tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Known to fail now and then, most likely due to the mouse cursor
moving while the test is executing.
Task-number: QTBUG-60754
Change-Id: Id8f0786416d0df33f197a7a8f99b7aad1341a6be
Reviewed-by: Liang Qi <liang.qi@qt.io>
This enforces decoupling and in the case of QMacStyle, isolates
QtWidgets and therefore end user applications, from Carbon/HITheme.
Windows and Fusion are platform independent, so they remain built-in
(but mostly because the Windows style is tightly coupled to other styles
like QStylesheetStyle).
Task-number: QTBUG-59428
Change-Id: Id6519fe0c5269c1bce5b5921f9db06257032a1c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
GCC bug 68949 causes tst_QGraphicsGridLayout and tst_QGraphicsLinearLayout
to fail on 5.2.x/5.3.x: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68949.
This change adds aggregate initialization to QSizeF arrays to work around
the bug. The bug was discovered when compiling and running tests on ARM
with GCC 5.3.0.
Change-Id: I9ecf7b032b6ca1477c29dca3bd7d0ec8d69a0454
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... for calculated test data names.
That involved removing the leading ", " from test name literals
(folding it into the format string) and porting from some QString code
to QByteArray to make the result usable with addRow(), which does not
support %ls...
Change-Id: Icb2344778203f10939ae46b9e46872101f3878a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Store QGraphicsItems that are either not added to a scene or
removed from it again and that are also not children of other
items - iow: those that were leaked, even on successful runs
of the tests, in either a QScopedPointer, or, where that'd
cause too much churn due to adding of .data() calls, back the
pointer by a stack-allocated object.
This fixes the remaining leaks reported by GCC 6.2.1's ASan on
successful runs of tests/auto/widgets/graphicsview/qgraphicsitem.
Change-Id: I61c3a1cd39b9e96e83c5d7b8cf392e0b26ecbaf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also bump minimum required Qt version for Android: Ministro updates.
Conflicts:
src/android/java/src/org/qtproject/qt5/android/bindings/QtActivityLoader.java
src/android/java/src/org/qtproject/qt5/android/bindings/QtLoader.java
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: I966f249bebf92da37bfdeb995ad21b027eb03301
The vast majority is due to leaking styles in a data-driven
test with almost 100 rows (scrollBarRanges()).
Fix by creating the style into a QScopedPointer.
The remaining ~500 leaks were due to leaked QGraphicsScenes.
They had no parent, and QGraphicsView::addScene() does not
adopt them.
Fix those by passing the resp. view as their (QObject) parent.
Change-Id: I4316798019114ea3d7504d72cd83d534a21149c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Turn the list of newRow() calls into a for loop over a constexpr
data structure.
Fixes the GCC note:
tst_qgraphicsview_2.cpp:47:13: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without
and speeds up compilation of the file from 13s to 2.5s on my
machine.
Task-number: QTBUG-38890
Change-Id: I4f0b3565c7df64b286d1d32eb3f3d6bf4df92609
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Found by UBSan:
tst_qgraphicsitem.cpp:5066:29: runtime error: downcast of address 0x2afcb006c7f0 which does not point to an object of type 'GeometryChanger'
0x2afcb006c7f0: note: object is of type 'QGraphicsRectItem'
00 00 00 00 d8 64 ca 98 fc 2a 00 00 40 a9 0b b0 fc 2a 00 00 75 65 29 00 00 00 00 00 35 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QGraphicsRectItem'
#0 0x4c5f1c in tst_QGraphicsItem::prepareGeometryChange() tst_qgraphicsitem.cpp:5066
Fix by actually instantiating a GeometryChanger, which incidentally is
the pattern used by paint() a few lines below, too.
While at it, allocate the item on the stack (as is done in paint())
and create a local QRectF variable to avoid repeating the same magic
numbers over and over again.
Change-Id: If5a3d56511000a17703d78d7dd1f0ea072b8bc11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These auto tests were trying to not create native dialogs, but setting
the QFileDialog::DontUseNativeDialog option is too late to control the
creation of the platform helper. It is already created at construction
time, unless Qt::AA_DontUseNativeDialogs is set.
Task-number: QTBUG-55276
Task-number: QTBUG-55281
Change-Id: Icf474e97059ac03a5fa01bd3a17f07203da5770a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QStyle was created but never removed
Change-Id: I55011377afd475af28e4ce2cf657e435dd37c96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
There is nothing guaranteeing there will be a paint request after
resizeViewportFramebuffer() is called. However we must not be left
with a framebuffer with uninitialized content. So trigger an update.
