When using the cross-compiler toolchain for 32 bit on a 64 bit machine,
qmake generated a 64 bit VS project.
This was because qmake didn't know about the amd64_x86 cross-compiler,
and qmake did not use the first MSVC bin directory it found in PATH.
Task-number: QTBUG-43457
Change-Id: I50c6f7bb9afe44a58321c670d680dbcc7cd07223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In ancient times, the existence of QMAKE_RUN_CXX_IMP determined the
use of implicit rules. The code path for implicit rules was turned
off in 2006 (0287fe3c), which probably was a refactoring artifact.
Later, implicit rules were enabled again using a different approach.
These days, the non-existence of QMAKE_RUN_CXX determines the use of
implicit rules.
We remove the dead code path now and rely on the latter condition.
One part of the dead code is a feature that turns off inference rules if
the OBJECTS_DIR is set or source file names do not match expectations.
If somebody ever missed this, it has been reimplemented otherwise.
Or not.
Change-Id: If3ce9904d9c1df6e4048c58c2452854cce7fa206
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead of trying to load in ltcg.prf and cache the value.
Change-Id: If485ff68fc6ff9d9cf7009cd72d5e702d0199c7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This just reindents and makes it easier to read what's going on.
Change-Id: Id0afcdfb8f468b4553bba8c5a572a1d0115b0886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is not used or referenced anywhere
Change-Id: I02e1aa76631627f64e5d1f9b36a13cdb5677e93f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These mkspecs are not supported and no longer compile. Related support in
qmake has also been removed.
Change-Id: I7706dcfa5471e55e2ae3d580d65e9371e2c652d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Tested with the Preview release of November 2014.
Differences to the 2013 detection and support:
- Option -Zc:strictStrings is present in both debug and release mode
and is passed to qmake's own build
- New warnings 4456, 4457 and 4458 (shadowing) are disabled
- Compiler supports -arch:AVX2
Change-Id: I9572ff4d4aded4004c1fa5d6f13ffee5462043d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On Windows, the application manifest file can be linked with the
executable, to specify for example the requested privileges of the
application. On MSVC nmake, the manifest is already handled in
NmakeMakefileGenerator::writeBuildRulesPart, but it is not compatible
with MinGW. On MinGW, this manifest file has to be referenced in the
Rc File. This patch simply handles the existing variable
"QMAKE_MANIFEST" which defines the appropriate line RT_MANIFEST in
the RC file.
Task-number: QTBUG-42454
Change-Id: I921606e002ffe3801c537f30ac2365891f97d5c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Running 'make distclean' should remove all files generated by qmake,
including .qmake.stash/super. These files are considered owned by
a particular project (and hence a candidate for distclean), if it
lives in the same directory as the output dir of the project.
Task-number: QTBUG-42678
Change-Id: I224e9bac039eeacb6561e18acc7f8e867da5dab8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We don't need to modify ResourceOutputFileName. The default is fine,
and $(InputName) evaluates to nothing in VS >= 2010.
Change-Id: Ib203d36261e1b5449c5a139b1950bd0d66197297
Task-number: QTBUG-43026
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This fixes a regression introduced by
04d3a89e20 as it left out the custom build
step for the source code file generated for PCH.
Task-number: QTBUG-42596
Change-Id: I53d5a36b842dcffbde2657910e6a96dca0e99c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With multi-architecture builds and ONLY_ACTIVE_ARCH set to NO, Xcode will
build the final target for multiple architectures at the same time, but
CURRENT_ARCH will only match one of them, so we failed to set up the
right dependencies for our pre-link step, causing the step to happen
after linking in some cases.
We now build an exhaustive dependency list based on QMAKE_XCODE_ARCHS,
so that ONLY_ACTIVE_ARCH=NO can be used for release builds targeted at
the App Store.
Change-Id: I6702f020a6970807adc624779f6dde09be62beb9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Refactor the current app CFBundleIdentifier support:
handle frameworks as well. Add @BUNDLEIDENTIFIER@
placeholder to the OS X info.plist.lib templates.
