this makes it possible to exclude modules from the build without moving
their sources out of the way. substitutes the much-requested -no-webkit.
not adding a symmetrical option, as it is relatively pointless:
to build only specific "leaf" modules, you only need to run
"make module-qt<module> ..." once you configured. and removing
particular "intermediate" modules is achieved with this very option.
Task-number: QTBUG-26697
Change-Id: I25cebdbd029885a2c653c4cde696f9bb78691768
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change the default libexec directory to 'lib' on Windows for default
configurations. This makes sure that e.g. qtwebprocess can actually
find & load the right Qt libs.
A separate libexec directory was introduced to avoid conflicts between
a system-wide Qt in PATH and a custom Qt installation. However, since
there are no system wide Qt installations on Windows this isn't an
issue, but getting the executables to find its Qt libraries is.
Alternatively we could have also placed it in the 'bin' directory.
However, putting it in the 'lib' folder carries the notion that,
unlike the binaries in the bin, the libexec executables might have
to be deployed with a target application.
The exception is when a separate archdata prefix is specified, and
$$archdata/lib won't contain Qt libraries. In this case we use libexec
like on the other platforms too.
ChangeLog: [Qt for Windows] Fixed launching of QtWebProcess.exe by
changing default libexec directory to 'lib'.
Task-number: QTBUG-29661
Change-Id: Icbb15fb98474d6fef8ac9310f2e2b482d3282f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
On Mac, GCC and Clang print "(framework directory)" at the end of the
directory listing for includes if that's a framework dir. The directory
with "(framework directory)" at the end does not exist, so it doesn't
affect anything by being there.
But we don't have to keep the list longer just for that.
Change-Id: I3d031d3d15c75801ec0d6112b2c913bd63e5def3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make the settings path to be relative to $prefix, instead of absolute.
And update the configure -help output to match the actual code.
Change-Id: I71e4ad6e3db046fec95ef057ae7f7bc566bc5794
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The configure.exe already supported the -directwrite flag for some time.
This commit adds this flag to the configure script as well so
environments which use MinGW as cross-compiler can now also
optionally enable DirectWrite support.
The original configure.exe pieces were added in commit
c0fed43b04dec8bd549043d3ea5e28908128082c of the Qt4 repository.
The directwrite argument which this commit adds to the configure
script and the behaviour of it should be exactly the same as the
current configure.exe.
To get Qt built with DirectWrite support using the MinGW-w64 toolchain
at least mingw-w64 trunk revision 5451 (Nov 10 2012) is needed
Change-Id: I519718068cf5732c7ebcbf0a0fafb6b747db0bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the compile-all-mocs-as-one-file feature is gone for years
Change-Id: I6c35bce59c36b6920af2498661172b5938eeba52
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
they cannot be legally used outside qtbase - it's the antithesis of
modularization.
Change-Id: I847844ea0ddce599f130f396d68cb61fa8f34135
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-largefile is regarded as a library named argefile and added to
Makefile as a link flag. It will cause a link error.
Change-Id: I8ac30896d4e473f7e98c937c8906b1b9c620cf1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The include paths that the mkspecs set into the OpenGL/AGL frameworks
must take the SDK into account.
(The headers in 10.8 have slightly changed wrt 10.7, leading to compile
errors because framework style includes (<OpenGL/foo.h>) within the system
headers are resolved to the SDK framework headers.)
Change-Id: I6113cdb95b462d587f593682e03e81e920f3f672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only thing -no-prefix-install did was changing the install path
defaults on mac. and the result didn't work particularly well.
Change-Id: Iadd0f4b494b6920b595e184f858ef810f5222b0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Some of the xcb- libraries we depend upon are not (yet) common across
distributions. This is problematic for binaries that should be working
on different distributions. The patch mitigates this by:
Adding the files from
libxcb-proto (version 0.1.6), compiled with libxcb-1.5
xcb-util (version 0.3.9)
xcb-util-image (version 0.3.9)
xcb-util-keysyms (version 0.3.9)
xcb-util-renderutil (version 0.3.8)
xcb-util-wm (version 0.3.9)
from xcb.freedesktop.org/dist to src/3rdparty/xcb.
Adding a configure option '-qt-xcb' to use the sources instead of
linking to the respective runtime libraries.
Task-number: QTBUG-27803
Change-Id: I6ea87daa382871b2b9072a601511523fa0b9f44b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
By not making this a compile time decision we ensure forward
compatibility for older xcb versions if the xcb plugin is built against
a newer xcb.
Change-Id: I744777d53bf7b8deb6eff372494f4403d19d364c
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so they are uniformly available to all modules.
Change-Id: I734f703c5923c42cb26f1456ed960cecc01c4b41
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is opt-in (default: no). When configured with
"-proxies-system-default", Qt automatically picks up the system
proxies.
Change-Id: I8cc002f29587854f448d97117b08c43d8eedec76
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Martin Smith <martin.smith@digia.com>
The new 'prepare_docs' CONFIG option triggers the documentation rules in
default_post to generate two extra targets: prepare_docs and generate_docs.
The prepare_docs stage runs qdoc with the -prepare option, which means qdoc
will only generate index files, and the generate_docs stage will call
qdoc with -generate, which reads the index files and generates the final
output. The regular docs target will then run the prepare_docs target
for all submodules before running the generate_docs target.
This ensures that when generating the final output, qdoc has all the
index files for all the other modules available, to be able to resolve
cross-references between the various Qt modules.
This patch needs a follow-up in qt5.git to add CONFIG+=prepare_docs, so
that the root Qt5 build will be able to hook into this new behavior.
Change-Id: I654d7f0d4d5a41d9be208e6d3a8923bf0194f9ad
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
... so we can test those functions with host and cross compilers.
Change-Id: Ifebfdac54580633c797f77b139514cf9d66edd8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a new non-native style for Qt.
It is intended as a replacement for the now aging
Plastique and Cleanlooks styles.
Change-Id: I30c0518a69e4e3b8b2b05ee7d84c3a5a1f307578
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These options were only used for QWS in 4.x, and their documentation
should have been removed as part of f220f99a6d.
Task-number: QTBUG-27369
Change-Id: Ia85a20bdac40087c02f6876f53ce21568759d697
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-26140
Change-Id: Ifee00a9d15b053bb9d2c7b0d9bedca45e4d589d3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
GTK_WIDGET_TOPLEVEL was deprecated in 2.20 and no longer available in
gtk 3. gtk_widget_is_toplevel() was introduced as a replacement in gtk
2.18 => make that the minimum requirement.
Change-Id: Ie5d2d8bd824af916a9764c66a7046f07a77b1748
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
