Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This should allow us to make the rest of 14.04 enforcing
Change-Id: I37f6751e8b966b047d1bd2e49ba9482e5846acb1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
On some platforms show() may result in the window being shown full
screen, depending on the defaultWindowState of the platform. If
that's the case, the resulting window size does not follow
the requested size (though the internal normal geometry should).
We need to use showNormal, so that we guarantee that the window
state is WindowNoState.
Change-Id: Ied080eaca13d759501ea292b5e6b2df4e3b32426
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Currently Qt uses the QPlatformIntegration::StyleHint
SynthesizeMouseFromTouchEvents to check whether to synthesize mouse
events from touch events. But not only platform plugins can produce
touch events, they can be created by e.g. QTest::touchEvent() and in
this case we almost definitely need synthesizing regardless of the
platform.
This commit introduces a QTouchDevice::MouseEmulation capability which
replaces use of the QPlatformIntegration::SynthesizeMouseFromTouchEvents.
So it's possible to pass QTouchDevice without this capability to
QTest::touchEvent() and be sure that mouse events will be synthesized.
Notice that touch pads always emulate mouse events.
As a result we can activate some tests which were disabled for specific
platform configurations by commits 6c1670d8c2
and e9760f1559.
Change-Id: Idc82fa4007a095fc1cb5934979361b0023d2b793
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
We must do something when requestUpdate() is called on a QWidgetWindow.
The semantics of UpdateRequest for QWindow and QWidget are unfortunately
different: for widgets an UpdateRequest means "sync the backing store".
For QWindow it also involves marking as dirty.
Change-Id: Idf40b3fc0873652dc081edeb12c96b3007a126ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The test still fails sporadically at a new place, so this adds some
debug information when it fails to may help us identify what is going
wrong.
Change-Id: Ife0f171299ef7e800a2d808602e76ca2f3885964
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The part of the test that verifies that setFramePosition moves the window
successfully appears to be very unreliable in the CI system. The "tested"
frame position is calculated to be at (40, 40) relative to the top left
of the available screen geometry, which can be non-zero due to task bars
and similar system ui elements. However that position appears to be
unreliable in the sense that the window manager doesn't seem to always
respect that. So instead let's try placing the window (by frame position)
in the center of the screen instead.
Change-Id: I96fe6c37e748fc18262632b5effe5a9e90dc0028
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Don't check for absolute counts of resize events but just check if we
were resized. Also use QTest::qWaitForWindowExposed instead of QTRY_COMPARE
and checking for QEvent::Expose.
Change-Id: Ie383493a8ce6d88cad50bd6375d432ad1578449c
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
These synchronously delivered events allow applications to correctly
and conveniently handle native platform surfaces being destroyed. This
is particularly useful when doing rendering on a non-gui thread as it
allows to shutdown rendering before the native surface gets destroyed
from under us.
Task-number: QTBUG-42476
Task-number: QTBUG-42483
Change-Id: I63f41bbdb32f281d0f3b8ec2537eb2b0361f3bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
In some CI configurations this fails from time to time. Have to disable
it unless we can make it more robust somehow.
Change-Id: Iadd8904d7223a6aeff53dafa36b94df3f60e1ad8
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
QExposeEvent::region() reports a region in a random coordinate system.
The behavior is undocumented and the platform plugins do different things.
xcb, offscreen and ios are correct. These set the region in local coordinates,
which is the most logical interpretation of the expose region.
windows is almost correct, except for one occurrence.
cocoa and others need changes: passing in geometry() as the exposed region is
always wrong.
The patch documents the expected behavior both for QExposeEvent and
internally in QWindowSystemInterface. The problematic plugins are fixed to
use local coordinates.
Task-number: QTBUG-40470
Change-Id: I6ded3154d14254fa71d4292d8e1b5e6cf696c81a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test window size; move windows relative
to the top left point of the available screen geometry.
The test now passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: Ia8d992f2a9bfa1cb1deacaf918ed0cfff7616959
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Use SetWindowPlacement() to set the normal position when applicable
as is done in Qt 4.
Task-number: QTBUG-39544
Change-Id: Ia158b968ea15361d9937619f07b56eb8a0312a13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
beginModalSessionForWindow will center the window and ignore
the set geometry. So to workaround this it checks the new value
against the old one and moves it back if need be.
