The stepSize property was missing in Qt 4 and is
a sensible addition to the value interface.
Change-Id: I7571800d50ee7e4194c09c4db40300809a1ce45a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is a compile-only test, and it's not even marked as a testcase in
the autotest system.
Change-Id: I9b48ddad3c8e3e953d0e6fcfa010bab73289bc6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
a) Use the new Qt5 OpenGL API for testing of GL painting
b) Simplify: Use the higher-level QBaselineTest API instead
of the low-level baselineprotocol API.
Change-Id: Ib5f47f6fe68837dfdc8dc3a74638c5cb0b724614
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
windowTitle, windowModality, windowIcon and so on are named that way
to be similar to the ones in QWidget. However QQuickWindow inherits
all of the declared properties, and we would like to have shorter
property names in QML. If you are working with a Window then it's
obvious the title property is the window title. Unfortunately,
there must be patches in many other modules which depend on this one.
In order to avoid the need to merge them all at the same time,
there is also patch https://codereview.qt-project.org/#change,39001
which temporarily adds backwards-compatible accessors, which can be
removed after the other modules are able to build without them.
We should not rename windowState to state, because in QML, state
usually drives the state machine for animation transitions etc.
(although QWindow is not an Item, a user might get confused about it).
Related patches are
https://codereview.qt-project.org/#change,39001https://codereview.qt-project.org/#change,37764https://codereview.qt-project.org/#change,37765https://codereview.qt-project.org/#change,37766https://codereview.qt-project.org/#change,37762
Change-Id: Ie4424ec15fbdef6b29b137f90a2ae33f173edd21
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We don't need to define pi.
Use some clearer names in navigateHierarchy.
Use smart pointers.
Change-Id: I482efe9235a3419f048baede6886d29d46e3057c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Use smart pointers.
Navigation to siblings is long gone.
Change-Id: I81a10633960eefb9738990682734dcfbdd65330c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This seems to be the established practice.
Change-Id: I75a65d722a026ab0eb1805688743f46aba406e6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reference tasks with detailed information of failures rather than generic
task for blacklisted tests.
Task-number: QTBUG-27732
Change-Id: I0f0f500d255ea8748dd98d066deeaf1dfcdb7ec8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
It was probably not implemented because it needed to access
private APIs.
However, accessing those from this a11y plugin is unproblematic.
Forward-ported from Qt 4.8 with change
d2fb64d52fc6ec229d775f829a9a0cb3d251aad3 (and then slightly improved)
Change-Id: Ifa2d48c152fd75fc1fff49a05369787a7db3b902
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Fix those test scripts that assumed cosmetic default pen, and
improve testing coverage of cosmetic vs non-cosmetic pens in general.
Ref. I04d910e9700baf7f13a8aac07a3633014bb9283e
Change-Id: I2bb3525c21a8e9c8dd1f16e7dcd225195df43c1b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Not having access to a network test server is not a failure per se
but rather an enviromental condition not met at run-time.
Change-Id: Ie7d10ca5fbf2df45fb1fd1ac19718c9fae855c03
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QListView::currentChanged and QListView::selectionChanged changed to
use 0-based indexes instead of 1-based indexes.
Change-Id: Ie618970c9a37ec76156dbfab2e86685c3c8f374c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We also made an accessibility auto-test more stable, so that it would
not be influenced by this patch.
Task-number: QTCREATORBUG-7966
Change-Id: I6ce4e2361c8847aee5dd1cf5664c29cd2d83e38d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Remove more unnecessary references to QtWidgets in accessibility
implementation.
Disable accessibility tests (which rely on QtWidgets) when QtWidgets is
not available.
Change-Id: I57315537779d31af1245d42d1b4c49174016da54
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The test was not run so far and chances are that it would block
the CI completely.
So disable it for now, enable it again as soon as breakages have been fixed.
Change-Id: I452c02027b37a604eefbadb253c9a4d5041ef159
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The ftpProxyServer test case is failing constantly in Digia hosted
Qt-Project CI system, especially on Windows machines. Because this
failing autotest is blocking the use of Digia hosted CI system,
it is marked as an insignificant for now.
There is a bug report QTBUG-27571 created to fix the problem.
Change-Id: I196ad76823874dbc85b1f5abbaf020e02b3c410e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The Windows combo animation causes a delay, introduce
QTRY_VERIFY. Fix warnings about being unable to
set geometry on Windows.
Change-Id: I52ca960c06f023ade3afe85f31deaf8e32edff26
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QMetaType has a way to "switch off" some types from the build.
