When QCocoaWindow::setWindowFlags is called, the window()'s flags have
not been updated, so re-computing the collection behavior based on those
would not be correct.
Change-Id: I5512da75104483eac7100880c164a9d08fd82984
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This commit adds support for DRM atomic to qtbase eglfs/KMS QPA when
libdrm and device supports it.
Compared To legacy DRM API, atomic API allows to update multiple planes
in one vsync. This is the first part of some work that should follow
and allow:
- DRM framebuffer upscaling for embedded devices that have weaker GPUs
- Sharing the drm atomic request if the KMSDevice so that applications
in userland can blend content on overlay in the same vsync loop.
One of the application for DRM atomic and Qt is typically videoplayer
integration at high resolutions (UHD) on embedded devices which cannot
use their GPU to render such videos, but are able to render it to a drm
overlay.
Change-Id: I047adf3e3d07a53440d52c2a7073c9ed054adf34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Changed old signal/slot syntax to new version
Task-number: QTBUG-60635
Change-Id: I7cbe8851d321b7632a08c098b69a96cc346d5f83
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This is needed to be compatible with latest Qualcomm BSP releases.
This patch also makes it possible to select HW layer via
QT_OPENWFD_CLIENT_ID and QT_OPENWFD_PIPELINE_ID environment variables.
Change-Id: Ie795b21afc61a1de7c1d0b52cdb30a754e3f8266
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit 00f693d3e5046999270c92731e34a3e7fcd01c6b)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The default value for a default constructed FindFlags QFlag is zero and
FindCaseSensitively is 0x2. Therefore the default behavior for find() is
case insensitive.
Change-Id: Id3419c3562fc6170fdb281098a22dd8205603847
Task-number: QTBUG-62660
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This adds subscription to additional config changes on Android to
avoid the application automatically restarting when the SIM card is
replaced or the logical density of the screen is changed (as a result
of the user changing it in settings).
These restarts are especially problematic when using Qt in a
home screen application due to the way they are launched.
[ChangeLog][Android] Avoid the system restarting application when
user replaces SIM card or changes the logical density of the screen.
Task-number: QTBUG-63735
Change-Id: Iba85fe6239b2d29b543b3c4e2f953efb9b54f713
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
To avoid needless detach()ing:
- don't make copy of tabArray unconditionally.
- use qAsConst to avoid detatch in for loop.
- For CoW types, prefer const methods.
Change-Id: I3273316bdd862fee4c66bad8291898a9ed913c60
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66815
Task-number: QTBUG-66216
Change-Id: I2c3eb42507eae618486aa402474b4b3f85ff310e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This follows on from a232251992 which
covered a similar instance of this. As with that change, we should not
abort the compilation, just ignore it.
Task-number: QTBUG-63772
Change-Id: Ide958080a90f43ed19edd8a320e7d45de1c96821
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QTableView draws its gridlines at width/height of the cells. This
means that there is no gridline at x=0 and/or y=0. This is fine when
there is a header. But when the header is invisible, an additional
line at 0 must be drawn to have a boundary to the neighbor widget.
When a span is drawn, the clip rect has to be adjusted in this case
because x/y=0 belongs to the cell (and therefore would be clipped
out).
Also fix the drawing of the grid lines in RTL mode and with
ScrollPerPixel.
Task-number: QTBUG-22972
Change-Id: I1829770e3d5bf65421b590f7bb7354cbf222e3fb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When _q_sectionsChanged() is called from e.g. QSortFilterProxyModel
the LayoutChangeHint is set which can be used to avoid useless work
in this function.
Change-Id: I034db3fcc7a5f9ea7ebc0fa3ffd7429edb154eb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since pthread_cond_timedwait takes absolute time instead of relative
time like most POSIX API, there's a small gain in performance here: we
avoid an extra system call to get the current time.
Task-number: QTBUG-64266
Change-Id: I25d85d86649448d5b2b3fffd1451138568091f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The indentation of large code blocks in setModel() and clear() are not
correct. Needed for another change to avoid whitespace changeds in there.
Change-Id: I620c8c5e83e98747f5c17469738722cf976fb467
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Looks like this should be "super." instead of "super_"
Found by spotbugs.
Change-Id: I83d096eee332361d62e783581bfa15017536081d
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Silence debug output by setting QT_LOGGING_RULES
to turn off all debug output.
Task-number: QTQAINFRA-1631
Change-Id: I5c2366b4fe4bac341dcfd92f68b6da8071c5b089
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
When reading an HTML file with <H1> for example, we still set the font
size as before (that's how it always was done),
but now it remembers that it came from an H1 tag, so it writes
<h1 ...><span font-size:xx-large ...> ... rather than
<p ...><span ...> ... This will help with the upcoming Markdown
format, where heading level is saved but the font is not.
Now the style combobox in examples/widgets/richtext/textedit can set
list item type, heading type or "standard" formatting, and also shows the
current formatting of the line that has the cursor. It was always a
shortcoming in this example that it only allowed setting the current line's
block format but had no feedback to show the current format.
Change-Id: I0a7849b74f23fea84d3375c487c3a6b9f43240c1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Evaluating testlib's XML output in COIN would fail with:
"XML syntax error on line 7520: invalid UTF-8"
for the toLatin1() tests due to some Latin1/UTF8 mixup.
Add a helper function to convert the data to plain ASCII.
Task-number: QTQAINFRA-1797
Change-Id: I1c64878d4c2a67b8c2689905b5ffe6707b5963c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has been crashing flakily recently.
