Since 0f1008a593, views record if they
moved the item in the model, and prevent the deletion of the source item
in QAbstractItemView by setting the dropEventMoved private data member.
However, QListView in icon mode is special: it doesn't rearrange the
model, it repositions the icons in the view. While the dropEventMoved
logic was applied to the drag event filter to prevent deletion, the
variable was never set in the filterDropEvent handler. The drop event got
ignored, breaking rearranging of icons.
Fix this by setting the dropEventMoved member in filterDropEvent.
Fixes: QTBUG-94226
Pick-to: 5.15 6.1
Change-Id: I963f5db0f81bcd0d25eef05d9a265be00a5871f6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
In MultiSelection mode, items are by default toggled on press, which
follows the example of standard Windows controls. However, when dragging
is enabled, then the press might be the beginning of a drag'n'drop
operation, and deselecting the item on press breaks the selection and user
experience.
Don't toggle the selection for presses on an already selected item that
might get dragged; instead, wait for the release event.
Extend the test case slightly to cover the special case. Dragging a
selection in a drag-enabled and MultiSelection item view wasn't possible
before either.
Fixes: QTBUG-59888
Change-Id: Ibd3e95a71ea63dd1e9bc3c8a723eafa9a1c21afa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
In ExtendedSelection mode, a Ctrl+Press might be both the start of
a selection toggle, or the start of a Ctrl+Drag operation.
If we already toggle on the press, then it's impossible to drag the
existing selection while the Control key is pressed. Ignore Ctrl+Press
events and let the corresponding release event toggle the selection.
Adjust the relevant test cases accordingly. The QItemDelegate test
case used a click+control event incorrectly, such an event doesn't
change the clicked state and should not be eaten, and now it does
change the selection, so fix the test.
Task-number: QTBUG-59888
Change-Id: Ia76126e31c28bc97d3e93e54965bdb1d0b8ac6a4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously, for locales other than the system locale, no entry was
added to the list for the actual locale whose variants - with and
without likely sub-tags - were being appended. In most cases the
standard name will in fact coincide with the variant without likely
sub-tags, so this was unlikely to cause a problem, but it should be
present regardless.
At the same time, turn tst_QLocale::uiLanguages() into a data-driven
test and add another row to its table.
Change-Id: I5cb2d805d78fc3415d82b169caa6154b0f284708
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously, the augmentation wasn't being applied to the system
locale, due to a mistaken test claiming the locale's name didn't
resemble the string from which it was constructed. The test dates from
before various fixes to likely sub-tag processing that should make it
redundant now. This makes QLocalePrivate::rawName() also redundant
(and its conversion of QLatin1String to QByteArray relied on '\0'
termination which wasn't actually present in the various codes).
Expanded the test of systemLocale() to also test uiLanguages() turns a
single entry into the list we expect; and add two new test-cases.
(The test uses a mock system locale class, making this independent of
the platform backend.)
Fixes: QTBUG-92234
Pick-to: 6.1 5.15
Change-Id: I0cdf6eae152a42dc377f4ea3e62c282ff4be1764
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Once we're in ~QObject, only methods of QObject are still valid.
Notably, no setter of any derived class is still valid. Thus, to be safe
we must no longer react to binding changes of those properties. To
ensure that this happens for QObjectCompatProperty properties, we
explicitly clear the binding storage.
Fixes a particles3d example crash.
Change-Id: I10d2bfa5e96621ce039d751cffaf3ac41893623e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The change in 004e3e0dc2 introduces
Windows junction awareness, though users were still unable to resolve
the junction target. This change adds the ability to solve this.
Fixes: QTBUG-93869
Change-Id: I9f4d4ed87b92e757f7b6d8739e2a61b58c096f63
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Split the code out of QDir::fromNativeSeparator into a separate
reusable function to remove the above-mentioned prefixes. Fixes
and unifies behavior if the prefix was given with slashes instead
of backslashes. Add a couple more test cases.
Fixes: QTBUG-93868
Pick-to: 5.15 6.0 6.1
Change-Id: Ibd94ae283e2fb113f9c2db97475fbc7d89522bbf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
All repositories define QT_NO_INTERNAL_COMPATIBILITY_FUNCTIONS by now,
and we can remove QtCompatibilityHelpers.cmake altogether.
Change-Id: I4d8104246e96a4514d5651c104607d651d208d95
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of relying on some string comparisons and the current knowledge
of which backend supports DTLS, use the proper API we already have in
place to test if a particular class is supported by the active backend.