This means the Qt frameworks will now get a valid
CFBundleIdentifier entry the same way as app bundles:
by extracting the identifier prefix from Xcode settings
and appending framework name.
Task-number: QTBUG-32896
Change-Id: Ica8f28332a88e37a823c46fca7a2c373157af020
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since commmit 0127962e47 the
PBXResourcesBuildPhase is used only for ICONS, because the old
behavior of using it when target path is not given differed from
the documentation and behavior of the makefile generator by using
Contents/Resources as target directory when targeting osx.
The PBXResouceBuildPhase optimizes png, compiles xib or asset catalogs
and copies the rest.
The advantage is that it makes it easy to add resources to the bundle,
the only problem is that the target directory is always the resource
directory.
The copy operation currently used does not compile resources, which
makes adding .xib (for the Launch File required to support iphone 6)
and asset catalogs difficult.
So we restore the old 5.3 behavior for ios, and use the build
resources phase when possible on osx (target Contents/Resources).
On osx this still implies a difference between the makefile
generator and the xcode generator: only the latter compiles resources.
Change-Id: Id1853693e88fc46562b044efdea2bf5f9da2c98c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The settings of the librarian were never written.
Creation of static libraries only worked by accident.
Adapted the code from the vcproj code path.
Task-number: QTBUG-30712
Change-Id: I69917f44305eb458647392d222db477fe5a5b7c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Second attempt. MSVCPROJ_TARGET contains the resolved target name,
including version number and target extension.
We're splitting this value into PrimaryOutput and
PrimaryOutputExtension.
PrimaryOutputExtension is only written if it contains a non-default
value.
Task-number: QTBUG-26782
Change-Id: I4b828dc5dd47322f653585aee1a5767f0cf8bd48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit af760349 in Qt4 broke the possibility of having a
PRECOMPILED_SOURCE in a different directory than the
PRECOMPILED_HEADER.
Do not write the PrecompiledHeaderThrough value for the
PRECOMPILED_SOURCE, but use the project default.
The msbuild code path needed adjustments to write the
UsePrecompiledHeader value, even if PrecompiledHeaderThrough is
empty.
Task-number: QTBUG-41917
Change-Id: I74e621f6618cf056e3967c99a2215f76c346b9ee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 4f21eb03 utterly broke the project file generation for
VS 2008. The introduced filterByName convenience methods looks for
filter names like "Generated Files", but the code path for
VS <= 2008 used filter names like "GeneratedFiles".
The generated projects were valid but empty.
This commit ensures that both VS generators use the same filter
names.
Task-number: QTBUG-41821
Change-Id: I828fa911bae8d835b073a4c2260316127cc72cda
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
That's why the original code tested the filter names with
QString::startsWith.
I've changed the signature of outputFileConfigs to take a filterId
parameter which contains the unaltered filter name (e.g.
"Generated Files") that will determine the correct filter.
Task-number: QTBUG-41746
Change-Id: If33428526a098f433cd6ceb8ab6608bd9f94ef17
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise we'll produce lines with tens of thousands columns when
dealing with QMAKE_BUNDLE_DATA.
Change-Id: Ia2a70f25e4ee1d3fe976027a7c46d234809a3f70
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
According to Apple's documentation [1], framework bundles don't
have a 'Contents' folder. Instead, each version folder gets a
'Resources' folder which contains the Info.plist file, and which
is also symlinked at the top-level framework folder.
[1]: https://developer.apple.com/library/mac/documentation/macosx/conceptual/BPFrameworks/Concepts/FrameworkAnatomy.html
Task-number: QTBUG-32895
Change-Id: I5e55cc097b179012add0ceb7c567dace8e282895
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
the target path may have multiple components, e.g. Headers/private.
obviously, only the first component must be linked in such cases.
Task-number: QTBUG-32895
Change-Id: If632b3b72c170a9fde36e62c165e06ded53deda3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
multiple QMAKE_BUNDLE_DATA entries can install into the same directory,
but it obviously makes no sense to symlink that repeatedly.
