This simple patch was an unfortunate victim of the Gitorious to
Gerrit transition. (https://qt.gitorious.org/qt/qt/merge_requests/1179)
As noted in the Gitorious review, a small bug in readHeader is also fixed: ||
instead of &&.
Done-with: Pali Rohár
Task-number: QTBUG-12684
Change-Id: I1fe16359b9b68c10e518904c6a5c58b00fb7379b
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Its purpose in life will be to describe pixel formats
[ChangeLog][QtGui] Added QPixelFormat class
Change-Id: I74d8f974606520efb3935110ff3d6ddb5ea805a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The QDataStream version with which QPicture was previously serialized
with was hard-coded to 11 (Qt 4.5). This prevents features of
serializable types used by QPicture from being serialized if they
were added after Qt 4.5; namely features of QFont like
HintingPreference.
[ChangeLog][QtGui][QPicture] QPicture now serializes its data properly
by also accounting for QDataStream versions greater than Qt 4.5.
Task-number: QTBUG-20578
Change-Id: Idd27682b187f4d4a3695c52bbf68e84853c024a8
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The calculation of the width/height required for the
scaling algorithm was prone to floating point rounding
issues, where the lower value got rounded down, the higher
one rounded up. This could lead to a situation where we
iterated over one more line/pixel in the line than we have
in the source image.
Correct this by passing the dimension of the source image into
the function and bounds checking the values before iterating.
Task-number: QTBUG-35927
Change-Id: If44b2235a479224660d508a0504fec40d724763a
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Currently QImage::pixel() returns the raw underlying pixel values for
RGB32. For all other pixel formats the returned value is either valid
ARGB32 or ARGB32PM.
This patch masks the undefined alpha field in RGB32 so that the return
value is well defined QRgb. It also fixes one test that relied on the
previous behavior.
Change-Id: If37463528268b7419733499d1f7bfd0d1097d21e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Currently INV_PREMUL rounds strictly down. While PREMUL rounds evenly.
This patch adds 0x8000 to the intermediate results in INV_PREMUL before
right shifting, thereby achieving even rounding.
The rounding also makes PREMUL(INV_PREMUL()) into an identify operation,
which means we can safely convert ARGB32PM to ARGB32 and back without
ever losing color details. A test is added to verify this.
Change-Id: I1267e109caddcff0c01d726cb5c1c1e9fa5f7996
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Add ref qualified versions of QImage::convertToFormat, so that a
temporary QImage can be converted in-place to a format of equal depth.
[ChangeLog][QtGui][QImage]Added rvalue qualified convertToFormat method
for in-place conversion
Change-Id: I2eed5ffd63f5aea4ffa1147bf7607b02a49d9c5d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds inplace version of QImage::rgbSwapped() and QImage::mirrored() that
can be used on temporary QImage objects when supported by the compiler.
[ChangeLog][QtGui][QImage]Rvalue qualified mirrored and rgbSwapped methods for inline conversions
Change-Id: I4ffb658bf620dfc472d9db14c1aa70291c1fd842
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Support the byte-ordered RGBA format which is used by OpenGL, and many
endian neutral byte formats.
Task-number: QTBUG-32201
Change-Id: I77cffb4c30c69545fa96ded2f537b2ebd9351acb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Copy some needed files into a local folder when QtWidgets is not
available.
Task-number: QTBUG-31993
Change-Id: I93b65bda198c22a60e979c119de8de683a78bb53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The winapi call used to load the icon does not
support the arguments on windows ce
Change-Id: Ia600eb9b05d5eb40778d8c281e6ce8278bfd7177
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
QImage is supposed to maintain the invariant that each scan-line begins
on a 4-byte boundary, so we need to verify that this is the case before
using the optimized path of short-cutting QImage::copy() by referencing
the source image's bits directly.
Task-number: QTBUG-14766
Change-Id: I0a178aeb2f34cc64f98deae9470b55b5c53fcb06
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Introduces the methods QImageReader::supportedMimeTypes and
QImageWriter::supportedMimeTypes which corresponds to the similar
supportedImageFormats methods, except they return lists of MIME types.
Task-number: QTBUG-28177
Change-Id: Ibb0e264a12eaf972a8bfd6bd891dcd9f89efd085
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is done to support texture uploads in an image provider. It ensures
we can load the texture using QImage in the image provider, and when
it is later painted as a pixmap, the cacheKey will be identical
(assuming no format conversion was required).
Change-Id: I54229511ed91ce5430cc478af5aff0d96685a2da
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A pointer to the data of one qimage is used, with an offset, in a copy.
In the mono case, that could lead to overflow: the last row would
of the copy would stretch 1 byte beyond the end of the allocated
area. Fix by reducing the height of the copy, so that it keeps
within the allocated memory.
Task-number: QTBUG-28322
Change-Id: I09abfc83f738f8af000fc50f8c94f63dba3a6cfe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
For the special transparent color index, the decoder would skip
writing anything out (thus leaving the pixels at 0 rgba value).
Although correct for later frames, for the initial frame this would
loose the color information for such pixels (which one otherwise
could have made visible e.g. by converting then image to an
alpha-less image format).
Change-Id: I316cefce8f21797feedebfbf98296ad84eaa4b99
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from qt/c309d424f45dc0e7b62fbbbabf20dbfe355f48a7)
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This guarantees one will never get `!img.isNull()` after
load()/loadFromData() has failed, even if the image was
not null before.
Apply the same fix to QPixmap and QPicture.
Change-Id: Ida1ad6a6f0fc830df8e75ada0c163fc2d3360dea
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The icon engine behind icons that are loaded from QIcon::fromTheme does
not scale any pixmaps that it returns. When using an icon theme with an
incomplete set of icons (for example, only a "128x128" folder),
QIcon::pixmap will always return 128x128 pixmaps even if you ask for
one of size 22x22.
This is contrary to the QIcon::pixmap documentation that says "The
pixmap might be smaller than requested, but never larger."
This patch uses the same code that is in the main QIcon class in the
PixmapEntry QIconLoaderEngineEntry to scale pixmaps if they are too big.
Change-Id: Ic25a3628ac82cfb899574245f658490a2dd49d54
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