QtMetaTypePrivate::TypeDefinition<T>::IsAvailable is defined as false
for all unaccessible types. Sadly that information was never used by
gui and widget handlers. The patch implements it.
Change-Id: Ie5835be4c88cfbbca8a4e9199e31ddfc20cae190
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jing Bai <jing.bai@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test actually passes using the "xcb" platform and fails otherwise.
Second, the Jira task is misleading since it refers to
tst_QFocusEvent::checkReason_Shortcut()
Change-Id: Icab91ace8c214d958b534c5cebae900242522372
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
QWidget's mapToGlobal() and mapFromGlobal() functions assumed that
if the widget reports it's a window or if it has no parent widget, it
must be a top level window whose coordinates are in global coordinates.
This is not true for child QWindows or embedded native windows
(QAxWidgets).
Changed the logic for mapping coordinates to use equivalent methods
from QWindow if widget has a window handle, and changed QWindow's
methods to map coordinates using native methods if window is embedded.
Also fixed newly failing accessibility autotest. The geometry related
failures there popped up because now the position of the rect returned
by accessible interface is actually correct while widget geometry still
reports position 0,0 before widget has shown up.
Task-number: QTBUG-26436
Change-Id: I658fafd0ce01eb1604ba255efeeba3073ca0189f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
A new class called QAccessibleTextWidget was added.
This class should implement all methods of QAccessibleTextInterface and
QAccessibleEditableTextInterface which only need a QTextCursor, and it
defines two pure virtual methods, to obtain and set the text cursor, so
accessible implementations of widgets which use a text cursor can implement
these two methods.
QAccessibleTextEdit is now a subclass of QAccessibleTextWidget and most of
its methods were moved to QAccessibleTextWidget.
This is a forward port of ba5d7d608cc31fc63354fd74d85a1bad7780fc45 from
Qt 4.8, and is a prerequisite for forward-porting QPlainTextEdit
Change-Id: I6093c4fa7e0a77b84de779479c6074db006efec1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.
Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows building the QVariant tests without the QtWidgets module.
Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When the pushbutton is shown, it will generate both a ShowEvent and
a StateChange with active=1 (because it is a top level window).
This patch relaxes the reqirement in which order events are delivered.
Ideally the order should also relied on, but I'm not sure if that
is feasible due to differences among window managers across all
platforms.
This got provoked by codereview.qt-project.org/#change,26014
Change-Id: I96159fbb1b64f0ca8d13833d8a4c6799c655afc2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Also, remove its subclass QAccessibleSimpleEditableTextInterface
Instead of having the subclass that implements this conveniently,
we move this behaviour over to the bridge. The bridge should
check if role() == EditableText is set, and then it should try to
support the IAccessibleEditableText interface (i.e.
it should accept the calls to replaceText(), deleteText() and
insertText()) and change the text with the following operations:
1. Query the text using QAccessibleTextInterface::text() or by
using QAccessibleInterface::text(QAccessible::Value) as a fallback
2. Do the requested delete/insert/replace manipulation
3. Update the text with setText(QAccessible::Value, newText);
Change-Id: Iee5e41faf14351951e2bfca8c9eac970a113e878
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
While I do like the idea, it currently relies on every
QWidget having QAccessibleWidget as a11y representation.
This crashes for example when using the itemviews and
asking them for relations.
Change-Id: Ie15a78dae620eefb97c646b9e802b13bdf864650
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.
Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test's runtime significantly varies on separate runs on Windows;
runtimes from 10 to 830 seconds have been observed in CI.
Increase the timeout to restore CI stability.
Task-number: QTBUG-26006
Change-Id: Iba153e65264a177d146b2f3647ec6ba529af7135
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Move the iterator classes into QArrayTypedData and add constBegin()
and constEnd() to that class.
I also had to add an operator T*() to the strict iterators, since
there are many places that expect the iterator to behave like a
pointer (including in QVector itself).
Change-Id: Icc5ed56ad47b013664a48eef9d31b5273aecb4e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Remove all references to (un)checkAction.
This commit finalizes the intended change.
Change-Id: I79d3b30b5c3d9fbe276c2c94fed5971bb21d6c02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;
in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too
Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This reverts commit a17523805e56511465550a6a93a88b3fc3c8325a
The compatibility overloads were removed in change Icf108a80177155f21bb73c165fb8ab5d4e997bc2.
Change-Id: I4861f281451d66a1aa5f3525eea1773dfef0540e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant
In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.
Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QObject is no longer exception-safe and there's no one working on
improving this, so let's not block innocent commits because of this
failure.
QObjectPrivate's constructor initialises the
QObjectPrivate::threadData member to null, but the destructor
dereferences it unconditionally (the member is initialised in the
QObject constructor). That means QObjectPrivate is not exception-safe
by any definition and, so, anything depending on QObject is not
exception-safe.
