We didn't do it in Qt 5 times and it was accidentally done for Qt 6.
There's no reason to generate them, the .pri files are only meant to
be used for regular plugins so a project can do QTPLUGINS += foo.
That mechanism is not needed for qml plugins which use
qmlimportscanner instead.
Furthermore the pri contents didn't contain a class name, so they
couldn't be used anyway.
Pick-to: 6.2
Change-Id: I6299fda21ece0f693a817ab558b45aa46b97e5ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove target specific flags from static_link_order.
Move the check to the common config.tests folder.
Amends 5fb99e3860
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: I1368075ec6bd1e743b2b89fd93143df38a278ec2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only depend on the ${project}_src and ${project}_tools targets.
This might exclude some non-obivous target dependencies, but we can
adjust that if needed.
This reduces the build.ninja file of qtbase + qtsvg form 341MB
to 41MB when configuring with tests and examples, as well as reduces
the processing time of calling ninja.
Amends d97fd7af2b
Pick-to: 6.2
Change-Id: I2860d8ae89728f33f6b73fede1335cd6d6290f78
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For user projects we run the static link order check once
'find_package(Qt6 ...)' is called.
If linker can resolve circular dependencies between static libraries
and object files we set the _qt_link_order_matters property of the
Qt::Platform target. This indicates the use of finalizers is not
required and we may rely on CMake-base propagation of resource
libraries and resource object files.
If linker could not resolve circular dependencies depending on
the _qt_resource_objects_finalizer_mode value:
- Finalizer will be called and collected resource objects will be
linked to the target directly.
- Finalizer will be omitted and resource objects will be linked
using the target_sources function implicitly. This only
propagates resource one level up if consumer links the static
library PUBLICly, but all symbols will be resolved correctly
since object files are placed in the beginning of the linker line.
In the CMake version 3.21 we expect that CMake will take care about
the order of the resource object files in a linker line, it's
expected that all object files are located at the beginning of the
linker line.
TODO: Need to confirm that the CMake 3.21 meets the expectations.
Amends 4e901a2f99
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: Ia68976df8182d3d3007b90c475c1e3928a305339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.21 introduced a new IMPORTED_TARGETS directory property which
we can use to promote all imported targets within a scope to be
global.
This would cover transitive non-Qt imported targets which the Qt build
system does not know about and is thus a more complete solution
compared to promoting only Qt targets.
Run a finalizer at the end of the directory scope where
find_package(Qt6) is called to promote all imported targets within
that scope to global (when requested).
The old promotion method is disabled when the CMake version is new
enough.
Pick-to: 6.2
Task-number: QTBUG-92878
Task-number: QTBUG-94528
Change-Id: I533a3bd4186eba652f878ddd72c76118c2fd8bae
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
User projects can set the QT_PROMOTE_TO_GLOBAL_TARGETS variable to
true so that the various imported targets created by find_package(Qt6)
are promoted to global targets.
This would allow a project to find Qt packages in a subdirectory scope
while using those Qt targets from a different scope.
E.g. it fixes errors like
CMake Error at CMakeLists.txt:5 (target_link_libraries):
Error evaluating generator expression:
$<TARGET_OBJECTS:Qt6::Widgets_resources_1>
Objects of target "Qt6::Widgets_resources_1" referenced but no such
target exists.
when trying to use a static Qt from a sibling scope.
Various 3rd party dependency targets (like Atomic or ZLIB) are not
made global due to limitations in CMake, but as long as those targets
are not mentioned directly, it shouldn't cause issues.
The targets are made global in the generated
QtFooAdditionalTargetInfo.cmake file.
To ensure that resource object libraries promoted, the generation
of the file has to be done at the end of the defining scope
where qt_internal_export_additional_targets_file is called,
which is achieved with a deferred finalizer.
Replaced all occurrences of target promotion with a helper function
which allows tracing of all promoted targets by specifying
--log-level=debug to CMake.
Pick-to: 6.2
Fixes: QTBUG-92878
Change-Id: Ic4ec03b0bc383d7e591a58c520c3974fbea746d2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Automatically set compilers based on old mkspec style target
Pick-to: 6.2
Change-Id: I80404376964a85c6b519657c054d008da47aed91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change allows temporarily removing the EXTERNAL_BUILD option in
a qt repo examples project to check how the examples behave in a
non-external project build, without forcing the developer to use a
prefix build.
