For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Calling cmake --install . only installs a single configuration.
To install both debug and release artifacts, the install
invocation needs to be done for each configuration.
To keep the Coin instruction code simpler, delegate the looping
over configurations to a custom CMake script, and use it in the
Coin instructions.
Replace all cmake --install calls in the instructions with calls
to either call_host_install.yaml or call_target_install.yaml.
The path to the script depends on whether we are building
qtbase or another module. In the former case the script should
be called from the build dir, otherwise from the install dir.
The other distinction is whether the host or target env prefix
needs to be added.
Task-number: QTBUG-80900
Change-Id: Ied4bf739e2b1a2307f22fc79c1cfad746c8cbc44
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And enable the same default when building Qt itself (it's implicit).
Allow opting out on a target-by-target basis, by using the public
qt_disable_utf8_sources() API call.
Change-Id: Ifc19a744d57b96b1c74a6926a0c6628c2a820464
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move QT6_ADD_RESOURCE to Qt6CoreMacros in order to avoid the extra
config file step.
Change-Id: Ib445ca35c648cf344ee8795de8bdddc0f0758972
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Implemented some necessary functionality to generate correct .pri
information, so that qmake can build modules.
Task-number: QTBUG-75666
Change-Id: I63281adfef3d01385928b1d8c4be0b32ac97c4d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Repos like qtshadertools need it when configuring their own
bundled libraries.
Amends 572c03eb7a
Change-Id: I540e99d5bd2938299a10220a1a5e0d97091077b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It has the same kind of signature as file(GENERATE) but
creates the files at configure time rather than generation time.
CMake provides a few ways to generate files
file(WRITE) -> always overrides content
configure_file() -> only overrides if content changes, creates file
at configure time, can only take a file as input
file(GENERATE) -> only overrides if content changes, creats file
at generation time, can take a string or file
as input
Because dealing with an input file is a hassle (need to create one,
make sure it's installed, make sure it's used correctly in the
various build types like super-build, non-prefix-build, etc)
people tend to use file(GENERATE) instead, which can take a string
argument, and is thus easier to use.
Unfortunately that introduces subtle bugs because the
file is created at generation time, but there are existence
checks which are done at configuration time.
Thus qt_configure_file allows creation of files at configure time,
without having to provide an input file. Underneath it uses
configure_file(). Once CMake 3.18 is released, the implementation
can be switched to use file(CONFIGURE).
Change-Id: Ic8f8d88541ef0b25d01af143352c8c9ba390ad5f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Before this patch there were a few ways to build tests
- Configure all tests as part of the repo build
- Configure all tests as part of the repo build, but don't build
tests by default (-DQT_NO_MAKE_TESTS=ON)
- Configure all tests as a standalone project in a separate build
dir using -QT_BUILD_STANDALONE_TESTS=ON
All of the above incur some time overhead due to the necessity
of configuring all tests.
Sometimes you just want to build ONE test (or a few).
To facilitate that use case, a new shell script called
bin/qt-cmake-standalone-test(.bat) can now be used to configure
and build one or more tests.
The script takes one single argument pointing to the desired test
project path and configures a generic template project that sets up
all the necessary Qt CMake private API, afterwards calling
add_subdirectory on the passed in project.
Example
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon
or
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image
After that, simply run 'ninja && ctest' to build and run the test(s).
This is the CMake equivalent of calling qmake on a test .pro file
(or on a tests SUBDIRS .pro file)
There are 3 details worth mentioning.
Due to the add_subdirectory call, the built artifacts will not
be in the top-level build dir, but rather in a nested build_dir.
The script currently can't handle more than one argument
(the path to the project), so you can't pass additional
-DFoo=bar arguments.
If a test uses a 3rd party library (like Threads::Threads)
which was not a public dependency for any of the Qt modules,
configuration will fail saying that the target was not found.
Perhaps we should consider recording these packages when
generating the StandaloneConfig.cmake files.
Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The default Info.plist shipped with CMake lacks an NSPrincipalClass
entry, which is crucial for making macOS apps run in full resolution
on retina screens.