Change-Id: I58ca0f7b7fcef68ec375cd64b83e51d4335817da
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Covers all selection modes and various combinations of mouse press, click,
drag, with or without modifiers.
Task-number: QTBUG-59888
Change-Id: Ib8ddc319a89649338d55fbc47e5a7ccfed338af9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
After d6551fe125 it was no longer possible to start a drag with a
double click (where the first click selects an item, and the second
press+move starts the drag). Resetting the pressedItem variable to block
the emission of the clicked() signal had this unwanted side effect.
Instead, use an explicit boolean to store that the next release event
will be the result of a double click, so that the clicked() signal is not
emitted again (preventing the double-emission was the purpose of change
d6551fe125).
Task-number: QTBUG-77771
Fixes: QTBUG-94087
Pick-to: 6.1 5.15
Change-Id: I082c5169d89eb980dcd7985ef3d302b6ff060fb9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Olivier BARTHELEMY <perso.olivier.barthelemy@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Test would previously have leaked on failure.
While checking for other uses of delete-after-checks, simplify one
place that tested deleting a calendar widget lead to recreation.
Pick-to: 5.15 6.1
Change-Id: I9524902a02dd42793bcf71113c6799dc925ac4a0
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Calling create_mapping in setSourceModel as introduced by 8455bfee76
can lead to an early call to filterAcceptsRow, and some existing applications may crash.
It is also an incomplete solution since it was only done for the
toplevel index but not for child indexes.
Instead, go back to creating mappings on demand.
This means coming up with a different fix for QTBUG-87781 (dataChanged
not emitted for indexes that haven't been mapped yet, i.e. not queried
or shown anywhere).
When this happens, we can't know if the index was previously filtered
out or not (for lack of a dataAboutToBeChanged signal...). Creating
the mapping with the new data only gives us the new state of affairs,
there's no reference state to compare to. Therefore, when the mapping
is missing (during dataChanged handling), create it, but skip all the
logic about row insertion/removal, just forward the dataChanged signal
if the row isn't filtered out.
Creating the mapping might require creating first mappings for parents,
recursively, which wasn't done anywhere in QSFPM yet, hence the new
create_mapping_recursive() method.
In addition to all this, the handling of removed items was incorrect,
remove_source_items did nothing if the parent was gone, and then
source_items_removed was trying to adjust indexes in an incorrect list.
If the parent is gone, clear the proxy_to_source list, so there's
nothing to adjust afterwards. This bug actually doesn't happen anymore
in this version of the patch, but the change still seems right and might
prevent repeating a long debugging session in the future.
Thanks to ChunLin Wang for the unittest in this commit.
Done-with: ChunLin Wang
Pick-to: 6.1 6.0 5.15
Change-Id: Id543d0cc98f1a03b5852bda01d2f49b980e06be7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Handy when one has the data buffer to be read in a QBAV.
This also fixes an issue and compiler warning about passing a
qsizetype data length value as an int, and makes it possible to pass
a qsizetype-size length without going through QByteArray.
Makes the QByteArray overload redundant.
Change-Id: Iba8825cf0fd8003fb2eac5b1d30a61ec91b85ceb
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Both functions now return a result object. Eliminates the need
to pass the errorMessage out-parameter. Adapt auto-tests.
Change-Id: I110b68fedc67b01f76796c44fa55383b2cc03460
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Needed for QML compiler to know property index of C++ type at
compile time without going through QMetaObject::indexOfProperty
Change-Id: I404e71d6071d36812661df17d12b879a8dcbd146
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test connects finished to the groups clear method, which in turn
deletes the animation instance. Thus, no member must be accessed after
calling stop, unless we use a (costly) QPointer to guard against
deletion.
Notify earlier that totalCurrentTime changed to avoid the issue.
As a drive-by, modernize the connect in the test.
Fixes: QTBUG-94143
Change-Id: I923101107b7f79115be69a58c8e8d5177a98d48f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The JNI interface expects a const JNINativeMethod[] and our wrapper
takes a non-const. Also, this was causing refactoring of exisisting code
with a const JNINativeMethod[] to fail because the call expects a
non-const.
Change-Id: If790c401650cb33fe31f93bafe41aab7714488e9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QPropertyChangeHandler is a templated class and it's argument is
a functor. That makes it inherently cumbersome to use the class
in any context where the change handler needs to be stored.
Introduce a QPropertyNotifier class that stores the functor
in a std::function<void()>, and add a QProperty::addNotifier()
method that can be used instead of onValueChanged().
Also make QPropertyNotifier default constructible.
