It's very hard to test on Android otherwise: Creator isn't cooperating
well enough with Android Studio / SDK manager with where stuff is
installed, qmake doesn't build an apk, and qt-cmake-standalone-test
doesn't work wth Android either.
Renamed the executable to tablet_device_info so it's a bit less
confusing on device launcher UIs.
Task-number: QTBUG-86297
Change-Id: I3bb7f816e43f8df4183be1c0866e228befa9e8d9
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Otherwise characters in right to left languages like Hebrew might
mess up the output.
Change-Id: I8753e7e672159ed515dc6152c3629adf91cfd4a9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QItemDelegate was superseded since Qt4 by QStyledItemDelegate but it
took until Qt6.7 to remove the last occurrences in qtbase.
- remove unused includes / replace with qabstractitemdelegate.h
- replace references in the documentation with QStyledItemDelegate
- adjust the examples and tests to use QStyledItemDelegate
Pick-to: 6.5 6.6
Change-Id: I246755004ce2d01192a726ca0972106c237df0cc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The whole Q_DECLARE_METATYPE part is superfluous in these two examples,
as QVariant works with any type as long as it is copy-constructible.
And QVariant will call the equivalent of qRegisterMetaType, so that
doesn't need to happen, either.
Showing how to integrate the type with qDebug is fine in theory, but
also a repetition of content that can be found in other places.
Given that there isn't much else being shown in these two examples, it's
better to remove them from examples and move them to manual tests.
Some parts of "Custom Type Example" were used as snippets in other
documentations under qtbase/src/corelib. So, they were added in
customtypeexample.cpp file in the snippets folder.
Fixes: QTBUG-117001
Pick-to: 6.6 6.5
Change-Id: I45b16338912e3f7394cbb5169642bd31af32d5e1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
- provide an asset catalog .json file for both Xcode 13 and 14
formats. Apps built against the Xcode 13 SDK are not validated
anymore by the App store, but it's still useful to see how things
were before.
- Xcode 13 required the following icon sizes for a universal iOS app:
60x60@2x, 76x76@2x\~ipad, 167x167, 1024x1024
- Xcode 14 only needs the 1024x1024 one
- icons need to be embedded into the asset catalog starting with iOS
11 according to Apple docs (not sure which Xcode version, but it's
needed for both Xcode 13 and Xcode 14), and they don't have to
manually be copied into the bundle anymore, Xcode takes care of
that when processing the asset catalog
- add an 167x167 icon image for the iPad pro for Xcode 13
- add an 1024x1024 icon image that is required for successful app store
submission and embed it into the asset catalogs
- for Xcode 13, we need to manually specify all the required icon
sizes
- for Xcode 14 we can rely on Xcode to generate the smaller icons from
the big one
- because the icons need to live in the asset catalog folder, remove
unnecessary icons in the appicons folder.
- for the cmake project, make sure the asset catalog compiler generates
the icons by setting the
XCODE_ATTRIBUTE_ASSETCATALOG_COMPILER_APPICON_NAME attribute
qmake does automatically already.
it would be nice if we can do that automatically in a future Qt
version
- remove unused icon references in Info.plist file with Xcode 13
- remove all icon references in Info.plist with Xcode 14, rely on Xcode
to add that info via its generated partial Info.plist file that gets
merged into the main one.
- don't include CMakeLists.txt as a text resource
Amends cf3535fdf2
Pick-to: 6.5 6.6
Task-number: QTBUG-104519
Task-number: QTBUG-110921
Task-number: QTBUG-116784
Change-Id: I0bc556e66647a66bc21402ea62db3374d0970e97
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The value needs to be 'CustomLaunchScreen', not
'CustomLaunchScreen.storyboard', otherwise app store validation will
fail with the following error:
Asset validation failed
Invalid bundle. Because your app supports Multitasking on iPad, you
need to include the CustomLaunchScreen.storyboard launch storyboard
file in you bundle. Use UILaunchScreen instead if the app’s
MinimumOSVersion is 14 or higher and you prefer to configure the
launch screen without storyboards.
This brings the value in line with what we have for the qmake
Info.plist file.
Amends cf3535fdf2
Pick-to: 6.5 6.6
Task-number: QTBUG-104519
Task-number: QTBUG-110921
Task-number: QTBUG-116784
Change-Id: I4e9cc2ed685634544955e967f35fdc426dac0f0c
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
It is required for publishing an app to the app store. Otherwise during
app store validation phase, you get an error:
Asset validation failed
Missing Info.plist value. A value for the Info.plist key
'CFBundleIconName' is missing in the bundle 'foo'. Apps built with
iOS 11 or later SDK must supply app icons in an asset catalog and must
also provide a value for this Info.plist key.
