We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our tls certificate/key are a bit on the old side and need to be
updated. But for now let's lower the openssl level. In this case openssl
complains about the server's key used for DHE being too short.
Task-number: QTBUG-86187
Change-Id: I142a7d52f7599f60b8f4f3ff3ac5ce61fed06b4c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qmake parser of pro2cmake handles completely commented lines to make
assignments like this work:
SUBDIRS = \
foo \
# bar \
bar
However, assignments like
SUBDIRS = \
foo \
#bar \
bar
were cut off at the commented line.
Fix this by allowing leading whitespace for "fully commented lines".
Change-Id: Ib5de850a02fd9b9ebb7c056c2f64f9d684334b08
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QBindingStorage is a class that can store a set of binding objects
for the properties of a QObject. This will get used to reduce the
memory overhead of the property system when adding bindable properties
to QObject based classes.
The binding storage has a pointer to the TLS entry containing the
currently evaluating binding. Like that we avoid repeated TLS
lookups and reduce the overhead of the property system to one
pointer lookup and one compare for the case that properties
aren't being used.
Each QObject now owns one binding storage object, that can be used to
store binding data for properties that members of the QObject.
Change-Id: I27427c03c2ba281f072e074be96147bdbcaac246
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a signal/slot connection is activated, a lock on the receiver
object is taken (to be sure it doesn't get destroyed).
The path for blocking queued connections however took the lock on
the sender by accident, fix that.
Pick-to: 5.15 5.12
Change-Id: I8cd938a50eca2bf71e7bfb86768ee0c8431afdfa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
warning: all paths through this function will call itself [-Winfinite-recursion]
Change-Id: I70008710a7448ffd532bb6c3acb488fe439cb807
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test explicitly asks for a non-native file dialog, which works on
macOS as well.
Change-Id: I964c6d98501b4207c2b6c2ce1df39f654c801a43
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This doesn't give useful defaults on all platforms; icon themes are not
provided on platforms other than Linux, and the mime database doesn't
always return user-friendly names based on file names.
However, both icon themes and the mime database can be customized by
application developers by shipping a data file side-by-side with the
application, without the need for reimplementing the provider class.
Change-Id: Ie4b18ac1b861e2da64f01d1f209986b27fbe6bd5
Task-number: QTBUG-66177
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As this class is a subject of the library hook data, there must be a
solid understanding of the member's alignment and padding across
different architectures. By reordering the layout, this patch provides
a clearer way of adding new members to the class.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: Ied8b69bdeb9da50ff05aba2107bc75509674b18e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no need to generate wrapper functions for equals,
lessThan or debugStream for pointer types, as those can
easily be handled by a few lines of code in QMetaType itself.
Change-Id: If79b3bc3a629249c1d17c9e592202f08b59f80ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It works as follows:
- user calls write(const QByteArray &);
- this function keeps a pointer to the chunk and calls a regular
write(data, len);
- write(data, len) calls a virtual writeData();
- subclass calls a new QIODevicePrivate::write();
- QIODevicePrivate::write() makes a shallow copy of
the byte array.
Proposed solution is fully compatible with existing subclasses.
By replacing a call to d->writeBuffer.append() with d->write(),
subclasses can improve their performance.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: I24713386cc74a9f37e5223c617e4b1ba97f968dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's disabled in qmake too, due to being almost all blacklisted
and flaky. Plus locally when i tested, i had to give accessibility
permissions manually, otherwise it failed.
Change-Id: I55ce7a81c46ac28f41c43f5c159fecc22d489966
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We now assume that source code is encoded in UTF-8 by default on
all platforms (and verify this with an auto test). Provide
a CONFIG+=no_utf8_source option for backwards compatibility.
[ChangeLog][qmake] qmake will tell the compiler that source code is
encoded in utf-8 by default. This mainly has an effect on Windows, where
MSVC still assumes source code is encoded in the current ANSI code page.
Use CONFIG+=no_utf8_source to get back the Qt 5 behavior.
Change-Id: I6dcafcaeefdea7d3907ccb723aeb7d23ccc0f04f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and do a local code cleanup:
- add override
- port from foreach to C++11 ranged for loop
- remove dead code (`gestureEvent` (née event) was already
dereferenced when we check it for null'ness, so it cannot be
nullptr, so the condition is always true).
Pick-to: 5.15
Change-Id: Ica5e34fbe65c95f6573630f188582b90be15c8f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleaning up those that are trivial to remove because they have direct
replacements.
Change-Id: I4f5c25884a01474fa2db8b369f0d883bd21edd5b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When drawing multiple distinct (unconnected) lines (e.g. from
QPainter::drawLines() or a QPainterPath with alternating
movetos/linetos), the dash pattern should not continue from one to the
next, as it should when drawing a connected line (e.g. polyline).
Both the cosmetic stroker and the full stroker does it right, but the
fast rasterizing codepath got it wrong.
Fixes: QTBUG-83048
Change-Id: I3d090f7121726755a0e53cb66b99a5563ac0e1c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
