There is no need to, and it confuses the generation of cmake files.
Change-Id: I00c8751990e707cf32652babcb9af3e4b681561a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: I664c31d256d395d4afec81de66a84dc79ed10b9d
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There may be multiple libraries specified in the mkspec, such as
EGL and Mali, as used in devices/linux-sh4-stmicro-ST7108-g++, so
create an imported target for each one. Also populate the
Qt5Gui_EGL_LIBS variable with all created imported targets. Similar
variables are created for the used OPENGL implementation.
In the case of using the packaged ANGLE library, we already know the
exact locations of the binaries.
This makes it possible for third parties to use the same GL
implementation as used by the Qt build itself. As these are used only
privately by QtGui, they are also added to the DEPENDENT_LIBRARIES
of that target so that they are found for rpath-link usage.
On some platforms (eg Raspberry Pi), multiple include directories must
be set to include egl.h, as the headers it includes for vcos are a
bit scattered.
Task-number: QTBUG-29132
Change-Id: I1126da3d37cd51c88d3670347c8b6405b285efb5
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the warnings should have been acted upon before 5.0.
Change-Id: I20a4673d7ec80e0252aa39289c6718fe80799de7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If building angle ourselves, that's just the basic Qt include dir,
and if using an external gl, look for it in the places specified
in the mkspec.
As the qopengl.h header includes the gl header, this is a 'public
include dependency' of QtGui, so it is added to the relevant
variable and the INTERFACE_INCLUDE_DIRECTORIES of Qt5::Gui.
Change-Id: I8c2c1782e0a2600032771175444b087da28433fc
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In qtbase commit 7ac58d1ff0 (Make cmake
packages installed to /usr non-relocatable., 2013-02-11), we made
cmake config files non-relocatable if they were installed to
the /usr prefix. That was assumed to mean that this was a distro
or platform package, and was a workaround for the usr-move problem
on Fedora and ArchLinux.
However, cmake bug http://public.kitware.com/Bug/view.php?id=14041
showed that forcing absolute paths in this situation is not desirable
in cross compiling scenarios. CMake commit 6c613b433c45efb0bb013a6bd668cbb8ac740259
(Handle usr-move without forcing absolute paths (#14041), 2013-04-03)
addressed the problem in CMake, and this commit is an equivalent.
Change-Id: I065a6230bc618aa980fae6ca511ae10df4cd62c2
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We now use an absolute path, to prevent picking up the wrong plutil binary.
In addition we pipe the possible stderr output of plutil and xpath to the
null device, so that the final QMAKE_MAC_PLATFORM_NAME will be empty in
case of any errors, and caught by the isEmpty() check below.
Change-Id: I8ad24bf63162a76410c2ae223dd2fc48e7886bbf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Need to set MINGW_IN_SHELL to 1 and QMAKE_DIR_SEP to /
Change-Id: If470f1a4617555d6bc551e8cdf917779d0e64e62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the default generator is used when cross compiling
for mingw.
Change-Id: Ie536f1bca35ea38aec1232cdd95fc063c4f23e70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Qmake requires the information which extension is
used for static libs on a platform. As the ci for
windows ce is pretty new, this was not noticed before.
Change-Id: I45b0c9c59980cd352371c00aa59502e5a394e337
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
The property only needs to contain the direct include dirs of
a target. For example, Qt5::Gui does not need to contain the
include/QtCore directory because it already has Qt5::Core in
its LINK_INTERFACE_LIBRARIES.
Change-Id: I69612f42c29e6056b3d15399498d041d43a0dd6b
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use the appropriate way to load the .pri file which also
checks for its existence before loading it.
Change-Id: I7d36da1593bb7fa1b5f6fd4d10b69e20c6aaa836
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It should also have an effect for Visual Studio project files, not
just makefile generators.
Change-Id: I395071f09b29a6e8967a3d44e41d30480ae783f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
xcrun will spit out errors to stderr and nothing to stdout if it fails
to find the tool in question. By checking for an empty return value and
skipping the sysrooting we guard against mangling the tool variable.
Change-Id: I68f59a6c8116696dd75cceed7b33ac666f3468b2
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These are the same for normal builds, but differ when cross-compiling Qt.
Change-Id: I75eccc6f4b67b440a08c4aba41aabb7df686c9f9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: I1d8061302fbb8494b5ae31e20a644745fe969f10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These variables are set by the ConfigVersion.cmake file already,
so no need to maintain them manually in the Config file too.
Change-Id: I73d949fb22052f4f6acbc1f70518e73f8fbf7c9c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fedora uses configure options to set the install prefix to a location
which does not contain the cmake config files. Rather than finding
dependencies from the installation prefix, find them in sibling directories
instead.
