The check_language macro spawns a new cmake subprocess to detect
availability of a language. We use that to detect availability of
the Objective-C/C++ languages when targeting Apple platforms.
That's problematic because the parent process CFLAGS / LDFLAGS env
vars influences the result of the subprocess compiler detection,
and in some cases that can fail the detection.
An example of that is passing iOS specific flags which then get
mixed with the default macOS flags added by CMake, resulting in
a linker failure.
Instead of using check_language, explicitly enable the Objective-C
and C++ languages when targeting Apple platforms because we know
that we need them for compiling Qt.
This avoids the issue because enable_language is not spawning a
separate cmake sub-process and thus passes more information to the
underlying try_compile project to ensure a successful check.
The change also means that CMake will error out earlier in case if the
Objective-C compiler is not found, which was not the case before.
Pick-to: 6.5 6.6
Fixes: QTBUG-114470
Change-Id: I1a16c1e5828dfe10b2d7da27cc9a8c787517ab8e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
I added the ability to use `-no-unity-build`, and included the
batch size in the config.summary as well. In addition, qt_feature is not
being used for `-unity-build` anymore.
Pick-to: 6.5 6.6
Change-Id: I4a10e03d3505336d2256280ed2854ec0425df47f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Explicitly check that at least CMake 3.21 is used when building Qt or
when using Qt in a project.
This only affects macOS and iOS builds.
We check for 3.21 instead of 3.21.1 as described in the documentation
to avoid an error like:
Policy VERSION range "3.21.1...3.21" specifies a larger minimum than
maximum.
Until the technical limitation is addressed, if someone does end up
using 3.21.1, another existing check for "unsuitable" cmake versions
(as opposed to minimum required) will let them know they should use
something newer.
Amends 1cf3295cef321c9a587af2f2de7740c0cd3ca743.
Pick-to: 6.6
Fixes: QTBUG-114869
Change-Id: I2a479baaa63cfbe23af187cf0796e1c00042692b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Newer msvc gives C4309 warning for 'initializing':
truncation of constant value
Warning would go away if we had 'enum foo: unsigned'.
Disable the warning for problematic enums is not enough
as it also complains about headers coming from windows sdk
like:
C:\Program Files (x86)\Windows
Kits\10\include\10.0.22621.0\shared\wtypesbase.h(395): warning C4309:
'initializing': truncation of constant value
Note 10.0.22621.0 is the latest sdk already.
Do not disable language extensions for header clean target.
This reverts commit 8bf602518d
Task-number: COIN-1059
Fixes: QTBUG-114931
Pick-to: 6.6
Change-Id: Ifc3883f88a6bd52794a37dc640eca99c158a40e0
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
The syncqt tool was originally designed to run at build time, as a
part of dependency chain of Qt modules. This works well unless we need
the code model of the Qt project in IDE, since Qt source code actively
uses header aliases, and creating them at build time breaks the code
model until the initial build is done. So we made syncqt the configure
time tool to not break the developer experience.
It's more likely that developers build Qt using command line or don't
need the code model before the first build. So running the tool at
configure time should be optional.
QT_SYNC_HEADERS_AT_CONFIGURE_TIME switches the "mode" of the syncqt
tool from build time tool to the configure time tool. Without the
option enabled build procedure runs all the syncing targets at build
time only. The exception are the developer builds, if the
'-developer-build' option is enabled, QT_SYNC_HEADERS_AT_CONFIGURE_TIME
is set to TRUE by default. This gives better development experience for
the developers that don't use the code model in their IDE or don't
require it before the first build is finished. Also this build time
mode is preferred for the CI or similar build procedures where code
model is not required at all.
By default, the option initialized from the
QT_INTERNAL_CONFIGURE_FROM_IDE CMake variable.
TODO: The option is forced to TRUE for the static Ninja Multi-Config
builds. See QTBUG-113974 for details.
[ChangeLog][Build System] When building Qt from sources, syncqt and Qt
header files are now created at build time, not configure time. This
should speed up the configuration step. You can set the CMake variable
QT_CONFIGURE_TIME_SYNC_HEADERS to ON to use the previous behavior,
though. The old behavior is also preserved if cmake/configure is run
from inside an IDE - Qt Creator, Visual Studio Code, and CLion are
currently detected.
Task-number: QTBUG-111163
Task-number: QTBUG-109792
Pick-to: 6.6
Change-Id: Ib61bda9546e58492be874a8591c37e100313d02c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Vcpkg detection is enabled by default, but we did not have a flag to
disable it, and it was not showing up in config.summary either. By
adding a -vcpkg flag, we get to use `-no-vcpkg` when necessary, as well
as adding an entry to config summary indicating whether vcpkg is in use
or not. Besides `-no-vcpkg`, one can pass `-DQT_USE_VCPKG=OFF` to cmake
command in order to disable the automatic vcpkg detection/integration.
[ChangeLog][configure] vcpkg detection, and integration can be disabled
by passing the -no-vcpkg flag to the configure command, or by passing
`-DQT_USE_VCPKG=OFF` to the cmake command.
Pick-to: 6.6
Change-Id: Ide8da70a7b473ec23995104d162356e75e6d1240
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It should be possible to build a test in any configuration
by building Qt in that configuration, and then building
the test with qt-standalone-test.
Not all Qt configurations will be able to run all tests,
(due to exec() calls and similar) but that's OK - some
tests don't have exec() calls, and we want to be able
to run tests for a given configuration to figure out
how well it works.
On CI we want to use batching and asyncify, so it makes
sense to tie usage of asyncify to batching.
Pick-to: 6.6
Change-Id: I05553d250a45c1831f43dc71a43ef02d01d70535
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
The new argument would allow bundling the prebuilt OpenSSL libs
into the test apk so that SSL can actually run. It expects the CMake
argument OPENSSL_ROOT_DIR to be set ( we set that in Coin configs).
Task-number: QTBUG-110025
Pick-to: 6.6 6.5
Change-Id: I4c82796635ca89f5511255ae26182f41a504b026
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The export name is now ${TARGET_NAME}Entry. This can also be overridden
by using QT_WASM_EXPORT_NAME, both in CMake and qmake
Change-Id: I59c97ae6e22f0b2720716e9d7eff7b6b13d37ab5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Set `QT_COMMAND_LINE_PARSER_NO_GUI_MESSAGE_BOXES` before trying to run
qt tools for correctness. This is to suppress QCommandLinerParser from
showing a message box when console is not available.
Pick-to: 6.5.2 6.5 6.6
Task-number: QTBUG-114530
Change-Id: Ib3d264a799a5da1f620d2bebe55539bafc43da0f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Spack, like VcPkg, sets the `CMAKE_FIND_FRAMEWORK` to `LAST`, as a
result, similar to VcPkg, when Spack is used, FindGSSAPI opts for
`gssapi_krb5` which is not what we want. By dropping the `gssapi_krb5`
from the list of alternative names we can resolve this without much
tinkering with internals of these package managers.
Pick-to: 6.5 6.6
Fixes: QTBUG-114537
Change-Id: If517c409511f58e3bed78316a2030393dc249a40
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
TestCocoon is not maintained anymore, and the -testcocoon configure
option of Qt didn't do anything useful since Qt 6.0.0.
Remove the option. It's possible to create an instrumented build by
using dedicated CMake toolchain files as described in the documentation
of Squish Coco (TestCocoon's replacement).
Fixes: QTBUG-88316
Change-Id: I8a565cdd288aca9208f48138d2b663802cc0de90
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
CMP0099 changes the way of LINK_ONLY genex works. With CMP0099 set to
OLD LINK_ONLY genex only links the exact library binary/archive without
propagating other interface options from the target. This feature was
exploited by PlatformXInternal targets to avoid propagating of their
linker options. Nowadays when CMP0099 is forced to NEW by Qt scripts,
including user-facing, we cannot rely on LINK_ONLY genex.