Include also a half-hearted autotest. QOpenGLWidget (or QGLWidget)
viewports have not been autotested at all. Try to verify that it
is functional at least, even if we cannot check the actual output.
Change-Id: I34d78fe32e94c39dad919216b5a4f4bb2aea3cc2
Task-number: QTBUG-52419
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Introduce a function going up the widget hierarchy determining a QTransform
for mapping the coordinates applying the transformations of any QGraphicsView
instances found. In mapFromGlobal(), use the inverse of it. This fixes the
case of widget hierarchies embedded into QGraphicsView with transformations.
Increase fuzz in the tests due to float rounding errors.
Task-number: QTBUG-41135
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Task-number: QTBUG-52507
Change-Id: I507e0bccd546250fe9c2d1b74ef38657d61490b4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test is preventing us to take RHEL 7.1 in the CI for Qt 5.7.
Changed the paintEvent() test to be less strict about the paintCount.
Task-number: QTBUG-51809
Change-Id: I84f797442e38c66dc23862e92eda6db08bcac368
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
1. Use qrc for test data so that it can be found on all platforms.
2. Skip a test which does not work on platforms where show() implies
showMaximized(), as it depends on the window size being 150x150.
3. Skip test for hover event which depends on having a valid
mouse cursor position.
4. Skip a couple of tests that fail on some Android devices.
It's not worth spending a lot of time investigating this at the
moment.
Change-Id: Icb2b7f1d82981546a2154a76535b95606d7f40da
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This reverts commit 56aad2ad60.
QWidget::mapFromGlobal() does not work correctly when the widget is
a child widget of another widget embedded into a QGraphicsView with a
transformation (scaling/rotation). It starts applying offsets going
up the widget tree (just as mapToGlobal) until it hits the embedded widget
not taking into account the transformation.
It would need to go in from to top to bottom or better be reimplemented
such that a QTransform for mapping coordinates from/to global is determined
which is then applied in reverse.
Task-number: QTBUG-50030
Task-number: QTBUG-50136
Change-Id: Iadeb891d793be1938c64942bfbf38d541a281c33
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test produces compiler warnings in release builds:
tst_qgraphicswidget.cpp: In member function 'void tst_QGraphicsWidget::setTabOrderAndReparent()':
tst_qgraphicswidget.cpp:1521:89: warning: 'w2' may be used uninitialized in this function [-Wmaybe-uninitialized]
tst_qgraphicswidget.cpp:1536:88: warning: 'w1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Use arrays instead of the variables w1,2... and rewrite the helper
function compareFocusChain() to work on iterators allowing to
remove some temporary lists. Also return error messages in a
QByteArray ready for the Q[TRY_]VERIFY2 macros.
Change-Id: I43466921af59521d1faf00b75fe943508418abb3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
When working with QGraphicsView/QGraphicsScene, touch events are sent to
QGraphicsView's viewport() event handler, which then dispatches it to the
corresponding QGraphicsItem, if any. In the case of QGraphicsProxyWidget, we
need to forward these touch events to the encapsulated QWidget, otherwise it
will never receive them (i.e. the event chain for touch events terminates at
QGraphicsProxyWidget).
This also enables QWidgets associated with QGraphicsProxyWidget to grab
gestures.
Task-id: QTBUG-45737
Change-Id: Ia441d3576afb6c97376be6f2ff073901e6e928a5
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
It sends a shortcut override event directly, which should go
though QPA anyways.
Change-Id: Ie2c6f45cd44222cd9be8846099573dcd2968a77c
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
make sure it'll work with the new mouse handling as well.
Change-Id: Ia2d567e618b77b0fa3532ee6c335cbdf5e496241
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The failing test has been blacklisted in 3ed6f74fb2.
Change-Id: I5a2defd839e2f98690fc8cea9ff18e7503caf0de
Task-number: QTBUG-25294
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QGraphicsWidgetPrivate::init had a special code path for setting
the item's parent. For some reason that code path caused the
ItemChildAddedChange notification not to be sent to the parent
element, which is wrong. Instead use the "normal" path, which is
what the QGraphicsItem constructor does anyhow.
Change-Id: Iad84cae05d797022a45977d35ca00c80c17c306a
Task-number: QTBUG-45867
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The test tst_QGraphicsIten::sorting is blacklisted but always passing.
Change-Id: I69bbd4b4bbe227267e16ab5558ddabe7d2c0b1b3
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X 10.10. This test is currently failing in CI.
Change-Id: I1b3a33b404c915e83c5e4fa0a7af69d1b941d93c
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Disable top-level widget code path for embedded widget in the show
helper.
