They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
What's more, demonstrate two types of rendering to a cubemap:
one by one to each face, and by attaching all faces as color
attachments in one go.
Both are used by Qt Quick 3D in connection with shadows, so this
proves that the same is possible to implement with QRhi.
Task-number: QTBUG-81261
Change-Id: I5c7077224d7cae0dd6ea02ac30a9e6f9f1f0c229
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Uses the two compute shaders from Qt Quick 3D. Demonstrates
and tests both RGBA16F textures and using them (and doing
load/store with mip levels individually) in combination with
compute.
Task-number: QTBUG-81213
Change-Id: I3f0f250d5997a26c857b7c45517684c63b44e58e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
In order for SE_TabBarTabText to correctly calculate the space available
for the text it needs to get the rectangle of the tab directly instead
of relying on the option's rectangle as this may have been modified
before this point. Therefore we introduce QStyleOptionTabV4 to be able
to store the index as part of the option so it can be queried directly.
[ChangeLog][QtWidgets] Added QStyleOptionTabV4 as a subclass of
QStyleOptionTab so that the tab's index information can be obtained.
Fixes: QTBUG-50637
Change-Id: If705f5069fdd14eeccf06bc63dba4e8d2e704359
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
Every Qt::CursorShape is supported.
Tested in Chrome, Firefox and Safari.
Change-Id: I38c9024dba4af70af789ac84ad7e38f749c847d7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Turn the Metrics widget into a QTabWidget and add a tab logging
all changed signals of QScreen.
This is useful when for example debugging issues with lock screens and
laptop hibernation.
Task-number: QTBUG-79248
Task-number: QTBUG-76902
Change-Id: Ie86789fe1514cb3333a5f3def7f613f217fa6802
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The new version takes/returns a value that can be unpacked and passed to
other functions without knowing which backend is in use.
The old API will be removed in a later change when dependent modules have
been updated
Task-number: QTBUG-78570
Change-Id: I18d928ceef3cb617c0c509ecccb345551a7990af
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The aim is to make it suitable to test for High DPI
bugs, ideally removing the need to provide bug report
examples.
- Add descriptive window titles/output
- Add options to force scaling on/off
- Change the updating of the text to be done in screenChanged()
and log the signal.
- Rearrange the layout and show the descriptions as labels
Task-number: QTBUG-80323
Change-Id: Ia44c184c2b38cb18045c40b440fe785c6c17925f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Use C++ constructs like range-based for, member initialization
- Fix formatting in a few places
- Silence clang warnings:
- Add override
- Make member variables private
Task-number: QTBUG-80323
Change-Id: I5b0fda06acb6c8054aafa4dd934b763f8493a6b3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
While we are at it, remove the Border and MirrorOnce wrap modes that have
not been supported on OpenGL, because they are unsupported with Metal+iOS
as well.
Task-number: QTBUG-78580
Change-Id: I0db94b9d3a6125b3bb5d7b1db5d02a42cd94d2c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes incorrect target name for styles test.
Explicit reference of widgets and opengl libraries in dialog.pri. While
not necessary for qmake it makes our lives easier when running the
CMake conversion script.
Change-Id: I036cae9d801c80c5817421b8427fc5c91e2f7883
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove unnecessary version in tests/manual since they are always true in
the CMake port where it's impossible to have a QtVersion less than 6.0.
Change-Id: I26a13117a8c2e032a9cc70ca0f040122cbf79886
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: I83e2152826e0f95c3378374ab1c9992412022109
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit 63a1a30a01)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I092a26ef38b08c52d84adb027a1b1bdee8cc7f6b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit ce187c4f0e)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: Ie393b125ce5a35b7069cf006db0f3af8c4fda5b4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 937e014e63)
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: I83e2152826e0f95c3378374ab1c9992412022109
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: Ie393b125ce5a35b7069cf006db0f3af8c4fda5b4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Obtain the client area and output frame and position relative to the
parent window.