Introduce _qt_is_internal_target property that is set for all Qt
executables and explicitly limits the propagation of the linker
options from PlatformXInternal targets.
Pick-to: 6.5 6.6
Fixes: QTBUG-113641
Change-Id: I3a0ecddb65886e435073feb24c1b47035130ba70
Reviewed-by: Alexandru Croitor (OOO) <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some of our tools don't have the `-h`, or `-v` flag, or it could be
that the `-v` flag also prints the entire `--help` as well, e.g.,
`androiddeployqt`. When running in Jenkins, this may lead to a message
box being shown and consequently stopping the build. By customizing the
flag per tool, and limiting the TRY_RUN to tools that support `-v` or
`--version`, we can avoid this.
Also removed TRY_RUN from `macdeployqt` which doesn't need it anyway.
Amend 41b32cd2c4
Pick-to: 6.5.2 6.5 6.6
Fixes: QTBUG-114530
Change-Id: I78e3344d2553c0050c285ae86f2310bd373c6c57
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Fix the argument prefix that is used in the cmake_parse_arguments call.
Pick-to: 6.5 6.6
Change-Id: Ie02bdf7d2769ce084b0d173c1e8152ca6fc4fe53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If flags use CMake scopes that propagate them to user libraries, it may
lead to an issue, if user projects are built using different compiler.
We need to guard these flags to make sure that they only will apply to
respective compilers.
Pick-to: 6.5 6.6
Change-Id: I0fd5847447bd8373e8e07f64dae11f27f48c915d
Reviewed-by: Alexandru Croitor (OOO) <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
There is a chance that an unused variable warning will be treated as an
error, and in that case, this check will fail, and as a result FindEGL
will fail.
Pick-to: 6.2 6.5 6.6
Fixes: QTBUG-114431
Change-Id: Iaac49589144dbe4172ec58c6705a9f899c25f01f
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
We should sync external headers for 3rdpary projects
like freetype and harfbuzz-ng and keep the directory
structure.
Fixes: QTBUG-113416
Pick-to: 6.6 6.5
Change-Id: Ie66edb9a21cff37ca6c8c68b6d225de6d8bbad81
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
`TYPE` argument is not a thing, and if it is there, QT_BUILDING_QT is
set to `TRUE;CACHE;TYPE;STRING;When this is present and set to true, it
signals that we are building Qt from source.` instead of `TRUE`.
Pick-to: 6.2 6.5 6.6
Change-Id: I24784e9aead4929d408d06bce72d3f33ee21eb63
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I think this needs to be more prominent, as I noticed during the testing
that it could cause issues if it gets lost in between the config
messages, as we knew of course.
Pick-to: 6.5 6.6
Task-number: QTBUG-113463
Change-Id: I2ece498a8d3604362a49cc10499b92b0d2764fb9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Android's toolchain file, ie., android-legacy.toolchain.cmake assumes
that the default build is a Debug build, and it adds the `-g` flag to
CMAKE_<LANG>_FLAGS, as a result, our release Android build always
contains debug symbols. In this patch, I basically move the `-g` flag
from CMAKE_<LANG>_FLAGS to CMAKE_<LANG>_FLAGS_DEBUG, and
CMAKE_<LANG>_FLAGS_RELWITHDEBINFO.
Pick-to: 6.5 6.6
Fixes: QTBUG-111901
Change-Id: I31eadb07d9172c923e8beaf0ac6c6e34fe1ebefb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before this change, we had the following behaviors.
On platforms other than Windows-MSVC:
- when no build type was specified, we defaulted to Release
- when -developer-build was specified, we defaulted to Debug
- regardless of platform, unless the option was explicitly specified,
we never defaulted to -debug-and-release.
On Windows-MSVC, we always defaulted to Debug. Which is inconsistent
with the rules above.
The difference happens because CMake always sets CMAKE_BUILD_TYPE to
Debug during the first project() call when targeting the Windows-MSVC
platform.
We interpreted that as the user setting the build type, and thus we
didn't want to override what the user specified.
After this change, if we detect that it's cmake setting the build
type, we assign a build type that follows the non-Windows-MSVC rules.
This change unifies the behavior across all platforms.
Adjusted the configure help with the new reality.
Augments 33af62db37
[ChangeLog][configure] When no explicit build type is specified,
Windows will now default to building Release like the other
platforms.
Pick-to: 6.5 6.6
Change-Id: Id2bf269c51cf300ec09751ece2ad721869e0f90c
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 389507a047.
Reason for revert: The original patch unintentionally changes
the deprecation warning behavior for user projects. Merging
the current change will resurface the original static qt build
bug until a new fix is developed.
Pick-to: 6.6
Change-Id: I29b41b43fdd76b19bc46439470e04443dc2b8ddb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Yuhang Zhao <yuhangzhao@deepin.org>
Found at https://github.com/openbsd/ports/blob/master/x11/qt6/qtbase/patches/patch-cmake_QtRpathHelpers_cmake
There are a lot more patches there whose purpose I can't tell. This is
the only CMake one that I do understand. They should upstream those
changes to us with an explanation, instead of carrying patches...
Found while researching if 9caac0f176 was
still necessary for OpenBSD.
Pick-to: 6.5 6.6
Change-Id: I63b988479db546dabffcfffd17661fdd376bf8c8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Accounting for the case where `MODULE_ROOT` is set to `.` which then
makes the `get_filename_component` command to return an empty string;
consequently, we cannot find the `config_file.txt`, and cannot process
the features correctly.
Amend f4bf7982a6
Pick-to: 6.5 6.6
Fixes: QTBUG-114085
Change-Id: I55c7529be6caba4691adec80efca8021bd03c500
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cases like `C:\` or `C:\D\E F G\`, we had the issue were Windows'
path separator was acting as an escape and was corrupting configure
arguments', so, we were ending up with `-DCMAKE_INSTALL_PREFIX=C`, or
were cutting the argument list short, and ended up ignoring some of the
arguments.
Pick-to: 6.5 6.6
Change-Id: I433af61d5c143cc37a64dcf8ac82a1a78ce543a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If I'm not mistaken we would like to leave this to Xcode, if so, we can
use `$()` to make our intention more clear in the code.
Pick-to: 6.5 6.6
Change-Id: I3867f68f371a1cf1a5db5e639ec740f2546ccd75
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove the local __PPS target and make PPS::PPS itself the
imported target. This is not only simpler, but also hopefully resolves
an issue with static builds, where PPS::PPS was not properly promoted
to a global target, leading to linker errors.
Fixes: QTBUG-108794
Pick-to: 6.5 6.6
Change-Id: Ia9334a27312ba9bfeec964f6bd6a82652e5f9d37
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When using Ninja generator on macOS, we now do a bit of extra work to
make sure that bundle identifier is always set.
- In the case where no identifier was provided, the warning message has
been updated indicating that the user can set either of the
properties.
- If both `MACOSX_BUNDLE_GUI_IDENTIFIER` and
`XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER` were set but have
different values, a warning will be shown to encourage the user to set
only one of them.
- In addition `_qt_internal_get_ios_bundle_identifier_prefix` is renamed
to `_qt_internal_get_apple_bundle_identifier_prefix` to be more
platform specific.
Note:
In general, if Ninja is the generator, we set the value of
`MACOSX_BUNDLE_GUI_IDENTIFIER` and don't touch the
`XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER`. If Xcode is the
generator, we set the value of
`XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER`, and in addition, to
silence a Xcode warning, we set the `MACOSX_BUNDLE_GUI_IDENTIFIER`
to `${PRODUCT_BUNDLE_IDENTIFIER}`, ie., let Xcode figures it out if
needed.