Change-Id: If65f7acdf4e158e33511917a027a380e642e2f28
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
instead of duplicating the plist/icon/bundled_files logic just to obtain
the dependencies, create them as a side effect of the actual target
creation.
Change-Id: I6a0fe26c82c490b1040a7a06d5d0e7a4567ae1af
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add @FULL_VERSION@ -> Qt version substitution to
unixmake2.
This makes the Qt-generated Info.plist files compliant
with the bundle signing/validation process.
Task-number: QTBUG-32896
Change-Id: I1818f028c2f740d699629dd78cc0fe6ffaf94a1c
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We do so by setting a 'no_plist' config property. Can be overridden
with 'force_debug_plist'.
The debug version of Info.plist would overwrite the release version,
and it also happens to contain invalid data. In particular,
CFBundleExecutable would contain the _debug suffixed libname, which
it shouldn't. See the entry about CFBundleExecutable on
https://developer.apple.com/library/ios/documentation/general/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
Task-number: QTBUG-32894
Change-Id: Ideb018e4768a7c4e276e1b07d77937451f6db6a2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
this allows us to extend its dependencies, which we will make use of later.
Change-Id: I8809bdffb435455338e88e97049b10beeab0468a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's a comment in VCXProjectWriter::outputFileConfigs that
states: "We need to check if the file has any custom build step.
If there is one then it has to be included with 'CustomBuild
Include'".
This patch adds the code to the comment...
Task-number: QTBUG-30373
Change-Id: Ibfef3c80630e08c743bfadce299a8b6a0c58411f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Move common code into a function
and exit early from simple search loop.
Change-Id: I88d1227653e28badc213fbe4ebe1e2a19f6e5793
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The static CRT, libcpmt.lib, is not shipped with Visual Studio Express
for Windows (unlike VS Express for Windows Desktop or Professional
versions), causing configure and qmake to fail linking if this is the
only VS installed. By removing -MT (which is on by default) and adding
$(CFLAGS_CRT) to the compiler line, -MD can be added to the compiler
flags via the environment, providing a workaround for the issue.
Change-Id: I5613346d60a3a1889c121f04d53b09fbb147fc02
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Those initializations are done by the constructors already.
Change-Id: Ife58675e2ba4854ef66c813158cb4ed660f530d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The fileAdded variable is used to save state between iterations.
There's no need for two variables.
Change-Id: I8144cf7c7b394255459295b82a7ca808bc3951da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't need the filtername parameter.
Change-Id: I653db4a200c83d095520b47e1451dfe59b956d92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Files in "Deployment Files" should be added as static content, which
happens to be the fallback in the case where checkDeploymentFiles is
false. Also, the calling code expects that an XML tag is added in all
cases. This did not happen for the "Resource Files" filter when
checkDeploymentFiles was false, which led to unmatched closing tags.
This fixes the issue that files added to RESOURCES in different build
variants produced invalid vcxproj files.
Task-number: QTBUG-30373
Change-Id: Ibb27e67641ba63150938cf826ea1881d182fb841
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Put common code into a function.
Subsequent patches will become easier.
Change-Id: I0d549886585d90e4701a2430503bc0d2d716e341
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Make use of the mythical C++ feature "function" to soothe the brain ache
of anyone who looks into this part of the code.
Change-Id: I740e29f1777d91d3b34a61fa62a5c23c222334b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If creating an asset catalog from Xcode, Xcode will
add it to the "Copy Bundle Reources" phase, if it exists.
Since we don't always generate that phase, Xcode will
silently fail with the result that the asset catalog will
not take effect (no icon, launch images etc).
This patch will ensure that we always create the phase
(like native Xcode project does), which will fix the
problem.
Change-Id: Ief949d63543977f1021db992e0c41714d898e68b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When the user adds a compiler option that qmake doesn't understand, a
warning message is printed. One can suppress these warnings now by
adding CONFIG+=suppress_vcproj_warnings to the project file.