Task-number: QTBUG-43780
Change-Id: I574e07130e5e68a019a426cee3fde982f3883720
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
CppCat detected duplicate sub-expressions in the code that checked for
BottomLeftSection and BottomRightSection. It was fairly obvious to
see what the values should be.
Change-Id: Id45ca5bbd26c92b800c60867fef5170578216eee
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
If the user has some objects selected and holds down the "extend selection"
key (Control on Windows, Command on Mac OS X), clicking and dragging a
rubber band selection deselects the current selection. This is
counter-intuitive and confusing for users.
This commit fixes the behavior so users can extend selections using the
rubber band when the proper key is held down.
Task-number: QTBUG-6523
Change-Id: Ieda4aaa50adb351c0405f5cb8aae23332eec58a9
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The problem was that the span we stored in the multiCellMap was the
"effective" span (i.e. the given span subtracted with the number of
ignored rows it would span). Later we used that span to distribute its
size across all its cells. However, since the span now could be smaller
that the given span, we could sometimes fail to distribute to the last
span(s).
[ChangeLog][QtWidgets][layouts] Fixed a bug where spans sometimes didn't
distribute themselves to the last cells they covered.
Change-Id: I31db3d850484dc8b70d62c5f02f680740578c661
Task-number: QTBUG-43099
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Instead of sending the event from random places, send it from
QWindowSystemInterface. This allows to send override events on OS X to
menus before doing other key processing and reduces the number of
ShortcutOverride events on all platforms to exactly one per key press
event.
Additional test by Friedemann Kleint.
Task-number: QTBUG-38986
Change-Id: I6981bb776aba586ebc7c3daa5fd7a0d84c25bc3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Removing and adding toplevel items could result in invalid stacking
order (not corresponding to insertion order).
Task-number: QTBUG-19316
Change-Id: Ia8646784a2181cfa936b101e2adaf7e7e73bb83d
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Selection rectangle was incorrectly mapped to scene space when the
view was rotated. It became a rotated rectangle instead of the correct
polygon (rhombus).
Task-number: QTBUG-42008
Change-Id: Ib7b366bec7e1f83109e03c434268ad6897138f30
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since layout items can now be hidden, this also makes sure we respect
the QSizePolicy::retainSizeWhenHidden
Task-number: QTBUG-20132
Change-Id: Iab59fc9b61d4ca1bb2208c479a027da6eb0283a9
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Map the positions via QGraphicsScene and the first QGraphicsView
(as is done in existing code). Fall back to the previous code
path when no QGraphicsView exists, which is hit in the tests.
Change-Id: I0754765d05cded6bc1b64045f2513fef8afde337
Task-number: QTBUG-41135
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QTRY_COMPARE instead of hard-coded timeouts, ensure window is
shown.
Change-Id: I4f23144ee14150c4fba9c6fbd8c4ee2da472cc75
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
On BlackBerry first window is always shown full screen. However, many
tests rely on a specific window size. A dummy full screen window is
created so subsequent windows have correct size.
Change-Id: Id8bd0212b6eca677953e78505459e3cd69bc6328
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The new flag ItemContainsChildrenInShape is similar to the existing
flag ItemClipsChildrenToShape. Setting the new flag makes QGraphicsScene
assume that children are drawn within the shape of the current item
but this is not enforced by clipping. When an application manually
ensures this clipping boundary, setting the new flag removes the
overhead of enforcing the clip with ItemClipsChildrenToShape, while
still allowing other routines to behave more optimially by assuming
children are within the shape of the current item.
[ChangeLog][QtWidgets][QGraphicsItem] Added the
ItemContainsChildrenInShape flag that enables using optimizations
of ItemClipsChildrenToShape without the overhead of enforcing the clip.
Change-Id: I5496fe1ca331b77fd51e0df8a3ace2b8e939eaf2
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the test widget to use a non-single-shot timer
to hide the menu once it has become visible.
The test shows hangs on Windows 8.1 CI nodes.
Task-number: QTBUG-37822
Change-Id: I8fc782e53256616119920aef714f89f25863b39f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The minimumRenderSize is a qreal value that is used as a lower bound to
determine what items are visible when a scene is rendered. If an item's
view-transformed width or height are less than minimumRenderSize then
this item is considered to insignificantly affect the final result and
is not drawn. If the item clips its children to its shape they are
automatically not drawn. This greatly reduces the drawing overhead
for scenes with many items rendered in a zoomed out view.