[ChangeLog][CMake][macOS] When using Ninja generator, if neither
`XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER` nor
`MACOSX_BUNDLE_GUI_IDENTIFIER` is provided for a target, a bundle
identifier, i.e., `com.yourcompany.<teamid>.<target>` will be generated
and set as CFBundleIdentifier.
Pick-to: 6.5
Fixes: QTBUG-110889
Change-Id: Ie071085bbaf465afcb022b760423eb6b3c921f6d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use the internal target property to store the module_sync_header target
name. The property then is used to collect module_sync_header targets
and build the dependency tree between them. This mechanism only works
for Qt dependencies that are added using qt_internal_extend_target call
that works well at least for out CI builds. The mechanism allows to
omit the race in sync_header runs that might lead to unexpected results
since internal targets like automoc or headersclean_check only depend
directly on module_sync_header target that belong to the module.
Change-Id: I564f3ea0f3c1703e70c4c300fd1307c3214d39d8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce QT_ALLOW_DOWNLOAD option that should be used the downloading
of the resources from web in Qt builds. Calls like file(DOWNLOAD or
FetchContent_* should be wrapped with this option, so users that build
Qt could control this and disable functionality that requires
resources from web.
Change-Id: Ie0494265c0c5fe93a7ef0d1cbcee1af919d57fa5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For untranslated applications we set CFBundleAllowMixedLocalizations to
true, so that the application's locale will not be limited to the
development region "en".
But once we have a set of known translations, added by qt_add_translations,
we can turn these into CFBundleLocalizations, which lets macOS/iOS
choose a best match between what the app supports and what the user
preferences are.
[ChangeLog][Internationalization] Translations added via
qt_add_translations are now reflected as CFBundleLocalizations
entries in the application's Info.plist file on Apple platforms.
to disable this behavior, set QT_NO_SET_PLIST_LOCALIZATIONS.
Change-Id: I3f7ae1a1884eaf269038fa8ee49dbe6cac855706
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allows us to modify this file in place, before CMake copies it into
the application bundle during its generator step.
Change-Id: I73325c66b5b8919f57dbaa1cc76a7edbc145609c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We were not accounting for `x86_64h` arch, and as a result
cross-compiling with `-DCMAKE_OSX_ARCHITECTURES="x86_64h;arm64`
was failing.
Pick-to: 6.5
Fixes: QTBUG-113694
Change-Id: Ieb50a7a62aabcca76b09f9c853b3faf915eab1a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously, we were not setting the CMAKE_<LANG>_FLAGS, instead we were
only processing the CMAKE_<LANG>_FLAGS_<CONFIG>. This patch amends that
so we also update the default flags list as well.
Pick-to: 6.5
Change-Id: I7ceb87850a806fe8ad4eac6f8147b312eba01bc6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unifies the approach between iOS and macOS. By copying the Info.plist
to the build directory, we also open up the possibility to modify it,
which we can't do when CMake does the copy during its generator step.
Change-Id: I59f9f69ac368166bb26d8a5c57bf4ea3f503d51b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To make sure that Qt essential tools can be executed after a successful
build, we can now pass the TRY_RUN argument to `qt_internal_add_tool`.
On Windows, this option creates a custom command and a custom target
(${target}_try_run) for the tool, and tries to run the tool from a batch
script. If the program fails to run because of missing libraries, an
error will be shown, and build halts; otherwise,
`${target_name}_try_run_passed` file will be generated and the build
continues.
Pick-to: 6.5
Task-number: QTBUG-113273
Task-number: QTBUG-112747
Change-Id: I760588714bcf9db69505abe3df717733352a8284
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cases where we allow symlink, we need to use ABSOLUTE path, and don't
resolve the symlink. This function returns ABSOLUTE only if we are on
Apple platform, and have QT_ALLOW_SYMLINK_IN_PATHS enabled. While this
is mainly to resolve the issue report by Homebrew, it might be useful if
a user really want to build with symlink.
Pick-to: 6.5
Task-number: QTBUG-113463
Change-Id: Ided141ed8de66cc1d3717ec2719eb703fa7fc589
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
By not explicitly disabling min/max macros of `windows.h`, we may see
some unintended substitutions. This is especially important now that we
are moving toward enabling Unity Build, and some of the constructs for
manually dealing with this issue, eg., `#ifdef max`, `#undef max`, might
not make it to the pool, and as a result we get build failure.
Pick-to: 6.5
Change-Id: Ie3c31aebe00300126a2ac3a6044876ab92d5d99c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If module doesn't contain headers we should skip adding install
rule of the geneated by syncqt module headers, since the staging
directory will not be created in this case.
Change-Id: I89db5f1447d60cae48cd6ae4b9ef080dcf50e34c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake not necessarly sets MSVC or MINGW when detecting Clang compiler.
We should rely on CMAKE_CXX_COMPILER_FRONTEND_VARIANT instead when
detecting Clang platform.
Fixes: QTBUG-113630
Pick-to: 6.5 6.2
Change-Id: I8c14939ddc0839ddf2b3419392aa843deeef4bb5
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Currently some libraries created by Qt are lacking some compile
definitions and compile options, and this issue is causing us
troubles when building Qt statically. This patch tries to reduce
the parameter difference when compiling Qt's own libraries.
Change-Id: I3842943a874fab32ef90980e8aa29f5beb01feeb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
1. Don't reassign different versions to same symbol
2. Define symbols used
This fixes warnings with LLD linker (or errors if -Wl,--fatal-warnings is added by toolchain e.g. with Android NDK)
3. Add -Wl,--version-script to CMAKE_REQUIRED_LINK_OPTIONS instead of CMAKE_REQUIRED_FLAGS to prevent unused argument warning in compilation phase
(there is no need for _SAVE variable because we are inside a function and our CMAKE_REQUIRED_LINK_OPTIONS won't escase its scope)
4. Fix removal of version script file (incorrect file name was used)
Pick-to: 6.2 6.5
Task-number: QTBUG-111514
Change-Id: I0a1548c4268ad511760a0d4aa69ba7a0bdcbb0bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the new "/Ob3" flag introduced in VS2019 to increase the inline
level, which may give better performance. For compilers older than
VS2019, we still use the traditional "/Ob2" inline level.
Official documentation:
https://learn.microsoft.com/en-us/cpp/build/reference/ob-inline-function-expansion?view=msvc-170
Change-Id: I34a50f27a151cb7c09f0085dd037a385c71848aa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove qglobal.h include from qcompilerdetection.h, qsystemdetection.h
and modulecppexports.h.in
Testing locally, the code builds on Linux with precompiled headers
disabled/enabled (qt_pch.h includes qglobal.h, so building with PCH
enabled isn't useful for testing this) and with/without bootstrap.
qrunnable.*: missing includes detected by compiling with
-DFEATURE_headersclean=ON.
Task-number: QTBUG-106722
Change-Id: I70864dfbf117ffd7fe492eb715a413eb6f209990
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a discrepancy between what the comment was saying, and what
the function was doing before, and with this patch, we opt for what the
comment was saying, which makes more sense. In addition, I cleaned up
its documentation a bit.
Pick-to: 6.5
Change-Id: I07c20f93aa5c8e9bc942f5e69f0cf8299f4a813e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When configuring Qt the second time it might be situation that
the set of qt_find_package calls is changed. One of the scenarios
is the changing of the submodule list that needs to be built in
top-level builds. It's also applicable for Qt features that lead to
extra package lookup in the unlocked subdirectories. Current approach
collects packages that were found at the previous run and skips
search of the packages that are missing. The problem is that
it also skips packages even if qt_find_package was not called at
previous run. QT_INTERNAL_PREVIOUSLY_SEARCHED_PACKAGES collects
all packages that were actually searched at the previous run
to make sure that qt_find_package don't skip packages that
appeared at second run only.