Task-number: QTBUG-37520
Change-Id: Ieb7ad2c900329e76636047dff85824ea0456f608
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Gestalt is deprecated so we can't use it long term. At the same time,
the new API is cross platform, so we'll no longer have to parse strings
in -[UIDevice systemVersion] either.
Change-Id: Ic81797174c1a3d50b47b9b209205a6a506cc75ef
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
-qtdoc repo uses "OS X" instead of "Mac OS X" and this caused
broken links.
-more comprehensive change still needs to be done but the new
name is used in the page to maintain consistency. At least within
the page or class.
Change-Id: I8a5650046fc0413cbb18359b743ecd30fd62e417
Task-number: QTBUG-40759
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
If defined, the value of this variable is prepended to the built shared
library's SONAME identifier.
For more information, see: qmake/doc/src/qmake-manual.qdoc#qmake-soname-prefix
Task-number: QTBUG-31814
Change-Id: I4bceaf0c93162e4fad6bb424af1b82e74d38acdc
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Defaults qmake behavior is to make all project RPATHDIR paths absolute prior
passing them to linker. We need to make an exception for paths starting with @
such as @executable_path (Apple platforms) or $ such as $ORIGIN (Linux).
Task-number: QTBUG-31814
Change-Id: Ie9887c0046c5030c4128dda945b491a5d389ba34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Xcode uses project and group relative file paths, but to keep things
simple for ourselves we use absolute paths everywhere. We now make an
effort to actually make these paths absolute before telling Xcode they
are.
We also make the visual representation of the files inside Xcode be
just the filename, not the full path, like Xcode itself does. This
is among other things a prerequisite for Xcode to stop complaining
about missing launch images for retina 4-inch screens.
Change-Id: I5ff6bf07f61888e3c9fe2f64cbc2beb896b8442d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We build "Supporting Files" out of QMAKE_INTERNAL_INCLUDED_FILES, which
is really not supposed to be exposed to the user like that, but since
the variable will hold user-included pri files eg., the Xcode generator
piggy-backs on this variable to list the files.
To make the project view in Xcode a bit cleaner we explicitly exclude
any file living inside the Qt directory, meaning we won't show all the
pri and prf files from Qt's mkspecs directory anymore.
Change-Id: I828700aceac5fdf3ea2b27d9ba3885543c2ad137
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
all else being equal, items with a higher numerical priority will appear
first in the result.
Change-Id: I4ee37ff404a53c4152a1e4fc2fc3c23ef525234d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the c'tor always determines the group itself anyway.
Change-Id: Ia8f1e747aaefdab164beae34851aa99cec9b790a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
At the very least, include the files named in the sources, like
HEADERS. It was quite surprising to send a tarball that included the
.pro file and the .cpp sources, but none of the headers.
On the other hand, the .qmake.cache file need need not be sent either,
despite being include()d in qmake's processing.
Change-Id: I8f48ca3e8040f954f321f4643b01c0f36aafe2d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With MSVC it takes minutes to compile pbuilder_pbx.cpp.
So let's remove this generator that's never used.
Change-Id: I13038d551283d96dfb0baf0b8a8a68c6538193c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Better late than never.
Change-Id: If3bbeb4dfe3a8d49ceb02d9c2d0f2eff71595105
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This file is already listed in QTOBJS.
Change-Id: I5c77620dc5e441435bd31a87a08178e0c82e9c05
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows to use the "test mode" of QStandardPaths in unittests,
to stay away from the user's real settings.
Change-Id: I1cb1f63a4bff35dfe236924c4dcd7cf761ee50c1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Depending on *.o in the Xcode output dir did not actually result in a
proper dependency. In Xcode5 this didn't matter much, as the effect was
that the build phase was run every time, but in Xcode6 the phase was
skipped. We now depend on the object directory itself, which will get
its modification time updated to match any rebuilt object files.
