Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is in preparation of deprecating QLinkedList.
There is but one substantial change: Instead of copying the linked list,
we move it now, and instead of copying items between these two lists, we
use std::list::splice(), which just relinks nodes. It is a bit surprising
that the comment on the ProValueMapStack suggests references into the
container must remain stable, and then some code changes addresses by
making copies of the elements.
This was probably a bug waiting to manifest itself.
Since nothing else in qmake is using QLinkedList now, remove qlinkedlist.o
from the qmake build.
Change-Id: I08a5b0661466bf50ad8f9f8abf58bc801aef4ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also clean up QTextCodec usage in qmake build and some includes
of qtextcodec.h.
Change-Id: I0475b82690024054add4e85a8724c8ea3adcf62a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This deduplicates the code between QFileSystemEngine and QLockFile.
Change-Id: I1eba2b016de74620bfc8fffd14cd005d5fd9beaa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This fixes the following warnings when building qmake:
Makefile:359: warning: overriding commands for target `qrandom.o'
Makefile:335: warning: ignoring old commands for target `qrandom.o'
Change-Id: I2c7abbe095862303c1969a70f61b8a57009d44ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake really lacks version comparing functions:
users either use ugly constructions to compare versions
by components, such as
greaterThan(QT_CLANG_MAJOR_VERSION, 3)|greaterThan(QT_CLANG_MINOR_VERSION, 4):
or even incorrectly compare versions as strings:
!lessThan(apple_clang_ver, "5.1")|!lessThan(reg_clang_ver, "3.4"):
Add test functions versionAtLeast and versionAtMost which use
QVersionNumber to compare version numbers by components.
Change-Id: I65e6b3c296d0301d544b7e38bf3d44f8d555c7fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In the source list, put one file on each line, sort alphabetically
within each of several blocks (preserving the order of those blocks),
add missing entries for which we have rules. Document where QTSRC and
friends come from, eliminate duplication between their entries and
DEPEND_SRC (which pulls them in anyway). Document strays not in OBJS
or QOBJS, fix qmake.pri to add to SOURCES not OBJECTIVE_SOURCES.
Put OBJS and QOBJS entries in the order that matches DEPEND_SRC.
Change-Id: Id38cccd9b1f849a865a265bc0e6ce4c426c42eea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Also split a long list of -I flags so that "for each platform" dirs
all land on the same line, rather than breaking part way through the
platform list.
Change-Id: I855f6b152567bc2031e08361d2b02a788df8287e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Most continuation lines in long variable values indented with a tab
and some space; three used spaces only; make them match the rest.
A foolish consistency is the hobgoblin of my little mind.
Change-Id: I7e51ea830040efe62801e80a49486d26dd2a3978
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
I found no $(QMKGENSRC)/mac/xmloutput.cpp; but skipping the mac/ in
its name reveals a perfectly good file, that might even be relevant.
It's also the file named in a rule further down the file.
Change-Id: I72b399f9c3c222fc6beed29f2007fe55ba5b8412
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the file contains no code.
this avoids complaints from ar/ranlib in static/bootstrapped builds.
Change-Id: Iee22ffc61a5f9ea8c25f5455b7e8e017ac521624
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
now that configureapp does not use it any more, qmake is the only
remaining user. and the license headers already claimed that this code
is part of qmake ...
Change-Id: I9b8a16f8f2b432d2b1143efbdd1f0042305ccc0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... instead of having (duplicated) code in the configures to create it.
Change-Id: Ia86b44021a024a969f5a49b7fb18d3d414869f93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add a qconfig-bootstrap.h, which contains all the defines required
to build the bootstrapped tools. This will be required anyway when
moving more code over to use QT_CONFIG(foo) instead of QT_NO_FOO.
Change-Id: I783d0aa0100b9190fe2d422bee4a95b05720aebe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This class provides a "type safe" way to compare and access operating
system version numbers.
[ChangeLog][Deprecation Notice] QSysInfo::windowsVersion() and
QSysInfo::macVersion() are deprecated and are replaced by the newly
introduced QOperatingSystemVersion.
Change-Id: I52b532de2e068ccf90faaa8342eee90c0a4145de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CFURLCreateDataAndPropertiesFromResource and
CFURLWriteDataAndPropertiestoResource have been
deprecated since 10.9. We replace them with simple
QFile access.
Code cleaning and included.
Change-Id: I19c7ceac41c8c511962f1128bd8e210e3adb434c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Port the last four remaining Q_FOREACH users in qmake
and uic to C++11 range-for and mark all qtbase tools
(incl. qmake) as Q_FOREACH-free, using QT_NO_FOREACH.
Change-Id: Ief4e5877269e7a853e4cf05e58861a448e822d3d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it never left the rudimentary stage. should it ever be re-added, it
needs to be done basically from scratch anyway.
Change-Id: I76858c8a2c90235f228f7a6e5a178a10a2669d37
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Gestalt is deprecated so we can't use it long term. At the same time,
the new API is cross platform, so we'll no longer have to parse strings
in -[UIDevice systemVersion] either.
Change-Id: Ic81797174c1a3d50b47b9b209205a6a506cc75ef
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This allows to use the "test mode" of QStandardPaths in unittests,
to stay away from the user's real settings.
Change-Id: I1cb1f63a4bff35dfe236924c4dcd7cf761ee50c1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This injected quite some code on every use of qDebug and friends,
while not giving any measurable performance benefits.
Change-Id: I7b51f99130f18f1252da01e313f7b97c43a5480d
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
while the dependencies in the manual projects are crappy anyway, it is
still worth to cover the case of the user changing the install paths.
Change-Id: I0a7ca5c8ba660c689d6d7af6b65d878390d6456f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