Note: Described scenarios may still have other issues and are not
tested well.
Fixes: QTBUG-113244
Pick-to: 6.5
Change-Id: Iab36060a28fbaa16a3b3bdba67795955c496b0c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
This option is dysfunctional since Qt 6.0. Modify the CMake variables
CMAKE_SYSROOT_LINK and CMAKE_SYSROOT_COMPILE instead.
Change-Id: Ib97dcc765c4644b5c3975d4b61c0e567451ea977
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
There's just no good equivalent with the CMake based build.
Change-Id: I923ef3173d631afe2db0bdacc1d02c1f4649b741
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This configure option is dysfunctional since Qt 6.0. If you really want
to add the /MP compiler option, add it to CMAKE_CXX_FLAGS.
Change-Id: I00b535067944df52abbadb424ec03e53aa41c819
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This configure option is dysfunctional since Qt 6.0.
Use -cmake-generator instead.
Change-Id: Idb147ec8087018dab3ac0e571eeff7d1f18e34f6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This Qt5 configure argument does not exist anymore.
Change-Id: I68c798eb2769c93e3ca0b30d6a3da3247e319eee
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amend 68b625901f and fix link issue with
slightly less modern libc/libresolv where not all functions have been
moved over to libc.
ld: src/network/CMakeFiles/Network.dir/kernel/qdnslookup_unix.cpp.o: in function `QDnsLookupRunnable::query(QDnsLookupReply*)':
qdnslookup_unix.cpp:(.text+0x183): undefined reference to `__res_nquery'
ld: qdnslookup_unix.cpp:(.text+0x437): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0x621): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0x8ff): undefined reference to `__res_nquery'
ld: qdnslookup_unix.cpp:(.text+0xbd7): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0xd7f): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0xf4f): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0x10fa): undefined reference to `__dn_expand'
ld: qdnslookup_unix.cpp:(.text+0x131c): undefined reference to `__dn_expand'
collect2: error: ld returned 1 exit status
Change-Id: If81b292222c78d828b9fef61f30a62f1d584c183
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CMake gives me an error if the double quotation marks are missing.
Pick-to: 6.5
Change-Id: I83a6037dde7503bf2e6fa9316aed732d5ef08576
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
The function needs TRUE/FALSE, not NO_EXCEPTIONS.
Change-Id: I3e173e26fafc02996577466afd09e85351a0380f
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
On macOS, vcpkg toolchain sets the value of CMAKE_FIND_FRAMEWORK and
CMAKE_FIND_APPBUNDLE to LAST which causes an issue when it comes to
GSSAPI. This change in behavior leads to FindGSSAPI.cmake finding
`usr/lib/libgssapi_krb5.tbd → Kerberos.framework` instead, which is not
exactly what we want, and it misses some necessary symbols, and as a
result Network fails to build.¹
We need to make sure that we find `GSS.framework`. Here by dropping the
alternative name on Apple platform, we end up getting the Framework
even if vcpkg prefer finding the framework LAST.
[1]: https://github.com/microsoft/vcpkg/issues/23782
Pick-to: 6.5
Change-Id: I0e7e6272dcb0fdf2c746149d2969468d66ca9ec2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If target platform is not detected the QT_QMAKE_TARGET_MKSPEC
variable remains empty. We need to check this explicitly.
Also store the default QT_QMAKE_TARGET_MKSPEC variable in the target
toolchain file. This is useful if users want to build repos
one-by-one or build standalone tests without the need to specify
the QT_QMAKE_TARGET_MKSPEC each time when configuring new repo or
tests.
Task-number: QTBUG-113630
Pick-to: 6.5 6.2
Change-Id: I57dfc6c97752a645868d77998d8f52e16bdfd5c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the module-spefic sync_headers target when specifying dependencies
for the headersclean custom command.
Pick-to: 6.5
Fixes: QTBUG-113643
Change-Id: I6eb6f4a8881b252f7732ecfa79a9893ace5ce19f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Fixes error where Emscripten fails to find Qt library
dependencies at application link time.
Change-Id: I03b154f60ab5dc3a4c8d0d21d47551c9584029a2
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
qrhi.h, qshader.h, qshaderdescription.h (and qshaderbaker.h from
shadertools; done separately) become "RHI APIs", following the concept
of QPA APIs.
Mirror completely what is done for QPA headers, but using the "rhi"
prefix for the headers. This involves updating syncqt to handle the
new category of headers. (a note on the regex: matching everything
starting with "qrhi" is not acceptable due to incorrectly matching
existing and future headers, hence specifying the four header names
explicitly)
There is going to be one difference to QPA: the documentation for
everything RHI is going to be public and part of the regular docs, not
hidden with \internal.
In addition to the header renaming and adding the comments and
documentation notes and warnings, there is one significant change
here: there is no longer a need to do API-specific includes, such as
qrhid3d11[_p].h, qrhivulkan[_p].h, etc. These are simply merged into a
single header that is then included from qrhi.h. This means that users
within Qt, and any future applications can just do #include
<rhi/qrhi.h> (or rhi/qshader.h if the QRhi stuff is not relevant), no
other headers are needed.
There are no changes to functionality in this patch. Only the
documentation is expanded, quite a lot, to eliminate all qdoc warnings
and make the generated API docs complete. An example, with a quite
extensive doc page is added as well.
Task-number: QTBUG-113331
Change-Id: I91c749826348f14320cb335b1c83e9d1ea2b1d8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
INTERFACE scope propagates the '-utf-8' flag to the target dependencies.
So if Qt is built using MSVC, but the depending targets use different
compiler this flag will break the compilation.
Guard the flag using genex.
Amends e3cc2487ce63cae42d8054b38fdb54abe8545007
Pick-to: 6.5
Task-number: QTBUG-112737
Change-Id: Ie0576667108820dd61035debfc1fcc030ef3536a
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The `-sysroot` does not have any effect, and it can be removed.
I added a warning in case someone is still using it.
[ChangeLog][configure] The -sysroot option was removed. Use
CMAKE_SYSROOT or CMAKE_TOOLCHAIN_FILE instead.
Task-number: QTBUG-112951
Change-Id: Ib180b891ca8228ef1ebf9be43f2f6b8b5b5b0ee7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There's little need for us to dynamically load it. The reasons why that
was necessary aren't in the public history (Qt 4.5 already had it[1]). I
remember writing the code in 2007-2008, I just don't remember why.
On modern Linux and FreeBSD, there's no libresolv.so any more and those
symbols have been rolled up into libc.so. It's still necessary on Darwin
systems, so this commit introduces WrapResolv.
It also resolves the unity build issues relating to libresolv symbols.
[1] https://code.qt.io/cgit/qt/qt.git/tree/src/network/kernel/qhostinfo_unix.cpp?h=v4.5.1
Task-number: QTBUG-109394
Change-Id: Ic5799e4d000b6c9395109e008780643bac52122b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As described in the bug report, in cases where host Qt is built using
MSVC, these flags may leak to user projects if they are set to be
configured by a different compiler, e.g., Clang.
Pick-to: 6.5
Fixes: QTBUG-112737
Change-Id: Iad922e24cc7e7f835e08ed37271dfbedc6e38dbe
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
MSVC's own headers trigger the C4530 warning just by being included.
