The ARGB32PM code-path doesn't have enough precision to accurately
render ARGB32 images, but the RGB64 code-path does. Since this is
already a slow configuration and the most costly part is the conversion
we can switch to the more accurate code-path for little cost.
Task-number: QTBUG-55720
Change-Id: Ifa0afba8d8cc0c2f699bb91f51726f4ee5228f3e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
lumping together all kinds of unrelated stuff has caused problems with
spurious dependencies from the beginning. as the modularization infra is
now in a state which supports many small private libraries just fine,
take advantage of it.
Change-Id: Ic40f47ce76a308bbfd32deae281f6f064fe1ef4c
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also bump minimum required Qt version for Android: Ministro updates.
Conflicts:
src/android/java/src/org/qtproject/qt5/android/bindings/QtActivityLoader.java
src/android/java/src/org/qtproject/qt5/android/bindings/QtLoader.java
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: I966f249bebf92da37bfdeb995ad21b027eb03301
It is already blacklisted for 10.8 and 10.9, and is now failing on 10.11
blocking integration.
Change-Id: I71b8119ab32ec64096bfc53d5e521714ad4ae11b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds two formats that does not have optimized code-paths in qdrawhelper
to ensure the generic path has coverage.
This has already uncovered one bug fixed before this patch could go in.
Change-Id: I0e0a1a873555b27f6438f69a76982b8e06263dcf
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Earlier versions of the compiler cannot default
move special member functions, even though we
also define Q_COMPILER_RVALUE_REFS for them.
Fix by retracting the less-often-used of the
two compiler feature defines.
Q_COMPILER_DEFAULT_MEMBERS is not used outside
QtBase in neither 5.6 nor 5.7 (5.8 is not
released at this time, so wasn't considered).
The same is true of the dependent macros
Q_COMPILER_DEFAULT_DELETE_MEMBERS and
Q_DECL_EQ_DEFAULT.
In QtBase, the three uses are:
1. in QAtomic*, where the user also requires
Q_COMPILER_CONSTEXPR, which is not defined
for any MSVC at this time,
2. for QEnableSharedFromThis, which is a class
template with an alternative {} implementa-
tion of the default constructor, and uncon-
ditional user-defined copy special member
functions.
3. The test of the corresponding functionality
in tst_compiler, which this commit amends.
That means that neither of these two only uses
of the macro in Qt libraries are affected by
the change.
The reason we do this change, then, is that in
the future, we want to be able to more easily
restore move special member functions for
classes for which they are suppressed due to
user-defined dtors or copy special member
functions.
Change-Id: I6f88cad66d6b87a758231f16355c3bddae697b86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
If it hasn't been ported to QNetworkAccessManager until now, it probably
doesn't add much value, so remove.
Found while looking for remaining QUrlInfo users.
Task-number: QTBUG-19452
Change-Id: I842f2cbd3ed4770096b06415f0c8b9fd8f1965c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Richard J. Moore <rich@kde.org>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Widgets module is no longer required. Removing it allows this test to
be run with a qtbase configured with -no-widgets, which saves
compilation time.
Change-Id: Id99d3f25cd7b227aa81e1cf1ac7b6fd5227ac4c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
A new define for better vectorized compositioning had a mistake that
caused some sources to be converted to grayscale when composited.
Added two 10 bit per channel formats to the lancelot test to catch
regressions in the future.
Change-Id: I1c468e6b93d68185e517fc0d44c6c927f9f7135f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
There was a race condition between QObject::disconnect() and
QMetaObject::activate() which can occur if there are multiple
BlockingQueued connections to one signal from different threads and
they connect/disconnect their connections often.
What can happen in this case is:
T1 is in activate() method and T2 is in disconnect() method
T1 T2
locks sender mutex
selects next connection
unlocks sender mutex
locks sender mutex
sets isSlotObject to false
creates QMetaCallEvent derefs connection
posts event
Two things can happen here:
1. Connection can still be valid, but it will have isSlotObject==false
and callFunction will be used instead of slotObj
2. Connection can already be invalid
To fix it mutex unlock should be moved after QMetaCallEvent creation.
Also there is another case, when we don't disconnect but delete the
receiver object. In this case it can already be invalid during
postEvent, so we need to move mutex unlock after postEvent.
Change-Id: I8103798324140ee11de5b4e10906562ba878ff8b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Storing them in a single byte is the first step towards the Short
QDateTime Optimization.
The bump in the "private version" by 10 is to accommodate possible
changes in the Qt 5.7 branch.
Change-Id: Id5480807d25e49e78b79ffff144a59420457bcf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the compiler supports C++11 alignof, let's use it. No point in
perpetuating the use of __alignof__ or __alignof.
There's a fallback implementation in qglobal.h that works even without
compiler extensions. We can't drop it just yet (alignas is not a
required C++11 feature), but at this point I doubt that fallback is used
anywhere anymore.
The tst_compiler test was wrong to use alignof(variable). That's not
permitted by the standard nor would it work with our fallback
implementation. MSVC 2015 enforces this, but ICC, GCC and Clang don't.
Change-Id: Ifea6e497f11a461db432ffff1448abfa86672c63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is not exhaustive, but was enough to discover ICEs.
Change-Id: Ib60be1d298a66b72e3eb9b75ad538f0bf15b5f62
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Simo Fält <simo.falt@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, a tab's text is used as its accessibleName.
When a tab's text is empty, there is no API to set
the tab's accessibleName. The two APIs are added to
set and return the accessibleName property of a tab.
Task-number: QTBUG-46530
Change-Id: Idf88b5f905fe66c6365ea0eeb650e74211db90e1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Some strings were drawn with a different size or scaling than what the
string itself said, causing confusion.
Change-Id: I4b187cba6d467cfa0900576bdf451052baa806e6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Subjects each *.png file that matched grep -law "sRGB" to:
pngcrush -ow -brute -rem allb -reduce
(Two needed -force but did get smaller.)
Change-Id: Ia030f0bc1d3617ba716bcc26677ff919ef58423c
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Math functions are linked in by default on INTEGRITY.
Change-Id: I737ae87c02b2321caca3975f69525731e839d1a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The protocol was originally developed by Canonical, currently supported
by Unity and Plasma.
Adjust some tests to use the non-native menu bar when they require it.
[ChangeLog][XCB / X11] QMenuBar uses the unified D-Bus AppMenu menubar
when the desktop environment supports it.
Change-Id: Iea74b40522573bcc4f70168fe7fa2a49b4f3fc21
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
