QQuaternion::conjugate() was deprecated with 5.5 and replaced by
QQuaternion::conjugated().
Change-Id: I0176e3db82e9ad793f60e1034a22b11832c8c44d
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
From Qt 5.7 -> examples are lisenced under BSD license, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new BSD header instead of LGPL21 one
(in those files which will be under BSD)
Change-Id: I3ad61caaf07802eb9da7d29eca3fe49d8a51b6a8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Including math.h can pollute the default namespace, and break
some compilers if cmath versions of the method are declared as using.
Switching to C++ math functions also greatly simplifies handling of
float qreal as C++ automatically chooses the right method.
[ChangeLog][QtCore][QtMath] qmath.h no longer includes math.h, so any
sources depending on that indirect inclusion may fail to build.
Change-Id: I4d0e331dafba354ec05dc5052e61ef4ff8d387fe
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Updated those .qdoc files to refer to the new relative examples
emplacement. Images and snippets to be moved later.
Also grouped all widgets related examples under widgets.
Change-Id: Ib29696e2d8948524537f53e8dda88f9ee26a597f
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
