Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
the sysroot flags need to be established even before setting up the
spec, because as soon as that happens, toolchain.prf will try to
determine the default paths and cache them.
this also fixes sysroot use in toolchain flag support tests, which run
(somewhat) independently from the toolchain setup.
Task-number: QTBUG-63483
Change-Id: I7be1540e766dac58fb16f63176aa8d2879b51ae0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
instead of pre-resolving them and passing the final LIBS to qmake, pass
raw QMAKE_*_LIBS* assignments and a QMAKE_USE stanza. the immediate
benefit of that is that it centralizes the debug/release lib handling,
which makes build variant overrides available to all libraries, not just
a few selected ones.
note that this removes the CONFIG+=build_all from the test projects.
turns out that this was ineffective to start with, as config tests are
built with an explicit CONFIG-=debug_and_release. we might re-instate it
in a non-broken way later on.
Change-Id: I2117c5b36937e8230bd571dcee83231515cbe30b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add qmake feature and configure option, which optimze the size of static
exectuable. Use for static build.
Enabled via configure --gc-binaries, or CONFIG += gc-binaries in 3rd party
projects.
Change-Id: I3c25b02caaef6a4afc6019afc9c67122dd11696d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It depends on QAbstractItemModel, so we need to switch it off if
itemmodel is unavailable.
Change-Id: I97246767a5e387b7a2cee90c34125a8411ef1c4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We report it in the overview, but left no way of controlling it
Change-Id: I1d31f2e31bb32566f47069c3776e41033ffb1891
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... and make use of it.
it's a logical continuation of the 'arch' term, and will be used also in
qt3d's configure.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I940917d6763842499b18fffd1514c96889a0cc63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and make sure we can build if it's switched off.
Change-Id: I9565a2ce632a861a99e1276f3edf4f0d094b5451
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... and make sure we can compile without it. In particular,
Qt Concurrent depends on QFuture, so we specify it as a condition,
and QtConcurrentException should not depend on future but on
concurrent.
Change-Id: I65b158021cecb19f227554cc8b5df7a139fbfe78
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary for WebEngine at configure time, to be able to query
which of the sanitizers was enabled in order to report unsupported
combinations.
Task-number: QTBUG-64726
Change-Id: I72f8efe4bed3e14114f885bdae16650f1f23b24b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since the x86_simd/main.cpp file already has all the source for each and
every test anyway, just reuse it.
Change-Id: I938b024e38bf4aac9154fffd14f779f450827fb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This has two main benefits:
1) introduces a qmake CONFIG we can use in .pro/.pri/.prf files
2) removes the need to keep an up-to-date list of which compilers
support the feature
The test is implemented as trying to compile every single SIMD test we
currently have, but without passing the -mXXX option. The reason for
trying all of them is that some people may have modified their mkspecs
to add -mXXX options or -march=XXX, which could enable the particular
feature we tried, resulting in a false positive outcome.
Change-Id: I938b024e38bf4aac9154fffd14f7784dc8d1f020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It results in Xcode outputting a warning when debugging:
[app name] was compiled with optimization - stepping may behave oddly;
variables may not be available.
And the warning is correct, debugging is broken in this situation.
Likely caused by Clang treating -Og as -O1:
https://reviews.llvm.org/D24998
Change-Id: I25d6bf1e65c81cc5be92b9847f7d5dd6754a0177
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The feature belongs to qtdeclarative and will be added there.
Change-Id: I2faf89f6caf841958e60efed8ff3882e530f0720
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
only few tests remain, and many of these were mis-classified anyway.
Change-Id: Ic3bc96928a0c79fe77b9ec10e6508d4822f18df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It's a Linux-specific call that was added to the kernel in pre
historical times (before Git). Sqlite3 uses mremap(2) but it has its own
checking. Nothing else in Qt uses this.
Looks like the last user was the QPF font engine, removed in commit
d7e424ee66 almost four years ago. And
that's considering that the QPF font engine wasn't in use since Qt 5.0
because QWS was no more...
Change-Id: Idaa189413f404cffb1eafffd14ceee7488514c1d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
our binary packages come without many sql drivers, because they have
proprietary dependencies we cannot ship. not every user wants to build
all of qt from scratch, so it makes sense to make it possible to
"enrich" the existing installation by compiling just the drivers. to
enable this, the drivers' configuration must be independent. but note
that it's still not possible to configure a single driver - the entire
sqldrivers directory is configured at once.
a side effect of this is that the availability of the sql plugins
cannot be made known with publicFeatures any more, because there is no
associated module pri file to put that information into. that should be
made inconsequential by making qtHaveModule() work for plugins.
Task-number: QTBUG-58372
Change-Id: Ibdebe3199688a57f93cea82dc15623081d1280f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The instruction is "RDRAND", but the feature name, according to GCC, is
RDRND, so I had to change some macros in qsimd_p.h.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5166779137e63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
MinGW 6.3 ships a gold linker that pops up a crash dialog
while running configure tests.
Change-Id: Ib25e30df664779e1ecced0ae37fa1e73e98f95ea
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can't depend on QT_HAS_INCLUDE for such an important functionality in
QtQml, so detect at configure time.
alloca() is not a POSIX function (it apparently first appeared in
Version 32V AT&T UNIX), so the actual header that defines it varies from
system to system. Clearly, if alloca.h exists, that's the one, so we try
it first. On most other systems that don't define it, it's in stdlib.h.
The only exception is Windows, where it's actually defined in malloc.h.
Task-number: QTBUG-59700
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4b2b389a4684e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Commit 0f1b6acab7 added the detection, but
not the reporting in configure's output. This change makes them be
reported alongside F16C.
Change-Id: I27b55fdf514247549455fffd14b1711ca47b1d9a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The configure-time detection (cxx11default) isn't enough if the compiler
can be changed. This is especially necessary if Qt is compiled with a
compiler that defaults to >= C++11 (e.g., GCC 6) and then the user
selects a compiler another compiler (e.g., Clang) via -spec option. In
that case, we'd miss adding the -std=c++11 or -std=gnu++11 option to the
command-line, causing the compilation to fail.
As a nice side-effect, even moc without moc_predefs.h will now get the
__cplusplus setting.
Task-number: QTBUG-58321
Change-Id: I74966ed02f674a7295f8fffd14a8be35da9640e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
