- Those files were moved as part of Qt3D as its the sole
user of these
- Also removed associated unit tests
Pick-to: 6.2 5.15
Change-Id: I302bc219218a58071c86d2447cb4449601fca32c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
We can only start timers in threads started via QThread, and even then
we cannot assume that the thread runs an event loop. So only start the
timer when we are in the main thread.
Add a test that verifies that we don't get the warning message.
Pick-to: 6.2
Change-Id: I40d7d9ff115720f9ecd3eedaebbade2643daf843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Unlike the other conversion functions, convertWithPalette() did not
call copyMetadata().
Fixes: QTBUG-96926
Pick-to: 6.2 5.15
Change-Id: I2b171cec16bc5a90d33e80d6fe178c650ed3fe36
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
After the recent refactoring in 28b14b966f
this test should run stable on all platforms. However, the way the test
was written made it quite flaky. Simplify it to verify that closing one
window doesn't prevent a second timer to fire (which it would if closing
the first window already quit the application).
Change-Id: I0306792cd7573ebd3418d1aabffe2b78700ec2d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Verifies that we get the messages we want, and makes it easier to see
relevant debug output.
Pick-to: 6.2
Change-Id: Ide92959b120f325badbf200236cdc85f72226e1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QVLA itself is non-relocatable due to self references. (ptr pointing
to array[Prealloc] as long as capacity < Prealloc)
Seems we shot ourselves in the foot in multiple places with this.
Pick-to: 6.2 6.2.0
Fixes: QTBUG-96619
Change-Id: I57a2ce539b671326cd352dbe57a1f3d4c46a6456
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QDoubleValidator::setRange() used to have 3 parameters, with
the third one (the number of decimals) having a default value of 0.
Such default value does not make much sense for a *double* validator.
Also, since a default value was used, omitting the decimals was
silently overwriting the previous decimals value, discarding the
value that could be previously explicitly specified by user.
[ChangeLog][QtCore][QDoubleValidator][Important Behavior Changes] The
QDoubleValidator::setRange() method now has two overloads.
The first overload takes 3 parameters, but does not support a
default value for decimals.
The second overload takes only two parameters, not changing the
number of decimals at all.
Hence, the number of decimals will only be changed if the user
explicitly specifies it.
To maintain the old behavior of setRange(), pass 0 as the 3rd
argument explicitly.
Note that it is a source-incompatible change. But it should be fine,
because using QDoubleValidator with 0 digits after decimal point does
not make much sense and so, hopefully, is not that common.
At the same time, change the default-constructed QDoubleValidator
to use -1 for decimals, which allows arbitrarily many digits in
the fractional part. The value was previously 1000, which allowed
more than anyone would reasonably use, so this should make no
practical difference.
Some more unit tests to cover the behavior of the setRange()
overloads are also added.
As a dirve-by: remove unnecessary QValidator::State to int conversions
in the unit tests. QCOMPARE is capable of comparing these enums and
provides a better output in case of failure for enums.
Task-number: QTBUG-90719
Change-Id: I523d6086231912e4c07555a89cacd45854136978
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
...when starting a render/compute pass.
This matches most other backends in fact, the Vulkan backend has
just certain historical differences, and is complicated due to the
fact that it has the option of using secondary command buffers for
passes that specify ExternalContents (to support the case of wanting
to issue direct Vulkan commands in a code block surrounded by calls
to beginExternal and endExternal).
Not resetting state such as the currently bound index buffer when
starting a pass quickly blows up when two consecutive render passes
use different settings, one targeting the primary while the other
the secondary command buffer. Instead of further complicating the
logic, just reset the relevant state in every begin(Compute)Pass.
Comes with an autotest that is crafted so that it manages to
downright crash when run with Vulkan without the fix to the backend.
Fixes: QTBUG-89765
Pick-to: 6.2
Change-Id: I8dc47bd179c17d45a0556ec31200dc90c4b67ca5
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The provided implementation tries to fix positions for the group
separator.
In case of scientific notation it can also converts the value to
normalized form.
It uses QLocale::FloatingPointShortest internally to convert the
double value back to string, so the number of decimals may change
after calling this method.
Change-Id: I963bc5f97b653e2bb912f4b95b09a4d1ee201e7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Follow what has been done for QRhiShaderResourceBindings. Have a way
to retrieve an opaque blob (that just happens to be a list of integers)
so that a simple == comparison can be used to determine compatibility
even when the objects from which the blob was retrieved are no longer
alive.
The contract is the following:
bool a = rp1->isCompatible(rp2);
bool b = rp1->serializedFormat() == rp2->serializedFormat();
assert(a == b);
Pick-to: 6.2
Change-Id: I45e7d05eeb6dfa2b2de474da0a0644912aaf174a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
a332f3fabc disabled resolving all fonts
on the system for every font lookup, which was a significant startup
time improvement. But it also caused a regression: When a font has
an alias which shares the name of a proper font, then this would
not be resolved correctly.
This is fairly typical on Windows/GDI due to backwards-compatibility.