For more information see
http://help.apple.com/xcode/mac/current/#/dev10510b1f7.
Note this is not needed when using Xcode 14.3+ and when one places the
icons into an asset catalog. When processing icons in the asset
catalog, Xcode generates a partial Info.plist file that will contain
the CFBundleIconName key and will merge into the final Info.plist
file.
Amends cf3535fdf2
Pick-to: 6.5 6.6
Task-number: QTBUG-104519
Task-number: QTBUG-110921
Task-number: QTBUG-116784
Change-Id: I53009097cf27b096c72ee9c4bad6aa4286272061
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Simple window with a rotating rectangle that can be
captured using QGraphicsFrameCapture.
Task-number: QTBUG-116146
Change-Id: Ia3b6928e469d926c53260ee40ed5af97dd280c08
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
QWindow::setMask() is not guaranteed to turn the masked out areas
transparent, and it's up to the client to ensure this during
painting.
Pick-to: 6.6
Change-Id: I1155b3ad095152a993532f2290cacb670e20daa7
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The event might come from a partial expose, but we want to
fill the entire bounds of the window, as we're filling with
a gradient.
Pick-to: 6.6
Change-Id: I66cedb160fb0ed06935c06ba2fe5dec9ed468833
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Visualize what's going on with tst_QTextCursor::insertMarkdown() at least.
But this could be expanded for other purposes.
It's also interesting to test drag-and-drop with this. And you can save
the result to any supported text format.
Change-Id: I363c32ff9b1bd7c53c562b08c58de95a69be0aa9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a change-of-zone manual test, based on a bug-report by Felix
Kälberer. This failed: debugging revealed that MS's mktime() doesn't
pick up a change to system zone.
Fixes: QTBUG-83881
Change-Id: I9b86398ef870627a059e269f85a0f5d9d9de284b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Extended linear Display P3 + FP16 is likely the thing to use
on platforms such as VisionOS and iOS (and optionally on macOS)
and perhaps iOS). Enable testing this on macOS with the hdr
manual test.
Change-Id: I67f0bdbadae8c7ebccae7de008f12fd8d9135529
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
All of these fall into the trivial category: loops over (readily made)
const local containers. As such, they cannot possibly depend on the
safety copy that Q_FOREACH performs, so are safe to port as-is to
ranged for loops.
There may be more where these came from, but these were the ones that
stood out as immediately obvious when scanning the 100s of uses in
qtbase, so I preferred to directly fix them over white-listing their
files with QT_NO_FOREACH (which still may be necessary for some files,
as this patch may not port all uses in that file).
Pick-to: 6.6 6.5
Task-nubmber: QTBUG-115839
Change-Id: I7b7893bec8254f902660dac24167113aca855029
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
As a header, it would otherwise make all TUs that include it (with
PCH: all) incompatible with QT_NO_FOREACH.
Without deeper analysis (which economy of time forbids in this case,
given this is just a manual test that's probably run 10 times per
year), and seeing as this is in an event handler, I opted to play it
safe and iterate over a copy (which is exactly what Q_FOREACH
does). Added a comment to indicate it may not be needed.
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: I7db75321dd34888f6dd7a64cccb7462ff35935fa
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In main.cpp, the loop is over a local variable which would be const
were it not for the multi-step initialization that I didn't want to
change. The loop body clearly doesn't modify the container, so port to
ranged for loop with std::as_const().
In printvolumes.cpp, the loop _does_ invoke unknown code (through the
function pointer passed as the second argument), but, as could be
expected, the two users of the function don't pass functions that know
about `volumes`:
- in the tst_QStorageInfo auto-test, an rvalue `volumes` is passed,
so we don't need to analyze the qInfoPrinter function passed there,
as it cannot possibly reference the temporary
- and in main.cpp of the manual test, we just pass printf (which is
technically UB (taking the address of a standard library function),
but I don't care right now).
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: Ibcd10a0e0b3229d8f2a1d98545d8fa6d473a0f75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
"Never use a dynamically-sized container for statically-sized data."
Port the loop from Q_FOREACH (which can't deal with arrays) to ranged
for (which can).
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: Ib89d07fb751e3905a230ee5641e2e509e9415bed
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The Q_FOREACH is in a header, so we need to port away from it,
otherwise it makes any TU that includes it (in PCH builds: all)
incompatible with QT_NO_FOREACH.