[ChangeLog][QtWidgets][QGraphicsScene] Added the minimumRenderSize
property which can be used to speed up rendering by not painting
items, smaller than a give size.
Change-Id: Ie208234707dffb4d2fc620fc5d1514e0c144d9a8
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Seen on Windows:
XPASS : tst_QGraphicsAnchorLayout::stability() QCOMPARE(sameAsPreviousArrangement, true) returned TRUE unexpectedly.
tst_qgraphicsanchorlayout.cpp(1399) : failure location
Move check into loop with descriptive message on fail, do not error
out if it actually passes. This now typically prints:
XFAIL : tst_QGraphicsAnchorLayout::stability() The layout has several solutions, but which solution it picks is not stable ( QRectF(30,0 0x10) != QRectF(30,0 10x10) , iteration 3 , item 4 )
Change-Id: Iae8553dbbcedeb70d5d672e3cefbd1f06a63d27d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The abstractions are needed so that they can work with both
QGraphicsLayouts and QtQuick.Layouts.
Since the plan is to move the engine to QtGui, this means that the
engine cannot have any references to anything in the QtWidgets module.
As a consequence of that several things had to be done:
* The style info object had to be redone with an abstraction layer
to get rid of style and widget dependency. (Abstract class is
called QAbstractLayoutStyleInfo)
* QGridLayoutEngine must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngine.
* QGridLayoutItem must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngineItem.
Did also some minor cleanups, reordered arguments so that all styleInfo
arguments are last in all function calls
This also fixes QTBUG-35099 (bug was spotted during this refactoring)
Task-number: QTBUG-35099
Change-Id: If49d40f71870dc8d99d2e145be158e3080b595fa
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The cursor() test was missing a QTest::moveMouse() before sending of the
mouse event (as all the following subtests do). When run on a desktop with
the panel on the left side of the screen, the mouse pointer would land over
the left item instead of in between them, as assumed by the subtest, and
the following QCOMPARE failed.
Change-Id: Ib74fdf0cfbfbc8ecb79a906610a2da5cb50c89d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The test is randomly failing on CI when ran on 10.7.
Task-number: QTBUG-31454
Change-Id: I79fce9a37616c6abaee960e338f8eea8fe6f31cf
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Do the same as in mousePressEvent.
Otherwise it is not possible to handle the event
in one of the graphics views parents.
Task-number: QTBUG-8061
Change-Id: I67c7635361a9ed595c513c28ea016e6253fa2101
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Previously, the topmost untransformable's scene transform, which
includes the item's position and local transformation, was used to
determine the item's anchoring position. This position was then
passed on to be multiplied by the item's transform again. This
works fine for toplevel untransformable items that don't have any
transform set at all, but those who do would have their transforms
applied twice - one to determine the anchoring position, and again
to transform the item itself. Since only translation transformations
can affect the first operation (the anchoring pos), this bug only
applies to items that set ItemIgnoresTransformations and use a
local transform that includes translation.
Task-number: QTBUG-21618
Change-Id: I772d52d59dfd9f242d0140632a87e9c68dfe0ea1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Currently, calling
QGraphicsScene::items(QPointF(0, 0), Qt::IntersectsItemBoundingRect) or
QGraphicsScene::items(QPointF(0, 0), Qt::ContainsItemBoundingRect)
will exclude items whose shape does not contain QPointF(0, 0). This is
because QGraphicsSceneIndexPointIntersector::intersect() also checks if
the point is contained within the shape, instead of just checking
if it is contained within the bounding rect.
Task-number: QTBUG-19036
Change-Id: Ie701af2a5694d40cf9b3c9c19adbb09a53a4e398
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The test now passes on Ubuntu, Lucid, too.
Task-number: QTBUG-20778
Change-Id: Id7ddc4b34d03f8fb9af977c0f40615d544934f13
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
If no stretch factors were specified, we used the preferred size as a
stretch factor. Obviously, that didn't work if the preferred size was
actually 0.
This patch works around this by actually setting the stretch factor to
1.0 if this is the case.
This should work fine in most cases, except for the case where there
are also other items with a preferred size close to 0.
In this case, the item with preferred size 0 will just grow
faster than an item with e.g. preferred size 0.1.
Task-number: QTBUG-31217
Change-Id: I966455da0bdd00308591c7f7cfbc4e134d423e57
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The test showed frequent failures with XCB in
initialShow2() (line 3200) after
01bc34088e (QTBUG-30923) which
can be fixed by ensuring the widget from the HFW-test is deleted.
Use QScopedPointer to ensure widgets are always deleted in case
of test failures, too.
