QMake always places makefiles, including vcproj files, to OUT_PWD.
BUILD_DIR i.e. QMAKE_RESOLVED_TARGET refers to location where target
is generated. If TARGET is specified in pro file with path, such as:
TARGET = ../../debug/tst_qlocale
The QMAKE_RESOLVED_TARGET refers to that path, and it differs from OUT_PWD.
Because Visual Studio requires a design-mode manifest in the same location
as the vcproj, resolved BUILD_DIR separately based on TEMPLATE.
Change-Id: I8dbaa862a5f53ac168f4643c17baabd7b4f0287d
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since there was no extension specified for static libraries then it
would end up not being able to build Qt at all.
Change-Id: Iec9040640ba399544b86df27e370fcf23cabb4de
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It may be much faster through the CI system that way.
Change-Id: Ib5e3a438bd2ac98dd0a3806cedba152f25e219d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If one doesn't set CONFIG+=neon in it's mkspec but the compiler enables
it, Qt fails during linking of libQtGui,
because simd.prf isn't executed as needed (doesn't run into neon{..}).
Although a mkspec which enabled neon (-mfpu=neon) without CONFIG+=neon
could be considered broken,
it's still simpler to just 'fix' Qt to not fail unexpected.
Follow-up to e5066a3a2e
Task-number: QTBUG-37264
Change-Id: I3aa0afbe430547971e76c2c988697c133d69796b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds a new config option to qmake to enable full optimization
where it makes sense. This currently is supported on all gcc like
compilers by exchanging -O2 for -O3.
In qtbase it is used to enable full optimizations on qtcore and qtgui
and in a later patch can be used to replace similar existing logic in
QtWebKit's WTF and JavaScriptCore modules.
This fixes a performance regression from gcc 4.7 to 4.8 in the software
renderer.
An aliasing error in qregion.cpp which was exposed by more aggresive
optimization has been solved as well.
Change-Id: Ic2c6c41b79cb3846212b40e7bcc11ff492beb27f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of checking for dynamicgl in QT_CONFIG, which is apparently
not possible, revert them and do it in opengl.prf instead.
Dynamic GL is Windows-only for the time being so this should be sufficient.
Change-Id: If293ea4c9b024df52257086c8b6250602a44724d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
When this macro is not defined, a number of inline methods in the MSVC
stl will throw exceptions. This in turn generates a warning when
exceptions are not enabled on the compiler command-line.
Change-Id: I5a57ec544bda0c75f04fdea9412b03107f9ff531
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
let the syncqt + qt_module_header.prf pair handle generation of
forwarding headers.
in qtbase this is ineffective to some degree, as the need to create
QtCore's forwarding headers early for QtBootstrap requires qtbase.pro
already doing the real work, but at least we get the verification that
nothing breaks.
Other Modules (TM) will need the full functionality.
Change-Id: Ifd3dfa05c4c8a91698a365160edb6dabc84e553f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This comment is wrong and should be removed. The manifest is always
generated.
Change-Id: I281737dd6a358380fb557063eadae88909f5078b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The index is only helpful if the version of GDB to
create it uses the same version as the GDB version
that consumes it. Outside the "local development"
scenario this happens only by conincidence, still
we add ~3.6% to the debug library size and face
maintenance issues like QTBUG-34950.
We also don't see the same performance benefit anymore
with recent versions as we did when the feature was
added, so it's best to not create the index anymore.
People who need it, still can add it manually, or
by the 'gdb-add-index' tool that comes with recent
versions of GDB, or trust their distributors to
set up indexes matching their runtime environment.
Task-number: QTBUG-34950
Change-Id: Id4c79fa51fea9622b0891bd9b9b395b948ecb157
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
ICC 8 and 9 are positively ancient. I doubt anyone is using them for
Qt, let alone Qt 5. ICC 11 through 13 haven't supported OS X.
ICC now masquerades as Clang, so we need to let qmake and
qcompilerdetection.h know about it.
Change-Id: If0d2bd8b6a4a45250c15c9472c062effc76f17de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
There's a bug found in ICC 14.0 that causes the compiler to assert when
compiling QtDeclarative. Let's leave this here until at least one year
after the fix is released.
