The test passed mostly by accident so far, as the created QByteArray
was shorter than what the test assumed.
Change-Id: I06858801d83a504eadc73ec2be281c88f8ffad5d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since I can't #include qobjectdefs from qnamespace because of circular dependency,
move the Qt macro in the qtmetamacros.h header.
Deprecate QObject::staticQtMetaObject since now one can just use Qt::staticMetaObject
Change-Id: I11982aa17c2afa2067486b113f8052672f3695eb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The throw() specification is no longer accepted in C++17 mode, so remove that.
Also pass the -std=c++1z to the compiler as Qt is going to require C++17 soon
Change-Id: I6d249e574d90cd1cf5c0ea595830d2db07681050
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
1. Add a new verification callback. This gives an option
to report errors directly from this callback (by emitting
handshakeInterruptedOnError()). This allows an application
to explain to its peer why the handshake was interrupted (by
sending a corresponding alert message).
2. This also means we want to notice such alerts (in Qt,
from the application's point of view, they are mostly
informational only, no interaction is required). So we
also introduce a new 'info callback', that can notice alert
messages read or written. We also introduce two new enums
describing the level and type of an alert message. QSslSocket
gets three new signals (for incoming/outgoing alerts and
verification errors found early).
3. In case we requested a certificate, but the peer provided
none, we would previously abruptly close the connection without
a proper alert message (and such a situation is not handled
by any verification callbacks, since there is no certificate(s)
to verify essentially). So we now introduce a new verification
option that maps to what OpenSSL calls 'SSL_VERIFY_FAIL_IF_NO_PEER_CERT'.
This way, the proper alert will be generated.
Fixes: QTBUG-68419
Change-Id: I5d1e9298b4040a2d4f867f5b1a3567a2253927b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code was assuming that if the parsing of the value worked,
then it must be a list of 4 variants. But in this case it's just
a single length.
This came from <td> using 4 values for border-width
while other elements use a single value. But the storage
is shared. So the fix is to use 4 values everywhere.
When reading 4 and there's only one, it gets duplicated,
so the caller can just use the first one in that case.
Task-number: QTBUG-80496
Change-Id: I682244b6e3781c4d673a62d5e6511dac263c58e8
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This will blacklist this test for ci. Currently blocking enabling tests
for MSVC2019
Task-number: QTBUG-65667
Task-number: QTQAINFRA-2875
Change-Id: I7198490b1529ce2f4409bfa7399031dad7644a06
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch aims to implement the session management available on macOS.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Fixes: QTBUG-33034
Change-Id: Id5d7416cb74c762c5424a77c9c7664f0749da7f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code was initially introduced in
9204b8c31e but getting the names were
conditioned on whether or not Windows identified it as a truetype font.
This excluded cases which had preferred names embedded but was not
truetype fonts. To fix that we run the code unconditionally.
[ChangeLog][Windows] Fixed a bug where some fonts would not be
accessible by referencing their typographic name.
Fixes: QTBUG-78556
Change-Id: I8823684b09cce3b1b8722b1e609a5bb49b13da13
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We need to reset the pressed index when the decoration was pressed on
otherwise if the mouse ends up over an already selected item that was
previously clicked on. This prevents it from thinking that the mouse
has been released on this item right after pressing on it.
Fixes: QTBUG-59067
Change-Id: Iab372ae20db3682ab0812661f86533079ba4083c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Some structures needed to be cleaned for the reuse to be safe.
Reusing it cuts down on the overhead in lancebench.
Also uniqueness of block names are now enforced, and the common pattern
of "end_block blockName" could now be parsed if not always commented
out by begin_block handling.
Change-Id: I0daf6445292383aaab9392550d0842e0a654ad27
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead of OID as string, OpenSSL returns a human-readable name.
No need to fail then, use such a name in QVERIFY if OID not found.
