Previously we hardcoded the minimum windows version to the initial
Windows 10 release. However features have been added which require a
higher SDK version (eg drag and drop). Deploying such a package might
fail during distribution to consumer devices.
Hence introduce WINRT_MANIFEST.minVersion and
WINRT_MANIFEST.maxVersionTested as variables for the manifest file. If
nothing is specified, both values will be set to the UCRTVersion
environment variable, implying the development setup from which qmake
has been invoked.
Change-Id: I1dcf1e75c67c4ab2fd5a3fdcc32c8783a336e6ff
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So far no capabilities (but internetClient for Windows 10) were added by
default, which forced developers to always manually edit the
WINRT_MANIFEST.capabilities(_device) property.
This allowed to leave out non-required capabilities and keep the created
manifest clean, examples being microphone for multimedia.
However, this also breaks first user experience as deeper knowledge
about this topic is required. Furthermore this is inconsistent with
other platforms like Android, where all capabilities are set by default
and developers need to edit the manifest manually in any case.
With this change, modules can define the capability set to enable all
features in the module. If developers want to disable some again, they
need to adapt the generated manifest. From our experience this needs to
be done in any case, latest at publishing stage when the store
manipulates the manifest.
Task-number: QTBUG-38802
Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This header defines "interface" which will break compilation of dbus.
Change-Id: I16fa35f822adca14304aa827b047358409d4a150
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
10240 describes the first official non-preview Windows 10 SDK. 10586 was
the SDK for the first November update.
Change-Id: Ieb61b944295946eab594b3c7bf234155a67b752e
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This allows users to add mobile specific features. Also it implicitly
enables support for continuum on Windows 10 Mobile.
Change-Id: I965123722f46df6e84fd279c3bfce478c1172632
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This is needed to be able to use Qt (with dynamic ANGLE) in a plugin
while the host runs a different version of Qt (and ANGLE).
In addition to changing the LIBEGL_NAME and LIBGLESV2_NAME variables
you also need to update the value of the LIBRARY definition in the
.def files for ANGLE:
qtbase/src/3rdparty/angle/src/libGLESv2/libGLESv2[d?].def
qtbase/src/3rdparty/angle/src/libGLESv2/libEGL[d?].def
Task-number: QTBUG-48431
Change-Id: Idd00d039ba3e20cc0ec7496bee36ed1c90383b0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Visual Studio version specific changes have been added to msvc-
desktop.conf which is not used in WinRT or Windows Phone related builds.
Hence take a similar approach to gcc and introduce msvc-base to be used
by all configurations for common settings.
For WinRT this will only be applied to msvc2015 and later on to not
introduce any regressions or behavior changes for previous versions.
Change-Id: Ib1a4d539d46d788470c00cb5969fee74a803bd67
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
While all apps need to have internetClient as a capability, the option
to provide further capabilities via qmake has been removed in the
template.
Instead we add the required items inside the prf and keep the manifest
template as generic as possible.
Task-number: QTBUG-49504
Change-Id: If26b9da277a5269a57b34e74c146b40b1b64d091
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If that section is there but empty, the manifest cannot be loaded using
the App Manifest Designer in Visual Studio.
Task-number: QTBUG-48648
Change-Id: I529eb2f2a690bececcf5c385b8f96e84ece363d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that way we can override the values defined there.
Change-Id: Ib9bce596d9fd43875b26a97c5489ee9d0d46b77c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it was experimentally added in 2011. there is no evidence that anyone
actually uses it.
Change-Id: Ie3b131f3783cafe942d180b2623fcc64740d7a73
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it must come first, as it is most specific.
an alternative fix would be re-organizing the includes, but that
requires a lot more effort to get right.
Change-Id: I1526a3c966f3dc3f3df1efc00ec271d333ed7ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
If no_generated_target_info is not set, VERSION is set, and
there is no .rc file that belongs to the project, qmake creates a
.rc file that contains information about the target's version
and copyright, for example. This resource handling is also
supported by WinRT and we can add this information to the target.
On Windows Phone, winresrc.h (which is needed for resource
handling) is not available though. When trying to add a .rc file
to a project in Visual Studio, it also complains about winres.h
not being available. Instead of hacking around the issue, we
just should not support this behavior on Windows Phone.
Change-Id: Ie962bfa790916fed23294110062e3572a0e317f9
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This linker script is only enabled for systems with GCC or GCC-like
compilers, though technically it should work on the BSDs too (will
enable after testing). For regular modules, this declares one ELF
version "Qt_5" and places all QtCore symbols inside, then it declares
unused ELF versions "Qt_5.x" for each older minor release. For modules
declared "internal_module", all symbols are placed in version
Qt_5_PRIVATE_API.