Task-number: QTBUG-20778
Task-number: QTBUG-30923
Change-Id: I2af7737b604820463f760d6b6787dd5a5a93d602
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
If tabFocusFirst is not cleared or set to another valid item,
there will be crash later if the removed item is deleted after
removal.
Task-number: QTBUG-30923
Change-Id: Iba9a6ce9334c52f8e552b0accda95ebb5fcfcdb1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
logicalDotsPerInchX returns qreal, and qreal in WEC7 is defined to
float instead double. There is no required overload:
qFuzzyCompare(float,double)
And for that reason build fails. Ensure qreal is casted to double which
is default type used by compilers for floating point literals such as
'96.0'.
Change-Id: I24c701715b3dcf1a2137256a1c251c19d0c1dbe9
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
This was spotted while tracking down a similar bug related to spans.
This now also eliminates the Q_EXPECT_FAILs in
heightForWidthWithSpanning(), since it now finally works.
The problem was only for the maximum size, since the size of an ignored
row/column was min: 0, pref: 0, max: FLT_MAX (the default constructed
values for a QGridLayoutBox).
Change-Id: Ibb33c26ede40ed02edd26f596ba6133d59c9962f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
If a row/column is only used only because of the spanning of an item,
the cell should be treated as it didn't exist. We keep track of this
with the "ignore" bit array.
The old code would always start from the row/column at position 1.
In the attached testcase this made the effectiveRowSpan become larger
than actually needed.
Task-number: QTBUG-30255
Change-Id: Ief0e7018ee8e5ee36272ce075a43312ffeac7b91
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A glitch in QGraphicsItem's logic made it update the focusScopeItem
pointer, but fail to notify the change to QDeclarativeItem through the
d_ptr->focusScopeItemChange() virtual function, hindering
QDeclarativeItem from emitting focusChanged() correctly for focus
scopes that do not have focus.
Two lines were moved, and a comment updated to reflect the reason
why the "return" is needed at this point. It's clear that the
calls to focusScopeItemChange() are unrelated to the return.
Task-number: QTBUG-29260
Change-Id: I12ba9161b16d34c3689401a92c86d2047989f7bd
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Alan Alpert <aalpert@rim.com>
Instead of testing the "windows" and "motif" styles, that test should
actually test the scrollBarRanges for all available styles. To be able
to do that, the magic numbers 16 (width/height of scrollbars) and 4
(spacing for the faux motif style) were replaced and instead of setting
the explicit values in the data the "number of scrollbars/spacings to
add/remove" is saved in a struct and the value of these (depending
on the style) is obtained in the test run.
This change does not also cause the fusion style to also be tested but
also fixes this test for Windows 7 and 8 (Aero) where the scrollbar
width/height is not 16 but 17.
Task-number: QTBUG-28611
Task-number: QTBUG-29002
Change-Id: I5d103018fde81cee6e6e89cd414426768b2dc8e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
QGraphicsItem::setActive() is by design not guarded against calls that
do not change the current activation state of the item (e.g., calling
setActive(true) on an active item or calling setActive(false) on an
inactive item). This is to ensure that it's possible to set explicit
activation state on items, either before they are added to a scene, or
while the scene itself is inactive.
Before this fix, calling setActive(false) on a panel item that is not
currently active would by accident clear activation from any other
panel that might have focus. After this fix, activation is only cleared
if the item setActive() was called on itself is the active panel, or
is the panel that will regain activation once the scene is reactivated.
Task-number: QTBUG-28544
Change-Id: Ic4752f1e4400f9a0660bc968834747610212bb52
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
This signal is emitted by QGraphicsScene whenever focus changes in the
scene (i.e., when an item gains or loses input focus, or when focus
passes from one item to another). You can connect to this signal if you
need to keep track of when other items gain input focus. It is
particularily useful for implementing virtual keyboards, input methods,
and cursor items.
Task-number: QTBUG-10570
Change-Id: I9cbbd9a2d15d6f568e1597c2c33ec049eb70f793
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Makes tst_qgraphicsitem::tst_focusProxyDeletion not crash.
valgrind reported the error when running tst_qgraphicsitem. The crash
was very real; when deleting an item that has another item as a focus
proxy, the proxy still had a reference to the deleted item's focusProxy
pointer. I'm not a huge fan of whitebox testing but thought this crash
justifies a modification of the test to make it fail, instead of just
passing silently with a warning only given by valgrind and friends.
FTR the reason the test doesn't crash hard is that the memory is freed
but not reused within the scope of the test. So the access to the
pointer d_ptr->focusProxy succeeds, it just accesses memory that might
as well have been reclaimed. But this is quite undefined...