This significantly simplifies the code that needs to be written
and makes it possible to store notifications as class members
without major hassle.
Fixes: QTBUG-92980
Change-Id: Id5b7baec093b9ac0467946cded943d92ad21030b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use class WriteIncludesBase and store classes encountered in a
per-module hash (Qt/custom widgets). Write out only the required
classes.
Add --star-import as a fallback should the change cause issues.
Task-number: PYSIDE-1404
Change-Id: Ic50e26758ddd0f2f8aebbce470d32a36fb09a2c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
When rotating M_PI_2 based on x-axis, quaternion to euler conversion
makes NaN for the x-rotation value. This patch fixes this corner case.
Fixes: QTBUG-93600
Pick-to: 6.1 6.0 5.15
Change-Id: Ice321a80ad90dba9cf3ee3a14ec7d3d047c21bd3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This patch adds the API, with no supporting backends
Task-number: QTBUG-93848
Change-Id: I50454717f928819e1b990df91872675e842f9987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Supported on OpenGL (and ES) 3.0+ and everywhere else.
Can also be a render target, targeting a single slice at a time.
Can be mipmapped, cannot be multisample.
Reading back a given slice from a 3D texture is left as a future
exercise, for now it is documented to be not supported.
Upload is going to be limited to one slice in one upload entry,
just like we specify one face or one miplevel for cubemap and
mipmapped textures.
This also involves some welcome hardening of how texture subresources
are described internally: as we no longer can count on a layer index
between 0..5 (as is the case with cubemaps), simply arrays with
MAX_LAYER==6 are no longer sufficient. Switch to sufficiently dynamic
data structures where applicable.
On Vulkan rendering to a slice needs Vulkan 1.1 (and 1.1 enabled on the
VkInstance).
Task-number: QTBUG-89703
Change-Id: Ide6c20124ec9201d94ffc339dd479cd1ece777b0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It's pointless in a fuzzer and slows down execution.
Change-Id: I0d36ed8814cf8fb332c196ea7e24eae8ee4d3c6e
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
It's pointless in a fuzzer and slows down execution.
Change-Id: I160d7fd761118f9eba9b98fc024aef293e021845
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When the PageDown is pressed, the current's rect cannot be
used to match the item, because we don't know the size of
the rect. Move the rect by the height of the viewport, and
then move the rect upwards until it matches the
button <= viewport's bottom of the item
Fixes: QTBUG-92583
Pick-to: 6.1
Change-Id: I210edc0e8b942984f3fc20e7752c6e1315152ea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When changing the style of the combobox, the change will not propagate
to the internal container widget, so the changeEvent handler won't be
called. This is correct (as per QWidget::setStyle documentation).
QComboBoxPrivateContainer asks the combobox style for relevant settings,
such as the frame style, which is then used for sizing and positioning.
If the combobox's and container's settings become inconsistent, then the
combobox popup will not get the correct size and/or position.
Move some of the style-dependent changes into a separate function and
call it when the QComboBox::changeEvent handles the style change so that
both widgets have a consistent set of settings.
Add a test case that verifies that the style is asked for the relevant
setting when the style changes.
Note: QComboBox does a lot of style-dependent setup work in different
places, which is quite messy and complex. Trying to consolidate that
further breaks tests though, so this change is doing the minimum
necessary to fix the reported issue.
Pick-to: 6.1 5.15
Fixes: QTBUG-92488
Change-Id: Ia957d504b2d800add26fc0565be727b5c08a5358
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This proposal collects all the resource objects to the qt-specific
property of the static libraries. This is done to avoid littering
of other static libraries and put resource object files to the
source part of the linker line when linking the end-point
executable.
The way we link object resource libraries is changed back to the
target_link_libraries approach as we may omit using finalizers
with linkers other than ld. Users may enforce finalizers by calling
the qt6_enable_resource_objects_finalizer_mode function if need.
Refactor tests related to the static resources.
Amends ddaa7150d8
Task-number: QTBUG-93002
Change-Id: I74135e291cd82fb54d1b284b4b4a1e002b1fef98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only use plugin finalizer mode if qt_finalize_target is called at the
end of the user project (which we can't really check, the user has to
ensure that) or when qt_finalize_target is automatically defer-called
by CMake 3.19+ (which is done by qt_add_executable).
This removes the previous behavior of using the finalizer mode if
qt_import_plugins is called. Instead the old regular mode is used
if the above preconditions are not met.
The removed behavior had ordering issues if qt_import_plugins was called
before target_link_libraries. The dependency walking would be done
before Qt dependencies were added and thus no plugins would be
linked.