This is a trivial case of marking the local constructor const, but go
a step further and replace the QList with a C array ("never use a
dynamically-sized container for statically-sized data"). Both
consumers of the container (after s/foreach/for/) can deal with array.
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: I142e438dcf2d785bb34022a3fb1ff46b8eaa0edd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
For the child windows we have to use showNormal() explicitly,
as the default window state logic of platforms like iOS does
not have access to the QWindow, only to its flags, and we
can not use Qt::SubWindow as a proxy for being a child window,
as that's a window flag meant to be used for MDI sub windows.
Pick-to: 6.6
Change-Id: I2b5e669f6180ffdcb75479dece38ae5e5430aef6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
...while sharing the related code between the d3d backends.
The isHardCodedDefaults flag is not used in practice and is
now removed. Add the luminance behavior and SDR white level
(for Windows) to help creating portable 2D/3D renderers that
composite SDR and HDR content. (sadly the Windows HDR and Apple
EDR behavior is different, as usual)
The new test application is expected to run with the command-line
argument "scrgb" or "sdr". It allows seeing SDR content correction
(on Windows) in action, and has some simple HDR 3D content with
a basic, optional tonemapper. Also shows the platform-dependent
HDR-related screen info. With some helpful tooltips even.
Additionally, it needs a .hdr file after the 'file' argument.
The usual -d, -D, -v, etc. arguments apply to select the 3D API.
For example, to run with D3D12 in HDR mode:
hdr -D scrgb file image.hdr
The same in non-HDR mode:
hdr -D sdr file image.hdr
Change-Id: I7fdfc7054cc0352bc99398fc1c7b1e2f0874421f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This is done in anticipation of another test for dragging
Change-Id: I56961eb1d16a4a6b6c58890c9c882dea813dfa08
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Use qwasmwindow_harness_entry instead of the old createQtAppInstance.
Change-Id: I381dd43d9144fe70f055c19db4cd95f90313883b
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
onExit is called whenever the application exits, i.e.
when the app canvas should no longer be displayed and
the loader/embedder code should take some action.
Emscripten provides two callbacks which can be used
here:
- onExit, called when the app exits (but see EXIT_RUNTIME)
- onAbort, called on abort errors.
These map to the two cases Qt's onExit supports. onExit
is not called when EXIT_RUNTIME is disabled, which means
we don't need the special case for exit code 0.
In addition call onExit on any exception. The second
call to showUi() in html_shell.html is then not needed
any more and we avoid duplicating the UI state handling
in user code.
Update the qtloader_integration test to handle changes in
behavior (we no longer set the error text on exit). Use
emscripten_force_exit() to simulate application exit -
using this function makes Emscripten call onExit even
when EXIT_RUNTIME is disabled.
Pick-to: 6.6
Change-Id: I72b5463c1836e8d5054e594abbd304fbc67032b7
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Add support for downloading files from the web server
to the in-memory file system at application load time.
See included documentation for usage.
This preload functionality is different from Emscripten's
--preload-file and --embed-file in that the files are
not packed to a single data file or embedded in the
JavaScript runtime. Instead, the files are downloaded
individually from the web server, which means that they
can be cached individually, and also updated individually
without rebuilding the application.
Any file type can be preloaded. The primary use case
(at the moment) is preloading Qt plugins and QML imports.
Pick-to: 6.6
Task-number: QTBUG-63925
Change-Id: I2b71b0d6a2c12ecd3ec58e319c679cd3f6b16631
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
After fixing the data type for D24S8, we can now implement attaching
depth and stencil (with the same texture).
For Metal we need to set a stencil flag correctly.
This allows using D24S8 in the manual test, which is likely the format
that is going to be commonly used when setting up multiview with
Qt Quick.
Fixes: QTBUG-114904
Change-Id: Ife425c6cb3e09bfe40092c841b78f7a93bb6a4cd
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Cannot just do like with other APIs and expose a view of multiple
array layers. The only option is to use the multiview-specific API
and specify layers 0..view_count-1 in the depth texture.
This allows having depth in a multiview render pass with OpenGL.
Note that this does not cover stencil. D24S8 does not work, so
we may need to explore having a dedicated, separate stencil
texture.
Task-number: QTBUG-114896
Change-Id: I06ede1d77fef199148d595a55d144c96dc3cbc9d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...and expand the docs a bit.
Task-number: QTBUG-114896
Change-Id: I969c3aa2fa72a242e275e4b6dd996df20d1cd2ab
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
