The assertion is triggered when a timer cannot be started. This
is normal occurrence when an application exits before all pending
D-Bus calls are processed. And there is a code handling such failure
in the same function. Qt also prints a warning message in this
case:
QEventDispatcherGlib::registerTimer: invalid arguments
Task-number: QTBUG-58732
Pick-to: 6.6
Change-Id: I37859443fa90ae1bf7da1572ac9b02a54c8e1b99
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSqlDatabase uses a Q_APPLICATION_GLOBAL and so should not be used
without QCoreApplication instance. The test crashes if the existence
of an application instance is asserted in Q_APPLICATION_GLOBAL
code.
Pick-to: 6.6
Change-Id: Iaa3f4dff7b2722257735680dd3885aeed0ac810b
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Add asserting verifying that a QCoreApplication exists when
the application static variable is dereferenced. This is a
requirement described in the documentation. Added assertion
makes invalid use much more visible. Without the assertion
only a message about invalid nullptr used with QObject::connect()
is emitted. This message is much less informative and does
not cause tests to fail.
Pick-to: 6.6
Change-Id: Id9d4a34679ca5aca93ee45ca2318d4ccf849887b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QEventDispatcherGlib: it used the out-parameter timespec to set a
timeout in milliseconds, making timerWait() return milliseconds is more
straightforward. Also timerWait() returns the time rounded to
milliseconds, so the code in QEventDispatcherGlib that rounded up the
timespec::tv_nsec part was no-op, tv_nsec was always 0 IIUC.
In QEventDispatcherGlib, guard against overflow with qt_saturate.
Change-Id: Ie6f78374d00cbe8a6adf7b50ed67c8c86ab4d29d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
First lookup with value(key), second lookup with remove(key). Use
constFind() to get an iterator and use that instead.
Pick-to: 6.6 6.5
Change-Id: Idce585ad2269be91eda0381aeb2f2d164033f71f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the rest of the code slightly cleaner.
Change-Id: I67606b369f00d54fc24f7d6f41c004a728d37b5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce a mutex that protects access to the spy hooks list.
Also don't pass around raw pointers to the spy hook list,
those can change when new hooks are added and storage is
reallocated. Change the type of the hooks list to QList
to take advantage of copy-on-write in common case.
Check whether the global static is destroyed in qDBusAddSpyHook().
Change-Id: I440a88ce088d6fb5817660c8e1e02901281b842f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
operator=(~) and assign(~) share similar names but, until now, have not
shared the same functionality. This patch introduces the usage of
QByteArray::assign() within the non-sharing assignment operator to
effectively boost efficiency by reusing the available capacity.
Since these assignment operators are frequently used in many places,
both within Qt and non-Qt code, this patch comes with benchmarks.
The preview of the benchmark results are compared with this patch and
before this patch. The findings indicate a slight enhancement in
performance associated with the assignment operator. Despite the results
displaying only a minor improvement, progress has been made. Therefore
use assign(QByteArrayView) as replacement.
(x86_64-little_endian-lp64 shared (dynamic) release build (O3); by
gcc 13.2.1, endeavouros ; 13th Gen Intel(R) Core(TM) i9-13900K
benchmarks executed with -perf -iterations 1000000
* The last value at the EOL represent the string size.
QByteArray &operator=(const char *ch) (current)
65 cycles/iter; 317 instructions/iter; 16.0 nsec/iter (5)
71.7 cycles/iter; 383 instructions/iter; 13.0 nsec/iter (10)
59.8 cycles/iter; 318 instructions/iter; 10.9 nsec/iter (20)
70.8 cycles/iter; 340 instructions/iter; 12.9 nsec/iter (50)
80.2 cycles/iter; 419 instructions/iter; 14.6 nsec/iter (100)
164.2 cycles/iter; 899 instructions/iter; 29.9 nsec/iter (500)
260.5 cycles/iter; 1522 instructions/iter; 45.6 nsec/iter (1'000)
QByteArray &operator=(const char *ch) (before)
66.8 cycles/iter; 317 instructions/iter; 16.9 nsec/iter (5)
76.5 cycles/iter; 383 instructions/iter; 13.9 nsec/iter (10)
63.7 cycles/iter; 318 instructions/iter; 11.6 nsec/iter (20)
71.6 cycles/iter; 344 instructions/iter; 13.0 nsec/iter (50)
77.5 cycles/iter; 419 instructions/iter; 14.1 nsec/iter (100)
143.4 cycles/iter; 893 instructions/iter; 26.1 nsec/iter (500)
270.8 cycles/iter; 1516 instructions/iter; 48.2 nsec/iter (1'000)
Task-number: QTBUG-106201
Change-Id: I0745c33f0f61f1d844a60960cc55f565320d5945
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the API symmetric again (fromBytes()/toBytes(),
fromString()/toString(), fromUInt128()/toUInt128()), but also gives us
the option to remove the QUuid(quint128), should we so choose, because
of its overly-broad argument matching range.