Change-Id: I38bc74c04138992f2e0570fca666414025aeeba8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
On QNX a actual platform window is not created unless the window is explicitly
postet (raster) or a swapBuffers (opengl) is executed.
Change-Id: Ia06b97ea1a477d59e78d74d895c5d6ba6dd86edf
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
QQuickWindow depends on maintaining state of known touch points
between events, so it needs to be notified when it will not be
receiving the corresponding release event for one or more.
This temporary fix needs to be reverted when we have a proper
event forwarding solution.
Task-number: QTBUG-37371
Change-Id: I5dc40af6feac425be8103c1586f8ebe3a6aad20d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If width was specified, but not height (or vice versa) the actual
window size was not as expected:
* The window width was not the width specified.
* The window height became 0.
This was unexpected, since if both width and height was not specified
it would fallback to becoming 160x160 (on Windows).
However, with the advent of https://codereview.qt-project.org/71999
both width and height might receive sensible defaults based on the
content of the ApplicationWindow, which would mean that it might be
reasonable to expect that you only need to specify one size component
of the window.
This also fixes an assertion in file
..\..\..\3rdparty\angle\src\libGLESv2\renderer\SwapChain9.cpp, line 81
The assertion happened when a window was created with 0 height (but
valid width), and then its height got increased, causing it to become
visible.
Change-Id: Ia9e730418e35d679907bdcc59b00c3c988216c32
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
* Fix QCocoaWindow::setGeometry() to respect WindowFrameInclusive
* Support fake fullscreen on 10.6 or WindowFullscreenButtonHint was not set on
10.7 and later
* Fix tst_qwindow on 10.6 and later
Task-number: QTBUG-23059
Task-number: QTBUG-34629
Change-Id: I6e032ca55b45674388b00506a424d3bd7ece429f
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We don't want platform behavior for whether or not maximized/fullscreen
windows can be resized to affect the test for resize event propagation.
Change-Id: I8c118733ca5d2553aacf24d0b8debeb1a4e27103
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
qWaitForWindowActive waits until the timeout for the window to receive
a non-0x0 position, even when it's active, just in case the WM sets
the position as a response to focus-in.
Change-Id: I748cce2747f406a8cdff556465175f02675fcd13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
The QWindow::resizeEvent documentation states that resizeEvent
is invoked after the windowing system has acknowledged a
setGeometry() or resize() request.
The Cocoa plugin however did set the platform window geometry
immediately so that the qnsview's updateGeometry returned too
early.
Task-number: QTBUG-32706
Change-Id: I1f359ab368833d174ab6740f4467b0848c290f13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It seems like the left-side menu bar on Ubuntu 12.04 causes some
problems when it is not automatically hidden, which is the case
in the CI machines.
Task-number: QTBUG-31995
Change-Id: I01ff3fe4c09d720b2dd53037c42e59679d8570dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It is better to mark a test as XFAIL so we get an error whenever
it gets fixed.
Task-number: QTBUG-23059
Change-Id: I0f2f491645c261bf0e735dde6a16d8e90e0b17a0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Some tests assume that QWindow::show() behaves like
QWindow::showNormal(), which is not true for platforms in which the show is
fullscreen, forcing QWindow::showNormal() to be explicitly called.
Change-Id: Ib5f23a4d01bc6a3a2973f57488996c8c198c45f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
In QGuiApplication only Qt::AA_SynthesizeMouseForUnhandledTouchEvents
is taken into account when synthesizing mouse from touch events, in
QApplication only the PlatformIntegration syle hint
QPlatformIntegration::SynthesizeMouseFromTouchEvents.
With this patch both attributes are checked. Furthermore the check was
moved out of translateTouchToMouse in QApplication in order not to
influence the result which is returned to the user, when mouse events
are not be synthesized.
Change-Id: I87ac7299f0a9fbf0a083eff9c547f0dbfab75dfb
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Abbreviated properties are to be avoided. But all 3 of these
properties are redundant from the QML perspective; and because QRect,
QPoint and QSize are (wisely) not QObjects, it's not possible to bind
to _their_ properties, which make these QWindow properties less useful
than users might assume that they are.
Change-Id: I19c00b54b1d2712f9418e8bcf56e35a8008b89ef
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
