Use CMAKE_STAGING_PREFIX instead of CMAKE_INSTALL_PREFIX when
cross-compiling. This separates the host path used in staging
prefix and the target path used in the install prefix for the
device. This prevents for example Windows paths from being used
in a device that does not support those. It also tells qmake
not to sysrootify paths when building with it.
Embedded linux and QNX builds are mostly affected and need this
to use correct RPATHs and to unsysrootify qmake. Mobile platforms
(Android and iOS) are not affected since they package binaries
separately. WASM and INTEGRITY are static builds and device paths
are not used.
Cross-compiled auto tests keep staging prefix in RPATHs due to
the behavior implemented in commit 20292250d4
which keeps the QEMU test runs working as before.
Pick-to: 6.3 6.2
Change-Id: If464ccd8cd9318a853df9afcb2aa709fbb2c1837
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As a drive-by this fixes the qtbase build to also have the
CMAKE_AUTOGEN_VERBOSE option set.
Pick-to: 6.2 6.3
Change-Id: I32324fb1e8e16299c5f34517edbc7ff335d84e14
Reviewed-by: Toni Saario <toni.saario@qt.io>
It had been noticed that sometimes the Android emulator in our CI took
several minutes to fully boot. It turns out that this behavior can be
reproduced locally by removing the image files under $HOME/.android
especially the "userdata-qemu.img.qcow2" file.
Then the emulator goes through several reboots until fully booted with a
full set of packages installed. We discovered that the property that
signifies it is finished is dev.bootcomplete=1. So we now check for this
flag and remove the other heuristics we had.
We also disable the debug output to avoid hundreds lines of
logs. Instead we selectively print the values that the emulator returns,
every second until full boot is detected.
We increase the Coin timeout for the shell script, from 5min to 10min,
since it has been measured that it takes about 2.5min on a good day, and
the script itself retries several times to restart the emulator in case
of failure.
Finally we adjust the coding style a bit to be more consistent.
Pick-to: 6.3 6.2
Fixes: QTQAINFRA-4681
Change-Id: I77062dceb91477e957696c89bfacb4ebabc34c1f
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Script that wraps Qt test execution in order to iron-out flakiness.
Task-number: QTBUG-96353
Change-Id: Ie8ee780e3f4f8d086c080a7784f9f68fd1867be2
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Was likely an oversight.
Amends 9f559699cc
Pick-to: 6.2 6.3
Change-Id: I13c2e4cc32e68c1ce98f59a932e3448250b0679b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Hostname is already set in options file, lets use that instead of
setting it again manually.
Task-number: QTBUG-99168
Pick-to: 6.2 6.3
Change-Id: I31c42a597ff45a94a2e36aa6f5002d171ad448ee
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Currently only qtbase is being run Qt autotests
Task-number: QTBUG-99168
Pick-to: 6.2 6.3
Change-Id: Ib9678c937c91946f07b78f8141df4837fa5d4111
Reviewed-by: Toni Saario <toni.saario@qt.io>
- there is no possibilities for running autotests on CI
Pick-to: 6.2
Change-Id: I15f0c600172ec4962edf3716a651483982c4f8c6
Reviewed-by: Toni Saario <toni.saario@qt.io>
Bic tests do not work due to bic tests being broken.
A feature enables easier testing of the bic tests.
Change-Id: I15b400ee8f0f877ac2c6c71fc50d51c5e11b330d
(cherry picked from commit 31910cbc09ff219b332aac94afe78c99d34274b3)
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
MSVC2022_PREVIEW can be removed later when MSVC2022 official
release has been merged
Task-number: QTQAINFRA-4540
Pick-to: 6.2
Change-Id: I7756b53b1cd5863d21c1c1e3bb19373f6f0cf8fa
Reviewed-by: Ville-Pekka Karhu <ville-pekka.karhu@qt.io>
Reviewed-by: Toni Saario <toni.saario@qt.io>
The actual module build is done in-tree and after this attempting
to do shadow build of the dirty source directory causes issues in
some modules.
Pick-to: 6.2
Change-Id: I74bca186b238c5c1f10576b4f821efdf66b827ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allows us to remove redundant information in the platform configs.
Pick-to: 6.2 5.15
Change-Id: Id0c09ce6f22f3bd52ef426c14a1b2806559b2321
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Script used to parse env variables and run test over ssh on qemu
* Script to start qnx qemu
* Script used to set env variables for ssh so they are correct in qemu
* Add b2qt sdk host toolchain to path for actual qemu binaries
Task-number: QTBUG-87628
Pick-to: 6.2
Change-Id: I951172211c2963654899491568771310a410e616
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
A single configuration provides qdoc and qtattributionsscanner via
provisioning. The environment variables instruct QDoc to run in
testing mode; it ignores linking warnings (since we don't have .index
files for external documentation modules) and terminates with non-zero
exit code if documentation warnings exceed the limit set in the
documentation config.
The provisioned binaries are portable, packaged together with their
dependencies. As they are installed under /opt, the instructions
create symlinks to the binaries in the install directory before
building the 'generate_docs' target.
Pick-to: 6.2
Task-number: QTBUG-78069
Fixes: QTBUG-95554
Change-Id: I4a4765250247e2fc6eddd153c36cf8126ddd10ae
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
When official version is available variableValue path need to be
changed.
Task-number: QTQAINFRA-4540
Change-Id: Ie5fe676962297aa5f18f225eb4b8dfe0957671c8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This reverts commit c7ddaa9f58.
Reason for revert: Broke integrations
Change-Id: I21ffb3b16e361a48a5d9b7a528d150e51519623c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The JUnit format is easier to feed to tools that don't support
the native Qt Test XML format.