Change-Id: I8fa6f06c9008c4ce8f7fde7706057ce101bb5727
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
url is set in qtbase/doc/global which is inherited by the
Qt 5 module qdocconf files.
Change-Id: Ieffa174f598f4a3b8ce8be9bfae7ca9b6981f12b
Reviewed-by: Martin Smith <martin.smith@digia.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
msvc thinks that it's impossible to create a null reference (because
some language lawyer said so) and thus complains about our assert that
checks the reference's validity. work around by not dereferencing the
pointers we already have.
Change-Id: Ife2288d4187860105de12fdebc0e671e0159ace3
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
When a relative path was specified as the output then it would be in both
Option::output_dir and Option::output. Therefore in that case
Option::output should be just the filename as Option::output_dir has the
correct path to output to.
Task-number: QTBUG-39460
Change-Id: Idc988e6bad94f34b89660fb5e8d6fa3a39dc623b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The original dist target no longer copies files around, but
merely does the final packaging. It depends on a new recursive
distdir target, which handles copying distfiles to the distdir.
[ChangeLog][Tools][qmake] Added 'make dist' target for subdirs
projects (unix only)
Task-number: QTBUG-21910
Change-Id: Ib59139c3fe196caf832d8dcefab484ab91f1f5ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A typo caused qmake to stop output dependency information
added by the depend_command clause.
Task-number: QTBUG-13334
Change-Id: I00fabc87438ce94e80341e6f88aa2e0eaab57e19
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch removes the need for the user to put a dot at the end of the
bundle prefix which makes it's use more consistent and intuitive.
The prefix is based on what Xcode calls the "Company Identifier",
basically "com.digia" plus the product name. Changing that to
"com.digia.prefix-" and the product name to "Foo" results in a bundle
identifier of "com.digia.prefix-.Foo" which is in line with Xcode.
Change-Id: I9b62fc4dee1df51b523ce890a8896ea58ea2c62d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of sometimes ending up inside Content/Resources. The two build
phases PBXCopyFilesBuildPhase and PBXResourcesBuildPhase have different
semantics of where to place the files. For the former we use the root of
the bundle as the destination, and this is how QMAKE_BUNDLE_DATA is
documented and used, as well as how unixmake2.cpp implements it. The
latter on the other hand, always ends up in the resources subdirectory
on OSX.
Task-number: QTBUG-35318
Change-Id: I45bbd0dfe7ea78ae330ecb0c91efa74e1c76c9eb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The ICON qmake variable is implemented in the Xcode generator through
the ProjectBuilderSources::files() function, where we append the icon
to SOURCES (for some reason). This means we can't exclude non-object
sources when writing out PBXBuildFile entries, as the icon file entry
is referenced later on in the bundle resources phase.
This is a partial revert of 66f6e5b162 which introduced the broken
logic.
Change-Id: I120d2325165a1eefd3961a9162e9e5eb3a576c36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This injected quite some code on every use of qDebug and friends,
while not giving any measurable performance benefits.
Change-Id: I7b51f99130f18f1252da01e313f7b97c43a5480d
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
If the project has a custom Info.plist assigned to
QMAKE_INFO_PLIST, we should leave it as-is without
scanning and replacing contents inside it. Since we
always copy the file to the build folder at qmake
time, any later attempts to modify the source file
will not have any effect.
A better solution is to just reference the custom
plist directly from the Xcode, without modifying it.
This change will also stop unixmake2 from assigning the
default plist to QMAKE_INFO_PLIST, since we need to
know in the xcode generator if the variable was set in
the project or not.
Task-number: QTBUG-38260
Change-Id: I3c488b2960170c544d94f9db89d3ca95ee290bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Qmake tried to extract the actual executable part of an
extra compiler's commands and depend_command value and
then "fix" it by replacing the directory separators in
it with their local versions and calling QDir::cleanPath
on it.
This misfeature was implemented incompletely and led to
unexpected results (see the numerous attempts to fix
QTBUG-16372).
The user is responsible for passing a correct command by
calling the shell_quote or shell_escape functions if
necessary.
