Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It would crash if there is no screen at 0,0.
Change-Id: Ic84d75b3d8b917fe3696530cbe843e82923ba676
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Qt already has the widget attribute WA_StyleSheet to which indicates that
a widget was subject to a style sheet, but it doesn't indicate that the
widget was actually affected by the style sheet. For example, an application
style sheet will set the WA_StyleSheet attribute on all widgets, even if it
only targets QPushButtons. The WA_StyleSheetTarget new attribute pairs with
WA_StyleSheet to give this extra information.
[ChangeLog][QtWidgets] Added the Qt::WA_StyleSheetTarget attribute to
indicate that a widget was affected by a style sheet.
Change-Id: I7cca18ddec8fbb69f294ae2ef990672a5f4f1d83
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Verify that all pixels of the grabbed image are green instead
of comparing an image loaded from file.
The test then also passes when High DPI scaling is active in
which case a twice as big pixmap with DPR=2 is obtained when
grabbing the widget.
Change-Id: Ie5244a39a68ea0defd2590cf30f251d660d0869b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
macOS hasn't had SC_ScrollBarAddLine and SC_ScrollBarAddLine
since 10.7, when transient scrollbars first appeared.
We also make the warning message a bit more informative.
Change-Id: Idef4684162456d9bc274eea77908a6afe24fa0f5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Put all widgets in one dialog so that show/setActive occurs only once.
- Use the center of the widget geometry for positioning.
- Remove BypassWindowManagerHint which likely causes qWaitForWindowActive()
to fail.
- Move the cursor out of the way and subsequently send mouse events
to the QWindow
Task-number: QTBUG-51400
Change-Id: I2176d8dbaead72d7a6fa89aa769e4c804eea7a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
No need to have two enums for the exact same purpose.
qmacstyle auto-test updated as well.
Change-Id: Ia601648191e39c0cbbaa7477143441005ae063c2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This enforces decoupling and in the case of QMacStyle, isolates
QtWidgets and therefore end user applications, from Carbon/HITheme.
Windows and Fusion are platform independent, so they remain built-in
(but mostly because the Windows style is tightly coupled to other styles
like QStylesheetStyle).
Task-number: QTBUG-59428
Change-Id: Id6519fe0c5269c1bce5b5921f9db06257032a1c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Later, the Windows XP style will be removed entirely by means of
being merged with the Windows Vista style (which inherits from the
XP style).
There was actually no reason for these styles being separate
classes in the first place, because both result in the same
appearance for controls on the running version of Windows.
Therefore, the windowsxp style merely appears as a "broken"
version of the windowsvista style, with only minor differences
based on the additional metrics that the vista style provides.
The windowsxp style does NOT, and never did, allow users to get
a Windows XP style appearance on Windows 7 and above (which is
currently Qt's minimum supported platform). Therefore, now that
Qt no longer supports Windows XP, the windowsxp style is unusable.
[ChangeLog][QtWidgets] The windowsxp style is no longer available
as a separate style, because it did not (and cannot) actually
provide an XP-style appearance on currently supported Qt platforms.
Change-Id: I513d9bce3f247f97cfb28dfee88fe888469e0a6f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The usual:
- delete styles
Either by using QScopedPointer.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/widgets/styles.
Change-Id: Ifba59085c057d474bf964cbb93010c408d773a61
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The only difference between the sample widget sets was:
- widgets << new QLabel("TESTING TESTING");
+ widgets << new QLabel("<b>TESTING TESTING</b>");
I chose the latter, because it's the more complex example
and neither the hoverColors nor focusColors tests suggest
the boldness of the text matters.
Part of port away from Q_FOREACH.
Change-Id: I9a928de4e781b96ad00a8c9515977c35ebfa6c24
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Ensures that QStyleOption is correctly initialized.
This prevents possible styling issues due to
QStyleOption's reporting version 0, see qstyleoption_cast.
This enables users to handle more cases in their QProxyStyle.
For now the test is only used for QCommonStyle.
Change-Id: I768db00b12b46890343fffe44e4f562762e9cf80
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Its currently not possible to style the arrows with QCommonStyle because
drawPrimitive from QCommonStyle is called instead from the proxy.
Change-Id: I910b13df110601cb18578bc16edfa5ddaa17bbd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
By default when using Qt Style Sheets, a widget does not inherit its
font and palette from its parent widget. With the
Qt::AA_UseStyleSheetPropagationInWidgetStyles application attribute set,
propagation when using Qt Style Sheets behaves like it does with regular
QWidget::setPalette() and QWidget::setFont() calls.