Amends 6fcc272ac9
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Task-number: QTBUG-94030
Change-Id: I78702b653a35596f5581c2f4282b2336f0124e60
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This replaces QtAndroidPrivate::runOnAndroidThread{Sync} calls.
This also now allows passing std::function<> that can return values,
and not only an std::function<void()>.
This adds some tests for this calls as well.
Fixes: QTBUG-90501
Change-Id: I138d2aae64be17347f7ff712d8a86edb49ea8350
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add NEON for RGB32 and RGBA64 writeback, and SSE2 for
RGBA64 writeback.
Change-Id: Id9ee803267a78f5bdff5beaa719e7a59c1dbb9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When adding an offset from UTC, arithmetic may overflow. Likewise
when combining a date and time (that have been offset for UTC). Also
check the return from epochMSecsToLocalTime(), as it can fail; and pay
attention to the status stored by setDateTime(), to notice when it
hits an overflow. Fixed some tests that only passed because we
neglected these checks. Extended a test to check we detect overflow in
a couple of cases close to the extremes.
Change-Id: I127a670302f94a07bb9b087b1b9c608b7c08785c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime has long followed a convention of ignoring what it knows
about time-zone transitions before the epoch. This produces unhelpful
artefacts (such as an ahistorical spring-forward skipping the first
hour of 1970 in Europe/London, which was in permanent DST at the time)
and complicates the code. It documented that DST transitions were
ignored, but in fact ignored all transitions prior to 1970 and simply
assumed that the current time-zone properties (half a century later)
applied to all times before 1970.
This appears to be based on the fact that the MS APIs using time_t all
limit their range to after 1970. Given that we have to resort to
"other means" to deal with times after the end of time_t, when it's
only 32-bit (and after year 3000, on MS systems), we have the means in
place to handle times outside the range supported by the system APIs,
so have no need to mimic this restriction. (Those means are not as
robust as we might want, but they are less bad than assuming that the
present zone properites were always in effect prior to 1970.) On
macOS, the time_t functions only reach back to the start of 1900; it
reaches to the end of its time_t range and Linux covers the whole
range. Given this variety, the range is now auto-detected the first
time it is needed (based on some quick and dirty heuristics).
Various CET-specific tests now need adjustments in tests of times
before the introduction of time-zones (when they are in fact on LMT,
not CET). The systemZone() test of QTimeZone can now restore its
pre-zone test cases. Various comments on tests needed updates.
[ChangeLog][QtCore][QDateTime] Available time-zone information is now
used to its full extent, where previously QDateTime used LocalTime's
current standard time for all dates before 1970. Where we have
time-zone information, it is considered reliable, so we use it. This
changes the "best efforts" used for times outside the range supported
by the system APIs, in most cases giving less misleading results.
Fixes: QTBUG-80421
Change-Id: I7b1df7622dd9be244b0238ed9c08845fb5b32215
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QNetworkInterface reports as up and running an interface,
seemingly having a valid IP address which actually has
not IPv4/IPv6 configured at all (this is what getifaddrs
gives us).
Change-Id: I5808d5dfdbc54004a1e02b791917e9b2ba62905f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There were two problems here: first, qHash(std::pair) must be declared
before qHashMulti that might call back to qHash(std::pair) (i.e., a pair
with one element that is also a pair). But moving the declaration above
causes the second problem: the noexcept expression can't refer to qHash
functions that aren't declared yet. So we forward-declare a constexpr
function for that result, but implement it far below.
Fixes: QTBUG-92910
Change-Id: Ia8e48103a54446509e3bfffd16767ed2e29b026c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 37e0953613 added a to-do, but we
can actually change the type, since we've documented since Qt 5.10 that
setting a non-zero value (aside from -1) with qSetGlobalQHashSeed was
not allowed. Storing a value to be reset later is simply not supported.
Change-Id: Id2983978ad544ff79911fffd1671f7b5de284bab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It is now possible to call qt_add_big_resources with multiple .qrc files
that are in different directories but have the same file name.
Before, this resulted in target name conflict errors.
Pick-to: 6.1
Fixes: QTBUG-93230
Change-Id: Ic3d9d6974a107163aeb7ada0b6f1fa113fb18de0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For some reason the test case was (no longer?) detected by moc
Change-Id: I20f20de76479f7d9db43fae985cefe0869a7e203
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing conversions weren't handling gamma correctly and used
an ad-hoc definition of gray instead of based on true luminance.