Found in API review.
Pick-to: 6.6
Change-Id: I91bd2450d62ed565ec3b8e46c875f4983bd9dc73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It matches any integral type, any unscoped enum and any FP type, so we
can't allow it to be implicit. In fact, it's probably better to only
have a named contructor, fromUint128().
Found in API review.
Pick-to: 6.6
Change-Id: I9b250e0b5e74a449b6df4efe3ea38b750c9744ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC seems to emit warnings failing the build in some situations where a
return statement comes after a Q_UNREACHABLE. This does not seem to
happen on other compilers. The Q_UNREACHABLE_RETURN macro already exists to deal with this situation. Define it for MSVC.
Change-Id: Iad06f4048e2829b1eac4f78a1053041ef72c21e7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If user attempt to build Qt using multi-config generator set Release
and Debug configurations by default if they are not set, instead of
relying on what CMake suggests as default value for a platform.
Pick-to: 6.6
Change-Id: I4bdb33e56818984c189b737acccc9ac50659db96
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Description added to the html tags for accessibility in wasm through the
aria-description property
Change-Id: Ic1976d5c4c64ea45298f24b660807adeda6fdb64
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Move the SlotObjUniquePtr directly into the QMetaCallEvent, without
having to up and down the ref-count.
Pick-to: 6.6 6.5
Change-Id: I029f71c60defce71ac8778547efe999ce0cf7b4b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Only const members of the object are used inside the function body.
This addresses a review comment for 0f37c47713
Change-Id: I873d87104eb2483c4388929487d750d4a7d44bf3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using Q_FUNC_INFO has an advantage that at least GCC includes
the variable type and name into the string. This makes it much
easier to understand access to which global static is causing
an assertion.
Pick-to: 6.6
Change-Id: Ie6ce992921c0969df262fed22024a22650783f93
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Test sendEventsOnProcessEvents has been noticed to fail when
qgtk3 (Glib) is loaded - Should be fixed in QTBUG-87137
Moving test from blacklist to use QEXPECT_FAIL as it's more
recommended until test is fixed in the relevant configurations.
QEXPECT_FAIL is selected to use as original investigator
reported also some cases when glib is working. Therefore
this approach is giving us more insight for further
investigation is it always failing with glib or not.
It was also reported linkage to zeroTimer test QTBUG-84291,
but not sure why removing that has affected to this one.
Update to QEXPECT_FAIL documentation to tell in first place
that XPASS is not only marking it as XPASS but also failing
the test. Same is mentioned in different location but it
needs more searching or testing how it works in real test.
Task-number: QTBUG-115155
Change-Id: I7fb4ef28dba8adb7009be528f88fc758a12e9006
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Defining USE_LEXEM_STORE breaks compilation, and the commit that
introduce it (in the pre-public history) does not shed any light on its
usage.
Change-Id: Ic616bf9f2584151dab3f654d64025fcdc0ade25c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Instead of copying a list, sorting it just to check it's sorted, and
making a QSet out of it just to check the size is the same as that of
the list (thereby checking there were no duplicates), simply apply
adjacent_find with greater_equal. If none of the elements is ≥ their
successor, that means all elements are < their successor, and _that_
means the range is sorted and has no duplicates. q.e.d.
Pick-to: 6.6 6.5
Change-Id: Id73c674ad4e29117370e8fc6af9fdfc690a3fba9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The density of Q_FOREACH uses isn't very high here, but at this time,
this author just goes through the code-base and white-lists TUs that
still use Q_FOREACH in order to globally enable QT_NO_FOREACH.
Mark the whole plugin with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TU by #undef'ing QT_NO_FOREACH
locally, at the top of each file. Since the TU is part of a larger
executable, this requires the file to be compiled separately, so add
it to NO_PCH_SOURCES (which implies NO_UNITY_BUILD_SOURCES, too).
Task-number: QTBUG-115839
Change-Id: If731d02f65131c94afa8beb51679ed2ff7d2cdaa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
As a header, it would otherwise make all TUs that include it (with
PCH: all) incompatible with QT_NO_FOREACH.
Without deeper analysis (which economy of time forbids in this case,
given this is just a manual test that's probably run 10 times per
year), and seeing as this is in an event handler, I opted to play it
safe and iterate over a copy (which is exactly what Q_FOREACH
does). Added a comment to indicate it may not be needed.
