Commit Graph

558 Commits

Author SHA1 Message Date
Frederik Gladhorn
a1d2bf257e Merge "Merge remote-tracking branch 'origin/5.3' into dev" into refs/staging/dev 2014-07-24 22:37:52 +02:00
Olivier Goffart
8d15068911 QSettings: use QSaveFile and QLockFile to write the settings
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.

As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.

[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.

[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings

Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-07-24 18:50:40 +02:00
Thiago Macieira
4fcd5a3da9 Make QTextStream respect QLocale with OmitGroupSeparators
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.

Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2014-07-24 01:57:32 +02:00
Kai Koehne
ea34893b8f Support setting a default severity level for QLoggingCategory
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.

This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.

For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:

Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);

[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.

Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
2014-07-23 15:38:10 +02:00
Kai Koehne
e668837b9c QDebugStateSaver: Fix trailing space issues
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.

Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.

Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
2014-07-23 13:33:25 +02:00
Simon Sasburg
3905c6f00d Add QFileDevice::MemoryMapFlags::MapPrivateOption flag.
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.

Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2014-07-23 07:20:40 +02:00
Frederik Gladhorn
abd3b8030c Merge remote-tracking branch 'origin/5.3' into dev
Conflicts:
	src/widgets/kernel/qwidget_qpa.cpp
	src/widgets/widgets.pro

Change-Id: I697eec936c4e1a6c360edc8f0b472e23c0461ecb
2014-07-22 20:21:19 +02:00
David Faure
6f3bb0aafa tst_qurl: add tests for mailto parsing and toString. No bug.
This was prompted by https://git.reviewboard.kde.org/r/119221

Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-07-22 11:01:52 +02:00
Kai Koehne
87aceebf42 QDebug: Add resetFormat()
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.

Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2014-07-15 13:06:38 +02:00
Frederik Gladhorn
776ddcab2c Merge "Merge remote-tracking branch 'origin/5.3' into dev" into refs/staging/dev 2014-07-10 13:13:55 +02:00
Frederik Gladhorn
f035786021 Merge remote-tracking branch 'origin/5.3' into dev
Change-Id: Ia12ffdb27ecdf25c2a2bdb0eed1945387502108a
2014-07-10 10:11:11 +02:00
Kai Koehne
6d166c8822 Add QDebug::noquote() stream modifier
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.

This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.

Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-07-10 09:27:44 +02:00
Friedemann Kleint
72024fd50c Reduce repetitive invocations of QFINDTESTDATA.
Store the file names in variables instead.

Task-number: QTBUG-38890
Change-Id: I65f28bb62674f14aa099e935a9d7a4e9e6e90ba9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
2014-07-10 07:07:30 +02:00
Friedemann Kleint
cdf9aed630 tst_qdir: Move QFINDTESTDATA() from init() to constructor.
Check result in initTestData().

Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().

Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-07-09 10:59:42 +02:00
Thiago Macieira
1d111091b5 Make QTextStream use group separators in floating-point numbers
Like for integers, this is activated only on QLocales other than C.

[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.

Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
2014-07-05 19:06:14 +02:00
Frederik Gladhorn
14a80bd4df Merge "Merge remote-tracking branch 'origin/5.3' into dev" into refs/staging/dev 2014-07-04 18:46:06 +02:00
Frederik Gladhorn
39a290af6c Merge remote-tracking branch 'origin/5.3' into dev
Conflicts:
	src/gui/accessible/qaccessiblecache_mac.mm
	src/gui/accessible/qaccessiblecache_p.h
	src/plugins/platforms/cocoa/qcocoaaccessibilityelement.h
	src/plugins/platforms/cocoa/qcocoawindow.h
	src/plugins/platforms/cocoa/qcocoawindow.mm
	src/widgets/kernel/qwidget_qpa.cpp

Manually moved change in qwidget_qpa.cpp to qwidget.cpp
    (cd07830e3b)

Change-Id: Ia51f471f9b53de2f3b07d77ea89db9303ac8961d
2014-07-03 23:56:45 +02:00
Friedemann Kleint
0831cb26f4 Ensure that QTemporaryFile clears all file mappings.
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.

Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-07-03 06:34:51 +02:00
Morten Johan Sørvig
ddeb907442 Skip unstable autotests in QtBase.
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.

Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)

Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
2014-07-02 09:28:34 +02:00
David Faure
9ee27005ee qDebug: fix data race in qt_message_print
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.

Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.

Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.

Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-07-01 20:23:31 +02:00
Frederik Gladhorn
a09a8d509a Merge remote-tracking branch 'origin/5.3' into dev
Conflicts:
	mkspecs/qnx-x86-qcc/qplatformdefs.h
	src/corelib/global/qglobal.h
	src/network/socket/qnativesocketengine_winrt.cpp
	src/plugins/platforms/android/androidjniaccessibility.cpp
	src/plugins/platforms/windows/qwindowswindow.cpp

Manually adjusted:
	mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
	to include 9ce697f2d5

Thanks goes to Sergio for the qnx mkspecs adjustments.

Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
2014-07-01 16:25:19 +02:00
David Faure
884b381576 Fix data race on QLoggingCategory when using qDebug from multiple threads
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.

Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
2014-06-20 21:54:04 +02:00
Thiago Macieira
3ccfc351fd QProcess: Handle spurious socket notifications for stdout and stderr
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.

Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.

That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.

Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2014-06-12 17:54:11 +02:00
J-P Nurmi
0fcce50af0 Merge remote-tracking branch 'origin/stable' into dev
Conflicts:
	mkspecs/features/qt.prf
	src/plugins/platforms/xcb/qxcbwindow.h
	src/tools/qdoc/qdocindexfiles.cpp
	src/widgets/kernel/qwidget_qpa.cpp

Change-Id: I214f57b03bc2ff86cf3b7dfe2966168af93a5a67
2014-06-05 22:26:44 +02:00
Lars Knoll
7df8b1ada4 Properly escape bytearray data outside the ascii range when using a codec
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.

Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-06-04 23:06:16 +02:00
Olivier Goffart
523440a15f QSaveFile: error out in open when the file is a directory
Change-Id: Ifb1697fedf6dd28fe317282c8b4824f34ec61981
Reviewed-by: David Faure <david.faure@kdab.com>
2014-06-04 12:25:02 +02:00
Bernd Weimer
ce6c0d2e61 QNX: Fix tst_qfilesystemwatcher
If QNX does not have inotify there is no native engine.

Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
2014-06-03 17:25:36 +02:00
Olivier Goffart
7e5e7eeaa1 QSaveFile: follow symbolic links
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.

Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
2014-05-30 19:36:38 +02:00
Simon Hausmann
508b95899d Merge remote-tracking branch 'origin/stable' into dev
Change-Id: Ia36e93771066d8abcf8123dbe2362c5c9d9260fc
2014-05-22 07:46:17 +02:00
Denis Shienkov
aefa611f0c QWinOverlappedIoNotifier: Add an extended waitForAnyNotified() method
The existing waitForNotified method has the design limitation that it
doesn't allow the tracking of multiple I/O operations on a single
file handle.

Therefore we introduce an additional method waitForAnyNotified that
returns a pointer to the triggered OVERLAPPED object.

Change-Id: I536ed7f6828daa2b0ce03f2d662eeb10aa89ca99
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-05-21 02:15:10 +02:00
Bernd Weimer
1ea0d59c4a Skip tst_QLockFile::noPermissions
QLockFile "noPermissions" test is not applicable with root
privileges.

Change-Id: I5779da524f24d0f1b9ef519d654856a6200da6bf
Reviewed-by: David Faure <david.faure@kdab.com>
2014-05-19 19:33:15 +02:00
Bernd Weimer
b8f96418ed Skip some qsavefile auto tests
Some of the QSaveFile tests are not applicable with root privileges.