[ChangeLog][QtGui] RGB conversions to grayscale formats are now
gamma-corrected and produce color-space luminance values
Change-Id: I88ab870c8f5e502ddb053e6a14a75102239a26f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The check is over-arching. is_move_constructible is sufficient;
we don't have to support "ridiculous" types that are copiable but
have deleted move operations (such types are fundamentally broken).
This is in line with the Move* (legacy) named requirements.
Change-Id: Idc7116b39013501b9be39628a4e7afd35fe15530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
To see if a certain method is supported. To be used in an upcoming patch.
Change-Id: I1a5c2f655585331820701bb54f6991b4aba38273
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qt6_add_big_resources command was dysfunctional whenever AUTOMOC was
enabled for a target.
We passed multiple object files with the --temp argument of the second
pass of rcc. We must pass exactly one. The spurious object file was the
one that's created by AUTOMOC. Turn off all of AUTOGEN for the C++
source file that's generated in the first pass of rcc.
Enable AUTOMOC for tests/auto/cmake/test_add_big_resource to cover this
situation.
Pick-to: 6.1
Fixes: QTBUG-85051
Change-Id: I6d2ce4953297db0751913456db0a4a126fe33f14
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's very likely that we'll have to run certain finalizer code for
targets other than executables.
Rename qt_finalize_executable to _qt_internal_finalize_executable so
it's internal.
Introduce a new function qt_finalize_target which will call the above
internal one when the target is an executable.
This should future proof the API so we have a hook to call code for
any user CMake project that intends to use Qt CMake API.
Change-Id: I03f6f4dcba22461351c247a20241ca7de1a59c1d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In QFileSystemModel, in some cases the hostname in a UNC path is
converted to lower case and stored in the root node's visibleChildren.
When QFileSystemModel sets the UNC path as the root path, it tries to
get the row number for the host, but it didn't convert the hostname to
lower case before getting the row number, which resulted in the host
not found in the root node's visible children. As a result, it returns
-1, an invalid row number. Change the behavior to find the node for the
host using the host name case-insensitive and then get the row number.
Fixes: QTBUG-71701
Pick-to: 5.15 6.0 6.1
Change-Id: Ib95c7b6d2bc22fd82f2789b7004b6fc82dfcb13b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
There was previously no way to compare QByteArrayView to with another
QByteArrayView case-insensitively without allocating memory.
[ChangeLog][QtCore][QByteArrayView] Added compare(), enabling case
sensitive and insensitive comparison with other QByteArrayViews.
Change-Id: I7582cc414563ddbde26da35a568421edcc649f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow linking all plugin initializer object libraries directly
into the final target (executable or shared library).
The finalizer mode is triggered when the project adds a call
to qt_import_plugins, as well when the project has an explicit
call to qt_finalize_executable or when it is defer called by
CMake 3.19+.
Otherwise the old non-finalizer mode is used, where each plugin
initializer object library is propagated via the usage
requirements of its associated module.
A user can explicitly opt in or out of the new mode by calling
qt_enable_import_plugins_finalizer_mode(target TRUE/FALSE)
The implementation, at configure time, recursively collects all
dependencies of the target to extract a list of used Qt modules.
From each module we extract its list of associated plugins and
their genex conditions. These genexes are used to conditionally
link the plugins and the initializers.
Renamed QT_PLUGINS property to _qt_plugins, so we can safely query the
property even on INTERFACE libraries with lower CMake versions.
QT_PLUGINS is kept for backwards compatibility with projects already
using it, but should be removed in Qt 7.
The upside of the finalizer mode is that it avoids creating link
cycles (e.g. Gui -> SvgPlugin -> Gui case) which causes CMake to
duplicate the library on the link line, slowing down link time as well
as possibly breaking link order dependencies.
The downside is that finalizer mode can't cope with generator
expressions at the moment. So if a Qt module target is wrapped in a
generator expression, it's plugins will not be detected and thus
linked.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ic40c8ae5807a154ed18fcac18b25f00864c8f143
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
After commit 3966b571 the function was kinda broken already, though
this got unnoticed since it was not covered by an the auto-test.
This commit adds another test case with Windows native separators
and removes the use of QDir::fromNativeSeparators. Instead use the
original code from QDir::fromNativeSeparators to replace the backslashes.
Pick-to: 5.15 6.0 6.1
Change-Id: I190560d0e75cb8c177d63b142aa4be5b01498da2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Normally we only allow creating wrappers for texture objects. These
can then be used with a QRhiTextureRenderTarget to allow rendering into
an externally created texture.