1) It is creating a QGLWidget
2) It is stealing the QGLContext of that widget and moves it into a separate
thread.
3) In that secondary thread it makes the context current.
4) Meanwhile the QGLWidget itself may receive for example a resizeEvent or
other events and - since it assumes that it owns the context - attempts to
make it current.
5) Attempting to call makeCurrent() on a QGLContext that is in a different
thread than the current thread (via QObject thread affinity) will result
in a call to qFatal() and consequently the test aborts.
The conclusion from Simon Hausmann is that this test is testing a pattern from
Qt4 times that may or may not have worked back then. Nowadays with the Qt5
QOpenGL* API we do support this properly and there appears little sense testing
this.
Therefore remove the test altogether.
Task-number: QTBUG-66411
Task-number: QTBUG-66216
Change-Id: Ie2d66705bc7c3914ace6abcba9557c7c67ad4db3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This test executable was not flaky in the normal sense that when run, it
sometimes passes and sometimes fails. Instead, in some builds it would fail
consistently and in some builds it would pass consistently.
The first test to fail was version(ok00, default to last version) which gives
"mylib" as the library name and -1 as the library version. The description
implies that QLibrary selects the biggest or last used version when given -1.
However, versions less than 0 are not used at all. Instead the loading uses only
the name to select the library. Change the description to match.
So why did the test sometimes pass, sometimes fail? The test uses two library
projects lib and lib2 which install two different major versions of libmylib.
That includes the symbolic links:
libmylib.so -> libmylib.so.1.0.0*
libmylib.so.1 -> libmylib.so.1.0.0*
libmylib.so.1.0 -> libmylib.so.1.0.0*
libmylib.so.1.0.0*
libmylib.so -> libmylib.so.2.0.0*
libmylib.so.2 -> libmylib.so.2.0.0*
libmylib.so.2.0 -> libmylib.so.2.0.0*
libmylib.so.2.0.0*
The key thing being that both set the libmylib.so symbolic link. In a
multithreaded installation it's undefined which happens to set the link last.
The test code expected libmylib.so to point to libmylib.so.2.0.0. Ensure that by
building and installing lib2 after lib.
Task-number: QTBUG-66722
Task-number: QTBUG-66216
Change-Id: Ic513c772902273049c28e43fc1d83d550aafcd23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QJsonValue] fromVariant() conversion now converts
from QUrl and QUuid using special encoding forms to ensure best JSON
compatibility.
Change-Id: I56b444f9d6274221a3b7fffd150cdc5ca1f87ff1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For compatibility with other parsers that may expect it to be so.
Change-Id: I56b444f9d6274221a3b7fffd150cd66390f98fd5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Seems this issue is still there with Adreno 5xx and 6xx is suspected to
have it as well (no device to test though), so added both 5xx and 6xx
to cover these. Updated 30x to 3xx in order to cover Adreno 320 and 330
as per https://en.wikipedia.org/wiki/Adreno.
Amends 9ae028f507
Task-number: QTBUG-66702
Change-Id: I6ce3f6499d3ff9da884be45039e5f5e0990f7e1f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QXcbScreen::format() was producing console warning and returning invalid
format if rgb-swap was necessary. Let it match possibly reversed formats
since the backing-store will swizzle it anyway.
Change-Id: I6a53cb8ceda029e9d708d25ad635832f1163ffe7
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Factor out a function to calculate the size and update the size when a
style sheet parent is set.
Task-number: QTBUG-64550
Change-Id: I3afe997085eae3cd48b7fe0a4c98582a8f572260
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Return value of qWaitForWindowActive should be checked as it is marked
Q_REQUIRED_RESULT.
One of the calls was failing, so remove it and wait for the next condition
instead.
Amends d0dffdfc01.
Change-Id: I0c0b2bf11504730477158a5e1fb3018f359a6fb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The stdout of the processes used in the test was dumped if there was an error,
but the processes write their error messages to stderr.
Use MergedChannels process channel mode to dump both output streams.
Change-Id: I1645fd31c394da0871ee6ae36d37ca9a04d86052
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This avoids issues when using dependencies installed in a custom or
dedicated $prefix, when PCRE2 is configured to install its headers
in their own directory under instead of directly in $prefix/include.
Task-number: QTBUG-66355
Change-Id: Ia99464820600282d61237e5bcff38101d2c9684b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes cross compilation with mingw from a case
sensitive filesystem.
Change-Id: I0f5ba708b7138cae325ff564559d3e40eba4e714
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The refactoring to support multiple providers broke alias resolving
(e.g. "text/directory" would be an invalid mimetype, instead of being
resolved to "text/vcard"). The unittest didn't catch it because most of
it was running with a single mime directory (and therefore a single provider,
in the new model). Fixed by re-running a number of test methods once we
have a second mime directory.
Change-Id: Ib5da89ba79c11ed41813b2aff4bc71c30afcde7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No behavior was changed, just cleanup so the upcoming feature
can land safely, with an elegant diff.
- Removed all naked qobject_casts<QStyleSheetStyle*>(), replaced
them with qt_styleSheet() (which does the same, for now).
- Removed a bunch of #ifdefed'out "metal hack" code. The code is disabled
and enough time has passed without nobody needing it.
- Removed a few "extra ? extra->style" by assigning it to a variable first.
- Misc
Change-Id: Ia45c38b06e2b5d2426635f730b4cb42c7ac1251d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
