Android 5 doesn't extract the files from libs folder unless they are prefixed with "lib".
This patch sets a proper name for the plugin which will make gdb happy and it will also
avoid any name clashes.
If we rename the plugins when we copy them, gdb won't find them, therefore it can't load their
symbols.
On Android all the libs are in a single folder, so to make sure we don't have any name clashes,
we are prefixing the plugin name with it's relative path to qt folder (we replace / with _).
Fixes: QTBUG-78616
Change-Id: I7e0e67d65448532769d69f46b1856c029e2cf5cb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Multi arch build in one go is need to support the new .aab packaging format.
By default the users apps are built for all Android ABIs: arm64-v8a armeabi-v7a x86_64 x86
The user can pass ANDROID_ABIS to qmake to filter the ABIs during development,
e.g. qmake ANDROID_ABIS="arm64-v8a armeabi-v7a" will build only for arm ABIs.
[ChangeLog][Android] Android multi arch build in one go,
needed to support the new .aab packaging format.
Change-Id: I3a64caf9621c2a195863976a62a57cdf47e6e3b5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
users may want to use pkg-config regardless of whether qt itself was
built with it. that's particularly relevant when using binary packages
on macos while trying to use 3rd party dependencies from homebrew.
Task-number: QTBUG-36256
Change-Id: I15e6d0bf5cdaff4274e2d7c07917e97f29157a5c
Reviewed-by: Massimo Callegari <massimocallegari@yahoo.it>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this makes build dirs consistent with install dirs, which fixes
launching tests, examples, and build tools in some configs.
unfortunately, this makes prefix builds slower and their build dirs
bigger due to the DLLDESTDIR implementation being stupid (QTBUG-11435),
but i'm not inclined to fix that now. it isn't actually worse than for
non-prefix builds, so whatever.
Task-number: QTBUG-54438
Change-Id: Idbd034620e95cb23f7699d243678c4e9fa6353ac
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This patch moves towards a more sensible layout for UIKit platforms,
where both the device and simulator architectures for binaries are
combined into a single Mach-O file instead of separating out the
simulator architecutures into separate _simulator.a files.
This approach is both more common in the iOS ecosystem at large and
significantly simplifies the implementation details for Qt, especially
with the upcoming support for shared libraries on UIKit platforms.
This patch takes advantage of the -Xarch compiler option to pass the
appropriate -isysroot, -syslibroot, and -m*-version-min compiler and
linker flags to the clang frontend, operating in exactly the same way
as a normal multi-arch build for device or simulator did previously.
Exclusive builds are still enabled for the xcodebuild wrapper Makefile,
which builds all four configurations of a UIKit Xcode project as before,
as expected.
A particularly advantageous benefit of this change is that it flows very
well with existing Xcode workflows, namely that:
- Slicing out unused architectures is handled completely automatically
for static builds, as an executable linking to a library with more
architectures than it itself is linked as, the unused architectures
will be ignored silently, resulting in the same behavior for users
(and the App Store won't let you submit Intel architectures either).
- Removing architectures from a fat binary using lipo does NOT
invalidate the code signature of that file or its container if it is a
bundle. This allows shared library and framework builds of Qt to work
mostly automatically as well, since an Xcode shell script build phase
can remove unused architectures from the embedded frameworks when that
is implemented, and if Qt ever starts signing its SDK releases, it
won't interfere with that either (though binaries are just resigned).
Change-Id: I6c3578c78f75845a2fcc85f3a5b728ec997dbe90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Added a qtConfig(feature) function to qmake, and a QT_CONFIG(feature)
macro. These can safely check whether a certain compile time feature of
Qt is enabled or not.
For this to work the feature has to have a publicFeature or
privateFeature output in the configure.json file.
In pro files, please use the qtConfig(feature) test function
instead of checking contains(QT_CONFIG, feature), as the latter
will be unreliable with the upcoming modularization (it requires a
load(qt_module_config) before doing any such checks). Note that
feature names are now lowercase, and identical (except for hyphens
versus underscores currently) in the pro and c++ files.
This makes the logic easier to follow, as we avoid all double negations,
and most importantly, QT_CONFIG and qtConfig are implemented in a
way that you'll get a build error for a mistyped or non-existent
feature. This will also prevent accidental use of a widget feature
in gui in the future.
This gives us complete symmetry between the handling in pro and
c++ files.
Change-Id: I60404f97953724e639ffb6386cce2e8b1e4b735a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
get rid of the entirely superfluous stock "Aborting." messages -
the event triggering the exit has already reported the problem.