With OpenGL (ES), there are additional, special cases, especially on
embedded. Consider EGLImages for example. An EGLImageKHR can be bound to
a renderbuffer object (glEGLImageTargetRenderbufferStorageOES), which
can then be associated with a framebuffer object to allow rendering into
the external buffer represented by the EGLImage. To implement the same
via QRhi one needs a way to create a wrapping QRhiRenderBuffer for the
native OpenGL renderbuffer object.
Here we add a createFrom() to QRhiRenderBuffer, while providing a dummy,
default implementation. The only real implementation is in the OpenGL
backend, which simply takes a renderbuffer id, without taking ownership.
Task-number: QTBUG-92116
Change-Id: I4e68e665fb35a7d7803b7780db901c8bed5740e2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Mostly for testing QLatin1String::indexOf optimizations in the next
patch but useful in general
Change-Id: I85bf76f3e1d5abb994fd12907db2f2a723a8d330
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QItemSelectionModel has the property selectedIndexes with
the notification signal selectionChanged. When a row is deleted
or inserted above the current selection, the row number of the
current selection changes and thus the return value of
selectedIndexes changes. This should trigger its notification
signal.
This signal was not emitted. This patch fixes this and
adds a unit test to verify this.
[ChangeLog][Important Behavior Changes][QtCore]
QItemSelectionModel now emits the selectionChanged signal
if only the indexes of the selected items change.
Fixes: QTBUG-93305
Change-Id: Ia5fb5ca32d658c9c0e1d7093c57cc08a966b9402
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
"Cherry-pick" of C++2b's std::to_underlying.
[ChangeLog][QtCore][QtGlobal] The qToUnderlying function has been
added, to convert an value of enumeration type to its underlying
value.
Change-Id: Ia46bd8e4496e55174171ac2f0799eacbcca02cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just a compile-time one (that the macros compile and don't
raise warnings).
Change-Id: I5642bf242a6c26a33730708f3c1710237fc107a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no reason to be storing `int` in the array data header and
then using it as a QFlags. Just store the QFlags.
Change-Id: I78f489550d74d15a560dacf338110d80a7ddfdd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFlags was lacking a named function for testing whether a QFlags object
contains _any_ of the bits set by a given enumerator/other QFlags.
Drive-by, add testFlags taking a QFlags, not just an object of the
enumeration; and simplify the implementation of testFlags to more
closely follow what its documentation says it does.
[ChangeLog][QtCore][QFlags] The testFlags, testAnyFlag and
testAnyFlags functions have been added.
Change-Id: Ie8688c8b0dd393d34d32bc7786cdcee3eba24d1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While at it, move tst_android under corelib/platform/android.
Change-Id: Icf91cd75cb5e04d03fe6a81d52fba52a485ca41f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The initial approach for providing public access to native
interfaces via T::nativeInteface<I>() was based on the template
not being defined, and then having explicit instantiations of
the supported types in a source file, so that the accessors
were exported and available to the user.
This worked fine for "simple" types such as QOpenGLContext
and QOffscreenSurface, but presented a problem in the context
of classes with subclasses, such as Q{Core,Gui}Application.
To ensure that a native interface for QCoreApplication was
accessible both from QCoreApplication and its subclasses,
while at the same time preventing a native interface for
QGuiApplication to be accessible for QCoreApplication, the
nativeInterface() template function had to be declared in
each subclass. Which in turn meant specializing each native
interface once for each subclass it was available in.
This quickly became tedious to manage, and the requirements
for exposing a new native interface wasn't very clear with
all these template specializations and explicit instantiations
spread around.
To improve on this situation, while also squashing a few
other birds at the same time, we change the approach to
use type erasure. The definition of T::nativeInteface<I>()
is now inline, passing on the requested interface to a per
type (T, not I) helper function, with the interface type
flattened to a std::type_info.
The type_info requested by the user is then compared to the
available types in a single per-type (T) "switch statement",
which is a lot easier to follow for someone trying to trace
the logic of how a native interface is resolved.
We can safely rely on type_info being stable between the user
application and the Qt library as a result of exporting the
type info for each native interface, by explicitly ensuring
they have a key function. This is the same mechanism that
ensures we can safely dynamic_cast these interfaces, even
across library boundaries.
The use of a free standing templated helper function instead
of a member function in the type T, is to avoid shadowing issues,
and to not pollute the class namespace of T with the helper
function.
Since we are already changing the plumbing for how a user
resolves a native interface for a type T, we take the opportunity
to add a few extra safeguards to the machinery.
First, we add a static assert in the T::nativeInteface<I>()
definition, that ensures that only compatible interfaces,
as declared by the interface themselves, are allowed.