The big advantage of an ELF version is that, when we do Qt 6, both
versions of QtCore could be loaded in memory without conflicts and all
symbols would be resolved to the correct library. No module can talk to
both at the same time, but this avoids mistakes of loading them
indirectly by plugins.
The extra Qt_5.x versions will be used in the next commit.
Change-Id: I049a653beeb5454c9539ffff13e3fe6f050fdf31
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Change-Id: Iee8cbc07c4434ce9b560ffff13ca466263abcb1b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The architecture needs to be specified to be properly used inside Visual
Studio and for winrtrunner to parse dependencies.
Change-Id: I218100f33efcba9f78199cbd1e48089269648e61
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
So far the dependency keyword has been ignored for the new Windows 10
mkspecs. The difference to older manifest files is that there is already
a <Dependency> section and hence we embed dependencies inside this one,
as the format standard does not allow to have multiple of those.
Change-Id: I1bf25979cc28d5c153215de5bb9cd6f37e9c50aa
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Since libstdc++ builds on OS X and QNX 6.5 are no longer supported,
simply require <initializer_list> and std::move in order to claim C++11
support works.
The minimum OS X versions need to be fixed elsewhere.
Change-Id: Ib056b47dde3341ef9a52ffff13ef1d2ac3923f5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fix the flood of warnings:
src/corelib/global/qflags.h(52): warning C4577: 'noexcept' used with no exception handling mode specified; termination on exception is not guaranteed. Specify /EHsc
now occurring since we don't have exception handling enabled.
Change-Id: I05d12ee6303b4f9fceb48507fadfd7d1a5604ea4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
These macros are not defined unless a desktop or standalone SDK is
installed.
Change-Id: I4c600ddca5944cc5fde310e4fbe0866a7250d36b
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Most people's yacc are actually a symlink to bison. On Windows, where
symlinks don't usually exist, we can use bison -y.
This was tested with MSYS Bison.
Change-Id: I913745d48af30f9ef7b846b6438500261dd6022d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Prefer -std=gnu++11 unless strict_c++11 is defined. You can enable
strict C++11/C++14 mode by using
CONFIG += strict_c++
That is enabled for Qt's own code, so we we don't accidentally use GNU
extensions in portable code.
There's no support for strict C++98 mode (that is, the -ansi option).
[ChangeLog][qmake] By default, GNU extensions are now enabled with
Clang, GCC and ICC even in C++11 and C++14 modes. To disable the GNU
extensions, add to your .pro file: CONFIG += strict_c++.
Change-Id: Ib056b47dde3341ef9a52ffff13ef14de2169bef5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Clang does not recognize the compiler flag 'no-arc-abi' anymore.
This causes a warning, which will fail the build. Not sure
what the flag does, as I cannot find any documentation for it, even
after grep-ing through the sources (both clang-600.0.57 and
clang-503.0.38)
Change-Id: I39fae3fd108a8edb978f4264935a069cce4c302a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This allows creation of applications for
- x86
- x64
- arm
While the arm build theoretically also allows to launch on
a mobile, it currently asserts on runtime. Either we will
create a new mkspec for Windows 10 Mobile in the future,
or do runtime checks for the environment. That also depends
on whether there will be a separate SDK by Microsoft.
Change-Id: I510bfc88410a5b5a1eb7c37f7f43888d1e5dda0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
On desktop windows we define _HAS_EXCEPTIONS=0 to also forward this
option. Hence harmonize this with WinRT builds as well.
As a side-effect qtdeclarative now compiles without warnings on WinRT.
Change-Id: I8e343f172160991ffb2ede01303802f321de82b5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
GCC 5 combined with a recent binutils have a new optimization that
allows them to generate copy relocations even in -fPIE code. Clang has
the same functionality when compiling an executable with -flto. We need
to let the compilers know that they cannot use copy relocations, so they
need to use really position-independent code.
Position independent code throughout is not really required. We just
need the compilers to use position-independent access to symbols coming
from the Qt libraries, but there's currently no other way of doing that.
Task-number: QTBUG-45755
Change-Id: I0d4913955e3745b69672ffff13db5df7377398c5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this allows LD_LIBRARY_PATH to take precedence over the hard-coded
rpath, which is the only sane thing to do (which is also why i'm not
adding an option to disable it).
this behavior is consistent with non-linux systems.
the windows version has no auto-detection, just like for gold linker
usage.
Task-number: QTBUG-3069
Change-Id: Ief9ba032291c898d75d76ecc740390954382a804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The flags are the same across all GCC flavors so put the definition
in the common gcc-base.conf instead of duplicating it in g++-base.conf
and clang.conf
Change-Id: I1ba2c3c314d3a02b559c384aecef74240f69f659
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
