In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If the resource path 'base' was relative it would enter condition 3) in
qFindTestData() and it would actually find the nonsensical "://data" as a
viable candidate. We don't want to enter that case, but rather enter the
subsequent ('Try resources') case
Change-Id: I1928ba02c941e23fee4fec9052a1981e46fa59b7
Task-number: QTBUG-73512
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Noticed this when running Qt Creator against dev
Change-Id: Ie75b2e0f2a77033ce0455d7ee3304193aa6e511c
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
This commit introduces a new feature called vkgen for the tool which
depends on xmlstreamreader.
Note that when features.vkgen is disabled, vulkan.pri will generate
dummy qvulkanfunctions.h and qvulkanfunctions_p.h because buildsystem
needs them.
Task-number: QTBUG-76159
Change-Id: I03d526a0fd76a2d8b531940f37538cead109d9d3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
You can create multiple instances of QBenchmarkGlobalData as the ctor
is public.
The qmltest plugin does create a static one, but only conditionally
assigns it to the singleton pointer. On shutdown the plugin is removed
and the QBenchmarkGlobalData::current should only be reset by the dtor
if it's actually pointing to the same object.
Change-Id: I616c1ccf6f7a00abf1de342094da88481510bc7b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
That code would normally call for QSet::find instead
(Uniform Container Find cannot come soon enough).
Since the code is showcasing a STL algorithm usage,
port it to std::find_if to showcase a real use case.
As a drive-by: fix the usage of endl with std::cout.
(Ok, it's just a variable called "cout", and I'd argue
that in example code "cout" is not the name of a
QTextStream).
Change-Id: I8686178b33c31552eb4d909a4089453d60994b79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the QSet QWidgetPrivate::allWidgets directly instead of
calling QApplication::allWidgets(), which allocates a QList.
Change-Id: I16d289030cecefae7811d4b2c94f865f46f700d5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reduce our usage of QRegExp in preparation towards deprecating
it. This also brings it in line with QDir that already uses
QRegularExpression for filtering.
Keep the old QRegExp based code around in bootstrapped mode,
since qmake uses this functionality.
Change-Id: I98b9d2875c30e17e406b6711dfe3265ba37624ac
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends b03385f9cf.
Java-style iterators are scheduled to be deprecated.
The general pattern used in the patch is that instead of copying an
input list, then iterating over the copy with some calls to
it.remove() (which leads to quadratic-complexity loops), we simply
copy conditionally (a la remove_copy_if instead of remove_if).
To make clearer what's going on, rename the outgoing list to
'unhandled'.
To avoid having to touch too much of the loops' structure, which
sometimes is quite convoluted, use qScopeGuard to do the append to
'unhandled', unless the original code removed the element.
Change-Id: I808a939b9c816b329ee87620e0a3461fee6e3e40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace the identity check with a check for the underlying QHash
objects being shared and replace backwards iteration, which is really
forwards iteration with wrapping at bucket boundaries, with forward
iteration. QSet cannot contain duplicates, so the order in which the
RHS elements are presented to the algorithms does not matter.
Change-Id: Iad8528e3a9501b14cb85601b221a848aad91480c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QWidgetPrivate::windowHandle() should not return nullptr from the
WindowHandleMode::Direct branch in case WindowHandleMode::Closest was
passed.
Ameds eed9a8fbd3.
Task-number: QTBUG-62094
Task-number: QTBUG-73231
Change-Id: Ia55fff15f0a499cef9525e53111ddd55b2e012d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QNetworkReply implementation for Qt for WebAssembly now supports
usage of the QNetworkAccessManager::sendCustomRequest, making it
possible to send requests with custom verbs.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed
QNetworkAccessManager::sendCustomRequest for Qt For WebAssembly.
Fixes: QTBUG-76775
Change-Id: I9394ffef110fce4ed2c877893631bedc7631f71e
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This seems to be a common use case, and to be expected from pastes
of MSWord documents.
Change-Id: I5849d7f51408e76f15a0b03c2118649f118af1d6
Fixes: QTBUG-66794
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because it is. It's just QCoreApplication::postEvent(), which is thread-safe.