Fixes: QTBUG-80329
Change-Id: I4392fc9f37367f7c34c05d172db015b44e2a8497
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also, change the notion of 'unsupported protocol' for QSslSocket,
previously it was SslV2 and SslV3, now instead it's all versions
of DTLS and UnknownProtocol:
- makes no sense at all to connect using TCP socket and then
suddenly start using DTLS_client/server_method
- UnknownProtocol is not to be set in a configuration,
unknown means that some ciphersuite's protocol version
cannot be established.
- 'disabledProtocols' auto-test becomes 'unsupportedProtocols'
and tests that QSslSocket fails to start encryption if the
protocol version is wrong.
Handling these enumerators (SslV2 and SslV2) as errors
not needed anymore. Removed from QSslContext and our
existing backends (qsslsocket_whatever).
TlsV1SslV3 enumerator is not making any sense at all (previously
was [SSL v3, TLS 1.0], then became "the same as TLS v. 1.0", but
now this name is very confusing. Removed.
Task-number: QTBUG-75638
Task-number: QTBUG-76501
Change-Id: I2781ba1c3051a7791b476266d4561d956948974a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
macOS fails to create a zone for the name its own systemTimeZone
claims to have (see new comment). So make sure we do consistently
recognize the name systemTimeZoneId() returns, using systemTimeZone
from which we got its name.
Add minimal testing of system time-zone.
Fixes: QTBUG-80173
Change-Id: I42f21efbd7c439158fee954d555414bb180e7f8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For Metal and Vulkan this needs actual work because that's where
the concept of renderpass descriptors is relevant. GL and D3D can
just return true always.
The big benefit of this is that Qt Quick can now compare renderpass
descriptors via isCompatible() for its pipeline cache (similarly to
how it is already using isLayoutCompatible() for srbs), and so
renderpass descriptors for layers (Item.layer, ShaderEffect) will
typically be compatible and so can pick up pipelines created by other
layers from the cache.
Also add autotests for shader resource binding and renderpass descriptor
compatibility.
Task-number: QTBUG-80318
Change-Id: I0008bc51c4ee13b0113d2c8caf799e1257f18a18
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The ones we reject used a zero offset while the one that does parse
(though it shouldn't - revised comment) has a one hour offset. Made
them all use that offset and added a partner test that has no invalid
characters, so ensure the success of the invalid character tests isn't
due to falsely rejecting the valid date/time text to which the invalid
characters are added.
Task-number: QTBUG-80038
Change-Id: I6e3dd79b981af6803e60877229c56599cfd719cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdatetime implementation's rfcDateImpl() uses regexes which did
not match its comments; nor did either the regexes or the comments
match what was documented. A review of relevant RFCs suggests we
should revise this in future, probably at Qt 6.
The documentation also only addressed the formats recognized when
parsing a date-time, without indicating how they are serialised or how
dates and times are handled separately.
Added a note to the tests for the read-only formats, to remind the
reader that the RFCs merely recommend recognising these - be
permissive in what you expect and strict in what you deliver.
Change-Id: I0f0bec752e7a50bde98cceceb7e0d11be15c6a6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures that the list of input files are sorted before being
collected. This provides consistency when comparing results generated
from the CMake port which do not have the same order as qmake.
Change-Id: I46e3acf7c26dfd21fd0c1196bdeddf22acbf6ba5
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
While we are at it, remove the Border and MirrorOnce wrap modes that have
not been supported on OpenGL, because they are unsupported with Metal+iOS
as well.
Task-number: QTBUG-78580
Change-Id: I0db94b9d3a6125b3bb5d7b1db5d02a42cd94d2c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reimplement QDomDocument using QXmlStreamReader and switch to the new
implementation starting from Qt 6.
The changes in the behavior are reflected in tests: some test cases
which were marked as "expected to fail" are now passing.
Task-number: QTBUG-76178
Change-Id: I5ace2f13c036a9a778de922b47a1ce35957ce5f6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We already did that when parsing from CBOR binary data, so the code was
already present.