Change-Id: Ic4bfe9eeb697775cd99c865e7a9d335e63605dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This fixes a warning when loading qmake.pro in Qt Creator on OS X.
Change-Id: Iabd70f2b5b9615d0fb1563081f485e6a4c828823
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A pro file that adds files to QMAKE_BUNDLE_DATA using relative
paths will fail building if doing shadow builds. The reason is
that we look for the files inside the build dir.
This change will make sure we resolve files from the source dir
when not using full paths.
Task-number: QTBUG-37054
Change-Id: Ic1067861097b3b6a640ee862472d728d6188576a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the msys shell expects unix-like paths with drives converted
from d:\ to /d/.
Change-Id: I09e25ed2c868702e5d7d8b9cc8c04cc13410eeff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows the developer to provide a list of languages to the manifest
by listing them in WINRT_MANIFEST.languages. It also allows setting the
default language with WINRT_MANIFEST.default_language.
Task-number: QTBUG-38557
Change-Id: I5cb94c9f45146e3068d0833b9e669dc17dca14b2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
f412f2b5 refactored the platform tool set retrieval, but made the
call too early to choose the right tool set on Windows Phone. This
fixes the call so that it does not depend on the WinPhone member variable,
and also makes it forward-compatible with Windows Phone 8.1.
Task-number: QTBUG-38516
Change-Id: Ide91563f5c7f909c4d1a258adc29af6c94595dc9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it needs neither native separators, nor a trailing separator.
the QMAKE_PKGCONFIG_INCDIR default was already ok.
Change-Id: I1048b3870fd3ca09aa76b41aecda7d90402aa64a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
fileFixify must not be called twice on the same file path, since it will
convert an absolute path from the shadow build to an absolute path in
the source dir. The first fileFixify occurs in MakefileGenerator::init,
along with the fixifying of INCLUDEPATH.
Change-Id: I607870573a80eaf834ea5f540bbe1451ec983114
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In a subsequent commit we will need access to more information of the
project object. This is merely a refactoring.
Change-Id: I40e501d037eb7d0295e1057e7b86e404e88e6ca3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since VS 2012 the linker supports the /MANIFEST:embed option, which can
be used to embed the automatically generated manifest without calling
mt.exe. Using this feature simplifies our generated makefiles, esp. in
the case of incremental linking.
Task-number: QTBUG-37363
Change-Id: I2c2d8d2abf36c1b9e7b41bc15244344aab8f5b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Basically a copy of the inline documentation inside the prf file.
Task-number: QTBUG-37788
Change-Id: Ie6df1597297223be778c748aad525f5521232cb7
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This is useful for querying environment variables which have
parentheses in their name. Such jewels exist on Windows.
The usual $$(VARNAME) syntax fails for those.
Change-Id: I1d2766cabdc7f637caa9ae6408967685e02f5029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's QT_INSTALL_CONFIGURATION, not QT_INSTALL_SETTINGS.
probably the most useless of all properties, but anyway.
Change-Id: Ia1e739ab4ed59e2bcd3199914caed2b3db9070ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove definition QT_EDITION which was set in configure
since it is not used anywhere anymore.
Change-Id: I5c30ab47c6244fcb07707fd05e11decf2068f6d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Windows SDK 7.1 command prompt sets this value to "WindowsSDK7.1"
through its SetEnv.cmd batch script. The MSVC Express Editions do not
include a 64bit compiler toolchain, but the Windows SDK does, so this
change makes it easier to build qmake projects for x86_64 when using
the Express Editions, by running qmake from the SDK command prompt.
See also:
http://msdn.microsoft.com/en-us/library/9yb4317s%28v=vs.100%29.aspxhttp://msdn.microsoft.com/en-us/library/ff660764%28v=vs.100%29.aspx
Task-number: QTBUG-31185
Change-Id: I49d3e159ed67f64490a3d57c5471d540d76ae13f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When running a amd64 VS shell we must not call the x86_amd64
cross-compiler, because it won't be able to start.