Useful to compare behavior until we've ported over prefix builds to
use EXTERNAL_BUILD.
Amends d97fd7af2b
Change-Id: I29b834bb5f00e1e93966caae6f816faedba76b76
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This makes qt_internal_disable_find_package_global_promotion available,
which is needed when linking against QtMultimedia in a static build
Pick-to: 6.2
Change-Id: I9b8f6d7b74a8693ac471f8a280e893f4da80a44b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Removing flags based on REGEX may include spaces, so flags might be
glued. Replace flags with spaces to keep at least one space for
the described case.
Pick-to: 6.2 6.1
Fixes: QTBUG-94400
Change-Id: Ice268da36174ef5cf4398d2aee8fcd4731336316
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add 'Private' suffix to the internal module names in the mappings of
the qmake files for modules of the qtdeclarative repo.
Change-Id: I1592ebad0f0db553322ea766561b1b8c3fd38aea
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
'ld' only capable to resolve circular dependencies by wrapping the
suspected static libraries and objects using --start/end-group
arguments. We want to detect if linker is 'ld' at configure time to
decide how to link the resource objects if finalizers are not enabled.
The qt_config_compile_test function is extended with an extra argument
since it's required to pass custom cmake flags to the ld-related test.
Pick-to: 6.2
Change-Id: I484fcc99e2886952d8b0232f37e4e6a35d072931
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This means calling 'ninja apk' in a Qt build with examples configured
will build all example apks, regardless of whether the examples are
built as external projects or in-tree.
Fixes: QTBUG-94264
Change-Id: I5c7af0354858898a2e154a6d54fb025e4d81ff80
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
qmake had support for building with clang-cl as the win32-clang-msvc mkspec.
Task-number: QTBUG-89642
Task-number: QTBUG-88081
Change-Id: I0709c289f90fedb121620d1e67ef841602219816
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All repositories define QT_NO_INTERNAL_COMPATIBILITY_FUNCTIONS by now,
and we can remove QtCompatibilityHelpers.cmake altogether.
Change-Id: I4d8104246e96a4514d5651c104607d651d208d95
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add FindWrapSystemMd4c.cmake so that the old md4c target can be used
as well as the new one and set WrapSystemMd4c_FOUND.
Link to the imported target WrapSystemMd4c::WrapSystemMd4c if the
system library is used.
Add qt_find_package line to find the package in configure.cmake.
Fix the condition for enabling system-textmarkdownreader, it includes
testing for textmarkdownreader because even if the code would compile
correctly without it, it looks strange when the output says
"textmarkdownreader no" and under "using system libmd4c yes" even if
libmd4c is not used.
Use system include when system-markdownreader is enabled.
Add library mapping for libmd4c.
Change-Id: Id5d5b13d6691a8c1cdf627238887977c847c1e67
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move collected resource objects to the beginning of the linker line to
prevent order-related issues.
Fixes: QTBUG-92250
Change-Id: Ia046f2820feb693bfadc2b60e07fa001638d4d7b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qtattributionsscanner is now found in libexec.
Task-number: QTBUG-88791
Change-Id: Ie704663012be92b0c223d9d57210ec1874abff0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For Apple's frameworks it's possible to include header files using the
following assumption:
If the framework name is "MyFramework" then
'#include <MyFramework/frameworkheader.h>' will work without specifying
the include path explicitly. This is broken for internal modules since
they use the framework name with the 'Private' suffix.
This uses the module name instead of the target name as a framework
name.
Amends edbe0eb335
Task-number: QTBUG-87775
Change-Id: I0592a28d0768724b6e10ca81aa7cefb0a3699a5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Resource objects might be linked to plugins. Since some plugins may
be present in LINK_LIBRARIES as the complex genexes, need to collect
them explicitly and iterate over plugin targets to find resource object
libraries that need to be exposed to end-point target executable.
Amends a1fd4f51ad
Change-Id: Icd85f54f7bf9d1b7e3382caa5d9aa62449b6adb8
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before, it would erroneously look for them in the source directory.