We make sure the file is only picked up on macOS, not iOS and friends,
since those platforms require another principal class. If needed we can
extract the value out as a CMake variable and use the same file for all
Apple platforms. Doing so would assume all keys are single-platform
only, so if that's not the case we need platform-specific files.
We should probably extract the package type out as a variable too,
so that the file can be used for both apps, plugins, and frameworks,
but doing so requires setting up that variable somewhere based on
the target type, which CMake doesn't allow in an easy way.
The file itself is based on the file CMake ships, combined with
keys inherited from Qt's existing plist templates for qmake, and
adjusted to match what Xcode generates by default these days.
Change-Id: I3f5109e5fff63cdbd109a99d4008948d4bd2102b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's needed when building qtdeclarative.
Needs to be copy_or_install to support non-prefix builds as well.
Change-Id: Ied59f6a1f8403be3721a0ad46f5a3b2f569028ca
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka the version of C++ that needs to be supported when compiling
applications that use Qt headers (C++17 at the moment).
Change-Id: I64dec297e8329f31b1d9864f216a95782049ed06
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For this, we have to uninline the separate_debug_info configure test,
because supporting the conversion of this in configurejson2cmake is not
worth the hassle.
Separate debug information can be turned on for a target by calling the
function qt_enable_separate_debug_info. For Qt's shared libraries and
tools separate debug information is generated if the
'separate_debug_info' feature is manually turned on.
Change-Id: Ic2ffc15efef3794dc0aa42f3d853ef6d651a751c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the FindWrap modules checked for hardcoded features
when deciding whether to use a bundled library or not. This proved
not to work correctly because features were not available when
the find modules were processed.
Introduce a new CMake API call that needs to be manually called
after an add_subdirectory call which declares a bundled library.
The call will check for the existence of the bundled target, and will
then set a cache variable QT_USE_BUNDLED_Bundled<TargetName>.
The same variable is written into a FindWrapFooConfigExtra.cmake file
which will be loaded by the appropriate FindWrap module. The module
can that use that variable to decided whether to link against the
bundled library or the system library.
Change-Id: I75e9a4f4e14d88d4490916a79ad12f1ce57891e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A few things are needed to accomplish that:
- the python scripts do not ignore certain system_foo features anymore
(it is a hardcoded list for now just to be safe)
- configurejson2cmake now outputs
qt_find_package(WrapSystemFoo) calls for bundled libraries
(see below)
- the harfbuzz .pro file is modified to accommodate pro2cmake
not being able to correctly parse some conditional scopes
- the freetype .pro file is modified to make sure linking of the
library succeeds without duplicate symbol errors, which qmake
doesn't encounter due to magical exclusion of cpp files that are
included in other cpp files (presumably for include moc_foo.cpp
support)
- feature evaluation for Core, Gui, Network now happens in the
qtbase/src directory, so that bundled libraries can be conditionally
built
- for each bundled library there are now two FindWrap scripts:
- FindWrapSystemFoo which finds an installed library in the system
- FindWrapFoo which either uses the system installed library or
the built bundled one depending on a condition
- projects that intend to use bundled libraries need to link against
WrapFoo::WrapFoo instead of WrapSystemFoo::WrapSystemFoo targets
(this is handled by pro2cmake).
Unfortunately manually added qt_find_package(WrapFoo) calls might
still be needed as is the case for WrapFreetype and others.
- a new cmake/QtFindWrapHelper.cmake file is added that provides
a macro to simplify creation of WrapFoo targets that link against
a bundled or system library. The implementation is fairly ugly
due to CMake macro constraints, but it was deemed better than
copy-pasting a bunch of almost identical code across all
FindWrapFoo.cmake files.
- a qtzlib header-only module is now created when using bundled
zlib, to provide public syncqt created headers for consumers
that need them. These are projects that have
'QT_PRIVATE += zlib-private' in their .pro files
(e.g. qtimageformats, qtlocation, qt3d, etc.)