C:\Program Files\Microsoft Visual Studio\2022\Professional\VC\Tools\MSVC\14.33.31629\include\chrono(2206):
error C2220: the following warning is treated as an error
warning C4530: C++ exception handler used, but unwind semantics are not enabled. Specify /EHsc
Change-Id: Ieab617d69f3b4b54ab30fffd175c02c23f677d75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
`QT_ALLOW_SYMLINK_IN_PATHS` disables the
`qt_internal_check_if_path_has_symlinks` command. This allows people of
Homebrew to get their build working without having to patch the entire
function, as they currently do.
Pick-to: 6.5
Change-Id: I4fed3ca497684364eaabbdbc44f1e148e3f28bd7
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
CMake doesn't resolve REALPATH for the non-existing files.
This limitation blocks the use of REALPATH when collecting the
generated module header files. The real path should be resolved
by syncqt implicitly and CMake scripts should rely on ABSOLUTE paths
only, which should be consistent for any files including the generated
files.
Task-number: QTBUG-113295
Pick-to: 6.5
Change-Id: I0219c7bf34ef6a6589c6d5fade4c2ed3f8036ef0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
syncqt_args is initialized with common_syncqt_arguments, so no need
to append the same values one more time.
Pick-to: 6.5
Change-Id: I1588ed438b7df0b0533ad3963ca96960dd5a8dbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Problem: "ninja clean" does not fully clean the build directories of
configure-time executables (e.g. syncqt). This can lead to problems when
building with compiler and linker launchers: on configure time, the
launchers are not used (compare CMake issue #20762). After a "ninja
clean", the executable might be removed but the object files are still
there. This leads to a situation where the object files have been
created without the compiler launcher but are linked with the linker
launcher. We encountered a situation however, where the linker launcher
requires the usage of the compiler launcher.
The configure-time executable has a ${target}_build custom command that
runs "cmake --build" and creates a timestamp file to track when to build
the target. To circumvent the problem of stale object files we add the
"--clean-first" argument to that target to fully rebuild configure-time
executables if the timestamp file is out of date.
The performance this imposes is negligible, because
1. Those configure-time executables are seldom out of date.
2. They are supposed to be "tiny executables with system dependencies
only" anyway.
Pick-to: 6.5
Change-Id: I701f9089f5ad941ffdf235aeccc3119b68c4e3e3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
If syncqt process crashed due to the incompatibility with the standard
library CMake doesn't produce any useful output. This adds the message
that will give short explanation and possible solutions to fix this
behavior.
Pick-to: 6.5
Task-number: QTBUG-112747
Change-Id: Ib51aec19e3fcacf07515a3d20d72f89753bcdc33
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The macro sets the required CMake variables and policies and
should be called right after the
find_package(Qt6 COMPONENTS BuildInternals... call to make sure that
the subsequent code adopt all the required policies.
Pick-to: 6.5
Task-number: QTBUG-112685
Change-Id: I9f93f728ee4d8ae7743db9fffafa26025c76dcf2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module information .json gained a "plugin_types" key in 6.5.0.
Unfortunately, this contained the "sanitized" version of plugin types,
meaning dashes converted to underscores. For plugin types that contain
dashes, e.g. wayland-decoration-client, the file contained
wayland_decoration_client, which doesn't match its plugin directory
name.
Since "unsanitizing" plugin names is hard and "sanitizing" is easy, we
now store the unsanitized plugin names and burden the consumer of the
module .json files with the sanitation task.
[ChangeLog][CMake] The module information JSON files now contain the
unsanitized plugin types of a module, e.g. wayland-decoration-client
instead of wayland_decoration_client. Consumers of the module
information file must sanitize plugin types themselves if necessary.
Pick-to: 6.5
Fixes: QTBUG-112872
Change-Id: I09cc9406b360779087086707abee3d5219a24452
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Like qt-configure-module.bat, when building with unity build, CMake
needs to know the full path of the source directory to be able to
correctly generate its `*_cxx.cxx` files. So far, this seems to only
affect Windows' LLVM/MinGW builds. By this patch, I make sure that we
pass the full path to CMake.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: Ida2da127ecba95856b6e0091936c471c2a116936
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode 14's Clang will emit objc_msgSend stubs by default, which ld from
earlier Xcode versions will fail to understand. Disable these stubs
explicitly for static libs, for as long as we support Xcode < 14.
See https://github.com/llvm/llvm-project/issues/56034
Pick-to: 6.5
Fixes: QTBUG-112820
Change-Id: Id762873d61b9d147bf3eb6292297e7b80b7393e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In unity build, when calling qt-configure-module.bat, if we don't pass
an absolute path, CMake will not be able to resolve the header paths in
`*_cxx.cxx` unity headers. So far, this only happens on Windows/LLVM,
and it is probably an oversight on CMake side, as passing a path without
drive letter is perfectly fine in most cases, and CMake can handle it.
We don't need the TO_CMAKE_PATH, as `get_filename_component` also does
the transformation.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: I474750af13291cbf1a46a12be5fc4a0f6e88accf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
lld 16.0 is more picky about symbol versioning than previous versions
(and other linkers such as ld.bfd, gold or mold).
It now errors out if a symbol is versioned but not defined
(see 8796677de8900dc154aef45f8620c3f987a40291).
Outside of detecting support for symbol versioning (fixed by 462832),
this causes linking Qt6 libraries other than Qt6Core to fail because
their linker scripts try to add versioning to qt_version_tag, which is
defined in Qt6Core rather than the library being linked.
The obvious (and working) fix is to version qt_version_tag only where it is
defined (Qt6Core), but this is not what the original intent seems to be.
Task-number: QTBUG-111514
Change-Id: I963d417befb0f6b2260c57f059eeda1fe79200c9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The checks for the environment variables ANDROID_SDK_ROOT and
ANDROID_NDK_ROOT were guarded by if(DEFINED) conditions. However, these
variables are *always* defined by the code that iterates over
__qt_toolchain_used_variables earlier in the toolchain file.
Change the existence checks into emptiness checks.
Pick-to: 6.5
Change-Id: I6c87f86068817e45dd2325359827c6fa4dae6279
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Besides `stringop-overflow`, the `stringop-overread` is also buggy, and
it has some false positives. If not silenced, this will break the
unity build as several warnings are being emitted in qmetaobject.cpp,
etc.
Pick-to: 6.5
Change-Id: I708c81057c01d8d8fc9694c394c89602a2f6867b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This should help anyone stumbling upon them to realize that they should
not be modified directly.
Change-Id: Ib5218babdb8943646e222342f1040e5bba693076
Reviewed-by: Olivier De Cannière <olivier.decanniere@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the timestamp file creation for configure-time executables.
GNU make treats the custom command artifacts as 'dirty' when one of
the expected outputs is missing. It displays the following disclaimer
Deleting primary custom command output ... because another output
... does not exist.
which leads to the configure-time executable rebuild. The removal
and rebuild is not in sync with the dependency lookup for other
targets(thanks to GNU make) so targets that depend on the
configure-time executables simply miss the dependency at build time.
This happens to syncqt and '_sync_headers' targets. So creating
the timestamp file at configure time indicates to GNU make that
there is no need of removing the syncqt executable and the build
process doesn't fail because of missing dependency.
Fixes: QTBUG-112018
Fixes: QTBUG-111163
Pick-to: 6.5
Change-Id: I6c1e8cae522104cf50d0376fa2b5653a6770f9ca
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As I was investigating the NO_UNITY_BUILD_SOURCES issue, I realized that
we don't need to pass these quoted, especially now that we have moved
to `cmake_parse_arguments(PARSE_ARGV`, and we can check their existence
just by checking the `arg_*`, and that should be sufficient.
I also left a warning that we are aware of this.
Pick-to: 6.5
Change-Id: I4d939e80dc4671ea3ae9dc61516279f69ba2c5a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The source of the problem was in `qt_set_target_info_properties` which
was not able to process the NO_UNITY_BUILD_SOURCES, and therefore
leaking it into the `TARGET_COPYRIGHT`, ie., the last argument. So, I
decided to pass Unity Build arguments before them, and closer to
SOURCES, which is nicer to read, and avoid similar situation. And
I reverted the work around in the amend commit, and passing the
arguments normally.