Change-Id: I6dcd3ccde3e57dba84639da2cd354c51e8a92459
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In MSVC static build, if we build Qt with 3rdparty library (e.g. zstd),
cmake will add"zstd" (without "-l" prefix) to Qt6Core.prl. Then we
use this Qt to build a qmake project, compilation will fail due to
missing zstd.obj. Without "-l" prefix, qmake will treat "zstd" as an
object file instead of a library.
Library names in qt_module.pri and qt_lib_*_private.pri are also
missing "-l" prefix.
This is because on most compilers, CMAKE_LINK_LIBRARY_FLAG equals
"-l". But on MSVC, it is an empty string. So we should pass
"-DLINK_LIBRARY_FLAG=-l" for MSVC.
Also add "-L/path/to/library" if the library path is not in default
linker search directories. This will write un-relocatable paths to prl
files only when using 3rdparty libraries to build Qt statically. Usually
it's not a problem.
In addition, CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES is also empty on
MSVC. So The third argument of "$<FILTER>" is empty, it is an invalid
generator expression. This means no include dir will be written to
qt_module.pri and qt_lib_*_private.pri on MSVC. So only use "$<FILTER>"
when CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES is not empty.
Pick-to: 6.1
Change-Id: Ib66f95dc09cf920363a4b9338fb97747dd2f8ab7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...and make it consistent with that of qt_internal_add_module.
Make EXTRA_CMAKE_FILES a multi value keyword.
Do not add include statements for every file in EXTRA_CMAKE_FILES.
Add the EXTRA_CMAKE_INCLUDES argument to specify includes.
This enables us to specify EXTRA_CMAKE_FILE that are not included.
Change-Id: I1a3667473b94ee44363b554ab9e6c380e5c11389
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Linux packages, we pass OpenGL_GL_PREFERENCE=LEGACY when
building qtbase. This is done to link against legacy OpenGL libs.
When building non-qtbase repos, we also need to set this variable to the
same value we have in qtbase.
Pick-to: 6.1
Task-number: QTBUG-89754
Fixes: QTBUG-94040
Change-Id: I567b629d245025d2b1544b91cfc265a9c921725f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid getting the LINK_LIBRARY property of the interface libraries
when calling a resource object finalizer.
Amends a1fd4f51ad
Change-Id: I19d625a927c66994902f5c89e6c82183c94af91e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Versioned tool targets are always promoted to global targets.
Versionless ones were not promoted to global targets.
This was an oversight which caused issues with conditions like
if(TARGET Qt::Tool) in top-level builds.
Fixes: QTBUG-93839
Change-Id: I5176899b5d0d80bfd0b350bc9c4b3fa5b53c0777
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the future it might be useful to print the config summary entries
of a Qt module configure.cmake file even if the associated module
is not built and thus qt_feature_module_begin is not called.
The repo src/CMakeLists.txt could then use a combination of
qt_feature_evaluate_features and a conditional
qt_feature_record_summary_entries to ensure the that summary entries
are still shown.
Change-Id: I124efc82163ddae48d9e72c70a677ec4c6588fac
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since the information about framework is performed in multiple places
it's quite hard to control its consistency. This moves the obtaining
of framework related information to the common function and adjusts
the use of the information across the repo.
Change-Id: I1f488d41dcea75a1e8c361926792a6b7c45e5a3f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the previous implementation of the resource object finalizer, we
used the name of the resource object library without namespaces when
recording it in the resource libraries list. This causes an issue when
we or users export resource targets.
This approach marks resource object libraries with the exporting
property instead of collecting resource targets when creating them.
Amends 19e789bace
Change-Id: I8596815921f2c681ddd78d9b2e9a4e1cafe5000b
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This proposal collects all the resource objects to the qt-specific
property of the static libraries. This is done to avoid littering
of other static libraries and put resource object files to the
source part of the linker line when linking the end-point
executable.
The way we link object resource libraries is changed back to the
target_link_libraries approach as we may omit using finalizers
with linkers other than ld. Users may enforce finalizers by calling
the qt6_enable_resource_objects_finalizer_mode function if need.
Refactor tests related to the static resources.