Change-Id: Ib9dfb9e4212f60eceb2ea432cdf56c5a8afe9d65
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
This patch adds a warning that will be shown when link_pkgconfig is used
in a project but Qt's configuration has it disabled. This can happen
when Qt is built before pkg-config has been installed or if it's not
detected.
This will avoid user losing time trying to make pkg-config work while Qt
just ignores it.
Change-Id: Ieeff8dd6784b9430cfebef355855ec1be91bc96e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This reverts commit c4ecb81d6d.
Hard-coding the library suffix into the linker flags was wrong. The
library suffix is handled at runtime with DYLD_IMAGE_SUFFIX, set
as part of the Xcode scheme or during debugging in .lldbinit.
Change-Id: I11907b2755f7f187fb6fa18202813fde9ada4354
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is necessary for combined device and simulator builds on Apple
platforms (iOS, tvOS, watchOS) to link properly.
Change-Id: I21e70806643b10f429945d3020995dc94fa5c612
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without this, any test executable requiring a plugin path from
the environment's QT_PLUGIN_PATH will fail to run since the path is
overwritten when generating the 'make check' command, for example:
QT_PLUGIN_PATH=/path/to/qt/plugins \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
A prepend config option is used for *PATH to preserve the envvar
value, so use the same option for QT_PLUGIN_PATH. The command above
then becomes:
QT_PLUGIN_PATH=/path/to/qt/plugins${QT_PLUGIN_PATH:+:$QT_PLUGIN_PATH} \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
Change-Id: I69b43327974915eae52f299fc4001effe93a491a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
proper prefix builds don't have the redundant .dlls in bin (the copy
step is simply omitted), so this is broken. the change would have to be
done atomically with making DLLDESTDIR sane.
This reverts commit 9b2e98245a.
Task-number: QTBUG-50065
Change-Id: I9ce0a2d1147a1a2d4bd2f22e619d5c737864a637
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this is just an optimization/clarification: variables which are known to
be never empty (like PATH) can be extended with less convoluted code.
Change-Id: Ib365bbec8301673ed1c874979b4de19bc983dab1
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
longer term, the redundant .dlls from the libdir will hopefully
disappear. short term, this is a workaround for CI brokenness.
Change-Id: Ia30173355f3aca222d4ca40e7a38c2cf535bbc03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qt_framework and {app,lib}_bundle imply darwin, so there is no point in
testing for it.
Change-Id: I9fe48c26c8e271a5575b17e92df8674d3c3a3204
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
there is no particular reason to have them in qt_functions.prf any more,
while the separation made the code harder to follow.
Change-Id: Ie44c9784358f382f7bc863b421ff5b440211d66f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no particular reason to have it in qt_functions.prf.
Change-Id: I88ed1ea937a9a88a4625a6de7bcd3a29957560da
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the rpath applies only to the installed on-device location and is
consequently always the same for all modules, so there is no point in
indirections.
Change-Id: Ia0590552aa317d799a2d3879fd0c0768344b9645
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
When building a module for the first time the paths won't exist as they
are only created when you run "make". However, if you run qmake with
'-r' you need the compiler flags to be available already before that.
Task-number: QTBUG-43175
Change-Id: Ib784c432f29bb8c62b9ef23e59ccb515e1d96f28
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the function is used in our examples and code generated by qt-creator,
so the qt5-specific magic behavior is inappropriate. create a separate
function instead.
Task-number: QTBUG-44595
Change-Id: I4d72cc1e5cbfc274b3210520baa213f4c5479ca9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for sh, this is usual quoting.
for cmd, this means escaping closing parens - everything else is permitted
anyway.
Change-Id: I1179849d95f1f1f9e4b0d62ecd88917a1327f60f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Whenever a binary is created and linked against a static lib that was
compiled with LTCG, the final linking step requires the compiler flags
so that the pre-compiled data in the shared library can get properly
compiled.
This could happen for a static build of Qt with LTCG, but also happens
frequently for Qt's own build when linking regular libraries and
applications against QtBootstrap or QtPlatformSupport. The linking fails
when the target is a shared library (example: QtWaylandClient linking
against QtPlatformSupport).
The .prl file actually contains the "ltcg" flag, so the best solution
would actually be to process that flag there and add link_ltcg if any
dependent .prl has "ltcg", but I couldn't find out how to do that.
Change-Id: I4a75a14d1dcb8c2089a427285e25d5555df7d7d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
to this end, add a mode to qtPrepareTool() which prepares the primary
variable for system() use (instead of use in makefiles).
Task-number: QTBUG-41032
Change-Id: If6aa6c206a70ecdbc2ea05bbb3cb470414fb02b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