Task-number: QTBUG-28321
Change-Id: I2624631f5e5c2a8aa8bd4efe1fc128eba6c61f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This changes behavior, but I would argue it's a good change. If you
create a panel and activate it (e.g., by simply showing it or reparenting
it onto an already-visible item), you expect the panel to gain focus /
which is sort of the whole point of activating it. Prior to this change,
you had to have explicitly called setFocus() on one of the panel's
children, which would give that item subfocus, for that item to auto-
gain focus when the panel was activated. This change makes it more
automatic. If the panel itself or any of the widgets in its focus chain
can gain focus, they will gain focus when the panel is activated.
So the new logic is - if the panel already has a focus item, so if
someone explicitly set subfocus on an item before the panel is shown,
that item gets focus. Otherwise, if the panel itself can gain focus
(e.g., someone makes a line edit / text edit panel), it gains focus
when activated. Otherwise, we search the focus chain until we find
the first item that can gain focus. This last case is the file dialog
case, where the dialog itself can't gain focus but typically the
first item in the focus chain is the primary focus widget, such as
the search field or the directory list view.
The change also fixes this for the first Tab. If you clear focus on
a panel, the user expects to be able to press Tab to regain focus.
Prior to this change that didn't happen. Now, the panel or the first
in the focus chain that can get focus gets focus on first tab.
Task-number: QTBUG-28194
Change-Id: Id7ec1741d0d5eb4ea845469909c8d684e14017f1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Add handling of the focus chain to QGraphicsItem::setFlags(), so that
the focus chain is repaired (panels pop out of the chain and non-panels
merge back in) when the ItemIsPanel flag is toggled. Add handling focus
chain to QGraphicsWidgetPrivate::fixFocusChainBeforeReparenting for
panels.
Before this fix, you must enable the ItemIsPanel flag before adding
the item as a child to a parent panel, and you lose focus when using
the tab key to focus around a panel after it has been reparented into
another panel.
Task-number: QTBUG-28187
Change-Id: I1d0d81a90697eaf715a8a337c8bf6c2159329e68
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A focus scope has effective focus if one of its children is the focus item,
clearFocus() should remove effective focus from an item and its children
not just from the focus item.
Task-number: QTBUG-28328
Change-Id: I62a292eff000151e50b2f5221e22f326a380fc3a
Reviewed-by: Martin Jones <martin.jones@jollamobile.com>
When hiding any widget that is not a panel, it is correct to clear
subfocus. In case clearFocus() has been called, the result is that
focusItem() / focusWidget() points to 0, which is correct. Upon
reactivation, nothing gains input focus. When changing focus, the
following setSubFocus() call will ensure subfocus points to the new
widget.
When hiding a panel, however, it's essential that subfocus within
that panel is not cleared, otherwise, when re-showing the panel,
nothing will have focus, whereas the expected behavior is that focus
is restored to the last item that had focus, i.e., the focusItem()
a.k.a. subfocus widget.
Task-number: QTBUG-22256
Change-Id: I84d849a505764e074e1369fef923cef1ad5c0b1e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QMacStyle directly.
Change-Id: I44a2f5ee3fe08ecc837b593a2a2737eb90e8c267
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QFusionStyle directly.
Change-Id: I37d8acb13b6fd328a9cd53c74df971428bbbe443
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As QWidget initializes any painter created in paintevent handler to
have the pen color of the palette's foreground, setting it to 0 width,
i.e. cosmetic, it negated the effect of the recent change to default
1-width non-cosmetic, ref. I04d910e9700baf7f13a8aac07a3633014bb9283e
This caused scaled painting with default pen on QImage and QWidget
to yield different results.
Change-Id: I930b64bf7c0a8c84b9ea3edb49adc813370fed0e
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Use QStyleHints::showIsFullScreen() where necessary.
Notice that QWidget::show() already calls showFullScreen()
if appropriate, and Qt::X11BypassWindowManagerHint doesn't
do anything in the XCB platform plugin.
Change-Id: Ib8f61188c075170d646894388561cbb3f72daee8
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This reverts commit 6b5bbc531b.
Autograbbing mouse shouldn't be done in crossplatform code, as
X11 does this automatically. Windows needs platform specific
solution.
Task-number: QTBUG-26962
Task-number: QTBUG-27039
Task-number: QTBUG-23699
Change-Id: I911df92c4a34deb50b729f50681497046657948b
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QStyle::standardIconImplementation() & layoutSpacingImplementation()
are removed, and standardIcon() & layoutSpacing() made pure virtual.