Instead of being collected under a shared typographical family, fonts
are disambiguated by adding the style name to the family name. The
proper typographical name is still available, but this is not
enumerated by the system.
So "Segoe UI" for instance, will be available as "Segoe UI",
"Segoe UI Light", "Segoe UI Bold" etc.
When we populate family aliases, we register that "Segoe UI Light"
is actually "Segoe UI" with Light weight, and prior to
a332f3fabc this would be done implicitly.
But after the optimization, we would only populate family aliases once
we stumbled over a font request for a non-existent font. For "Segoe UI",
we would simply return the regular weight font as the best imperfect
match.
The fix is to populate font family aliases not only when the family is
non-existent, but when the match is imperfect, e.g. if we are asking
for a Light weight font and only finding a regular one. User code can
still avoid this somewhat expensive operation by using the full
family names on Windows.
This also requires a fix to a test. When removeApplicationFont() is
called, we invalidate the font database, so it will be reset to a state
that does not contain the family aliases. Therefore we cannot guarantee
that it is identical to what it was before the test started, since this
depends on what has happened previously in the application.
[ChangeLog][QtGui][Text] Fixed an issue where some font styles and weights
would not be selectable. This was especially noticeable on Windows.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-94835
Change-Id: I892855edd1c8e3d3734aace396f6000d897d2ec4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Export configuration() and setConfiguration() from the offscreen
platform plugin using QPlatformNativeInterface. tst_qighdpi can
then resolve and make use of them since it always uses the offscreen
platform plugin.
Add screenDpiChange() auto test.
Change-Id: I459b4df5d94ec4991234a346e3a94618cb3485e9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Noticed the missing tests while implementing fixup() for
QDoubleValidator.
Change-Id: Ic0e053a6385e311e4a491c8bff8ec7fbb83c3944
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Be idiomatic and return the output iterator one past the last element.
Otherwise passing in a plain pointer (as exercised by the autotest now)
fails to function because we write over the same 4 elements again and
again for each binding.
Pick-to: 6.2
Change-Id: If74463fa5140ffa2b1d5be97b71868848ad46614
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...by the Qt Quick renderer, for example.
A typical Qt Quick material binding set serializes to 8 uints. This
would not demand a container like QVector. However, being implicitly
shared is essential here due to the intended usage (query the
serialized blob, put it into a cache key, hash it, compare it, all
without any copying and new allocs; we can afford an extra alloc
upon each srb construction, but don't want more afterwards in the
rendering engines)
Also make it clear in the pipeline docs that the optimization Qt Quick
is (soon going to be) doing is legal. (the srb ref in the pipeline can
be dead and dangling as long as every call to setShaderResources()
specifies a layout-compatible alternative)
Pick-to: 6.2
Change-Id: I97efbea1fa3516b10c9832adbab0a21b7bc0845d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Verify that closing a QWindow using either the close()
API or a close event works as expected, and that the window
can be re-created. Also test QWindows with child windows.
Task-number: QTBUG-46701
Change-Id: I4c12452ff58e1233536c2d6932e72cf924d8ed74
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We can't really compare two NaN's. Should use qIsNaN() for that.
Pick-to: 6.2
Change-Id: Ia514cabe65cfcdeafb39cab91ecdb66f8fae725c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previous fix hit too widely so some valid horizontal and vertical
lines were affected; the root problem being that such lines have an
empty control point rect (width or height is 0). Fix by caculating in
the pen width.
Pick-to: 6.2 6.1 5.15
Change-Id: I7a436e873f6d485028f6759d0e2c6456f07eebdc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One is a bad application or library in this case, but nonetheless
we should handle this more gracefully then just crashing due to
the QRhi already having been destroyed. Mainly because in Qt 5 one
could get away with the same: releasing OpenGL objects underneath,
for example, a QSGPlainTexture with no (or wrong) GL context did
not generate any user visible fatal errors. So we should not crash
in Qt 6 either with these code bases.
In debug builds or when QT_RHI_LEAK_CHECK is set, one will get the
unreleased resources warning printed in Qt 6, which is a step
forward compared to Qt 5. So there is still some indication that
something is badly designed, even if the application survives.
Task-number: QTBUG-95394
Pick-to: 6.2
Change-Id: I944f4f425ff126e7363a82aff926b280ccf1dfc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
When saving to a QIODevice, QImage and QImageWriter will automatically
deduct the file format from the filename if it determines that the
device is a QFile. That did not work for a QSaveFile device. Fix by
using the common ancestor, QFileDevice, in the implementation.
Fixes: QTBUG-89022
Pick-to: 6.2
Change-Id: Ie01d80df4f29ca0d4ff30bf7e1b77605293c070e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... instead of raw pointers or QSharedPointer.
Raw pointers are, of course, a no-no in modern code. In particular,
when the result is then held in shared_ptr or QSharedPointer,
make_shared or QSharedPointer::create() should be used to reduce
number of memory allocations.
Since this is private API, we're free to use std::shared_ptr, which
does only half the atomic operations on copies, compared to
QSharedPointer, so is more efficient.