Intel task: DPD200253124
Task-number: QTBUG-36577
Change-Id: I76d4b41da7e60397dac65862a3a6ec024b840744
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For normal #includes, moc simply ignores the missing file, but it could
generate problems later. It's a problem when the file being sought is
the FILE from plugin metadata. A very good example of this is Qt
Creator:
coreplugin.h:49: Error: Plugin Metadata file "Core.json" does not exist.
Change-Id: I16af04b477f52c6bd53c14147ec777b358dfdf50
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add the required printsupport plugins to the QTPLUGIN variable
as is done for the QPA plugin.
[ChangeLog][QtPrintSupport] Made the Qt buildsystem automatically include the
necessary plugins so that static applications can print.
Task-number: QTBUG-29663
Change-Id: I0e2e3b0f25dd5714bd187711c85893926b0c4e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using the same architecture value in VC Project and manifest
files only makes sense for x64. Instead of doing magic we
just set the correct values inside the mkspecs. VCPROJ_ARCH
is used for Visual Studio, while the manifests use
WINRT_MANIFEST.architecture.
WINRT_MANIFEST.architecture was added to x64 mkspecs for
consistency and phone mkspecs do not use WINRT_MANIFEST.architecture
so it does not have to be set there.
Change-Id: I009473104875b4add8c0530dc6f51177919e997b
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
http://msdn.microsoft.com/en-us/library/b0084kay(v=vs.120).aspx says:
__AVX__ Defined when /arch:AVX is specified.
Now we know what flag it is, we don't need to use our _M_AVX flag
anymore. We're also now assuming that Microsoft will follow the same
pattern for AVX2 (i.e., __AVX2__), so this commit also removes the
check for _M_AVX2.
The other defines that were defined alongside AVX2 are removed because
they have no use currently in Qt.
Change-Id: I64a026b2206dbd0d2dffa7c803bee969c9b94a94
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this hasn't happened yet at this point of processing, so we'd pass bogus
paths when shadow-building.
Change-Id: I9f9633c0dbc2aadeff1eb555a8e598ddb0837e37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the compiler may choose libc++ based on the deployment target,
and we'll end up with broken builds due to the mismatch between the two
libraries, eg:
Undefined symbols for architecture x86_64:
"std::ios_base::Init::Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::ios_base::Init::~Init()", referenced from:
__GLOBAL__I_a in libQt5Qml.a(qv4object.o)
...
"std::__throw_length_error(char const*)", referenced from:
...
This problem is not iOS specific, which is why the logic is moved
to the more generic mac/default_post.prf.
Change-Id: I28b94e614f9167fc0db84bbf1c88dd97d5629938
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of sprinkling '!ios' all around the various modules. This is
a bit more fine grained than the CFG_NOBUILD_PARTS += "tests" that we
had in configure.
Change-Id: I6ca2e5df118dfc0bb5d7b8495a3543f51dc0fa30
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This feature (package_manifest) generates a basic application manifest
from a template provided by the mkspec or the developer. It is meant to
deliver an out-of-the-box build experience without attempting to
exhaustively cover all manifest options. It is meant to be a starting
point which allows the developer to customize the manifest further. It
also becomes the default package manifest generator for Windows Phone,
replacing autogen_wmappmanifest.
Common variables, such as the target executable, are populated by qmake
in the newly created manifest. Default icons are also created if needed,
as the build will fail without them. The input manifest can be set by
assigning a file name to WINRT_MANIFEST. Additional options are
documented in the .prf file. If an existing (non-generated) manifest is
already in the directory, it will not be overwritten.
Task-number: QTBUG-35328
Change-Id: I57576a17ff9d2b564c0828f815949cb26d276bfd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
clang is the default compiler on FreeBSD 10 (if not earlier).
Let's keep it unsupported for now. Can be promoted later.
Change-Id: I909953c986a3da09ce19d8f9f9ee2cc22c417abd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Dwarf-2 is treated as deprecated (at best) by llvm, and does not support
a lot of C++ language features. Most notably, it does not support
namespaces and template parameters. By not specifying the dwarf version,
the compiler can decide which version to use.