Task-number: QTBUG-79861
Change-Id: I193dfbcdec7e27d32a70ada08ba271260eedc969
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The concept was a nice idea to avoid accidental detach() calls
in implicitly shared containers, but it conflicts with a C++11
compatible API for them, with signatures for modifying methods
taking a const_iterator as argument and returning an iterator
(e.g. iterator erase(const_iterator)).
Change-Id: Ia33124bedbd260774a0a66f49aedd84e19c9971b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Testes file load and save, computes a sha256 hash
for verifying file content.
Change-Id: Id7f697c4dfd41e051442350f4050f04b493cfc18
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I9eae3291bc6934375404224c7242e2b23af2019b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As usual, keep some QVector overloads around to allow Qt Quick to compile.
Color attachments and vertex input bindings get an at(index) type of
accessor, unlike any other of similar lists. This is because there the
index is significant, and sequential iteration is not the only type of
operation that is performed. Sometimes a lookup based on an index will
be needed as well.
Task-number: QTBUG-78883
Change-Id: I3882941f09e94ee2f179e0e9b8161551f0d5dae7
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Forcing users to go through a QVector, when in practice they almost
always want to source the data from an initializer list, a QVarLengthArray,
or a plain C array, is not ideal. Especially since we can reason about
the maximum number of elements in the vast majority of use cases for all
the affected lists. QRhiResource is also not copyable so we do not need
the usual machinery offered by containers. So switch to a
QVarLengthArray.
Note that a resource is not a container. The only operations we are
interested in is to be able to source data either via an initializer
list or by iterating on something, and to be able to extract the data,
in case a user wishes to set up another resource based on the existing
one.
In some cases a QVector overload is kept for source compatibility with
other modules (Qt Quick). These may be removed in the future.
Also do a similar QVector->QVarLengthArray change in the srb-related
data in the backends.
Change-Id: I6f5b2ebd8e75416ce0cca0817bb529446a4cb664
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Revert surfacePixelSize() to be a getter only. With Metal this will
mean returning the "live" layer size (and so not the
layer.drawableSize), which is in line with what we expect with other
backends.
Instead, we leave it to the swapchain's buildOrResize() to "commit"
the size by setting drawableSize on the layer. With typical
application or Qt Quick logic this ensures that layer.drawableSize is
set once and stays static until we get to process the next resize - on
the rendering thread.
This of course would still mean that there was a race when a client
queries surfacePixelSize() to set the depth-stencil buffer size that
is associated with a swapchain. (because that must happen before
calling buildOrResize() according to the current semantics)
That can however be solved in a quite elegant way, it turns out,
because we already have a flag that indicates if a QRhiRenderBuffer is
used in combination with (and only in combination with) a
swapchain. If we simply say that setting the UsedWithSwapChainOnly
flag provides automatic sizing as well (so no setPixelSize() call is
needed), clients can simply get rid of the problematic
surfacePixelSize() query and everything works.
Task-number: QTBUG-78641
Change-Id: Ib1bfc9ef8531bcce033d1f1e5d4d5b4984d6d69f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It can be important to see for example the adapter enumeration that is
printed when qt.rhi.general is enabled. Make it enabled by default in
the tests.
Change-Id: I7bd073781e176d9b17b5386c548e9f8a2e16c10f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This will also cause clearing to 0,0,0,0.
Essential in order to allow fast testing of window transparency
issues in combination with QRhi and the various backends.
Change-Id: Iee2763c1d06f1d3e5d59a9142abaf30fab1dc543
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
With OpenGL a scissor (or viewport) rectangle is not allowed to have a negative
width or height. Everything else is allowed. This is also the semantic we wish to
keep for QRhiViewport and QRhiScissor.
This raises some problems. For instance, when we do bottom-left - top-left
rectangle conversion, the case of partially out of bounds rects needs to be
taken into account.