Instead we're calling the native amd64 compiler now.
Change-Id: I6968cde3b24c1938b6e0d82f513e49724455f3cc
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently the bundle identifier is build using com.yourcompany +
QMAKE_BUNDLE. This patch adds the handling of
QMAKE_TARGET_BUNDLE_PREFIX to build the bundle prefix.
Task-number: QTBUG-19006
Change-Id: I014279da6dbef393b0df36f6d4995e40ab105316
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
/FS forces the compiler to synchronize pdb file writes.
This option is not needed when building with Visual Studio itself.
Still, qmake needs to know it when parsing the compiler flags.
Task-number: QTBUG-36535
Change-Id: Id5b68c4028844e0b95904e08b5121310a4ff13d6
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This was broken for shadow builds. Adding the output directory to the
manifest file name fixes the problem.
Change-Id: I9e5b47a08f80f7afcfd76e13784fbaec912e50ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If VCPROJ_ARCH is not recognized or unset, make "arch" default to x86,
or link won't find the libs.
Change-Id: If2cbda37a80c0fa43e1464775c036cebf10f931a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When MSVC supports ref-qualified members, we need to ensure that
qstring_compat.cpp can see the non-qualified definitions in qstring.h,
which means no precompiled header.
Alternatively, for a bootstrapped build we could not compile
qstring_compat.cpp or #ifndef the functions.
Change-Id: I8ece34503060f0b4b0f8f2df2fb9b0fb1311e269
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In release configs qmake sets DebugInformationFormat to None.
If ProgramDataBaseFileName is left unset, then VS 2012 will always
rebuild the complete project. Therefore, qmake now inserts an empty
ProgramDataBaseFileName tag if DebugInformationFormat is None.
Task-number: QTBUG-35570
Change-Id: Ifb91b0bbcf6614621bfe3b12429e2624bd16e77a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VS 2010 doesn't denote "no debug info" as "None" but as empty tag.
This fixes a regression introduced by
7c3efdfb6a.
[ChangeLog][qtbase][qmake] fix VS 2010 project file generation
Task-number: QTBUG-35610
Change-Id: I18ae69a842d0b679a781f8d24c026d422da3a857
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Assume that C and C++ headers found in system paths will not change,
so we don't need to tell Make about them, nor do we need to scan their
contents either.
The previous qmake behavior matched gcc's -M switch; it now matches
the -MM switch:
-M Instead of outputting the result of preprocessing, output a
rule suitable for make describing the dependencies of the
main source file.
-MM Like -M but do not mention header files that are found in
system header directories, nor header files that are
included, directly or indirectly, from such a header.
This goes hand-in-hand with our use of -isystem to pass system paths
to the compiler.
Change-Id: I3346b6da496fe6495ac89c5286d066b343116f0e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it leads to pathological cases where the number of loop iterations may
go way beyond the reasonable.
this means that users need to avoid using the = operator in alternative
branches that lead to different sources/subdirectories being included
into the project. this is a bit of a corner case anyway, as people
usually add directly to SOURCES/SUBDIRS.
Task-number: QTCREATORBUG-1595
Change-Id: I7783e318fbc2790f6a853ba4e3f4a12db881feb5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/30bd7fcce1aef974f6af9eaa6532aa1f2b6192d2)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
some qt prfs use this variable, so better set it it to avoid some noise.
Change-Id: I606c88dd7664b1cd8b490d60badd5c6bf80fd1c9
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/e64cc71194cbe283dfe9bd2cd688f01fcdcadf34)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of multiple VS installations, a static variable wasn't
initialized. That led to wrong values in subsequent calls of the
detection function.
[ChangeLog][qtbase][qmake] fix detection for multiple VS installations
Task-number: QTBUG-35530
Change-Id: I3fc23bc99679fff640f39578a7074d16fe923334
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Those libraries are contained in QMAKE_LIBS_CORE and
GetSpecialFolderPath() is present in all supported versions.