This ensures a compile time error when an incompatible
interface is requested, which improves on the link time
errors we had prior to this patch, and also offsets the
one downside of type erasure, namely that errors are only
caught at runtime.
Secondly, each interface meant for public consumption through
T::nativeInteface<I>() is declared with a revision, which
is checked when requesting the interface. This allows us
to bump the revision when we make breaking changes to the
interface that would have otherwise been binary incompatible.
Since the user will never see this interface due to the
revision check, they will not end up calling methods that
have been removed or renamed.
One advantage of moving to a type-erased approach for the
plumbing is that we're not longer exposing the native
interface types as part of the T::nativeInteface symbols.
This means that if we ever want to rename a native interface,
the only exported symbol that the user code relies on is
the type info. Renaming is then possible by just exporting
the type info for the old interface, but leaving it empty.
Since no class in Qt implements the old native interface,
the user will just get a nullptr back, similarly to bumping
the revision of an interface.
Change-Id: Ie50d8fb536aafe2836370caacb22afbcfaf1712a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since we changed binding evaluation to be always eager, we notify and
evaluate all bindings as soon as any dependency changes. This includes
bindings which have been initially installed on a property, but which
were later removed.
With lazy evaluation, we would only notify those bindings and mark them
as dirty, which is unproblematic. With eager evalution, we attempt to
evaluate the binding, though. While that part is still fine, afterwards
we would attempt to write the new value into the property. However,
there is no property at that point, as the binding is not installed.
Instead of adding a check whether the propertydataptr is null, we skip
the reevaluation completely by removing the bindings observers - and
thus the cause for the binding function's reevaluation. As soon as the
binding is set, we reevaluate the function anyway, at which point we
also capture the observers again.
Task-number: QTBUG-89505
Change-Id: Ie1885ccd8be519fb96f6fde658275810b54f445a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Already blacklisted on the other linux versions, but is failing on
SLES now in 5.15
Pick-to: 6.1 5.15
Change-Id: I267908adf94ede51e5520aa2cb806b394fb0438e
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This removes traces of QPropertyAlias which is internal API which is
a) not really working even before this change (no compatibility with
QBindableInterface due to QPropertyAlias not being derived from
QUntypedPropertyData)
b) not used anywhere
For BIC reasons, we need to keep some methods still around until Qt 7,
though.
Change-Id: I5bb4735a4c88cba275dc2cc6e29a46ca09622059
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This takes care of the last two QSFPM properties. They were postponed
because of the tricky relation between them and some bugs in handling
the changes.
The bug was fixed in bcbbbdb2d6 and
now the behavior is well-determined: updating filter regexp does
trigger case sensitivity change and vice versa. However updating
only regexp pattern (via QString overload or setFilterFixedString
or setFilterWildcard) does not change case sensitivity.
Task-number: QTBUG-85520
Change-Id: Idc41cf817de9e6263ed65a80fa40fc8415c8c856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
filterRegularExpression and filterCaseSensitivity
will be handled in a separate commit
Task-number: QTBUG-85520
Change-Id: I848c5c6cbe8642efa156f4f5d33467976bbf0351
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
takeItem and takeChild do not signal the change correctly to the
external world, this change fixes the problem
Fixes: QTBUG-89145
Pick-to: 6.1 5.15
Change-Id: Ib4844ace53007068a2cd62eba64df99e6e45fdc0
Reviewed-by: David Faure <david.faure@kdab.com>
child->widget() returns null if the layout item is not a widget.
Thus, calling removeWidget(nullptr) will remove all non-widget items
such as layouts or strechers.
Change-Id: I772c1158d0f7e8e2850b6e571b0405a2896f09b8
Pick-to: 6.0 6.1 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Now that we run tests for static Qt builds in the CI, it makes sense
to restore the CMake build tests that check that static plugin
importing works correctly.
Resurrect the previously commented out test_import_plugins project and
port the mockplugins qmake projects to CMake.
mockplugins is a CMake project that uses the internal Qt CMake API to
build and install some Qt modules and plugins.
test_import_plugins depends on that test (via a CMake fixture) to
build public projects that use those plugins.
The installation of the mockplugins modules pollutes the Qt install
prefix, but in the CI that only happens on the test VM, which means
the release packages are not affected.
Locally on a developer machine the Qt install path will be polluted,
but it's not that much of a big deal. We could try and address that in
a future change by using the QT_ADDITIONAL_PACKAGES_PREFIX_PATH
functionality added for Conan to allow the installation of Qt packages
into a non-standard prefix.