Otherwise, Qt Quick ends up in wrong scissoring in certain cases, typically when
the QQuickWindow size is decreased so the content does not fit because that will
then start generating negative x, y scissors for clipping (which is perfectly
valid but the QRhi backends need to be able to deal with it)
Then there is the problem of having to clamp width and height carefully, because
some validation layers for some APIs will reject a viewport or scissor with
partially out of bounds rectangles.
To verify all this, add a new manual test, based on the cubemap one. (cubemap was
chosen because that is an ideal test scene as it fills the viewport completely, and
so it is visually straightforward when a scissor rectangle is moving around over it)
Fixes: QTBUG-78702
Change-Id: I60614836432ea9934fc0dbd0ac7e88931f476542
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
As it was superseded by HTTP/2. Bye, Speedy. Since it's Qt 6,
we also fix the attribute's enumerator to fit our coding
convention with HTTP2AllowedAttribute becoming Http2AllowedAttribute,
and the same for HTTP2WasUsedAttribute.
tst_qnetworkreply in 'benchmark' directory of qtbase/tests
was updated - we have the logic they tested in preConnectEncrypted
in tst_http2 now.
Manual qnetworkreply test was updated (instead of SPDY in NPN failure
we can use H2, the second test was deleted - again, auto-tested in
tst_http2).
Change-Id: I559c140c333ddf72664911c6e275b1d0d2b980a9
Task-number: QTBUG-78255
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
...if there is one and the concept is applicable in the first place.
Change-Id: Iab202c1c1cdd229f4910159de4cae7ce30805ea9
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The device can be lost when physically removing the graphics adapter,
disabling the driver (Device Manager), upgrading/uninstalling the
graphics driver, and when it is reset due to an error.
Some of these can (and should) be tested manually, but the last
one has a convenient, programmatic way of triggering: by triggering
the timeout detection and recovery (TDR) of WDDM. A compute shader
with an infinite loop should trigger this after 2 seconds by default.
All tests in tests/manual/rhi can now be started with a --curse <count>
argument where <count> specifies the number of frames to render before
breaking the device. Qt Quick will get an environment variable with
similar semantics in a separate patch.
Change-Id: I4b6f8d977a15b5b89d686b3973965df6435810ae
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This was accidentally introduced by
2f33e030b8 and since manual tests are not
built by default, was not discovered earlier.
Change-Id: I5cb6d5cfe0911bdb01a33014f2648a47b7a48848
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As an option. Must opt in via setting ExternalContentsInPass in
the flags for beginFrame(). It is somewhat unfortunate to require
declaring this up front, but forcing using secondary command buffers
always, even though beginExternal() may not be used in many applications,
would be an overkill.
Change-Id: I8d52bcab40c96f89f140c4c7877b6c459925e3c7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This test displays a summary of relevant DPI and scale
factor/devicePixelRatio values:
- DPI and DPR as seen by the application
- Input from QPlatformScreen
- Input from environment variables.
Task-number: QTBUG-53022
Change-Id: I340391624b202e342f22902ffbd7228fe7fbe94b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Remove pixelScale() in favor of logicalBaseDpi(). Compute scale factor
based on logical DPI and logical base DPI, or optionally based on the
physical DPI.
Add policies for running the scale factor and adjusting the logical
DPI reported to the application. The policies are set via environment
variables:
QT_SCALE_FACTOR_ROUNDING_POLICY=Round|Ceil|Floor|RoundPreferFloor|PassThrough
QT_DPI_ADJUSTMENT_POLICY=AdjustDpi|DontAdjustDpi|AdjustUpOnly
QT_USE_PHYSICAL_DPI=0|1
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-53022
Change-Id: I4846f223186df665eb0a9c827eaef0a96d1f458f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This adds a manual test for the QTextTable border logic.
Two HTML files are bundled as resources:
table-border-test.html: Contains various test cases for the border
logic.
table-border-test-header.html: Contains a test case for printing a table
with a repeated header.
The test application allows:
- editing
- previewing
- printing
- opening the HTML in the system browser (via temp. file)
It is possible to edit the HTML with "live preview" so new test cases
can easily be implemented.