It also _has_ to be, because we recommend to use deleteLater() to delete
QObjects that live in another thread:
Quoting the ~QObject() docs:
> Warning: Deleting a QObject while pending events are waiting to be delivered
> can cause a crash. You must not delete the QObject directly if it exists in
> a different thread than the one currently executing. Use deleteLater()
> instead, which will cause the event loop to delete the object after all
> pending events have been delivered to it.
If deleteLater() is not thread-safe, it cannot be used for one of its intended
purposes.
Change-Id: I333d506b42bdfcdff00fe6cefa234c21865625a6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
g_options.buildPath did not have native separators. This caused
INSTALL_ROOT to not have native path separators, which again made
'mingw32-make check' fail to deploy the .apk. (The actual failure was that
mkdir failed because it did not accept paths with forward-slashes, so the
install_target rule failed. For the record, the command of that rule had
the following call to mkdir:
mkdir $(INSTALL_ROOT:@msyshack@%=%)\libs\x86
Change-Id: Id792c36986b52a527546d48aa9f7d9587e7a18d9
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
- Use member initialization
- Introduce nullptr
- Use auto where applicable
- Use range-based for
Task-number: QTBUG-76493
Change-Id: Ic4dbee2d76a65be1f8a4c25f4ca7e4f032443579
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Varying versions of the library may be available depending on build tool
chain or Windows version. Try to dynamically resolve the D3DCompile
function.
Fixes: QTBUG-76845
Change-Id: Ib7eb3b8c454e9c25731eb2ba9ba45e54fe3f1283
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This is in preparation of deprecating QLinkedList.
Most is straight-forward, except where operator+ was used on linked-list
iterators. In one case, replaced this with std::next, in the other, with
prefix increments, since the advancement was always equal to the loop
control variable. Since advancing a linked-list iterator is a linear
operation, this removes a source of quadratic complexity.
Another obstacle was the overloaded op< set, which was in the Qt namespace
while the iterator is from std and the payload, as before, was global.
This breaks ADL, so move these operators to namespace std. This violates
the standard, but the functions are tagged with our distinct types, so it
shouldn't cause any trouble.
Change-Id: Ifec0a927bfdabb002838cdf86fb8d23b32a38ff7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This class was introduced to modify the hook handling of
QWindowsGuiEventDispatcher. As the hook handling code is removed now, we
can remove QWindowsDirect2DEventDispatcher entirely.
Change-Id: I56491a67f163784f43b1025225e536d386cead1d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calling waitFor{ReadyRead,Disconnected} it will wait for data but
if the data is already received and the read notification has been
queued (and there's no more data coming in) it will return false.
By checking if a read notification has been queued and then handling
this we can easily take care of this scenario.
Fixes some flaky tests which missed the read data in waitForDisconnect
and similar.
Fixes: QTBUG-38385
Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If we end up in the connected state then we should pass on any
remaining data immediately instead of waiting until the next time we get
a read notification.
The other `case`s in the switch might be able to do something similar,
but I don't want to introduce that logic now in case it breaks something
else, the Connected branch is small and simple to deal with.
Should severely reduce flakiness with socks proxy in CI under pressure.
Task-number: QTBUG-76367
Change-Id: I0965d4c62a29a25ce6b8dd60862a464279aef0b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
The main goal of this patch was to port away from Java-style
iterators, to make QtBase QT_NO_JAVA_STYLE_ITERATORS-clean. And this
the patch achieves.
But I couldn't resist a few drive-by fixes, too, to wit:
- Use qDeleteAll() instead of while(!isEmpty()) delete takeFirst()
- Use QMap::last() instead of iterating to the end, remembering the
last-seen value
- Use QMap::contains() instead of QMap::keys().contains()
- Use qExchange() instead of copy+clear
- Make some functions const (requires the mutex member to be marked as
mutable, which is common for mutex members)
I am almost certain that getSsidFromNetworkName() cannot work correctly.
But this patch does not attempt to change the algorithm.
Change-Id: Ifa04d7837bdc0837036c3a7a73f8c51f4e681f42
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since commit 6a7cea64 qt_GetMessageHook is effectively a no-op, and
we can remove the complete hook handling code.
Change-Id: I90383c0c09c2b0f1d715872de5f9519a879d9bae
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