Change-Id: Ic32f9101c4db0f06a8ace8f5e04af9236d01598e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Added a define to suppress MSVC warning “C4996:
This function or variable may be unsafe.”
If the code is really "unsafe" then it is unsafe on
other platforms as well; so fixing these warnings just
for MSVC builds, would clutter the code and wouldn't help
in fixing issues that might exist on other platforms.
Using the same functions across all supported platforms
keeps the code clean and helps in writing code that is
safe across all platforms.
Change-Id: I470072eda4f8174bb911567ef3f061a3582ba449
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For some reason the Raspberry Pi hook includes qeglfscursor.h even
though it is not necessary. Remove this because the file got moved to
eglconvenience.
Change-Id: Ia65f5a8366d750f93eacee49004219e664b52af2
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
the newly added mac examples use it, so it needs to be grounded.
a more generic solution would be clearing out QMAKE_EXTRA_COMPILERS, but
many prf files will be loaded after us, possibly nullifying our effort.
Task-number: QTBUG-35680
Change-Id: I3aba7595898baac14bd41e9fae2ff24507187c6a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to compile grammars at build time.
Change-Id: Ia74383c4f29873ee7324bd5f14d72ef14faef460
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 3c375a76a1 enabled SSE2 in Qt,
but we failed to build the files that implemented the SSE2 specific
drawhelpers and image functions. Since we know what the iOS simulator
supports and the platforms it runs on we can safely enable this
ourselves without it being based on a configure test.
Change-Id: I0cfc43de80068b89aa47c34ffa84ee1c1734886c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Static builds of Qt will automatically enable C++11 for all projects,
but this happens in mac/default_post which is after our check.
Change-Id: I22a01e5d876242263fa31f8a404a65905c6c1877
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Right now /dev/fb0 is hardcoded. This is not ideal. Therefore
QT_QPA_EGLFS_FB is introduced. This environment variable can be set to
a different framebuffer device. Once it is set, eglfs will use the
specific device. This is similar to linuxfb's fb=... plugin parameter.
The actual behavior depends on the board-specific implementations.
For now only iMX6 has real support. It extracts the index from the
device name as bind the EGL display to the corresponding framebuffer
using the vendor-specific fbGetDisplayByIndex(). Other hooks can
follow suit later on.
With this patch eglfs is at least on par with linuxfb, meaning that,
if the board supports it, different apps can run on different screens.
Task-number: QTBUG-36113
Change-Id: Ia3c88bd06e108bc668433e3c5c3fce34a5a0e73d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Those paths need not be in INCLUDEPATH: qmake always adds them to the
compiler command-line and we should match the behavior if we expand
INCLUDEPATH here.
Change-Id: I89508d15ac534b54ae873a42c4ad9764408042b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...unless the user passed the -no-sse2 option to the compiler.
[ChangeLog][Important Behavior Changes] Qt now automatically generates
code for processors supporting SSE2 on i386 platforms. To disable
this, pass the -no-sse2 option during Qt configuration. Since this
feature has been present on CPUs for 10 years and since Qt no longer
checks for runtime support for SSE2, we strongly encourage users to
leave the default setting on for best performance.
- For Linux distributions that must retain support for CPUs without
SSE2, we recommend doing two builds of Qt and installing the
SSE2-enabled libraries in the LIBDIR/sse2 directory. Tools,
plugins, and examples are not affected.
- See discussion on the Qt development mailing list:
http://lists.qt-project.org/pipermail/development/2013-November/014085.html
Change-Id: I7f9b1f58a9f66b6e5fe295bac15f87d34343695e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Now the only way to enable Neon support is to change the mkspec.
[ChangeLog][Important Behavior Changes] Qt no longer checks for
support for the Neon FPU on ARM platforms at runtime. Code optimized
for Neon must be enabled unconditionally at compile time by ensuring
the compiler supports Neon. You may need to edit your mkspec for that.
Task-number: QTBUG-30440
Change-Id: I4df9b2bf3cd022f8ed70f02f16878cb2cb3fe6fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
