It does not work as expected since the QLineEdits do not expand.
Amends b880b7e1ac.
Change-Id: I0b3b3822cca7fc6442a7155eecd46bd3d134d069
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
In the gray antialiasing code path for text on Windows, we
check whether Cleartype is enabled in the system and,
if it is, we forcibly enable gray antialiasing instead. But in
this logic we did not consider the case where antialiasing
is turned off entirely, i.e. when the style strategy is
QFont::NoAntialias. We should never override
no-antialias with antialias.
[ChangeLog][Windows][Text] Made it possible to disable
antialiasing for text when drawing into images.
Task-number: QTBUG-47141
Change-Id: Ieb2beba8c2d02295abe6d9a98d2e63a2d39c9e6a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If a menu is added to the tray icon after the icon itself has been registered,
we need to register the menu properly.
Change-Id: I19a6d78848142d66c2cd882746d8d55c0b9a2818
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This method can be called for a submenu after it's called for the top-level
menu, and we should not replace it with a submenu.
Change-Id: I8e180ee074287cfcdc76dfe77c6c7aa7d5891741
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
* Transfer propertiesUpdated and updated signals from submenus to parent
menus. Without this, the adaptor only receives this signal from top-level
menu items, and doesn't receive it from items of submenus. Connect to
these signals when a menu item is added or synced, and disconnect when it
is removed.
* Make QDBusPlatformMenus use IDs of items containing them, not their own
IDs (own IDs do not make any sense since they are not exported over D-Bus).
* Store toplevel menus per-adaptor, to make it possible to export multiple
menus (for example a menubar and a tray icon menu).
* Adjust the QDBusMenuLayoutItem::populate methods to always get the menu
via its containing item and to populate the menus recursively.
* Map D-Bus menu AboutToShow method to platform menu aboutToShow method,
and map hovered and closed events to hovered and aboutToHide signals.
(QTBUG-46293)
* Always set the visible property on item. Otherwise, when an item becomes
visible, the D-Bus menu still thinks it's invisible because that property
was not changed back to true. (QTBUG-48647)
* Call emitUpdated from insertMenuItem and removeMenuItem methods, as they
really update layout. Do not call it from syncMenuItem, it changes only
properties but not the layout.
* Start revision numbering with 1, because libdbusmenu-based hosts ignore
updated signal with revision=1.
Task-number: QTBUG-46293
Task-number: QTBUG-48647
Change-Id: Icf713405db0443e25462c1a19046df7689fe5e78
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
It's used as a global static but according to library policy it's required
to have a trivial dtor and a trivial or constexpr ctor, otherwise it
runs code at library load/unload.
Change-Id: I1fcea3ce388b2a198e3851e6d0aeb91ae0a8e4b1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Consider a window which was hidden and shown with hide() and show()
methods and mouse pointer was in window when hide() was called.
At first, window got focusOutEvent and then Qt library sends X server
a message to unmap the window.
Then X server will send client two messages:
1) FocusOut(10) detail=Nonlinear(0x03)
2) FocusIn(9) detail=Pointer(0x05)
QXcbWindow has a logic for not seting active window to 0 if there is
a FocusIn coming (see QXcbWindow::doFocusOut).
So QGuiApplicationPrivate::focus_window still points to the current
window.
Then when show() is called, qt compares previous focus with new focus
and, since they are equal, doesn't do anything. Event focusInEvent
isn't delivered to the window.
Here are two links why X server sends FocusIn just after FocusOut:
http://lists.freedesktop.org/archives/xorg/2008-December/041684.htmlhttps://tronche.com/gui/x/xlib/events/input-focus/normal-and-grabbed.html
Proposed fix ignores FocusIn events with detail==Pointer.
The text of explaining comment is taken from the Chromium project:
https://chromium.googlesource.com/chromium/src/+/master/ui/views/widget/desktop_aura/x11_desktop_handler.cc
from X11DesktopHandler::ProcessXEvent function.
[ChangeLog][module][Linux/XCB] Fix not delivering focusIn event on
hide/show with XCB
Task-number: QTBUG-49071
Change-Id: I433c8b638834c25f113cc134ee4185778c44f540
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This patch fixes cursor shape when mouse leaves the window and enters
the window again with pressed mouse button - ignore the mouse enter
and leave event when any of mouse buttons is pressed.