Change-Id: I06974e9655d0dda2a18064d0f9a33997cf2cb2d3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Need to look in <android-sdk>/platform-tools/lib for dx.jar
Change-Id: I104cf157ce1795e907cca31b37c62163248b8d77
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's written to qmodule.pri by configure with a hard-coded path,
and hence need fixing up or appending, depending on which
exclusive builds are used.
Change-Id: I069c04438dc303868a76349c9bdd385adc074c0a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Extra-compilers such as objective_c.prf may reference QMAKE_CXX, so we
need to sysroot it before it's used.
Change-Id: I1e367b3d0816096300a441786619f298134de0a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a bug in dx.bat in the Google Android SDK tool where
relative paths do not work correctly. We need to use our own
version of this tool until:
https://android-review.googlesource.com/#/c/52680/
..is merged.
Change-Id: I451a3239590919d014a673f3e8e17244e96676ab
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In order to build Android Qt on Windows via
cmd.exe using the unix makefile generator,
mkspecs/common/shell-win32.conf needs
QMAKE_SYMBOLIC_LINK and QMAKE_LN_SHLIB
Change-Id: I1b3eded66cec06ab131f127c1d46b99124613561
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is a qt specific option and really should not be hard-coded.
also, the implementation used undocumented api that is internal to the
bootstrapped process, which made it impossible to de-bootstrap it.
Change-Id: If706960671744e64a9a7c366437977a800a6058e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... like qt_tool does. otherwise we get linker errors with debug builds
on windows.
Change-Id: I583f277ff3fb75c9fe5f305a6f1b5d066b840c07
Reviewed-by: Debao Zhang <hello@debao.me>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.
The work was mostly done using the following python script (might
come in handy again...):
import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')
for fn in sys.argv[1:]:
with open(fn, 'r+') as f:
lines = []
nl_count = 0
continuity_indent = None
for l in f:
m = p.match(l)
nl = l
if m:
n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
elif continuity_indent:
nl = ' '*continuity_indent + l.lstrip()
if l[-2] != '\\': # check when to stop the continuation
continuity_indent = None
elif l.startswith('#'):
nl = l.expandtabs(2)
if l != nl:
nl_count += 1
lines.append(nl)
if nl_count > 0:
print fn, nl_count, len(lines)
f.seek(0)
f.writelines(lines)
f.truncate()
Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Used by features in CMake 2.8.11.
This matches the features in FindQt4 in that version of CMake,
namely that the IMPORTED targets contain the appropriate
INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS
and that the qtmain.lib static library is automatically linked to
on Windows by executables. Additionally, the
INTERFACE_POSITION_INDEPENDENT_CODE property is set appropriately
if Qt requires users to use position independent code.
Change-Id: Ide341f43fcaf7d722a7bdf1a12b1071c7e548ccc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This matches upstream changes on https://github.com/raspberrypi/firmware/
Change-Id: Ie28c2fa574d5cd097c033926970db40e8904e42e
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
This will likely fix some odd cmake related tests in the CI.
This reverts commit 316d8ececa.
Conflicts:
mkspecs/features/data/cmake/Qt5BasicConfig.cmake.in
src/corelib/Qt5CoreConfigExtras.cmake.in
Change-Id: Ib7714746f96bf12061d92242a42296d200c56c00
Reviewed-by: David Faure (KDE) <faure@kde.org>
The version number parsing needs to handle the reported version string.
Change-Id: Ifd34b2c86b21a1c5e4c91a43447468ca6feab8cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Replaced tabs with spaces to align with space-indented code
and removed some trailing whitespace.
Change-Id: I4930afc3df206ef8ee96de3e69f0d69fc4a1c77c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Added QT_NO_CLIPBOARD, QT_NO_ACCESSIBILITY and opengles2 libs.
Clipboard and accessibility are not supported in WEC7.
Opengl ES2 libs are required for building qtgui (and other opengl
dependent) modules.
Change-Id: Ie45612bd7bada00bfcb92a0885c4bd685b82bd02
Reviewed-by: Johannes Oikarinen <johannes.oikarinen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way find_package(Qt5Svg 5.1.0) will require Qt5Core 5.1.0 or later, for
example.
Additionally, forward the EXACT keyword to find_package dependencies
so that find_package(Qt5Svg 5.1.0 EXACT) will reject Qt5Core 5.2.0, for
example.
Change-Id: I302f5a3a683e6c36ef42f1e81c5f7e6258cf5624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise we assume that the user is trying to build a random example
which just happens to live inside a qt module's repository.
Task-number: QTBUG-29756
Change-Id: I17f217b4235fbe04f2c49d1d92ce08b86bb259b9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