This happens because we pass an unfiltered ${ARGN} from
qt_internal_add_executable to qt_set_target_info_properties and that the
current change is merely a workaround that ensures they get
circumstantially filtered out, because the NO_UNITY_BUILD_SOURCES option
appears before any of the first TARGET_ props.
Amend cd12c1f332
Task-number: QTBUG-99238
Task-number: QTBUG-109394
Pick-to: 6.5
Change-Id: Idb37937cf53e708425402c90f55bda8816e27f29
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add CMake rules to skip syncing and installation of header files
that are recognized as non-module. Previously these rules were in
syncqt.cpp only and CMake ignored them when creating the installation
rules. Now we skip any post processing for the header files that:
- are public and located in the '3rdparty' directory unless the module
is the 3rdparty one
- are not a part of the module source tree unless they are generated
- have the _qt_non_module_header property set to TRUE
Pick-to: 6.5
Change-Id: I045cfc2b8074f0c086c975aae95f14845e3edfef
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to pass the list of generated files to make the correct
filtering when generating the module master header. Otherwise
generated headers will endup in the module master header.
Pick-to: 6.5
Fixes: QTBUG-112458
Change-Id: Icd20fe5999db379d0eafbff7dad20765e1a96350
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Right now, image picker view is shown first (it does
not require access to photos, since it's essentially
Photos app getting access to photos ...). Then, we use
AssetsLibrary to get asset for an url (using ALAssetsLibrarie's
-assetForURL method). This may trigger a permission-related alert, asking to:
a. Select more photos or ...
b. Allow access to all photos or ...
c. Deny access.
Showing this alert _after_ picker has selected an image makes little sense
(and probably was never intended this way anyway). Instead, we now use
Photos.framework to check the authorization and, if needed, we request
an authorization (when the current status is 'Nondetermined'). If authorization
is 'Granted' as a result, we show picker view and proceed as normal/before.
Pick-to: 6.5
Task-number: QTBUG-109120
Change-Id: I0acfd7b0476346360d75a5e37f5845aaf2d6e3e0
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For -developer-buildS qt_find_package caches which packages were found
on the first configuration, to make the build system pick up a newly
added qt_find_package call one needs to follow one of the methods
that are now mentioned in the docs.
Hugely based on commit message from commit
6847a19e3e.
Change-Id: I4a13d3c97a6172f504a57298c4b3edee30d21250
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Store the target architecture in the module information files under the
key 'built_with.architecture'.
Task-number: QTBUG-111158
Change-Id: Ida4cde3b15103773824a8d9d78f082540b806736
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allows sharing tracepoints between modules so that they can share one
trace group.
Pick-to: 6.5
Change-Id: I8de6da6beef02b34700cc2ecb1fad0e72a00b7e0
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
If Qt was configure with QT_NAMESPACE set, store that in the module
information files under 'built_with.namespace'.
Task-number: QTBUG-111158
Change-Id: I273309cb263c64f801dbb7238440336d7afa635e
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Maintain one central place - .cmake.conf - for information
about Qt's copyright.
Pick-to: 6.2 6.5
Change-Id: Ibcbce4313eba9660d459061b0ad00307e267b8f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Removed the NO_UNITY_BUILD argument from commands that disable it by
default.
- Add a warning in case NO_UNITY_BUILD or NO_UNITY_BUILD_SOURCES is
being used where it is already disabled, e.g., qt_internal_add_test
- Exclude all sources of a target from unity build if NO_UNITY_BUILD
is set on the target. This sounds a bit harsh, but I have noticed that
sometimes the same source file can be included somewhere else, and
some unexpected collision may occur.
- qt_examples_build_end excludes all its examples from the unity build.
- qt_build_test now sets the CMAKE_UNITY_BUILD to OFF before configuring
the tests, and restore its value when done.
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: Ia42e7dd5a5bfb151db241deb639325720fd91eec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake does it for non-project-based try_compile calls if the
CMP0056 policy is set to NEW. That was introduced in CMake 3.2,
thus set it unconditionally.
The use case is to pick up custom -rpath-link paths when
cross-compiling.
Pick-to: 6.4 6.5
Change-Id: I726b90267dd46de116052b5b7f19b9354a568200
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This should be handled later ideally, for now we should skip and
QML tests targets are still being produced, which leads to errors
on WASM.
Task-number: QTBUG-109786
Change-Id: I3d0d1f3115e324c7a0cb036e972226310294b216
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Calling qt_process_qlalr with a skipped/batched target name results
in an error. Do the same as for other helper functions and handle
these two cases.
Task-number: QTBUG-109786
Change-Id: I774b148989a25d01bdf724e69a722aae132389ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests generated with qt-cmake-standalone-test will now not be
batched by default. Defining the QT_BATCH_STANDALONE_TESTS
environment variable will make the build system batch them.
Fixes: QTBUG-111226
Change-Id: I9f01c662e22f8ffdd33e1c4d82619db0689fecc7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_test_helper will fail if a test batch is missing and
batching is enabled. It will now copy to the parent binary directory
as without batching for simplicity, as this happens when batched tests
are skipped.
One consequence could be that when the first test specified has
the NO_BATCH argument, this will incorrectly install the helper, but
helpers still need extra work to function properly, so for now we just
make it compile.
Task-number: QTBUG-109786
Change-Id: Ib307ae79799422c2a4102885aa007ef043835e50
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The result of dependency lookup is not taken into account when
evaluating tool packages. Check for <ToolPackage>_FOUND before creating
the tool targets that belong to the tool package. Adjust the tool package
lookup that the dependencies always affect the lookup result even if
we avoided creating targets by setting QT_NO_CREATE_TARGETS.
Pick-to: 6.5 6.5.0
Change-Id: Ia95c9c71370becc639ed8a9db026aed2f93959b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Firebird has it's include files in <include>/firebird so we should also
search there.
Pick-to: 6.5 6.2
Change-Id: Ief57abbfd6973ab9077abc1a1a2791a62ce4102a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is related to QTBUG-110978, but not a complete fix.
Task-number: QTBUG-110978
Change-Id: I91b757addde8213ba3d356a590f6e4cf68187c31
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Manual tests are supposed to display UI and be assessed manually, but
currently they use the auto test runner by mistake.
Use the normal wasm shell to fix this and make them work like usual
applications.
Fixes: QTBUG-111753
Change-Id: I9d3c0ad56e913b73737c5b72087e82980989d8b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Supressing the linking warnings on macOS are relevant when we are
using AppleClang and not upstream Clang.
The provided arguments do not apply to llvm-ar and llvm-ranlib.
Change-Id: I8b664c01802b47077eb0ab80dab7681ee0bfcaa9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When doing a top-level build with ExternalProject examples, it doesn't
make sense to make qtbase examples depend on e.g. qtdeclarative
plugins. Instead the qtbase example should only depend on plugins
built in qtbase.
Create per-repo custom targets that depend on all plugins built within
that particular repo.
Create an additional per-repo target which depends on all
plugins built in that repo, as well as plugins from dependent repos.
Use the latter as a dependency for examples built as part of the
current repo.
Repo dependencies are parsed from dependencies.yaml.
Pick-to: 6.5
Fixes: QTBUG-110913
Change-Id: I149860cc549caf53271c9ea296eb7bac2a663715
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Recent Emscripten 3.1.27 reduces the stack size to 64KB,
which is way to small for Qt-based applications.
Restore the previous stack size (5 MB) by setting STACK_SIZE.