Task-number: QTBUG-46576
Change-Id: Id6ce50cd0d66da51a251d4811bc42cd31606de29
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Added enter/leave event handling in XInput2 to avoid problems with
those events when the mouse is grabbed.
This commit amends: 53d289ec4c
This commit amends: ed2e157803
Task-number: QTBUG-50340
Change-Id: I7a120b46daa4f8fa4c218346273ae90b6abfa156
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
-ldl option was used unconditionally while libdl is not supported
when libc is static.
Add build test to configure which checks if libdl is supported.
QMAKE_LIBS_DYNLOAD in "src/corelib/plugin/plugin.pri" is now used only
if libdl is available.
qt_linux_find_symbol_sys from qlibrary_unix is now used only if
QT_NO_DYNAMIC_LIBRARY is not defined.
Initially reported by Buildroot autobuilder here:
http://autobuild.buildroot.net/results/a85/a85a1839a45fb6102e53131ecc8f6dadf92bcdc2
Change-Id: I0397472456efdc4f3ab5f24d01253bee8048a9d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In a case of having a non English system locale, then the face and name of
the font may be localized but will not match up what is in the registry.
Therefore we need to try with the English name if is possible that there
is one, so in the case of when registerAlias is false we should try to get
the English name if necessary.
Change-Id: Id1064b6f5263677320374dbddfad852f30f041c5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
This fixes the crash introduced by
75b705fec8. The drag only needs to be ended
on the hide if it is actually in the middle of dragging. This enables the
case of dragging the dock widget out with the mouse to continue to work.
Task-number: QTBUG-50890
Change-Id: I72309dd40ee670319f2ff607ae201c46f8de4652
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Set the right sub role (NSAccessibilitySecureTextFieldSubrole) and
return the bullet point character for the text contents. This alignes
the behavior with native widgets.
Change-Id: I7305e08dca61097dd8c050aed64c792c06de0a4d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
accessible\iaccessible2.cpp(1708,40) : warning: comparison of two values with different enumeration types ('IA2Role' and 'QAccessible::Role') [-Wenum-compare]
Q_STATIC_ASSERT(IA2_ROLE_COLOR_CHOOSER == QAccessible::ColorChooser);
Task-number: QTBUG-50804
Change-Id: I25a1f00fdbd687ff23f875542a6aa0cc0cab3d23
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
The enum needed a name to make that possible, of course.
The one overt int return -1 needed to be made explicitly Neither, too.
Change-Id: I3930bf03a7ee5e1619a1c74f9ca54faf6a6c5b2f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If argumentTypes is NULL then it is indeed not equal to the address of
a local static variable, so there is no need to follow the NULL-check
with a check that it's not equal to that non-NULL address.
Change-Id: I62362db747c0620b2195f7997368f026f535d57c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
When the window flags are changed for the widget then it is possible to
minimize the dockwidget via the titlebar. This will cause it to be ready
to start a drag internally but since the dockwidget never gets a mouse
release event it doesn't end it. Therefore it ends up being in an invalid
state later on when restored, so the endDrag() needs to happen in the hide
event to ensure this is not an issue later on.
Change-Id: Ia84bee96b9eed49896869e6a15d4de6d01964264
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Normally setting the mode again and again on each application startup
is not desirable as it takes time and considerably affects the application
startup experience.
However, in some cases (like shutting down the X server) the output
gets powered down and there seems to be no way to detect this. Here
setting the mode again becomes necessary. Until there is a better
solution, add an environment variable QT_QPA_EGLFS_ALWAYS_SET_MODE
which, upon a non-zero value, leads to always calling drmModeSetCrtc.
The issue is not specific to Qt, the same is visible with the NV examples
as they try to minimize redundant mode set calls in the same manner.
Change-Id: If2b5e3fda74e077a747dd03cee65c936560a5026
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Similar to the existing methods for QDBusPlatformMenuItem. These methods
will be needed for implementing the D-Bus platform menu bar.
Change-Id: Iae3a5892b71fa9a7c72c323ee4b3ab2afd7d4d76
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Add support for ABS_MT_ORIENTATION value. Linux kernel multi-touch
protocol allows it to be in a wide range:
https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt,
but we need only to know whether the touch point rect is rotated
by 90 degress. So adjust the angle to the closest axis.
Change-Id: Ie20725dc4bef509e2f9b19571efc69502d00c019
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
It's only supposed to be included by clients of the library, and
confuses qmake's dependency resolution into thinking the header-only
features such as qtestkeyboard.h and qtestmouse.h are dependencies
of this source file.