Change-Id: Iae40714e0f234625b063aeb50e29fc79c4aaa6ea
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this pretty surprising behavior would interfere with building the
examples from an installed qt tree with qmakes from other qt builds.
.qmake.conf (and .qmake.cache) files provide a possibility to explicitly
"anchor" project roots, so there is no point in having a second, even
more magic way to do it.
Task-number: QTBUG-35485
Change-Id: I8fd4fda67cabafdf55e7a98282dcdfaffb4a405e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This adds the required members to allow setting the SDK version, and uses
them when creating WinRT projects.
Task-number: QTBUG-35328
Change-Id: I500ea77c41e27cbcc850462034c0eba8c5d1f124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When creating a MSVC project file for WinRT/WinPhone, the package
manifest and all referenced icons should be automatically added as
content items.
Task-number: QTBUG-35328
Change-Id: Id7f34388c5ba6746392ddadbb795ef47bef34af6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Visual Studio will default to generating metadata, even if it is not
written to the vcproj. Since there is no metadata file, the build will
fail. This change keeps a saner default for this option when generating
WinRT project files.
Task-number: QTBUG-35328
Change-Id: Ie693e270ef0b9d9677d53af0c60905f048235bc5
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some cross-compiling mkspecs may require a different MSVC version than
the one found in the path (or the default version). This change allows
the preferred MSVC version to be selected from the mkspec's MSVC_VER
variable when found.
Task-number: QTBUG-35328
Change-Id: I19e03101e3921dfd5026421aef4630e11b9f131e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Right now, the sublib targets, if any, show up between clean and
distclean targets. That's silly.
I doubt anyone is using sublib targets anyway, but...
Change-Id: I2beffc69f68fa7626ff4aa4a7cc1169b2c6c69a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
- thread was duplicated
- x86 & ppc are obsolete and don't actually do anything
- incremental was just plain nonsense (it does something entirely
different, and it's better to hide this "feature" from public view)
- resources is basically an implementation detail (it's on by default if
qtcore is used)
Change-Id: I9163af6e8db7988382ccf993d4be280f7faec1f2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
while the dependencies in the manual projects are crappy anyway, it is
still worth to cover the case of the user changing the install paths.
Change-Id: I0a7ca5c8ba660c689d6d7af6b65d878390d6456f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Done-with: Leena Miettinen <riitta-leena.miettinen@digia.com>
Change-Id: I1e031402bc3d857cf29782957e5340e3c82f1ed2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The default values for PCH, the -ZW switch, and CharacterSet aren't
ideal for WinRT projects, so adjust these accordingly.
Task-number: QTBUG-35328
Change-Id: I78021d0785fa84e15b1f17264daa599a9418f92e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Link to "Getting started with qmake" was invalid
Task-number: QTBUG-34749
Change-Id: I782dc99f5182f2fe7661377eb82f35ebb50a46cf
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
let the compiler use qmake.pdb, as the linker will.
Change-Id: Ifafdfeff5a7d0ea91d796f76fbdc018c87cf8b78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids the nasty and conflicting vcXX0.pdb files in the build dirs.
VS will already do that.
Change-Id: I7bddaecf3f478edc78cd6654b5a1038db4fe04ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
QString::replace() has no way of escaping capture group references,
so simply disarm double backslashes. of course this is broken, but
we'd need to reimplement it from scratch to fix it properly. "corner
case" ...
Change-Id: I357fbfd22c9c4a68809e5af6efad1de3a95706b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Starting with MSVC2013, a separate set of libs for Windows Store apps is
supplied, so make sure it is in the LIBPATH (and before the desktop libs).
Change-Id: I74f3f385c2db749010fbfe7e2d4c3d1228e4e603
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
there is no point in setting the variables already when peeking into
the caches, as that is done in a separate evaluator anyway.
it also makes no sense to have them set while loading the spec itself,
as it's not permitted to do anything with the caches.
so set them at the next convenient point, which is right before actually
loading the caches.
Change-Id: I3717ddf94353dc04e12c52e542f16ed27b578e14
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