Change-Id: I6c25e31b32dc1d551fa423655fcef4891830bcd1
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
They now share their implementation. Manual tests can be created by
passing the MANUAL arguments to the qt_internal_add_test as well.
Pick-to: 6.5
Fixes: QTBUG-111382
Change-Id: I1c207b7e4a67526554df1ee43fe032bb20fc92fa
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The previous attempt failed as target coin configuration doesn't
use superbuild. Skip the tests based on the TESTED_MODULE_COIN
environment variable
Task-number: QTBUG-109786
Change-Id: I0dbe6ff64ca4a2e81fef377865ef4e99b58c5eb2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We set CMAKE_POSITION_INDEPENDENT_CODE to ON and require CMake 3.16.
This sets CMP0083 to NEW and should pass -fPIE to linker calls as well.
However, the PIE-enabling flag is not passed to the linker unless we
call check_pie_supported(). This behavior is documented in CMake's
CMP0083 documentation page.
[ChangeLog][CMake] Qt tools are now built with position independent code
even with Unix toolchains where this is not the default, for example
clang.
Pick-to: 6.5 6.4 6.2
Change-Id: I1d98e0ea7063a76e3fddc94d6555c6eaf14c7885
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Properties specified in EXPORT_PROPERTIES have their values exported
verbatim, without evaluating generator expression they might contain.
This limitation is removed by the introduced functions. They collect
properties that needs to be exported and evaluate generator
expressions inside the properties using file(GENERATE) before
exporting them. The functions generate the ExtraProperties.cmake
file that contains set_property calls with exported properties
and corresponding values.
Change-Id: If32c30a82a62e8bd48bb91f3df21ff2ad8d07243
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e3ecabad22.
Reason for revert: This breaks the CTest internal switches. So it's better to disable testing directly in submodule.
Change-Id: Ia93dc3bb0a3a34021c8e2d6c3d292e3a4909bef5
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This switch should help switch off some time consuming operations
that make sense only whe configuring Qt project from IDE.
The switch is INTERNAL and depends on environment variables defined
by IDE application when running cmake:
- Qt Creator, detected by QTC_RUN environment variable
- CLion, detected by CLION_IDE environment variable
- Visual Studio Code, detected by VSCODE_CLI environment variable
Pick-to: 6.5
Change-Id: I44086376109a8af8ebb7ecd8bf64dc34f0631527
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QtSql for Mimer SQL sqldriver makes it possible to work with the
Mimer SQL database on different plattforms. There are drivers for
several other databases in QtSql and a driver for Mimer SQL will
benefit many users.
To build the Mimer SQL driver, download Mimer SQL from
https://developer.mimer.com
[ChangeLog][QtSql]
Added a QtSql plugin to work with the Mimer SQL database
Fixes: QTBUG-111219
Change-Id: Id6ba5de4de01189d0516ffbfa89efcb0d013115f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 545400addd.
Reason for revert: Adding NO_CMAKE_PACKAGE_REGISTRY doesn't resolve the initial issue. So reverting this change as redundant.
Change-Id: I284600d6f0e0f2408a7a8b31827251dad4c73eba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 854986836a.
This reverts commit 392d9a5419.
Turns out that enabling this option is now breaking the Qt build,
because tools that are called by the Qt build cannot run anymore due to
the lack of rpaths.
Before, QT_DISABLE_RPATH was simply turning off Qt's additional rpaths
but left CMake's rpath defaults intact.
To implement a working -no-rpath switch we must add Linux and macOS code
paths to _qt_internal_generate_tool_command_wrapper and set
LD_LIBRARY_PATH/DYLD_LIBRARY_PATH and friends.
Pick-to: 6.5
Fixes: QTBUG-110816
Change-Id: I021d5e6cd775cbe5b2411d6771ab2545cb04f799
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Allow forwarding the NO_CMAKE_PACKAGE_REGISTRY option to the
find_package call from qt_find_package.
When we look for host tool packages the package dependencies are
recorded in the cmake package registry. This leads to the situation
when the lookup retry will use the package that is already found in
host path instead of looking the right one in target paths.
Adding the 'NO_CMAKE_PACKAGE_REGISTRY' to the qt_find_package calls
suppresses records in cmake package registry and starts a clean search
using target paths.
Task-number: QTBUG-111140
Pick-to: 6.5
Change-Id: I97ce1755b2f8e3413f1b0276fe26568b2f5efe33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This leads to unwanted side issues such as building and running third
party component tests. The option should be enabled explicitly by
user instead.
Fixes: QTBUG-111091
Change-Id: I8942db2bd089ad2a39a70627bfce8314b101ecb8
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Cleanup the generated message regarding the configuration summary. Also
moved the flushing into the helper function.
Pick-to: 6.5
Change-Id: I45728ac5b43613f002b6d5b07b9ad037416c4fff
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Apparently, more and more librt functionality are being moved to glibc
these days, e.g., clock_gettime, clock_getres, clock_settime,
clock_getcpuclockid, clock_nanosleep. As Thiago mentioned, in face,
all librt functions are moving into glibc, but unlike the clock_*
functions that I can see are ported from 2.17+, I cannot find out when
and what functions are already ported. So, here, I added a second test
which tries to explicitly look for shm_* functions, if they are there,
as well as the clock_* function, then we are more confident that we
actually have a useful the libRt in the system.
Also, making the FEATURE_posix_SHM depends on UNIX.
Pick-to: 6.5
Fixes: QTBUG-111049
Change-Id: I08b7f4656ecd9313b552fb05ca7096f5b987b95a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tracepointgen tool needs to know the enumeration/flag names
and values in order to generate metadata for the tracepoints
in order to pass this information when tracing.
Currently the metadata needs to be provided to the tracepointgen by
hand. This implements metadata parsing from header files.
Task-number: QTBUG-110598
Pick-to: 6.5
Change-Id: Ibb2cc6e724fd2defca4e301af2285b0fdbe8e7f7
Reviewed-by: Antti Määttä <antti.maatta@qt.io>
Consider a Qt target created in a subdirectory and a call to
qt6_generate_deploy_app_script(target) in the parent directory.
Once qt6_generate_deploy_script (called by
qt6_generate_deploy_app_script) is run, the target has already been
finalized. However, qt6_generate_deploy_script needs to run before
finalization, because:
- qt6_generate_deploy_script marks the target as to be deployed
- the finalizer generates plugins information only if the target was
marked to be deployed
Fix this in qt6_generate_deploy_script by checking whether the target
was already finalized. In that case, generate the plugin deployment
information right away.
Pick-to: 6.5
Fixes: QTBUG-109741
Change-Id: Idf60f9e21f038c1a33843177d9299230857ee70b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If -unity-build-batch-size is not given, we default to CMake's default
which is 8. In QtSetup.cmake, we explicitly set the default to avoid
having it set to OFF in case it is missing, just to make sure that we
don't get any unintended behavior.
Task-number: QTBUG-109394
Change-Id: I19849e9baa507b64fb23847c740e20a7adc61b8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- The following commands accepts NO_UNITY_BUILD, and
NO_UNITY_BUILD_SOURCES arguments to opt out of the unity build, and
to exclude some source files from unity build, respectively.
- qt_internal_add_executable
- qt_internal_add_module
- qt_internal_add_plugin
- qt_internal_add_tool
- qt_internal_extend_target
- qt_internal_add_common_qt_library_helper
- qt_internal_add_cmake_library
- qt_internal_add_simd_part
- Unity build is disabled by default in these:
- qt_internal_add_test
- qt_internal_add_test_helper
- qt_internal_add_benchmark
- qt_internal_add_3rdparty_library
- qt_update_ignore_pch_source also excludes the files from unity_build
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: I5d0e7df633738310a015142a6c73fbb78b6c3467
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the qt-cmake-create script. The script generates the simple
CMakeLists.txt based on the source files located in the current or
specified directory. The initial version can generate a CMake code for
the following file types:
- .c .cc .cpp .cxx .h .hh .hxx .hpp - generates the qt_add_executable
call with prerequisites.