This is unfortunately needed due to QtNetwork using zlib
types in its private C++ API.
The change includes support for building the following bundled
libraries:
- zlib
- libpng
- libjpeg
- Freetype
- Harfbuzz-ng
- PCRE2
The following 3rd party libraries are still using an old
implementation within the CMake build system, and should be migrated
to the new one in the near future:
- double-conversion
- Old harfbuzz
The are a few libraries that are not yet ported:
- system-sqlite
- systemxcb
- maybe others
Among other things, this change allows building qtbase on Windows
without requiring vcpkg.
Task-number: QTBUG-82167
Change-Id: I35ecea0d832f66c1943c82e618de4a51440971a5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Need to pass additional -Zc:__cplusplus flag when using
MSVC, so that the __cplusplus define has correct values.
Additionally make the option be propagated to consumers of Qt
via the public Platform target, which QtCore links against.
Change-Id: Ie1283c25334b93f993529beb7fb32bdb001627f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Hardcoding "lib" caused build issues and wrong
INTERFACE_INCLUDE_DIRECTORIES paths in generated CMake configuration
files if INSTALL_INCLUDEDIR pointed to a different location.
Contributes to QTBUG-81289
Change-Id: I3276ecbb4bf5df1c0b4c496c0287b4a69586d683
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INSTALL_BINDIR may point to a different location than "bin". In order
to avoid errors when trying to install qtbase, "bin" is replaced with
"INSTALL_BINDIR" where necessary.
Contributes to QTBUG-81289
Change-Id: I1d4f9fb2617547c9b0e44d6690caebb2b6768e2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Linux distributions may want to install mkspecs files into a
different subdir in order to make Qt6 co-installable with
older versions.
Contributes to QTBUG-81289
Change-Id: Ie4a64370d742948d5ca4f2eaed6ea550d2676707
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Christophe Giboudeaux <christophe@krop.fr>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rather than pass the build type in the wrapper, make sure the build
type is a cache var, so it gets picked up when building other repos.
This reverts commit f72ca4cf85.
Change-Id: I5d91ab66249b6c40c5e548b0eec0e467ba0f2ebc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Write out a file with some JSON data to describe a module.
This file contains information on how that module has been built.
Change-Id: I8a604692663cbb7b76b96b97124130e30b822e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the ICC configuration we can't build the qtbase libraries with ICC
and qtdeclarative with gcc, mixing won't work well. On Windows we've
covered this compiler mixing scenario using our toolchain file, but the
ICC case makes it clear that we have to be consistent about caching the
compiler in the toolchain file across platforms.
Change-Id: Iad2005ab00655f902e5f5cea2f0563d790d8aa93
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch moves all of the underlying code for add_qt_resource
into a common reusable snippet for both the Qt build and user projects.
For users, the new API is available under QT5_ADD_RESOURCES. If
outfiles is a CMAKE target we will use the new API, otherwise
we will fall back to the old behavior.
This patch also adds EXTRA_CMAKE_FILES and EXTRA_CMAKE_INCLUDES to
add_qt_module so that module specific cmake files can be installed
and loaded by the module's config.cmake.
The code will be installed under CMAKE_BINARY_DIR/Qt{}CoreResource.cmake
and is injected into Qt{}Core_Config.cmake via the extra cmake includes
passed into add_qt_module.
To make sure it still works with QtBuild, we do the actual generation
of the file from QtBaseGlobalTargets and include the generated file
there as well.
Change-Id: I85fefaa11dde01a6790d23c62d6a64cd157e2617
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the cmake install prefix was added twice during a non-prefix
build, which evaluated to an incorrect path.
Set another absolute dir variable, and use that instead.
Change-Id: I73099510dadc8f401d5a763f21840c9671686c10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Add QtAutoDectect cmake which has routines to handle the vcpkg detection
as well as set up some android configuration parameters. The latter will
contribute towards keeping the cmake configuration commands shorter when
targeting android.
Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Mixing compilers won't work well on Windows, so if qtbase is built using
cl.exe and Ninja and then later cmake is called on another module and
gcc is found in %PATH%, then cmake will prefer that. Let's avoid that.
Change-Id: I8294482939efa6a16e0a4df8df3aeef8243c3657
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to save them in the toolchain file, otherwise we can't compile
anything :)
Change-Id: Ic5c53524fa4aa05d0b3229c2905dff92ca437ec1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Similar to the shell script, this makes it easier to invoke cmake by
just extending your PATH.
Change-Id: I1f83e93c507032f6ecf4838c11d62f49f4d93ed6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to scoping this variable needs to be written into the cache.
Change-Id: I2704fe9ac138210571e0b7acada5eb5c65e265af
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This gets us a step into the direction of convenience that qmake
offered:
* QtBase is configured with a long command line (especially when
cross-compiling)
* Afterwards application developers (or other module builds) can
just use qmake && make
By generating a toolchain file we can capture vcpkg and toolchain
chain-loading and a shell script can take care of providing the prefix
path.
Change-Id: Ided81f5432cab862306f2bea86cfe8e56adf71b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All the other PlatformModuleInternal, PlatformPluginInternal,
PlatformToolInternal target will depend on the common one.
Also add the QT_NO_DEBUG definition when the build type is not Debug.
This fixes the lookup of the Qt platform plugin on macOS, which
uses a "_debug" prefix in the plugin name depending on if the
QT_NO_DEBUG definition is present or not.
This is the same as it is done in mkspecs/features/qt.prf.
Change-Id: I82cf461d44b8a3b3c5dc2b2d9f25baa246fc1e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
Builds fail on Windows, due to splitting on ':' on absolute file paths,
when handling syncqt injections.
Revert for now to get qt6 merge in faster.
This reverts commit 7559d508d1.
Change-Id: If139a8a1eb4ae7ccc8d7b835b12e83b03176e28b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In case of a CMake superbuild, the actual install root in a non-prefix
build is the top-level build directory (not $TOP_BUILDDIR/qtbase anymore).
This is more in line how CMake lays out things by default.
Task-number: QTBUG-75582
Change-Id: I4e1744b5c877508fedc33e237eec28cb7436010b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's already installed right where QtSetup.cmake is installed.
Change-Id: Ie88363ae3878cda8f92aa44160333886f64565d8
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the android deployment settings json for android apk
targets. QtPlatformAndroid is now also deployed as a public
build dependency of QtCore. Some minor refactoring has been
performed to the naming of variables and functions to
better match the public facing apis.
Extra settings for the file can be configured using the
following target properties:
set_target_properties(Core
PROPERTIES QT_ANDROID_DEPLOYMENT_DEPENDENCIES "foo;bar"
QT_ANDROID_EXTRA_LIBS "foo;bar"
QT_ANDROID_EXTRA_PLUGINS "foo;bar"
QT_ANDROID_PACKAGE_SOURCE_DIR "/foo/bar/"
)
The file is generated using the function
qt_android_generate_depoyment_settings().
We need to install the android template files and jar
files during the android build as the androiddeployqt tool
wont work if parts of it are split between the host
install and the android install.
Added QT_BUILD_QT variable to check whether we are building
Qt from source.
Finally, we also force the stdlib to shared via cmake
configuration with -DANDROID_STL="c++_shared"
Change-Id: I063c47e11749d56ba4c6f02101dbcc09e1b9fe87
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Link to them from add_qt_module/plugin/tool
This way we set the warnings_are_errors flags just once
and also non-qtbase modules get them
Change-Id: I2b65a81694aaebdd7c886249f217c11f79492bad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Enable building androiddeployqt when performing host builds only.
Added QtPlatformAndroid.cmake to locate Java and the setup the
android SDK platform when building on android.
Install the androiddeployqt support files when performing a host
build.
Added ANDROID_SDK_ROOT configuration variable for specifying the
android sdk directory.
Generating the deployment-settings.json will be done in another
change.
Change-Id: I1bf15315af4ed904d2fb1d22b0e8e834df32d6ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