Amends ddaa7150d8
Task-number: QTBUG-93002
Change-Id: I74135e291cd82fb54d1b284b4b4a1e002b1fef98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only use plugin finalizer mode if qt_finalize_target is called at the
end of the user project (which we can't really check, the user has to
ensure that) or when qt_finalize_target is automatically defer-called
by CMake 3.19+ (which is done by qt_add_executable).
This removes the previous behavior of using the finalizer mode if
qt_import_plugins is called. Instead the old regular mode is used
if the above preconditions are not met.
The removed behavior had ordering issues if qt_import_plugins was called
before target_link_libraries. The dependency walking would be done
before Qt dependencies were added and thus no plugins would be
linked.
Amends 6fcc272ac9
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Task-number: QTBUG-94030
Change-Id: I78702b653a35596f5581c2f4282b2336f0124e60
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
fix debugging demangler
Emscripten apparently does not like the quotes in the compiler argument
and remove array syntax
Change-Id: I66652f6bdc5872faf540a877ca01bf75dde47bbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Examples are intended to show how to build against an installed Qt.
Building them as part of the main build means the way the Qt targets
are defined and created are not representative of an end user's build.
By building them as separate projects using ExternalProject, we can
more closely replicate the intended audience's environment. This
should allow us to catch more problems earlier.
Having examples built as part of the main build also creates problems
with some static builds where a tool built by the main build is needed
during configure time. This happens with other repos like qtdeclarative
but not (currently) with qtbase. Converting the examples in qtbase to
be built using ExternalProject is intended as a demonstrator for how
other repos can do similar. Until other repos are converted, they will
continue to work as they did before, with examples as part of the main
build for non-static builds only.
The new build-externally behavior is only supported for non-prefix
builds with this change. Prefix builds will continue to use the old
non-external method. Support for building examples externally in
prefix builds will be a separate change.
Task-number: QTBUG-90820
Fixes: QTBUG-91068
Change-Id: I2304329940568dbdb7da18d54d5595ea7d8668bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It was copy-pasted (presumably from plugin handling code)
when initially introduced but was never used.
Change-Id: I571738b9f5269ca038f5931a773aa5c2c66aafbc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Internally it uses a new _qt_internal_add_library function (similar
how we have qt_add_executable and _qt_internal_add_executable) as well
as finalizer code line the executable case.
_qt_internal_add_library forwards arguments to add_library with some
Qt specific adjustments to the selected default target type (based on
whether Qt is configured as static or shared).
The new _qt_internal_add_library is now used in qt_add_plugin as well
as some internal library creating functions like
qt_internal_add_module.
This reduces some duplication of file name adjustments across
functions and creates a central point for creation of Qt-like
libraries (for some definition of Qt-like).
Change-Id: Id9a31fe6bf278c8c3bb1e61e00a9febf7f1a2664
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Since we add 3rdparty libraries to the set of the Qt modules, they are
treated as the Qt modules by the depenedcy helper as well. So give them
_qt_module_interface_name to fix dependency helper.
Amends 425ff34aa1
Change-Id: I5898c1c90156de1878aeeef5a0924349b44c50fa
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We need to export the Private targets of the internal modules to keep
compatibility with existing internal module users across repositories.
Amends 425ff34aa1
Fixes: QTBUG-93943
Change-Id: I10234cec1eb618b69d041f80fbe29620a4e307b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After discussion we decided to opt-out the UNICODE definintion
behavior. To disable UNICODE in user projects the
qt6_disable_unicode_defines function could be used.
Amends 5b64e5950c
[ChangeLog][CMake] Enables the UNICODE and _UNICODE definitions on
WIN32 platforms by default for all cmake projects to reflect the
qmake behavior. Use qt6_disable_unicode_defines function to disable
the default unicode definitions.
Pick-to: 6.1
Fixes: QTBUG-93895
Change-Id: Id70ff7dcf8c74f660ec851f8b950e1e3b94d9fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
HEADER_MODULEs use the INTERFACE visibility to link libraries. This
causes a transitional propagating of the Qt-internal compile definitions
and options to the user targets.
This commit avoids an implicit adding of the Qt::PlatformModuleInternal
library to the HEADER_MODULEs and stops propagation of the Qt-internal
compile definitions and options. If module wants the transitional
propagation of some properties, this needs to be done explicitly.