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: I7db75321dd34888f6dd7a64cccb7462ff35935fa
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
First include the common tst_qmimedatabase.cpp (and nothing else),
then implement the differing
tst_QMimeDatabase::initTestCaseInternal().
This will allow adding #undef QT_NO_FOREACH to tst_qmimedatabase.cpp
in the next step.
Pick-to: 6.6 6.5
Change-Id: Icc1890229e9443bd35c81d4f0440ba7df5da906c
Reviewed-by: David Faure <david.faure@kdab.com>
The single Q_FOREACH use here is simple, as it's over a local variable
that just isn't marked as const due to the way it's constructed, and
the loop body clearly doesn't modify the container, so the protective
copy that Q_FOREACH performs is not needed. But std::as_const() is, to
prevent a detach() (attempt). Add that.
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: If228f649efd87388f6e312078b24a5b46ac8dc36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Drag the QCOMPARE (which even dynamically allocated a QString
fromLatin1()) out of the QBENCHMARK loop. Testing performance of
QString::fromLatin1() and/or qCompare() is not pertinent to the task
at hand, which, ideally, doesn't involve any memory allocations, so
there's at least the chance that this skewed the result noticably.
Didn't run the benchmark as this was developed on an asan build.
Yes, this breaks comparability with the stone-age measurements
reported in comments there, so sue me.
As a drive-by, replace the fromLatin1() with a u_s UDL.
Pick-to: 6.6 6.5
Change-Id: I9b2a8b2e3596ec9b07c6b4ea369257b1a86e09db
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
QDate's constructor can see maxJd() and minJd() without namespace prefix.
QDateTimeParser::SectionNode's name() inherits visibility from
QDateTimeParser of its Section enum's members.
Change-Id: I6315c4ede8875ef725d5b778eebac1e2027cd8b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The code of a class doesn't need that class's prefix to access members
of the class.
Change-Id: I4cc2f72c90cff48b331dc12d390c45c0639606b3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simplifies the code at the call site.
Even though QDebug has support for streaming std::list (SpanList), the
format of the output would be different than what's already used here,
hence the custom operator<<().
Drive-by, port from Q_FOREACH to ranged-for
Task-number: QTBUG-115803
Change-Id: I30953c92e0c9febc01497c1117fa472b4718820e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that the "and" is only seen in enumdata.py and comments, we can
s/And/and/ in all the various territory names that used it.
Change-Id: Ic376d5904b6f5ab54931f96230c1dd5b7f357b8d
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Various comments need to continue using the enumdata.py names, as they
associate data with particular enum members, but we can now correctly
use the en.xml versions of their names when we report them, rather
than the enum-friendly names we use in the code. Since this now means
the data may stray outside plain ASCII - it'll be UTF-8-encoded - this
implies replacing the QLatin1StringView()s of the code that formerly
read this data with QString::fromUtf8().
Fixes: QTBUG-94460
Change-Id: Id3b08875a46af58c0555c3e303b0e15a19441509
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We could already use dashes in some, rather than spaces, and now no
longer need to capitalize each word. This changes the *_name_list[]
entries for affected languages to more closely match what CLDR gives
as their names. It also amends various comments. Added tests for the
QLocale::*ToString() functions to cover the entries changed.
Task-number: QTBUG-94460
Change-Id: I0163795cb282881f15a97be00a5311c1936c3a09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test names and output need to be UTF-8 for the XML data formats to not
end up malformed - which would upset Coin's testrunner, when it
validates the XML as part of checking - and the few other uses of
toLatin1() were to ASCII content anyway, so can harmlessly (this being
test code, where the slight performance advantage of Latin-1 doesn't
matter) use toUtf8() as well, for the sake of uniformity.
Use of toLatin1() broke an imminent commit in which some territory,
script and language names depart from ASCII, leading to malformed
UTF-8 when they appear in test-data-row names.
Task-number: QTBUG-94460
Change-Id: Ifb826b1e417ba24fd862b93d24d0e7a38858a17f
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The former needed the latter's .dupes to do the job, so can now just
take a method as a tool to do the job instead, letting .dupes become
private. In the process refine the munging to free enumdata.py from
having to capitalize each word in its names. This will, in due course,
let us use more natural forms in various comments. This causes no
change to generted data.
Update enumdata.py's introduction doc, mainly to reflect this but also
fixing the out-of-date names (old *_list have long been *_map) and
adding some details to other paragraphs.
Task-number: QTBUG-94460
Change-Id: If195b2e94a53a495fc4f1f216bed07a910439fa7
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Moving it makes it easier to document what it's up to and why, while
leaving __checkEnum() easier to read; and I'm going to need it
elsewhere anyway. This makes no difference to generated data.
