shall now only include minutes in their ID when
the offset is not a whole number of hours. They shall also include the
seconds in their ID when the offset is not a whole number of minutes.
Pick-to: 6.0 5.15
Task-number: QTBUG-87435
Change-Id: I610e0a78e2aca51e12bfe003497434a998e93dc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Original QML-specific connection mechanism ignores the receiver argument
and uses sender as receiver. This causes uncontrollable memory growth
in certain cases as connections on receiver persist even after receiver
is destroyed
New connect() with receiver parameter uses underlying API correctly,
disconnect is provided for the symmetry (not sure it's really needed)
Task-number: QTBUG-86368
Pick-to: 5.15 6.0
Change-Id: I4580d75b617cb2c4dfb971a4dfb8e943e325572b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently the codes are only exposed in aggregated form, i.e. through
name(), bcp47Name(). There are use cases though where you are only
interested in either language, country, or script codes. One example
is in Qt Linguist.
This patch therefore exposes the static languageToCode(),
countryToCode(), scriptToCode() methods that were so far only available
in the private API also in the public API.
[ChangeLog][QtCore][QLocale] Added static languageToCode(),
countryToCode() scriptToCode() methods that convert enum values
to the respective ISO code strings.
Fixes: QTBUG-39542
Fixes: QTBUG-64942
Change-Id: Ib1d5c3293e2f53245ba4c1fc8159275bcb290080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In Qt 5, QVariant::fromValue<T> would not compile unless
Q_DECLARE_METATYPE(T) was used, and Q_DECLARE_METATYPE(T) would lead to
a compile error if T were not copy constructible.
In Qt 6, we do not require Q_DECLARE_METATYPE before using fromValue,
and QMetaType itself works with non-copy constructible types just fine.
However, QVariant still requires it, thus we need to now enforce this in
fromValue itself.
Change-Id: Ib6964a438d8c46033dd3a037b9d871de2b42e175
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...as described in the Vulkan >= 1.1 spec. One can now call
supportedApiVersion() (before create(), similarly to the other
supported* functions) to determine the available Vulkan
(instance-level) version.
Fixes: QTBUG-90333
Change-Id: Ibe8482402b7f07e4abc48c88252ff0365e4e2faa
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