Change-Id: I1a22906c0b14acf144f1849719152dfe9d79f426
Reviewed-by: David Faure <david.faure@kdab.com>
2014-05-19 19:33:15 +02:00
Bernd Weimer
87152d3c89 QNX: Fix tst_qfileinfo
Change-Id: Ia97a0c661d675e4f5ba800c32f8368583d58ee20
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
2014-05-14 09:12:16 +02:00
Frederik Gladhorn
3d4aeb7919 Merge remote-tracking branch 'origin/stable' into dev
Conflicts:
	src/gui/kernel/qguiapplication.cpp

Change-Id: Ibe75603dc8a51769db6550ea3f07bc8d19b0be85
2014-05-13 22:19:10 +02:00
Thiago Macieira
f2a40fa071 Don't assume QLocale::codecForLocale always returns non-null
It may return null during program exit, due to QCoreGlobalData global
static already having been destroyed. If that's the case, QTextStream
needs to fall back to Latin 1, like QString::toLocal8Bit and
fromLocal8Bit already do.

Task-number: QTBUG-38316
Change-Id: I5949c8dec15b60f4a13b5d9307ed6abfc799fe20
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2014-05-11 05:13:49 +02:00
Frederik Gladhorn
9cfdd66b64 Merge "Merge remote-tracking branch 'origin/stable' into dev" into refs/staging/dev 2014-05-08 20:31:31 +02:00
Keith Gardner
43f52f93b5 Updated corelib's unit tests to use QSignalSpy's functor constructor
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.

Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
2014-05-08 04:22:54 +02:00
Frederik Gladhorn
1326cd15f7 Merge remote-tracking branch 'origin/stable' into dev
Conflicts:
	mkspecs/qnx-x86-qcc/qplatformdefs.h
	src/corelib/global/qglobal.h
	src/opengl/gl2paintengineex/qpaintengineex_opengl2.cpp
	src/opengl/qgl.cpp
	src/opengl/qglpixelbuffer.cpp
	src/opengl/qglshaderprogram.cpp
	tests/auto/opengl/qglthreads/tst_qglthreads.cpp

Change-Id: Iaba137884d3526a139000ca26fee02bb27b5cdb5
2014-05-06 16:50:03 +02:00
David Faure
31ce6f50c6 Add QUrl::fromUserInput overload with a cwd argument.
Useful for any application that can take URLs on the command-line, so that
full paths and relative paths can also be accepted.

Change-Id: I8a2c50f36d60bdc49c065b3065972fd5d45fa12a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2014-05-06 01:20:17 +02:00
Friedemann Kleint
f3bc9f5c5c Add locations AppDataLocation, AppLocalDataLocation to QStandardPaths.
On Windows, DataLocation currently returns the value obtained by
passing CSIDL_COMMON_APPDATA to SHGetSpecialFolderPath(). This is
the local non-roaming path. For actually storing settings, the roaming
path should be used (CSIDL_APPDATA). Introduce new AppDataLocation to
return that path and AppLocalDataLocation for the local path and deprecate
DataLocation.

[ChangeLog][QtCore][QStandardPaths] QStandardPaths now has new
enumeration values AppDataLocation, AppLocalDataLocation to be able
to differentiate between roaming and local paths on the Windows
operating system. DataLocation is deprecated in favor of AppDataLocation.

Task-number: QTBUG-38483
Change-Id: Ib1de8c7031a863ed5eac10c747de6f7ff1a090c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
2014-04-29 12:28:16 +02:00
Friedemann Kleint
403a9d97d6 Stabilize tst_qfilesystemwatcher::watchFileAndItsDirectory().
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.

Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
2014-04-25 06:58:27 +02:00
Frederik Gladhorn
98d3e40fb7 Merge remote-tracking branch 'origin/stable' into dev
Conflicts:
	mkspecs/qnx-armv7le-qcc/qplatformdefs.h
	src/printsupport/kernel/qcups.cpp
	src/widgets/styles/qstyle.h
	tests/auto/widgets/itemviews/qlistwidget/tst_qlistwidget.cpp

Change-Id: Ia41e13051169a6d4a8a1267548e7d47b859bb267
2014-04-11 14:36:55 +02:00
Kai Koehne
b11adb825c Logging: Be also more strict with value of logging rule
Only accept lower-case "true" and "false", as documented.

The old check didn't match either the documentation, nor the QSettings/
QVariant behavior (where, for a boolean value, any lower-cased content
that not empty, "0" or "false" is considered true).