Change-Id: Ic88488bc8b7dd74d5c03c3363f55840423462325
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Leftover from the migration to QColor as color clear value.
Change-Id: Ibf49d65234a1e14d53035b46249753a5929ca22b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The Quick render loops do SkipPresent occasionally, and it all seemed
to work with the threaded one because we lack an autorelease pool on
the SG render thread. (to be corrected separately) The basic one ended
up crashing sometimes, however. Holding on to the drawable is incorrect.
Fixes: QTBUG-76953
Change-Id: I0d0ec6d09aa209d2c848d7a9dbd9b15916fe23ab
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simplistic console application with one test for each of the two
classes. Simply tests that we receive the signal when the connection
is disrupted in some way.
This patch also exports the classes for tests/developer builds
so that we can actually link with them.
Change-Id: I8066312274350984110c3f3ad3e94854adca7c2a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Have feature flags as appropriate. OpenGL is causing a mess here
but let's support what we can since some of this will become relevant
in more sophisticated mesh drawing cases with 3D in particular.
Change-Id: Idfa7b4642ec87147978e03d78d6233efbd151491
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Draws 1024 cubes at random x,y positions with varying color with
a single instanced draw call.
Change-Id: I8737503acf23866ad4734b1d88753415a3b93445
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...but this will vary between backends, or in some cases
even between implementations of the same API.
Point size is settable only via the vertex shader (gl_PointSize).
It is silently ignored with D3D and HLSL.
Line widths other than 1 are supported only on OpenGL and Vulkan.
(but this is in fact deprecated with GL and optional with Vulkan)
Add QRhi::Feature values for both.
The line width is now settable on QRhiGraphicsPipeline. It is not a
dynamic state since the static, per-pipeline width is good enough for
most cases. (and the feature is not supported on half of the backends
anyways so it will get limited use in practice).
Change-Id: I6d3a32269527c452b794b2cb8b0f03101eab40b2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix most clang warnings about override, nullptr, range-based for loops.
Change-Id: Id47e57adb63a38e2f397a31511b788a2432c97cf
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
D3D11 and GL (4.3+, ES 3.1+) will come separately at a
later time.
Change-Id: If30f2f3d062fa27e57e9912674669225b82a7b93
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I0bb1d1409cb0c8f38b7582bb5ce6bbc2b047b6fc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The class used the default debug operator for QObject, which outputs
the object's address. This makes it hard to compare the log output.
Make the existing QObject formatting helper from the EventFilter
publicly usable by providing a helper with a stream operator.
Change-Id: Ifab83e23cc792a5efe231fd9ae84e0439ab0d609
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Comes with backends for Vulkan, Metal, Direct3D 11.1, and OpenGL (ES).
All APIs are private for now.
Shader conditioning (i.e. generating a QRhiShader in memory or on disk
from some shader source code) is done via the tools and APIs provided
by qt-labs/qtshadertools.
The OpenGL support follows the cross-platform tradition of requiring
ES 2.0 only, while optionally using some (ES) 3.x features. It can
operate in core profile contexts as well.
Task-number: QTBUG-70287
Change-Id: I246f2e36d562e404012c05db2aa72487108aa7cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Set AA_UseHighDpiPixmaps.
Task-number: QTBUG-52622
Change-Id: Ic4373a9c94952f50bc1ad36bcc0dec850efc124a
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the toolbar was moved from one position to another it could end up
increasing the size of the saveState data due to extra lines. This
removes any needless ones that should not be included.
Change-Id: I1c5d094ae1405d6a82db5fcdc3cd081904706837
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Fix QOverload<void>::of(), causing
../../../../include/QtCore/../../src/corelib/global/qglobal.h: In instantiation of ‘struct QConstOverload<void>’:
Q_DECL_CONSTEXPR auto operator()(R (T::*ptr)(Args...) const) const Q_DECL_NOTHROW -> decltype(ptr)
and add a missing .pro-file.