Change-Id: I5fe73b752c1c491ee0088bced77f997696d96c62
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
To calculate the real count we need to use the actual fixed point
increment and can not use the floating point value increment wass based
on since it might round differently.
Includes auto-test by Gabriel de Dietrich.
Task-number: QTBUG-50153
Change-Id: Ia973088f361c90370fa20bac14a4b8f373b5d234
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The name, format and maxChange of a Section depend only on the
section, not on the details of the currently parsed text it matches;
so we don't need the parser object's list of all sections to work them
out. Move these methods to the SectionNode and act directly on that
instead of going via the section list.
Make the name take a Section enum instead of an int.
Likewise, make stateName take a State enum instead of an int.
Change-Id: Ie340d042ab95aec517013c4dcc30901d40305c78
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The actual section members grew up to the internal value, leading to
interleaving of subsequently-added values. Change existing enum
values to make this go away (class is private, so no BC constraint
forbids this).
Change-Id: If266b557817eae19d375519bf38268f0f2a0d372
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
One #if...#endif started in one function's body and ended in
another's, which is worth remarking on in comments at both ends.
A later #if...#else... opened blocks in both halves, that were closed
just after their #endif, leading to simplistic brace-matching failure;
so move that closing brace to inside both halves, so each half is
brace-balanced and the function, as a whole, brace-balances simply.
Commented on each #endif that was distant from its #if.
Change-Id: I74d97b6dc4b291ec05053d299077a61cecf41ca1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Generate the qundo*.qm files for tst_QUndo*::commandTextFormat() in
the current directory (out of source, for a shadow build) rather than
alongside the qundo*.ts from which they're derived (in the source
tree); and remove them once loaded, if that succeeds. (On failure, we
might even want to look at them.)
Task-number: QTBUG-49081
Change-Id: I666985fa3ceb8c25c917b617d6d39141eddebb76
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
To do that, split out and export a QKeySequencePrivate::keyName() function
that returns the key text representation without the modifiers.
The implementation is compatible with libdbusmenu-qt.
Change-Id: Ibc3190a3949813a1610728cf89574027e5d2778d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Rename TestWidget to PaintTestWidget, because this class tests only
whether paint event occurs.
Remove unused variables.
Remove reset() method, because there is no need to reset only one
variable in class method.
Change-Id: I8f442c73598e3431baf2b0433fefc157d3f10ea6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This warning was a good idea when the plugins were needed to give a hint
where to start debugging. Now the a11y plugins were merged into
qtwidgets/qtquick, so there is no more need for this warning which may
pop up on custom widgets e.g. inheriting QWindow.
Task-number: QTBUG-50215
Change-Id: Ic5efbb3dfbd07a7139884126a2604b54c99005e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
This solves an instance where restoreState() was used when the
dockwidget was already floating and the saved state was also for
a floating dockwidget.
Change-Id: I1fe764ae2a6b0351ae26e33ffec682ad37c944d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The QKeySequence test no longer uses private members (since commit
725bdc3fd2), so that is no longer needed.
Also, remove the unused include from the test.
Change-Id: I4d252bb3efd7282f74c44e48444c23ab51d48ea5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This reverts commit 4c71db7567.
It's too risky for 5.6, we should let it cook in dev for a while
and backport when ready.
Change-Id: I91e677e65d967f29c84a254cd3dffc8bb847b263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
These are "special" XCB_NOTIFY_MODE_(UN)GRAB
Enter/Leave events and we do not have handlers for
them in Qt, so lets just ignore events with this mode.
Patch fixes Qt+ArchLinux+Awesome WM issues, where Qt
applications were receiving Enter/Leave events for
mouse clicks in the application window.
This patch does not affect "normal" XCB_NOTIFY_MODE_NORMAL
Enter/Leave event handling.
Task-number: QTBUG-45818
Change-Id: Ib70fdd9ed9200364a9753904f8e63d1ed9e2072f
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The memory should be allocated only if we operates on a valid type,
It is a regression introduced by 3d575d4845
Change-Id: Ia31bccd5b41fe090c29df1aeaa69efb706cd25bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason why they should be disabled, and also the current behavior
breaks the D-Bus platform menu bar implementation.
Change-Id: I8a8b5b6a66e40f1f1a25394dc87ac2178c7907fa
Reviewed-by: Martin Klapetek <mklapetek@kde.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