Change-Id: If9d5004630b7ce2fb357e328627794caad67564f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22815
Change-Id: I38445b659235076b00d9dd82d2a824d1caa1439b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22812
Change-Id: I1e1ad63472db7ba724c9936ae718de0b3b078bbd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in the last 400 CI builds.
Change-Id: I22b59565a6a6cb48653bd9b0d967abbf074d59a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Otherwise, the order of updating of the indexes will cause
inconsistent results because it will rely on ordering within a
QHash (which is indeterminate).
Task-number: QTBUG-25325
Change-Id: I7d99578c8ee2954b8562dc5aff7dc32e74d41fb5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QT_NO_STL is now no longer defined, so remove the conditionals and
select the STL side.
Change-Id: Ieedd248ae16e5a128b4ac287f850b3ebc8fb6181
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds checks to ensure Q_ALIGNOF is returning the desired alignment
for explicitly-aligned types.
The alignment check is now inlined in the test inside QCOMPARE so we get
slightly more informative errors:
FAIL! : tst_Collections::alignment() Compared values are not the same
Actual (quintptr(&it.value()) % Value::PreferredAlignment): 64
Expected (quintptr(0)): 0
Loc: [tst_collections.cpp(3384)]
In this case, this is enough to notice "non-native" alignments are being
requested. Having test parameters otherwise hidden in template arguments
doesn't help the situation.
Change-Id: I05267fd25b71f183cfb98fb5b0a7dfd6c28da816
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The intent is to force instantiation of template container classes and
semantics or behaviour are otherwise irrelevant in this context.
tst_collections.cpp:3036:15: warning: inequality comparison result unused
tst_collections.cpp:3037:15: warning: equality comparison result unused
tst_collections.cpp:3100:15: warning: inequality comparison result unused
tst_collections.cpp:3101:15: warning: equality comparison result unused
Change-Id: I70ad38b18dcbc43879e36a34b1da460aee5f7b07
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Commit 5e9089135b had some problems:
* It left out the cast to IServiceProvider in the refactoring of
QueryInterface. This broke IAccessible2.
* It also failed to enable the codepath for MinGW inside wrap(), which
effectively caused MSAA for MinGW to be disabled.
It also adds an autotest to the bridge (finally). It is simple,
but it should help avoiding committing stuff that completely breaks
the bridge.
Change-Id: I459d89c3bdb93e54ddea85872b50fc1dba0fe4a0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Both QWindow and QWidgetWindow should update with the
active state signal.
Change-Id: I0219f803aa0fb109765f0faa0aedb120c2a439f0
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Added a new accessible interface for QGroupBox, as QAccessibleDisplay
is not good enough when the QGroupBox is checkable.
AccessibleFactory was modified to return a QAccessibleGroupBox when
the accessible interface of a QGroupBox is requested.
Created tst_QAccessibility::groupBoxTest
Port to Qt5 of the patch by José Millán Soto <fid@gpul.org>
Change-Id: I6c23dcf5562b3ea269b04102e78463b65827188a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
(cherry picked from commit c03ceb203c65d9e3485fad848bfc0c4b6ee3e9aa)
The bridge can do the mapping to and from screen position.
This is now done in the windows bridge.
Change-Id: I5ca5df0fbeeb58202539f55a0f62717fb1685092
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
QWorkspace had been called Q3Workspace before Qt4.0 finally released.
In a sense, it is a Qt3 support Widget. And QWorkspace has been
deprecated and replaced by QMdiArea at Qt4.3.
Change-Id: Iea1bf831c9960c23c2b21d51fdc7c13b303642ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This completes 6c98fd2, for systems where default codec is not UTF8.
Change-Id: I94795785d5d172558c40c06bd3ef4ffaba1624c5
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The Lancelot raster painting autotest assumed latin1 encoding of the
QPS scripts files, while the script engine would import subscripts
as UTF8. This fix standardizes on UTF8.
Change-Id: I9e7c1ee7b6ffe77ff68edc8423f00dfb9ab3e95b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This makes the api cleaner and generally the child should not be there.
It is only sometimes more convenient not to create a QAccessibleInterface
instance, so the functionallity is kept.
Change-Id: I26018a6d3e0549f4d79856775b4167c5660e229d
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Also make the handling of events in the test pointer
based since mac-g++ doesn't seem to like const
references the way they were before.
Change-Id: I7fe39978d4729b8e586be30978b74aa51ca7cfe6
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
C++11 adds cbegin()/cend() functions for the same reason Qt has
constBegin()/constEnd(). This patch adds these functions to the
Qt containers with the same implementation as constBegin()/constEnd().