Task-number: QTBUG-87580
Task-number: QTBUG-92933
Change-Id: I0841064a60a5ffba5118640d3197527a38ba6c30
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The Qt CMake packages are not installed yet, so the CMake build
projects can't find Qt and fail to configure.
Skip the CMake build tests in a prefix in-tree configuration and issue
a warning for informational purposes.
Change-Id: Ie5cb5b9f6f1d8ec258b70528680e31c711c20f85
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When the listview setWordWrap is true and ScrollBarPolicy is
ScrollBarAsNeeded, if the text needs a newline display and the
vbar is not shown, the width of the item was subtracted from
the width of the scrollbar.
In most cases, the listview needs to reserve the size of the scrollbar.
But if the flow is TopToBottom and the vertical scrollbar is not
visible, the width of the vertical scrollbar cannot be reserved.
Fixes: QTBUG-92366
Pick-to: 5.15 6.0 6.1
Change-Id: I73cce691099a253d409019dbb3fe9a16e1830bb1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The commit amends commit 3966b571 to take UNC prefix into account as
well. Fixes the weird file name output as reported in QTBUG-74291 and
QTBUG-83365. Replace manual separator normalizing in qt_cleanPath(),
this is another spot where UNC prefix handling needs to be applied.
Also make QTemporaryFile operate on '/' as file separators to fix
creating both file types with native path separators on network shares.
Fixes: QTBUG-74291
Fixes: QTBUG-76228
Fixes: QTBUG-83365
Pick-to: 5.15 6.0 6.1
Change-Id: Iff8d26b994bf4194c074cd5c996cda3934297fa5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
from qt/qtx11extras 0e67fb41cfc4b4bfbaa7dc75f8ddebdf5a08e836.
The plan is to expose these as native interfaces, so this is a first
step.
Task-number: QTBUG-83251
Change-Id: Iecba8db9a4f616a08a3750ddaae08cc30ec66f89
Reviewed-by: Liang Qi <liang.qi@qt.io>
Most nested block elements are merged together, so while we shouldn't
do real inheritance we need to do it when block elements are combined.
Pick-to: 6.1
Fixes: QTBUG-91236
Change-Id: I9e37b15f705db92c79a620d0d772f25d0ee72b8d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][QtCore][QMetaMethod] It is now possible to query the
constness of a method with QMetaMethod::isConst.
Change-Id: I8a94480b8074ef5b30555aeccd64937c4c6d97d4
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The libs and symlinks are in the same directory, no need
to have absolute paths.
Change-Id: I22dab933b1f3bdf244b0953c6bb7caaeedef5697
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a tab has a font assigned to it through a style sheet, then take the
font size into account when calculating the contents rectangle.
Add a test, which hardcodes the windows style to avoid flaky behavior
when e.g. macOS lays tabs out in the center.
Fixes: QTBUG-92988
Pick-to: 6.1
Change-Id: Ifb0ac97db7647cc25367972737be8878e50f6040
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When trying to find the original window title, check for another
maximized sub window and use its title. Protect the calls to
setWindowTitle to prevent the original title from being cleared.
Pick-to: 6.1 5.15
Fixes: QTBUG-92240
Change-Id: I55175382ab261b4cf8b5528304adaaec4fbe2c31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We only need to the location of certain paths for the test. For that,
qtpaths is sufficient.
Change-Id: I5af0d56b548629edc48949150ed8fbd408b617a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we are having nested lists then we need to ensure that the HTML is
outputted correctly so that the closing list and item tags are placed
in the right order.
[ChangeLog][QtGui][QTextDocument] The output of toHtml() now handles
nested lists correctly.
Fixes: QTBUG-88374
Pick-to: 6.1 5.15
Change-Id: I88afba0f897aeef78d4835a3124097fe6fd4d55e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This unit test is related to the parent commit.
Html export used to omit the text-decoration for the default font,
this unit test ensures that this property is added to the exported
html.
Fixes: QTBUG-91171
Change-Id: Ib68bec27f9963cdcac5c553b2c07557717b1c22e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It used to be ignored because we couldn't disable it, but that works
fine now. So re-enable it.
Fixes: QTBUG-91171
Change-Id: I4cf966211bb200b73326e90fc7e4c4d3d4090511
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
CLDR v39 has no locales for Abkhazian, so the locale_index[] entry for
it actually indexes the last entry before the next language up the
enum. This has m_language_id less than Abkhazian.
Change-Id: If8b88f30476a981b3ee00ff8760a46ede0b7aab7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