Change-Id: If8ab6cfef0b639b7973be22dd630ba3e6f39a225
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
When calculating the maximum height / width which a QGraphicsView can display,
make sure we only take the scrollbars' dimensions into account if their policy
is set to Qt::ScrollBarAsNeeded:
- if the policy is set to Qt::ScrollBarAlwaysOff, the scrollbar will not be
displayed at all
- if the policy is set to Qt::ScrollBarAlwaysOn, the scrollbar's dimensions
have already been substracted from the available space by
QAbstractScrollArea::maximumViewportSize()
Task-number: QTBUG-14711
Change-Id: If5d24b41dbe7b089abca2bf61ccbd370d4de79a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This test is doing a brute-force mapping. Coupled with changes to
QCOMPARE last year, this now allocates and deallocates a lot of memory
per iteration. On my Sandybridge, it takes two minutes to run:
111136.781153 task-clock # 0.999 CPUs utilized
371,692,633,238 cycles # 3.344 GHz
182,641,818,708 stalled-cycles-frontend # 49.14% frontend cycles idle
57,951,552,830 stalled-cycles-backend # 15.59% backend cycles idle
477,216,332,971 instructions # 1.28 insns per cycle
# 0.38 stalled cycles per insn
86,959,637,669 branches # 782.456 M/sec
309,185,237 branch-misses # 0.36% of all branches
111.264868818 seconds time elapsed
Changing the iteration step from 1 to 5 reduces the runtime to about 5
seconds.
Change-Id: I9cad6f85f535f472319da7cd6c4aa28e12ddf1b7
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has recently timed out in CI, but appeared to be making
progress. Give it more time to complete.
Change-Id: Ied0fb7aad35ed6d5889dd585a7545687617e5e19
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The argument has been obsoleted and not documented since 2007. Get rid
of it now before Qt 5.0
Task-number: QTBUG-25089
Change-Id: I91a5508a5e1606f5b5c289501295c67be4abe6a0
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
While the qWaitForWindowShown(QWidget *) is inherited
from Qt 4.8, the qWaitForWindowShown(QWindow *) was introduced
in Qt 5. As it is identical to qWaitForWindowExposed()
and removed already, it can be deprecated in Qt 5.
Remove its usages in qtbase.
Change-Id: I28788d120ad687a49f02b2b44de6b38a2832fe5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Deprecate qWaitForWindowShown for Qt 6 as it is just a wrapper.
Change-Id: I0f8195679679120bd402e273fed4d331dc926708
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Removed old defunct platform specific code from
QWidget::isActiveWindow() and added call to
QPlatformWindow::isActive() instead. This is done because
the embedded native windows inside QAxWidgets can have
focus but are not part of the parent application's Qt
window hierarchy, so native methods are required to determine
if they are part of the active window or not.
QWidgetPrivate::setFocus_sys() was implemented to activate
the window of the focused widget if the focus was elsewhere.
This is required because embedded native windows can steal the
focus from the main application window.
Focus event handling in Windows platform adaptation plugin was
fixed to correctly identify the active window in cases where
the are embedded native widgets that can have focus.
Also fixed three test cases that were affected by these changes.
Task-number: QTBUG-25852
Task-number: QTBUG-23699
Change-Id: I817e0ce4317e88955bb49b034eacd630a876ccf0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Similar to XCB.
Task-number: QTBUG-24299
Task-number: QTBUG-24296 (partially fixed)
Change-Id: I4c9d813d9645f957f2caad0c4e395ce0d3d222cc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Rename posFromMove to posIncludesFrame in Widgets and
make the handling more fine-grained; try to clean it up
as soon as the frame margins are known
in QWidgetPrivate::fixPosIncludesFrame().
- Implement QWidgetPrivate::updateFrameStrut().
- Windows: Handle posIncludesFrame in window creation,
notify changed geometry after setting window flags.
- XCB: Do not change the window gravity in propagateSizeHint()
as this causes the window to jump around. Determine
the gravity in window creation, leave it constant and
fix the geometry when setting instead.
- Store the normal geometry when maximize/fullscreen
state change events are received.
- Remove xfails from fixed tests
Task-number: QTBUG-25331
Task-number: QTBUG-24905
Task-number: QTBUG-24294
Change-Id: I89c7229d86aaf88f02247d63915da7905e4a27ea
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has been passing consistently since it started running in CI.