Task-number: QTBUG-94460
Change-Id: I684375bc926d5d54928fbf5b5e08978528aef487
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Currently QT_USE_QSTRINGBUILDER is added for all Qt module targets by
default, and it's not possible to remove this definition.
Replace this definition with the generator expression that is
propagated by the PlatformModuleInternal target.
Change-Id: I1c606e16809dc720e2eb72191e1670dfc48f1b48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Currently QT_USE_QSTRINGBUILDER is added for all Qt tool targets by
default, and it's not possible to remove this definition.
Replace this definition with the generator expression that is
propagated by the PlatformToolInternal target.
Change-Id: Iac3bd3ea76e7b439cf7957146b4b6dd20ecdbe3a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since the feature breaks Qt build in some configurations, disable it
by default and make private, so users should enable it explicitly and
make sure that openssl libraries are accessible for linking at build
time by either PATH or LD_LIBRARY_PATH.
Fixes: QTBUG-114783
Pick-to: 6.6
Change-Id: I6eb53c43ed937ec1c0164025bc8953cc5170dc44
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The MIME database appears to use underscore to join its locale tags,
where QLocale::uiLanguages() uses dashes. This meant that lookups by
anything but the raw language were failing even when there was an
entry in the MIME database for the desired locale. Also, since 6.5,
the uiLanguages() list always does contain the locale's own name, so
don't add it to the list again.
At the same time, the search was putting the "default" key (used by
the MIME database parser for the entry with no locale specified) at
the end of the list but macOS (at least) uses that for the "en_US"
version, omitting "en_US" itself from the locale-specific data, with
the result that those using en_US as locale, but with some other
languages later in the list, got the translation for one of those
languages instead of the en_US one, since they were found before
"default" was reached. So insert "default" after the first block of
en-entries in which en_US appears, if it does, rather than at the end.
As a drive-by, amend a comment about using "pt" as fall-back for
"pt_BR"; as it happens, for pt_BR, uiLanguages() will contain "pt" in
any case, as pt_BR is the default for "pt". (Like en, pt anomalously
defaults to a territory other than the one the language is named
after.) So use de_CH -> de as example, instead (and place the comment
where the decision is taken).
Fixes: QTBUG-105007
Pick-to: 6.6 6.5
Change-Id: I1f4835190748256ce53a51321a94ae450ab7f61e
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ElideNone was originally introduced as a way of modifying behavior
of specific widgets, such as QTabBar. The text would previously
always be a elided and an ellipsis character would be added somewhere
to indicate this to the user. Given that context, it makes sense
that the documentation says the effect of ElideNone is that ellipsis
does not appear in the text, since the text would still be elided
if it were too long, given that the painter would draw it clipped to
the widget.
When QFontMetrics::elidedText() was introduced later, this became more
confusing. In the context of this function, you would expect the text
to be returned truncated to the width but without the ellipsis character.
Instead it just returns the full string.
Since this has been the effect of ElideNone since the start and multiple
places use it as a way of disabling the truncation of the string, we
simply update the documentation to make this more clear.
Pick-to: 5.15 6.2 6.5 6.6
Fixes: QTBUG-40315
Change-Id: If037430da6260020b1d99be7bd43e622f8afa844
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A zone may have transitions, none of which is for daylight-savings;
notably, Kiritimati has never done DST but did make a whole-day
transition to move the international date line from its west to its
east. (It also has, before that, the usual transition out of LMT and a
rounding transition from an initial UTC-10:40 offset to UTC-10.)
Change-Id: I5779e965d677cf9698b403d6a11242c9edeac864
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The following commits neglected to amend
tst_QImageReader::supportsOption() with the ImageOption enumerators
they added to QImageIOHandler:
- c0ba249a48
- 163af2cf53
- ba323b04cd
Fix first and foremost by adding the missing ImageOption::ImageFormat
to the list of PNG-supported formats (which, curiously enough, predates
the public history and therefore the above three commits), and second,
by rewriting the whole test function to enable -Wswitch, so further
additions are less likely to be forgotten.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I102121b2c8a9067864b8ade2ebe2650be6fb6010
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
[ChangeLog][qmake] Allows to override _DATE_ with SOURCE_DATE_EPOCH
to make builds reproducible.
See https://reproducible-builds.org/ for why this is good
and https://reproducible-builds.org/specs/source-date-epoch/
for the definition of this variable.
Fixes: QTBUG-115737
Change-Id: I1964aa0a3d849628440618aa6f0a51af2017d824
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