- .qml .js .mjs - generates the qt_add_qml_module call with
prerequisites.
- .ui - adds the found ui files to the existing executable. Requires
C++ files be present in the directory too.
- .qrc - generates the qt_add_resources call and adds the resources
to the existing executable. Requires C++ files be present in the
directory too.
- .proto - generates qt_add_protobuf call with prerequisites.
The QtInitProject.cmake script contains the 'handle_type' function that
allows extending the script capabilities and establish simple relation
chains between the file types.
Note: The initial implementation doesn't deal with sub-directories, so
all files from sub-directories will be added to and handled in the
top-level CMakeLists.txt file. This can be extended by user request.
Task-number: QTBUG-104388
Change-Id: I5abd9e07da109e867ff95986572ed2bf02ef9d3d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This somewhat indicates the progress of configuring a specific
repo and the slower period of time when configuring examples
in-tree.
Pick-to: 6.5
Change-Id: I643536c4ebc865933730b7af2a1d0c56bbbf2912
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This reverts commit d7e8d5bb1b.
Reason for revert: Found a working solution for the issue.
Change-Id: Ia720cc63ece9dfb1a24067cdd9c3d79d4edbe3be
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- If no version specified, policy version is set to 6.0.0, therefore
warnings will be shown, encouraging users to set a policy.
- Update qt_policy() documentation
- Update qt_standard_project_setup() documentation
- Update the policy warning message
- Added the missing comment to clarify the extra_code region
Pick-to: 6.5
Task-number: QTBUG-96233
Change-Id: I8358fdeb880a34c96f13fc2a6cbef6afe048c4d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
To extract system proxies, the one we used previously, was not available
on iOS and thus we could not obtain system proxies there. Support is
limited - no such things, as SOCKS/FTP/etc. proxies, only PAC (auto
configuration), and HTTP/HTTPS. There are no keys to extract info
about HTTPS, so instead we'll use CFNetworkCopyProxiesForURL (
looks like this enables exclusion lists (which are hidden)
functionality and apparently from the system point of view HTTP/HTTPS
are the same.
Fixes: QTBUG-39869
Change-Id: I73af719a2e2b5cded706e6b3faa4b8eaa879352b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Right now, "multi abi builds" of android projects works only if the
android-build installation doesn't use custom install dirs
(INSTALL_PREFIX, INSTALL_BINDIR...)
At the same time, it fixes QTBUG-106533. The patches are the same as the
ones in that bugreport.
Add new items to android-*-deployment-settings.json:
qtDataDirectory
qtLibsDirectory
qtLibExecsDirectory
qtPluginsDirectory
qtQmlDirectory
Update androiddeployqt to be able to get files from their install location
BTW (fixes QTBUG-106533):
Install src/android/templates into INSTALL_DATADIR
Install src/3rdparty/gradle into INSTALL_DATADIR
Install src/android/java files into INSTALL_DATADIR
Install all jars into INSTALL_DATADIR
Add missing path to target_qt.conf
Update target_qt.conf to have all path. Otherwise qmake wouldn't have
the path when installing the android-build with custom install dirs
like INSTALL_LIBDIR & friends
Add support for a new cmake variable that can be set at build time of the
android projects: QT_ANDROID_PATH_CMAKE_DIR_${abi} (Name chosen as
brother of QT_HOST_PATH_CMAKE_DIR)
Pick-to: 6.5
Fixes: QTBUG-106533
Fixes: QTBUG-107207
Change-Id: Ia3751362ab1b5f877ecafbe02f263feac167119c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
KDE Frameworks tests this in one build configuration. Verify that we
do not break it in public Qt headers.
Task-number: QTBUG-110585
Change-Id: I5c976d00d7b1aba026e99acb9bad176103e23b0b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
We must not set rpath-related properties on INTERFACE libraries. Move
the code that sets the properties below the bail out for INTERFACE
libraries.
This amends commit 392d9a5419.
Pick-to: 6.5
Fixes: QTBUG-110513
Change-Id: Ie395f1482245c4522917f982d2f3bc745c0b2abc
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The extra quote enforces the arguments to be string, and stops the
COMMAND_EXPAND_LISTS within
QtDbusHelpers.cmake::qt_create_qdbusxml2cpp_command from expanding it
as a list.
Fixes: QTBUG-110459
Fixes: QTBUG-110450
Task-number: QTBUG-99238
Change-Id: Ifddd6570c7bf8f2d1757f275d9445ce2924a93f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The batcher does not currently work properly with non-qtbase
submodules. Disable them temporarily so that at least the
tests in qtbase are batched. Do this from qtbase so that changes
to each and every submodule are not necessary.
Also, maintain a list of tests that were thus skipped. On any
qt cmake internal function call that refers to such a target,
identify the target as skipped and make the call a no-op.
Fixes: QTBUG-109785
Change-Id: Ib0aa5d39eee8315ffd4ac62f6d1f44fe9bbf7a2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
AUTOUIC doesn't handle relative paths to .ui files in parent
directories when using Ninja Multi-Config.
The designer tool in qttools has such a ui file. This leads to the
following error when trying to build qttools together with examples as
ExternalProjects and Ninja Multi-Config:
ninja: error: 'src/designer/src/designer/designer_autogen/
include_Debug/ui_preferencesdialog.h', needed by
'src/designer/src/designer/designer_autogen:Debug',
missing and no known rule to make it
Until cmake is fixed, we can work around the issue by not adding
designer as a dependency when building EP examples, because no example
tries to use the app.
We can't exclude all apps from example dependencies because some
modules use qt_internal_add_app for tools as well, which are called
from public CMake API and also examples.
An example of this is qtapplicationmanager.
Given that we can't exclude all apps, introduce a function to
allow skipping single targets when building EP examples.
This will allow excluding designer specifically.
The examples will now depend on a new ${repo}_src_for_examples target
rather than ${repo}_src, which will exclude skipped targets.
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Task-number: QTBUG-110369
Change-Id: I2f900253bbf7bac917f2293ef604ab3ea8f298e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In addition to the fix, I've removed some legacy codes in the
`configure` file and delegated most of the work to
the `QtWriteArgsFile.cmake` which was being used by `configure.bat`. I
am not sure how this was supposed to work before since it was not really
working, but now, `config.opt` lives in the build directory, together
with `config.opt.in` (a template file), and the `config.redo` (and
`config.redo.in`) which holds the full redo command. The template files
are being used to preserve the quoted variables and to help
QtWriteArgFiles process the opt files more consistency.
Also fixed an issue on Unix, where ./configure was failing to run if
its path contained spaces, e.g., `Qt Src/qt5/configure`.
Fixes: QTBUG-108287
Change-Id: I9843b690a1fd3177a93e55e08a3484a4c85ba2e8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This alone isn't enough:
Feature "xcb": Forcing to "ON" breaks its condition:
QT_FEATURE_thread AND TARGET XCB::XCB AND TEST_xcb_syslibs AND QT_FEATURE_xkbcommon_x11
Condition values dump:
QT_FEATURE_thread = "ON"
TARGET XCB::XCB found
TEST_xcb_syslibs = "FALSE"
QT_FEATURE_xkbcommon_x11 not evaluated
But when it says:
-- Performing Test XCB (extensions) - Failed because XCB::CURSOR not found
The user can know what to do.
Pick-to: 6.4
Change-Id: I810d70e579eb4e2c8e45fffd1719c0abf608ed30
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