[ChangeLog][QtWidgets] Added the
Qt::AA_UseStyleSheetPropagationInWidgetStyles attribute which enables
font and palette propagation for Qt Style Sheets.
Task-number: QTBUG-37580
Change-Id: I3038c13d61e32625a1a05291c5394eaefd376a68
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
With SHA1 47b3ecf3f4 some tests got
commented out by accident. This re-enables those tests.
Change-Id: If9c7d8a672b66086895a0383fe87d3101fb146fb
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
If the widget exists in the style rules cache before it polishes for the
first time then it should be removed from styleSheetCache too so that the
latest set stylesheet is used for the polishing.
Task-number: QTBUG-39427
Change-Id: Ic1e7988afe530f16ea9996bae56543ed554d6be9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use the correct palette and enforce Fusion style to prevent
the Vista style from clobbering the tooltip palette in polish().
Task-number: QTBUG-38183
Change-Id: Id19d548f818d801c4914a343e08207195c343888
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This test doesn't fail on Mac any more.
This reverts commit 36493a7a41.
Task-number: QTBUG-23685
Change-Id: Ib7c56494b07de9839b3287758fe228f799bc343c
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The pseudoclass array is declared with length "NumPseudos - 1",
but the declaration has actually 44 elements, not 45.
This caused a zero-initialized last element to be silently appended
to the array. The zero-initialized element broke the sorting
of the array, which in turn broke std::lower_bound usage
(although of course the problem was there from before switching
to the standard library algorithms).
Task-number: QTBUG-36933
Change-Id: I8a02891fc36761b6ae72d15a0a8d6c6a96813947
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Update the test code to match the current Qt idiom for finding test data (and
fix it on QNX).
Change-Id: I63e7c97b717722e4e6859a12f329d56b26584ce6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Apparently testAllFunctions method has been changed to take pointer,
but code inside different WinCE defines was not updated.
Change-Id: Id15380ecc1e85650d679cb7437923ff9c77057ae
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The QStyle implementations are becoming private, so the following
slightly verbose pattern seems to be now repeated a lot:
new QProxyStyle(QStyleFactory::create("windows"))
This change adds an alternative, more convenient constructor for
this particular use case:
new QProxyStyle("windows")
Change-Id: I97ded597a0fd3225a6354ebea0abb367237430af
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Increase tolerance on Windows for the Aero style.
Set small top level widgets frameless to avoid warnings
about minimum size of decorated windows on Windows.
Task-number: QTBUG-28611
Change-Id: Ia4aec0cf0763da9955577054cb8cf81337fac134
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QMacStyle directly.
Change-Id: I44a2f5ee3fe08ecc837b593a2a2737eb90e8c267
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsMobileStyle directly.
Change-Id: Id64f3dabff38db7864e235c79b2e9276379f4ba4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsCEStyle directly.
Change-Id: I6b3c0554e7a2a4a5f0027f4ea1342fd332af89ad
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy and even merging style
implementations (XP & Vista) later on, without worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsXPStyle directly.
Change-Id: Ib4fec35c2fcb3b5a193537a1de5b6e26fbbe0a06
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy and even merging style
implementations (XP & Vista) later on, without worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QWindowsVistaStyle directly.
Change-Id: I8b320036e241e877fc9bb5f4084cc6e63756cbc4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
We will take this opportynity to remove various QStyle specializations
from the public API in Qt5. This gives us much more freedom, for
example changing the inheritance hierarchy, pluginizing etc. without
worrying about BC.
=> Use QStyleFactory and/or QProxyStyle instead of creating an instance
or inheriting QFusionStyle directly.
Change-Id: I37d8acb13b6fd328a9cd53c74df971428bbbe443
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Adding QCheckBox, QComboBox, QLineEdit etc. into an HBox layout or grid
layout makes the layout look like a snake's trail. Fixed the positioning
of these widgets to make the layouts visually more appealing.
Updated qmacstyle auto-test accordingly.
Task-number: QTBUG-13635
Ammended-by: Gabriel de Dietrich
Change-Id: I89461f9aad68ea8488070ed06257b9b8e7f493c5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The style hint SH_ScrollView_FrameOnlyAroundContents was currently
being ignored by QAbstractScrollArea. This looks like an accidental
regression following 10c6f015f4.
This code path does not execute on mac so it should have no impact
on that patch.
Change-Id: I78ca0a6b87dfdd7d426acbb3ef49480390211af2
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QStyle::standardIconImplementation() & layoutSpacingImplementation()
are removed, and standardIcon() & layoutSpacing() made pure virtual.
Change-Id: If8ab6cfef0b639b7973be22dd630ba3e6f39a225
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