[ChangeLog][QtCore][QCborValue] The constructor taking a CBOR tag and a
value to be tagged now attempts to convert to a QCborValue extended
type. For example, if the tag is 0 (UnixTime_t) and the payload is a
number, the resulting object will become tag 1 (DateTime) and the
payload will be the the ISO-8601 date/time string.
Fixes: QTBUG-79196
Change-Id: I6edce5101800424a8093fffd15cdf650fb2fc45c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Calling QColor::setFoo() is currently inconsistent - some setter do
invalidate the colors, some don't. Unify it by calling invalidate in
every setter.
Task-number: QTBUG-62452
Change-Id: Ia4f0bd16ea30e9659bc989ffc2b319892438b84b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The convenience functions setBackground(), setForeground() and
setSizeHint() a default constructed value as 'reset'. This means a
default constructed QBrush or QSize is returned in the data() function
which leads to an unexpected background or forground color or size hint.
Therefore check if the passed value is a default constructed value and
set an empty QVariant instead which.
[ChangeLog][QtWidgets][ItemViews] The convenience views
QList/Table/TreeWidgetItem now treat a default constructed QBrush or
QSize as an empty QVariant which allows to reset the values set to it's
default values.
Task-number: QTBUG-76423
Change-Id: I840570bbad3e5fd8c5b4b58903b4fd0066dbdeb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDomElement::setAttribute(QString, double) did not use QString::setNum()
but qsnprintf(). This is wrong because qsnprintf() is using the current
locale instead QLocale::C. It was also inconsistent to
QDomElement::setAttributeNS() which was already using QString::setNum().
Also fix the documentation which stated that all
QDomElement::setAttribute() format the values according the current
locale.
Fixes: QTBUG-80068
Change-Id: Iabb0b39c0d0723060527542c283a5435f26f31ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allegedly Apple has fixed the bug that made this necessary, so we
should be able to include these two test-cases once more.
This reverts commit ba9585bd02.
Fixes: QTBUG-69875
Change-Id: I5ac6019c0d647691eda6cdbb2a53e7471859d4a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QComboBox had no option to tell the user that he must select an item -
there was no placeholder text like e.g. in QLineEdit. This feature is
widely used in html forms so we should support it also.
Therefore add a new property 'placeholderText' to specify a text which
should be shown when the current selected index is invalid.
[ChangeLog][QtWidgets][QComboBox] QComboBox got a new property
'placeholderText'
Change-Id: If6dac45c9f43455474e267907b0b0d893301c611
Fixes: QTBUG-1556
Fixes: QTBUG-2776
Fixes: QTBUG-77141
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Consider this simple example:
QLineEdit edit;
edit.setInputMask( "9-9-9-9-9-9" );
edit.show();
Without any input, m_text will contain: " - - - - - ". text() removes
the input mask's mask characters from that and returns " ". A string
with 6 spaces. Thus currently the End key jumps to position 6, which is
in the middle of the string. Using m_text the End key jumps to the actual
end.
[ChangeLog][QtWidgets][QLineEdit] Fixed End key in combination with
certain input masks.
Task-number: QTBUG-16187
Task-number: QTBUG-20414
Change-Id: Ibb30a1dfa2f78103611b5afc9971dc43e8bdcc4a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Provide pointer to member function overloads for the QShortcut ctor. The
ctor with two functors but no contexts is not provided since it creates
ambiguousness.
[ChangeLog][QtWidgets][QShortcut] QShortcut ctor has now pmf overloads
Fixes: QTBUG-77816
Change-Id: Ic9a759cde5150dbb94c2fd351b88ee8e447e0852
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Within QTreeView::setModel() the header might emit columnCountChanged
which then tries to update the geometries based on the old model which
is wrong.
Fix it by setting geometryRecursionBlock to true so
QTreeView::updateGeometries() will not ask the old model for it's data.
Fixes: QTBUG-75982
Change-Id: Ia0dd36cd7c6c5347fbc285deac43da6941accbe7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