Task-number: QTBUG-24295
Change-Id: If2a163607ae72cae9e28619dd5de1b333aea4ed9
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Windows, the test had a stable failure and an XPASS related to an
already closed bug report. On Mac, the test had one stable failure, on
the same statement that had the XPASS on Windows. On Ubuntu, the test
has been passing consistently.
Mark the stable failures with QEXPECT_FAIL, remove the QEXPECT_FAIL that
causes the XPASS, and remove the insignificant_test markers to re-enable
the test.
Task-number: QTBUG-24296
Change-Id: I05dd16b39296919268fee216332929df591f2b66
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was marked insignficiant on Ubuntu 11.10, but the only failure
was an XPASS. Make the test significant again, and only include the
QEXPECT_FAIL for CI platforms where the test is known to fail, i.e.
Windows and Ubuntu 10.04.
Task-number: QTBUG-20778
Change-Id: I24af3dab45118758382ba03c8c7a310f16301f8c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has three stable failures on Windows. Mark those failures
with QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-24294
Change-Id: I9eee2701a228912c3a91fa730e712661fb93add6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The number of paint events is correct now, but the first expected region
is still incorrect. Move the XFAIL to the region comparison.
Change-Id: I3e706cf703b20a0e98b644b3082172fc3142b44f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Crash on XCB can no longer be reproduced.
Task-number: QTBUG-20756
Change-Id: I057231a397573f2a28a1325c6d6f728735ebbee6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
WA_PaintOutsidePaintEvent is only suggested to be used when porting Qt3 code
to Qt 4 under X11 platform. and it has been broken now.
Change-Id: Ie4297b2a449f1055ca10ada9efb930e6018b1efb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Feature to be reimplemented simplified. Cases when input method
needs to be reset with possibility to commit use
QInputMethod::commit() again.
Change-Id: Ibfe7aecc0799e7a76c7ac4f5d860971cfe6e97ca
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Since change 2e4d8f67a8 the need for Map and Unmap events has
gone away, as now the Expose event is used to notify the application
about when it can start rendering.
The Map and Unmap events weren't really used except by QWidget to set
the WA_Mapped flag, which we now set based on the expose / unexpose.
Also guarantee that a Resize event is always sent before the first
Expose, by re-introducing an asynchronous expose event handler. Since
an expose is required before rendering to a QWindow, show a warning if
QOpenGLContext::swapBuffers() or QBackingStore::flush() if called on a
window that has not received its first expose.
Change-Id: Ia6b609aa275d5b463b5011a96f2fd9bbe52e9bc4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Refactor NSWindow creation into createNSWindow and
setNSWindow. This is necessary to support QMacNativeWidget
where we re-use an already created window.
Implement popup window handling. Make sure the window
is displayed correctly and closes when it should.
Take control over window activation in order to prevent
infinite loops involving the QtCreator "cmd-k" window.
Activation events are for now not sent to popup-type
windows.
There is now a different set of test failures: add
and remove some QEXPECT_FAILs.
Change-Id: I229761b59f90c9815b968eacc2cbc9c20cc5047e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
QPointF is in the category of types for which QList
is needlessly inefficient (elements are copy-constructed
onto the heap and held through pointers). Use a vector
instead. This is consistent with the QPainter API.
Change-Id: Id0e910c067a60d12fbc175e7ee7da824834be374
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Introduce cursor() accessor to QPlatformScreen.
- Remove screen member of QPlatformCursor (a
cursor can be shared by multiple screens
of a virtual desktop).
- Add QCursor::pos()/ QCursor::setPos() taking
a QScreen-parameter, use primaryScreen() for
old overloads. QCursor::pos() can then query
the platform cursor for the position and return
the position even if the mouse position is outside
the windows owned by the Qt application.
- Fix tests
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Task-number: QTBUG-22457
Task-number: QTBUG-22565
Task-number: QTBUG-20753
Change-Id: Ia69f37343f95772e934eab1cd806bd54cbdbbe51
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The auto test may fail incorrectly depending on the width of the
QGraphicsView frame. To ensure more consistent test results, the frame is
disabled.
Change-Id: I8d70fb07e45803230954f776947d525e4cf9050f
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Causes a new test failure in QGraphicsProxyWidget::updateAndDelete,
expand the EXPECT_FAIL to cover that one as well.
Change-Id: If9da757206445d17510c4fac82a559de7b8c0563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The XFAILed initStyleOption() case passes on Windows, so do not XFAIL
it there.
Task-number: QTBUG-24297
Change-Id: I9615c408aa7e72b5eb8fe9739903594e45eb5fd7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ic958c4e5c15dd53a48479099b6b07803af6cb789
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>