Change-Id: I317d29c16a27f862001b9dff02e8298df8acf5a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
2014-04-03 11:07:07 +02:00
Iikka Eklund
0ab63b035a Merge remote-tracking branch 'origin/stable' into dev
Change-Id: I2a6eb9dd7724931bc89f28bcc156e77c4e26d069
2014-04-01 11:44:27 +03:00
Mitch Curtis
4f50be8d18 Properly serialize QFont.
Some data was never serialized (styleName, hintingPreference) and
some was incorrectly serialized (styleStrategy). This change also adds
auto tests for every applicable QDataStream version.

[ChangeLog][QtGui][QFont] QFont now serializes its data properly,
without any data loss.

Task-number: QTBUG-22814
Task-number: QTBUG-22946

Change-Id: I34e61b10662b7ad6c57054dacc7e1f522f5b5c5d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
2014-03-31 17:45:47 +02:00
Samuel Gaist
35a11d6fce OS X QSettings auto test/writing check update
This patch aims to provide an updated test that follows changes started
in 10.7: new rule is that only root can access SystemScope settings. It
also disables the sync() workaround code path which is at least not
executed during the tst_QSettings execution and returns wrong value to
the test.

From Apple's documentation:
"Note that modification of some preferences domains (those not
belonging to the “Current User”) requires root privileges (or Admin
privileges prior to OS X v10.6)—see Authorization Services Programming
Guide for information on how to gain suitable privileges"

https://developer.apple.com/library/mac/documentation/CoreFoundation/Reference/CFPreferencesUtils/Reference/reference.html

[ChangeLog][QtCore][QSettings] QSettings now returns the correct value
for isWritable() when using SystemScope settings.

Task-number: QTBUG-9824
Task-number: QTBUG-21062
Task-number: QTBUG-22745

Change-Id: Ib6a1490ec596b99d189ec4de9a0f28ecfd684172
Reviewed-by: Liang Qi <liang.qi@digia.com>
2014-03-31 12:12:21 +02:00
Erik Verbruggen
dd453adbe7 Mac: make FSEvents-based QFileSystemWatcherEngine more robust.
- Record the last event ID with every callback. This event ID is passed
to FSEventStreamCreate when restarting the stream, so the watcher will
receive all events that occurred since invalidating the previous stream.

- Never start with kFSEventStreamEventIdSinceNow, because this will
generate a (bogus) soft-assert in FSEventStreamFlushSync in CarbonCore
when no event occurred since stream creation. The last globally
generated event ID is used instead to simulate the "now".

- Do not dispose and recreate the stream in the callback, but use a
queued signal-slot connection to schedule this on thread that owns the
watcher.

Change-Id: I02f5a845d9e27f9853ed97925ab9c7a5bc0dede1
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
2014-03-27 17:51:21 +01:00
Friedemann Kleint
9a9feab102 Check for administrative rights in tst_qsettings.
Introduce function checking whether the system settings in
native format can be written to. If not, default to user scope or
skip the respective tests instead of failing.

Task-number: QTBUG-37822
Change-Id: I330aff9b79bb22254216f022af807e010bc8e8ba
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
2014-03-27 17:51:21 +01:00
Sergio Ahumada
eab7efd1ee Stabilize tst_QProcess::softExitInSlots()
This test takes more than 5000ms to finish some times, so waiting
for 10000ms should be enough to make it more stable on all
platforms.

  ../tst_qprocess.cpp:1072 :: [gui app]
  QTestLib: This test case check ("proc.waitedForFinished") failed because the requested timeout (5000 ms) was too short, 6150 ms would have been sufficient this time.

Change-Id: I266ad0e65bf3c84e73b7ca6543dc15335dad4c99
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
2014-03-27 08:21:23 +01:00
Frederik Gladhorn
3b5c0bc078 Merge remote-tracking branch 'origin/stable' into dev
Conflicts:
	src/gui/image/qjpeghandler.cpp

Change-Id: I9db3acea7d5c82f5da679c8eaeb29431136665f0
2014-03-24 16:10:15 +01:00