Change-Id: I19597adc33f2323a9f7dea9ee5ce94546f0e8f12
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fix:
gestures.cpp:46:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:47:5: note: here
gestures.cpp:48:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
gestures.cpp:52:5: note: here
main.cpp: In function 'QByteArray windowsVersionToString(QSysInfo::WinVersion)':
main.cpp:40:12: warning: enumeration value 'WV_CE' not handled in switch [-Wswitch]
...
main.cpp: In function 'QByteArray macVersionToString(QSysInfo::MacVersion)':
main.cpp:68:12: warning: enumeration value 'MV_10_12' not handled in switch [-Wswitch]
...
widget.cpp: In member function 'CustomItem* Widget::checkedItem() const':
widget.cpp:238:12: warning: 'item' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I434784e86d127e56b92663cb45eba7d60d8f8eaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The following enumerations were obsolete for a log time but not marked
as deprecated:
- WA_NoBackground
- WA_MacNoClickThrough
- WA_MacBrushedMetal
- WA_MacMetalStyle
- WA_MSWindowsUseDirect3D
- WA_MacFrameworkScaled
- AA_MSWindowsUseDirect3DByDefault
- AA_X11InitThreads
- ImMicroFocus
mark them as deprecated and remove the usage inside QtBase so they can
be removed with Qt6
Change-Id: Ia087a7e1d0ff1945286895be6425a6cceaa483fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Mark some long obsolete functions as deprecated so the can be removed
with Qt6:
- QDialog::setOrientation()/orientation()
- QDialog::setExtension()/extension()/showExtension()
- QFileDialog::setNameFilterDetailsVisible()/isNameFilterDetailsVisible()
- QFileDialog::setResolveSymlinks()/resolveSymlinks()
Change-Id: Ibbd5b4192ea8ab483d6b2a8dbf9879f29f9ee86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Some of the spdy/3 tests don't pass anymore because those services
no longer support spdy/3. Solve this by updating it to HTTP/2 (h2).
Change-Id: Ib3ef6109b75f4298fed15c1c7922deca35459df9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The Qt and CoreText positioning is now in sync.
Change-Id: I0cbb5b150d1bef732674b8d42c64a040773a62ab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On Linux, the printer panel impacts the application startup time,which
can be annoying when testing other dialogs.
Change-Id: Id13446047cf50765951a6bb5182ee50cae983457
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add an option that moves windows back to the top left corner,
which is useful when some window (of some application saving its
position) is lost after changing the monitor setup.
Change-Id: If358b1ed7f481f2bb98e375e88f11049f97a4a91
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It takes multiple source models and concatenates their rows into a single model.
With full unit tests.
[ChangeLog][QtCore] New class QConcatenateTablesProxyModel, to
concatenate the rows from multiple source models.
Change-Id: Iaf4f325473adef106f423677fdc5ee0e35e87d35
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
When a screen is positioned to be above another, then the toolbutton
menu could be shown on the wrong screen if it was deemed to not fit
below the button the same screen. This ensures that it shows it on the
right screen when there is sufficient space to do so.
Change-Id: Ia626b28f74c1931904ff5b30cca17e63914d3c79
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since we moved the menu items validation and target/action to
QNSView (thus relying on the responder chain), we need to take
care of case when the applications that doesn't have any window
open. By adding similar methods to QCocoaApplicationDelegate,
the last responder, we ensure the menu items will be validated
and will trigger properly. This is particularly necessary for
dock menu items, which live separately from any top-level widget.
Dock menu added to Menurama which won't quit when its last window
is closed. This way we can test that dock menu items will trigger
in the absence of any window.
Change-Id: I56d864eb9da1f8dd5adb2a3b6c3dd5304c723117
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Add a display label showing the screen parameters.
- Add a menu option to launch secondary windows and restructure
the code accordingly
Change-Id: I2bdb76da0b0a00e62db41e674aa93cef9598fe67
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