For either make_shared or QSharedPointer::create(), we need to work
around the private ctor, which we do by inheriting a member-function
local class from QColorTrcLut and make_shared'ing that. As a
member-function-local class, it has access to the otherwise private
parts of QColorTrcLut, including its default constructor. As a public
subclass, shared_ptr has no problem performing the derived-to-base
pointer adjustment in the return statement. This way, we can use
make_shared even though our target's class' ctor is private.
Change-Id: Icb11249b54cd5e544e692f6a0bf1f9dda1710454
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
... by making the test class a friend of the CUT, as we do elsewhere
for the same reason.
This allows to remove the duplicated enum and struct in favor of using
The Real Thing™, which means the test can no longer go out of sync
with the CUT anymore.
Change-Id: I87dc8bb4a5476ae4fc99e006c4690e96d2f530d2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Makes it able to catch the last bug of saturating color values above a
certain value.
Change-Id: Ib2a3918623a1defe2981efe61cf8118e019e9d4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We need those events to trigger palette color group changes in QQuickItem
without having to connect every item to yet another QWindow signal.
Task-number: QTBUG-93752
Pick-to: 6.2
Change-Id: I8534808cdaab828e5876f8fda31567aeb1b4272a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Handy when one has the data buffer to be read in a QBAV.
This also fixes an issue and compiler warning about passing a
qsizetype data length value as an int, and makes it possible to pass
a qsizetype-size length without going through QByteArray.
Makes the QByteArray overload redundant.
Change-Id: Iba8825cf0fd8003fb2eac5b1d30a61ec91b85ceb
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When rotating M_PI_2 based on x-axis, quaternion to euler conversion
makes NaN for the x-rotation value. This patch fixes this corner case.
Fixes: QTBUG-93600
Pick-to: 6.1 6.0 5.15
Change-Id: Ice321a80ad90dba9cf3ee3a14ec7d3d047c21bd3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Supported on OpenGL (and ES) 3.0+ and everywhere else.
Can also be a render target, targeting a single slice at a time.
Can be mipmapped, cannot be multisample.
Reading back a given slice from a 3D texture is left as a future
exercise, for now it is documented to be not supported.
Upload is going to be limited to one slice in one upload entry,
just like we specify one face or one miplevel for cubemap and
mipmapped textures.
This also involves some welcome hardening of how texture subresources
are described internally: as we no longer can count on a layer index
between 0..5 (as is the case with cubemaps), simply arrays with
MAX_LAYER==6 are no longer sufficient. Switch to sufficiently dynamic
data structures where applicable.
On Vulkan rendering to a slice needs Vulkan 1.1 (and 1.1 enabled on the
VkInstance).
Task-number: QTBUG-89703
Change-Id: Ide6c20124ec9201d94ffc339dd479cd1ece777b0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add NEON for RGB32 and RGBA64 writeback, and SSE2 for
RGBA64 writeback.
Change-Id: Id9ee803267a78f5bdff5beaa719e7a59c1dbb9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The existing conversions weren't handling gamma correctly and used
an ad-hoc definition of gray instead of based on true luminance.
[ChangeLog][QtGui] RGB conversions to grayscale formats are now
gamma-corrected and produce color-space luminance values
Change-Id: I88ab870c8f5e502ddb053e6a14a75102239a26f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In QFileSystemModel, in some cases the hostname in a UNC path is
converted to lower case and stored in the root node's visibleChildren.
When QFileSystemModel sets the UNC path as the root path, it tries to
get the row number for the host, but it didn't convert the hostname to
lower case before getting the row number, which resulted in the host
not found in the root node's visible children. As a result, it returns
-1, an invalid row number. Change the behavior to find the node for the
host using the host name case-insensitive and then get the row number.
Fixes: QTBUG-71701
Pick-to: 5.15 6.0 6.1
Change-Id: Ib95c7b6d2bc22fd82f2789b7004b6fc82dfcb13b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Normally we only allow creating wrappers for texture objects. These
can then be used with a QRhiTextureRenderTarget to allow rendering into
an externally created texture.
With OpenGL (ES), there are additional, special cases, especially on
embedded. Consider EGLImages for example. An EGLImageKHR can be bound to
a renderbuffer object (glEGLImageTargetRenderbufferStorageOES), which
can then be associated with a framebuffer object to allow rendering into
the external buffer represented by the EGLImage. To implement the same
via QRhi one needs a way to create a wrapping QRhiRenderBuffer for the
native OpenGL renderbuffer object.
Here we add a createFrom() to QRhiRenderBuffer, while providing a dummy,
default implementation. The only real implementation is in the OpenGL
backend, which simply takes a renderbuffer id, without taking ownership.
Task-number: QTBUG-92116
Change-Id: I4e68e665fb35a7d7803b7780db901c8bed5740e2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
takeItem and takeChild do not signal the change correctly to the
external world, this change fixes the problem
Fixes: QTBUG-89145
Pick-to: 6.1 5.15
Change-Id: Ib4844ace53007068a2cd62eba64df99e6e45fdc0
Reviewed-by: David Faure <david.faure@kdab.com>