Pick-to: 6.2
Change-Id: Iad677b98953275fd70765acb039f1fb3d0f44dab
Reviewed-by: Simo Fält <simo.falt@qt.io>
Enable building and uploading test artefacts for all modules in case
tests are enabled.
Pick-to: 6.2
Task-number: QTBUG-88846
Change-Id: I30832820dea348187b517e170fa1c5266db85604
Reviewed-by: Toni Saario <toni.saario@qt.io>
Add infrastructure to build cmake auto tests in the CI when targeting
iOS.
Currently the are only CI instructions for qtbase.
More work is needed to make it work for other repos.
With this change, we will build a single Widgets application targeting
the iOS simulator. We can't target the device SDK in the CI because
signing fails due to a missing signing certificate and provisioning
profile.
The Coin instructions will now set a QT_BUILD_ENVIRONMENT=ci env var
whose value will be checked in _qt_internal_test_expect_pass, to
ensure we build for the simulator SDK when using a universal Qt.
Without this, xcodebuild will try to build with the device SDK and
fail to build the project.
Pick-to: 6.2
Task-number: QTBUG-95839
Change-Id: Ib39c9527b107b2004746ccbdc9d9d1d658f88c76
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Change-Id: I22617a5f7b8971eae679058feaf41ba811e0a3dd
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change adds coin_ctest_runner.py which is used to pass test arguments
for testcase. Results are stored to xml files, which are then parsed by
COIN. Data that we are interested in, is injected to influx db.
Task-number: COIN-643
Change-Id: Ib1c99fc8aacc6a6b5863d282f3435fe1cfdcd013
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If these values already exist do not add them to configure. This also
allows setting these values from platform configurations
Change-Id: I2f2aea90d91fa3436953e0c4103f0ea204b3564b
Reviewed-by: Toni Saario <toni.saario@qt.io>
The Android test VMs take almost the same amount of time of that set to
the test timeout, this is causing it to be killed by COIN in some cases.
This is for example a stat from a successful test instance:
Total Test time (real) = 7110.20 sec
It's very close to 7200 which is the timeout value. The VM is taking
that long because the tests are only half built, the projects' shared
libs are built during the Build step of the integration, and the actual
apk (Gradle build) is done later when doing a ninja tst_name_check.
This latter behavior should be changed so that the apks are built before
going to testing.
So it makes sense for now to increase the timeout and avoid having to
restage multiple times.
Task-number: QTBUG-94127
Change-Id: I31783bcc1255c7821134e174ab6b0fb199000272
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
This allows modules to set custom timeouts for the builds.
Works by modules setting the CMAKE_BUILD_TIMEOUT and
CMAKE_BUILD_OUTPUT_TIMEOUT in the module's module_config.
Change-Id: I6f0170d77e9a962fb37e171d1c0d8c7b2277bb96
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rather than using multiple layers of negation, we can just specify a
list of allowed configs.
Allow cross-building other repos when targeting WebAssembly.
Be explicit about not building Android tests for repos other than
qtbase (until that is not longer desired).
Currently the qt5 platform configuration only has qtbase marked
with the AndroidTestRun feature.
Amends fd16c65b7e
Amends 13c460d0ff
Superseeds 60a5b7be03f5800caa8a117c3b07b60d8fb208ec
Change-Id: If8de002e0c9f748b43e3d2271ac283462603b2e6
Reviewed-by: Toni Saario <toni.saario@qt.io>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This patch enables per module control of the build instructions.
This enables documentation building in modules that are not capable
of building the module itself on linux.
Change-Id: I72b7931c5ffda9bf437a99c27c0bb340665ce927
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
If we skip module build the CMakeCache.txt does not exist.
Change-Id: Ic44bddf29f1eef1e6ffc568c871d9d7e7de71f48
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
We had two workarounds:
* script that adds Gui to tests
* create a symbolic link for the qt install dir to fake_prefix which
androiddelployqt was expecting them to be under
Both issues are fixed, thus removing the workarounds.
Pick-to: 6.1 6.0
Change-Id: Ic022bece15afe92c693d573893d260b13b4227ed
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The scripts that are used by Android test VMs are now located in qtbase
and are not easily usable by other modules. To fix that and allow other
modules to use those scripts, we install them with cmake into libexec.
Task-number: QTQAINFRA-4052
Pick-to: 6.0
Change-Id: Ibdd3658fd9fe7e007104a85d9999028a2de99a33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We want to remove the Qt .pro files for projects, except examples,
because examples are still meant to build with qmake.
To not lose coverage on examples built with qmake, add instructions that
will build the qtrepo/examples folder with qmake when the CMake
configuration has -DQT_BUILD_EXAMPLES=ON.
This means that such configurations will build examples both with CMake
and qmake.
Aside from making sure that our examples will still build with qmake, it
will gives us some some coverage that a CMake-built qmake works
correctly.
Implementation-wise, add new instructions files that can call qmake and
make depending on configuration and target type.
Pick-to: 6.0
Fixes: QTBUG-85986
Change-Id: Ie8f4cbcda03c94da2aef455e32f48dad41a4bdb0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This enables documentation building in add-ons and other modules that
need to build docs.
Task-number: QTQAINFRA-3972
Change-Id: Ic2763d6d36d26e5a1267b312727c3c268ad6d114
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit e84e85dd4c59f2c79f81ba4d8d7f04397eb0003c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is meant to be called by our CI instructions to build standalone
tests of a Qt repository.
Currently it just calls qt-cmake with
-DQT_BUILD_STANDALONE_TESTS=ON, but it might contain more things in
the future.
The script also simplifies configuring standalone tests locally, due
to not having to remember the name of the magical variable.
Change our CI instructions to use the new script.
Change-Id: I6bc02b4e94adc9d0d05fecb0fe70a561043271f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
