This test has been repeatedly unstable.
Task-number: QTBUG-24796
Change-Id: I603965c0189ad6da0cdf48527c4919c55e1918b4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Although passing a null pointer to pcre16_get_stringnumber for
the compiled pattern should simply make it error out, it's actually
an undocumented behaviour, so let's stay safe and add an explicit
check.
Tests for this codepath are added.
Change-Id: Ifd9c87874f6812ba487104ec1a5bbc83c3b16761
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE's JIT uses by default 32K on the pcre_exec caller's stack. This
is fine for most situations, but in some cases (esp. patterns with
lot of recursion) more memory is required.
Therefore, if a match execution fails due to exhausting JIT memory,
we let PCRE allocate up to 512KB to be used for the JIT's stack.
The pointer to the allocated memory is put in thread local storage
(so it can be reused from the same thread, if needed, and automatically
goes away when the thread dies).
Change-Id: Ica5fb7d517068befff88ebb198a603a26ec5d8a7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Exporting the counter that controls the optimization of a compiled
pattern lets us to forcibly optimize all patterns. Therefore,
two tests are now run: one with default optimization values
and another one which always optimizes the pattern.
The counter itself was renamed with a qt_ prefix and put
inside the Qt compilation namespace
(thanks to rohanpm for pointing it out).
Change-Id: I56602433d37adc127772b2d0d2cdaf2e49d43c71
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some minor fixes: obviously, a valid match always come from a
valid regular expression, but a valid regular expression can create
an invalid match (internal error during matching).
Also, testing an invalid iterator should silence the emitted
warnings.
Change-Id: I585bb99a81e22f108601fd66bf30b56e0229d68b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRegularExpression::captureCount() returns the number of
capturing groups inside the regular expression pattern.
Change-Id: Ib90ce67c67d06ab2966f0c98bd91da21defc156d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Trivial change: compare dpointers first, then the data.
Added test function for operator==.
Change-Id: I33ac64a59db4ccad56c30be17622187e42415f38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Added QRegularExpression, QRegularExpressionMatch and
QRegularExpressionMatchIterator as PCRE-enabled, regexp classes.
Documentation is included, as well as a first round of autotests.
Task-number: QTBUG-23489
Change-Id: Id47031b80602c913ccd2fd740070e3024ea06abc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Specialise QTypeInfo<QPair<T1,T2>> based on the properties of
T1 and T2:
- If either T1 or T2 is Q_COMPLEX_TYPE, so is QPair<T1,T2>.
- Otherwise, if either T1 or T2 is Q_MOVABLE_TYPE, so is QPair<T1,T2>.
- Otherwise, QPair<T1,T2> is Q_PRIMITIVE_TYPE.
Change-Id: I8aecbd37e3b7924f77f38967498deabf1a19ca24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- It was trying to install syslocaleapp sub program as TESTDATA
instead of an application.
Change-Id: I2117d11335bc2fd37a8ccc9a03b0337382f0177f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those escape sequences have a special meaning in the XML Schema 1.1
regular expressions, but not in Perl-compatible ones.
An escape sequence that has no special meaning should match the
escaped character itself; this patch fixes QRegExp's behaviour in
that regard (previously, it added a character class matching
nothing).
Change-Id: I983f923baa7c2ec19938b96353f3a205e6c06d58
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Skip the failing windowsDefaultLocale() test.
- Improve the handling of the subprocess, locate
the binary in initTestCase instead of repeatedly searching it.
- Make all applications console/non-app bundles.
Task-number: QTBUG-24543
Change-Id: I79dfaa3320cd5698f02e74a3fe53477d4a79d4fb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This adds Sha224, Sha256, Sha384, and Sha512 enum values to
QCryptographicHash::Algorithm. The implementation comes from RFC 6234,
http://tools.ietf.org/html/rfc6234, which is added to
src/3rdparty/rfc6234. Only the headers and SHA-2 code is included in
src/3rdparty/rfc6234 (the SHA1, HMAC, and HKDF code is not included).
Change-Id: I85139fd118291f15efc22899a5ddd1cc83810cfb
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fixes a crash when invoking various QRegExp methods on an object
*before* doing any match. For instance fixes:
QRegExp re;
re.matchedLength(); // crash
Task-number: QTBUG-23352
Change-Id: I9c239ff790a139c7820ef1aeced89d31320ae6b0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This setting is extremely harmful, as code cannot know whether or not to expect
it. It also made the behaviour of QString::fromAscii and ::toAscii unintuitive,
and caused a lot of people to make mistakes with it.
Change-Id: I2f429fa7ef93bd75bb93a7f64c56db15b7283388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The move constructor sets other.d_ptr to zero. This is safe, because
after being moved from, the object is left in a state in which it
can be safely destroyed (delete nullptr is a no-op).
It cannot meaningfully be used anymore (most members will crash with
a nullptr dereference), but in most cases, the moved-from object
cannot be accessed anyway (not a named object), and if a named object
is moved from, it must have been through explicit std::move(), as in
the test case.
The STL makes better guarantees (moved-from containers are .empty()),
but I don't think it's worth introducing a null state into
QEasingCurve just for supporting a use-case that should be
considered a bug anyway.
Change-Id: I4115b7386cdea6960507da6843a0d0196d8e4139
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented as in QPen etc.
Change-Id: I65b43c6ec7308ca4b44f614594c15c41ab2f89f9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implementated as in QPen etc.
Change-Id: Ia08551bf7902b60e115d1b1d2353030597e34841
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qcryptographichash to use TESTDATA and QFINDTESTDATA
Change-Id: Ic3a1bdccc9f81605c648dab2a642421d17f7fe80
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This architecture is obsolete and discontinued.
Support for PA-RISC can be re-added if needed, but it would be preferred
to use the GCC intrinsic support from qatomic_gcc.h (on Linux/HPPA, for
example).
Change-Id: I952e521a2c8c68840df0d44843b5487d5c20b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Check the validity of date/time before attempting to perform maths.
Change-Id: Ia6a2caf07c6c36f7d7fac713a77bc4eb456c6ed6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few methods in QString still assumed that QLatin1String
is always 0 terminated. Change this to rely on the size
provided by QLatin1String instead.
Change-Id: I9145a46e52ed8811f3b4e3d72d8a81a12588760a
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLatin1String now has a constructor that takes explicit length, which makes it
possible to create QLatin1String that do not have null-termination character.
Fixed QString::operator> and < to be safe in that case.
In the same patch fixed qtjson which had operator< implemented in the same way.
QString::compare(QLatin1String) is still broken and will be fixed separately.
Change-Id: I48ec1183a6f44034129cc17312af854795085408
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fix a couple of cases where WildcardUnix was not matching when the
string was just [] or ended with a \.
The testWildcardEscaping() test has been extended to account for these
two cases too.
Integrate 7ce3726aea4be2dfdb57966a4482f66fec6f8f57 from 4.8
Task-number: QTBUG-20897
Change-Id: I7a07ac008473fa7a080db752e189f6404842603f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we request a substring starting at the very end of the string,
QString::mid should return an empty string, not a null string.
For instance, QString("abc").mid(3, 0) used to return a null
one, while this patch makes it return an empty one. The
same thing applies to QString::midRef() and QByteArray::mid().
Change-Id: Ie9efd7a0622d429efd0fb682c19856c19e9469af
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
