Initialize directory delayed in shared code and add checks to verify
that it is valid. Close attached / cloned databases to prevent locks
on files and leaking temporary directories caused by SQLite:
QTemporaryDir: Unable to remove "...\Temp\tst_qsqldatabase-P1XkOA" most likely due to the presence of read-only files.
QTemporaryDir: Unable to remove "...\Temp\tst_qsqltablemodel-P1XkOA" most likely due to the presence of read-only files.
QWARN : tst_QSql::concurrentAccess() QTemporaryDir: Unable to remove "...\Temp\tst_qsql-l0VAKJ" most likely due to the presence of read-only files.
Change-Id: If85bbaed04bb1a32e427d642be332996d967f796
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adapt the stringification code, that is used to produce the
keys for QSqlQuery::boundValues() return value, to keep the
right order of the binding values.
Task-number: QTBUG-12186
Change-Id: Ic11a455bfd9ffd1418b1b021ce5cf78cae9b4504
[ChangeLog][QtSql] Fixed the order of values with positional binding in a QSqlQuery
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Each model test gets its own temporary directory, thus there is no problem parallelizing them.
This should reduce the time spent for a testrun of qtbase by around 3 minutes.
When running only the sql tests it saves less since there are no other tests to run in parallel.
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 43 seconds
Serial tests: 4 minutes 42 seconds
Parallel tests: 1 second
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 second
=== Totals: 12 tests, 12 passes ================================================
After:
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 7 seconds
Serial tests: 50 seconds
Parallel tests: 3 minutes 17 seconds
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 minute 23 seconds
=== Totals: 12 tests, 12 passes ================================================
Change-Id: I355ceed62fae852ad8cd442848e263438afb738e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some database systems (like PostgreSQL) use alphanumeric error codes.
Introduce a new method nativeErrorCode() which replaces number().
If the error code cannot be converted to int, number() will return 0.
Task-number: QTBUG-142
Change-Id: Ic7fba841737674b75c0c01c2263f51d2041da497
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Introduce isNull overload to take field name as a parameter.
This is corresponding to the commit
7e6e141234
Change-Id: I122f79707d26eaa09c2f38dc31aeee1dac7de33b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the method returns true if there is not such field.
Change-Id: I25db8de4561d3e0604f3e64edc1810140ba4aad2
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This removes some XFAILS that were no longer correct and
fixes some existing problems in the tests where ODBC is
concerned.
Change-Id: I91de526bb50ad4046ba07ddb5336aa3714966687
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Oracle has a limitation of 30 characters for a tablename so the main
change is to account for this, which meant changing all the usages of
qTableName(). Some other fixes are included that ensure the tests are
working correctly as far as Oracle is concerned.
Change-Id: I8ad8a5a33e6a70fcad235f6a7e82e91687b74fee
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
By moving it to QSqlDriverPrivate we make it easier to check what
database is actually connected which is particularly useful for the
autotests.
Change-Id: I54d1c2c998919c1d54efb1b6ac9303070ece54aa
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The QODBCResult::exec() returns false when query is an delete
with no data do delete caused by SQLExecute function returning
SQL_NO_DATA, but the false return means error on execution.
Task-number: QTBUG-10569
Change-Id: I6c7ebadcf62ab404b60c7bcccdab6a10bf16a923
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Parsing for bound SQL parameters now handles identifier quoting using
double quotes (") and square brackets ([]).
The following has only 1 bound value but previously 2 were detected:
SELECT 1 AS "A?b[?']]]de?ghi", ?
Task-number: QTBUG-27159
Change-Id: Icfd02187e1126ff3b5ed11df8d4e599f574e61bf
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Some things needed to be corrected for testing with PSQL, this was
checked against the the PostgreSQL documentation to confirm that the
exepected behaviour is correct.
Change-Id: I45a6b343e9eb920fcae2a62910ecc956abcac0f0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change-Id: Ib05a120db16f65d9833663445c028971d4de3d29
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The error and message handlers used by the freetds library were getting
reset to back to the default every time a database was opened. The
Qt TDS SQL driver was calling dbinit() from QTDSDriver::open(). This
had two problems:
1. dbinit() would reset the error handler previously set by a call to
dberrhandle(). A db error would then cause the application to
abort.
2. freetds expects dbinit() and dbexit() to be called symmetrically.
Opening multiple database connections would result in freetds not
cleaning up on application close.
Solved by moving the dbinit() call into the QTDSDriver constructor.
Change-Id: I59018d83238672c903b96a4d7f3f21b664c3ff4c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
MYSQL_TYPE_TINY should be used for binding bool input value.
MYSQL_TYPE_LONG might be too big for bool, resulting in bools being
saved in the database as int 127. The problem was not specific to
the vendor's BOOL column type.
http://dev.mysql.com/doc/refman/5.0/en/numeric-type-overview.htmlhttp://dev.mysql.com/doc/refman/5.0/en/c-api-prepared-statement-type-codes.html
Added generic autotest to make sure that binding bool works. All
drivers should pass this test.
Task-number: QTBUG-27763
Change-Id: I4e69f8e3b32fffb702ec9fa8a80ff5c50dea954b
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Introduce value overload to take field name as a parameter.
This allows for terser application code that avoids explicit
calls to QSqlRecord::value().
Change-Id: I02b6712cd5ec41633b902714315b5716c17d1a9b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ie395d82d17710683968d006d22de313ef49dc6e5
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
SQL Server 10 introduced stricter rules for TIMESTAMP validation,
making it necessary to specify the decimal digits.
Other databases might do the same as well, so this patch introduces
a check for the TIMESTAMP column size and adjusts the decimal digits
parameter as needed.
Task-number: QTBUG-2192
Change-Id: If6d798c6c928ebda75bc474e49a07fbbfbe5816c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