It also fixes the return types in the documentation of existing
constFind() functions (documentation only).
C++11 only adds cbegin()/cend() (and crbegin()/crend(), which Qt doesn't have).
In particular, it doesn't add cfind(), so I didn't supply these, even though
Qt comes with constFind().
This is a forward-port of https://qt.gitorious.org/qt/qt/merge_requests/1365.
Change-Id: Ida086b64246b24e25254eafbcb06c8e33388502b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These issues are permitted to go unfixed for ARM and MIPS, for the time
being.
Change-Id: Ibdf33dc42e3de19ef20e9dc50f12f451ea6dbf23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC complained about undefined behaviour when
deleting subclasses of AbstractTester through
pointers to AbstractTester, and it's doing so
correctly...
Change-Id: Ie641281d8aafe32c5c9784e8aa39672ff0b699c7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Subclass QAccessibleEvent to give details what changed in the
state change.
Change-Id: I9005d311e85a3c8bfa6e062833fa6a8a7dc6a4a4
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
In Qt 4 index 0 was the widget itself.
With the cleanup of child index this now changed.
The default constructor uses -1 as parameter to signify that
the widget is the cause, not a child.
Change-Id: I329a1cc91bf2d1d1d8534739acbddfe107f40364
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
headersclean enforces various rules which all Qt headers are supposed to
abide by. It fails compilation if these rules are broken.
These rules should be followed also by modules hosted outside of
qtbase. Split the test up so that it can be easily reused by other
modules.
Change-Id: Icf09cbfde411c926ed87914dc821e6dfc569b0de
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
show() on a window is asynchronous. Wait for it to complete before
continuing with the test.
Change-Id: Icd0daa0c0e8f287171c57708bb2fce0b6cf0906a
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For SSL, this would require an OpenSSL library to be installed.
Change-Id: I2a320e7faf40ef925c90dbe539f912e4a8fc13fc
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reusing a template is much better then creating a new one, even if it
should inline the same code.
For some reason replacing T* by void* force gcc to remove a few bytes
per template instantiation too, it is not really significant, but it
alows us to simplify the code.
Benchmarks don't show any regressions.
Change-Id: I4fdf1e4dc311b23021eb5758605602937d05b183
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code coverage tool adds #line when instrumenting the code using the gcc
syntax.
Since tst_headersclean now uses the -pedantic-errors flag (qtbase commit
7e970eb58c), it causes a fatal error when the code is
instrumented with the coverage tool.
Change-Id: Icb1888d1c1f0a982c0c56aa168e70a76a246a18c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This setting is extremely harmful, as code cannot know whether or not to expect
it. It also made the behaviour of QString::fromAscii and ::toAscii unintuitive,
and caused a lot of people to make mistakes with it.
Change-Id: I2f429fa7ef93bd75bb93a7f64c56db15b7283388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
- no longer needed after test that used it was removed
Change-Id: I63fc8a9db07f9250507becb9bf6c2aefe0fdc254
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The fileLineEndingTest case doesn't test network in any way and it is
conceptually wrong, too, as any tests where line endings are an issue
should be handled with .gitattributes rather than forcing user to
check out the repo with unix line endings.
Task-number: QTBUG-24271
Change-Id: I73986993edc227cb68b8f61d51cc1cf458d20989
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Next step is to remove navigate(), but that has to be done in
qtdeclarative first.
Change-Id: I01ea1386c092446be04cc19d0f70adf53f094adc
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If we request a substring starting at the very end of the string,
QString::mid should return an empty string, not a null string.
For instance, QString("abc").mid(3, 0) used to return a null
one, while this patch makes it return an empty one. The
same thing applies to QString::midRef() and QByteArray::mid().
Change-Id: Ie9efd7a0622d429efd0fb682c19856c19e9469af
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is a source incompatible change for Q_DECLARE_METATYPE(T*),
which now requires T to be fully defined.
The consequences of this are:
* Forward declared types can no longer be declared as a metatype.
(though this is a very uncommon thing to do).
There is a trivial workaround where necessary.
Change-Id: Id74c40088b8c0b466fcd7c55abd616f69acc82c8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change-Id: If805ea762047d07872a278956fc7637e5bafc6db
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These were not used in any bridges, and none of the bridges
(MSAA, Cocoa, AT-SPI/IA2) can hardly make use of this information.
Change-Id: If3cad6b6c1928535dd932f46c9ec6883a4a19c76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This looks like the mac port but isn't any more,
remove it to prevent confusion.
Change-Id: I498f536d77d1a3c53e687f696ca6992539a1a90b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The state should contain useful and clear information.
Some of the old enum/bitfield members were not really clear.
Make them follow Qt terminology and shift the burden of interpreting
them to the bridge.
Apart from the previous commit changing from enum to bitfield, these
flags have changed names:
unavailable -> disabled
mixed -> checkStateMixed
protected -> passwordEdit (in the last commit)
floating is completely removed, even MSAA documentation states it is unsupported.
Some new states have been added.
Documentation added.
Change-Id: I152256e77a061f28ee5780f527524c80a2c7e333
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
It is now the resonsibility of the bridge to support this
(by querying for QAccessibleInterface::rect())
The windows bridge (currently the only bridge in need of this) has
already been updated to reflect this in commit
7dca461620
Change-Id: Ief1339ab6edc118e2d47e3875e09fa885db65c2f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
- Introduce separate state machine class with a timer instead of
using semi-synchronous qWait(). Also invoke closeAllWindows()
repeatedly should the file dialog be slow on Windows.
- Use QTemporaryDir for test data to avoid conflicts with
remains from previous tests.
Change-Id: Ibd95176b44ff20d6f326dc3139fb386472f64c2b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Makes the code nicer and more consistent with the rest of the world.
Change-Id: I5ba0ee39f5b0afd1a079a3cea9990d123955ed3f
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
We would like to add more flags that will be over the 32 bit boundary.
On Windows enums don't seem to digest values >32 bit.
This patch changes the state flags to be a bit field instead.
The windows part of the patch was written by Jan-Arve Sæther.
Change-Id: I2d1d87807f920ce4d4a5c7bfea8b1122ed44eb08
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
These are deprecated in favor of
QAccessibleInterface::child() and QAccessibleInterface::parent()
QAccessible::Sibling can be done with a combination of those two.
This is handled by the bridges, if required.
Change-Id: I2e2a6eb2a982e7c9001a393d69f0c5f1ae9c0970
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Changed these tests to use QFINDTESTDATA macro to detect location of testdata.
Checking for a specific file contained in the testdata so as not to be confused by empty directories
created during configure.
Change-Id: Iac2ac6304b6b9ac79e00886025b93ec0af5a8507
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use correct overload for QTranslator::translate()
- Fix LTR source text
- Use QDir::TempDir correctly (check for slash).
- Do not copy executable on Windows (which is locked), use
arbitrary data instead.
- Use Q_OS_MAC
Task-number: QTBUG-21402
Change-Id: I6ba1c7c764d4c847278eaff9a96c8cd312ac204d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is needed in order to expose the enums to qml.
Do not inherit QAccessible.
Change-Id: I220a0ea3add2d790e4fa6e93ce3deda762859e1a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename the new interface after the old one has been removed.
This interface is very close to the IAccessible2 Table2 interface.
Change-Id: I8659232189fe0e8307151c743727de425c30ac9a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The qobjectperformance test is a kind
of performance test that asserts that the
time it takes to emit a signal to a certain
number of receivers does not exceed a certain
time.
other/ currently seems to be a sensible place for
such a test. Alternatively, it could have been put
next to corelib/kernel/qobject/.
Change-Id: I5c9461b62984f5806d1f6940123d30ef9f9f5a37
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt5 doesn't support MSVC versions before 2008, so workarounds for
earlier versions are no longer required.
Change-Id: I429feff99fe61d286637b960d92fd58962f8aefa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is only valid with obsolete Qt Solutions packages. Any Qt
Solutions that are still of value need to be rewritten as Qt5 addons and
will be delivered with their own unit tests.
Change-Id: I099ef816655cc7de13715f5a4e5f4a06099df2d5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the parent .pro files follow the pattern of listing all tests in
one place and then removing inapplicable tests as needed.
Change-Id: Ide1ae98d50dd63cd8c1b4d6fd53135cdff801bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test attempts to enforce various conventions onto Qt's autotests.
Many of the things enforced by this test became obsolete from Qt4 ->
Qt5 (because Qt5 CI is much less "magic" than Qt4 CI).
The merge of `refactor' branch obsoletes even more.
The remaining valuable part of this test should be moved into the `qtqa'
module as a shared test, because it applies to all modules, not just
qtbase.
Change-Id: I2402bca32e43c597f14b8ff6ca729563ff8efbfe
Reviewed-on: http://codereview.qt-project.org/4926
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The test got moved one level down in the directory tree,
but tries to find the top level directory. Fix paths
to make it work again.
Change-Id: I7b80a1c6891e7f1aa013a89203f651aa3ea932e8
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