Amends 8b7894cb63
Pick-to: 6.1
Fixes: QTBUG-89951
Change-Id: Ia9cecc38bac98eb5bc6e47d288308b49813ab5ac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cmake, targets are used as an entity for modules. This causes a
number of problems when we want to manipulate a module as a separate
entity with properties associated with it.
The _qt_internal_module_interface_name target property is introduced to
represent the module entity. All modules write a name to this property,
which will subsequently expand into the module name matched with
the module name in qmake.
The 'qt_internal_module_info' function is responsible for providing the
correct values for the module properties used when working with a module
target.
Unlike qmake, for internal modules in cmake it is expected that the
Private suffix will be specified explicitly. In case the user wants to
have a different module name, an additional argument
MODULE_INTERFACE_NAME of the qt_internal_add_module function is
introduced.
This also changes the way how target dependencies are collected and
resolved. Since the 'Private' suffix no longer means an unique
identifier of the module 'Private' part, we look for the both Private
and non-Private package names when resolving dependencies.
TODO: This change doesn't affect the existing internal modules, so to
keep compatibility with the existing code the existing internal modules
create 'Private' aliases. The code that provides backward compatibility
must be removed once all internal modules will get the proper names.
Taks-number: QTBUG-87775
Change-Id: Ib4f28341506fb2e73eee960a709e24c42bbcd5ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the concept of repository target sets, which is a named set of
targets within a Qt module repository.
In a Qt repository, a repo target set 'qtfoo' can be defined in the
top-level project file with
qt_internal_define_repo_target_set(qtfoo DEPENDS Bar Baz)
The DEPENDS argument specifies Qt components that need to be
find_package'd when building the targets that belong to qtfoo.
In subdirectory project files, use
qt_internal_include_in_repo_target_set(qtfoo) to mark the file as
belonging to the repo target set.
To build and install a single repo target set, specify
QT_BUILD_SINGLE_REPO_TARGET_SET=qtfoo when configuring the Qt
repository.
Change-Id: Ic9e6213e3225988fd561f315bc857ee44ff17420
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow linking all plugin initializer object libraries directly
into the final target (executable or shared library).
The finalizer mode is triggered when the project adds a call
to qt_import_plugins, as well when the project has an explicit
call to qt_finalize_executable or when it is defer called by
CMake 3.19+.
Otherwise the old non-finalizer mode is used, where each plugin
initializer object library is propagated via the usage
requirements of its associated module.
A user can explicitly opt in or out of the new mode by calling
qt_enable_import_plugins_finalizer_mode(target TRUE/FALSE)
The implementation, at configure time, recursively collects all
dependencies of the target to extract a list of used Qt modules.
From each module we extract its list of associated plugins and
their genex conditions. These genexes are used to conditionally
link the plugins and the initializers.
Renamed QT_PLUGINS property to _qt_plugins, so we can safely query the
property even on INTERFACE libraries with lower CMake versions.
QT_PLUGINS is kept for backwards compatibility with projects already
using it, but should be removed in Qt 7.
The upside of the finalizer mode is that it avoids creating link
cycles (e.g. Gui -> SvgPlugin -> Gui case) which causes CMake to
duplicate the library on the link line, slowing down link time as well
as possibly breaking link order dependencies.
The downside is that finalizer mode can't cope with generator
expressions at the moment. So if a Qt module target is wrapped in a
generator expression, it's plugins will not be detected and thus
linked.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ic40c8ae5807a154ed18fcac18b25f00864c8f143
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Instead of compiling the plugin initializers as part of a user
project, pre-compile them as object libraries while building Qt.
The installed object libraries can then be used with
target_sources(qt_module INTERFACE $<TARGET_OBJECTS:plugin_init>)
so that they are linked into the final executable or shared library
via qt module usage requirement propagation.
This reduces the build times of user projects.
The link line placement of the object files should be correct for all
linux-y linkers because the only dependency for the object files is
Core and the Gui -> plugin -> Gui -> Core cycle does not hamper that
from empirical observations.
As a consequence of the recent change not to link plugin initialization
object files into static libraries, as well not having to compile the
files in user projects, we can get rid of the
_qt_internal_disable_static_default_plugins calls in various places.
A side note.
Consider a user static library (L) that links to a Qt static library
(Gui) which provides plugins (platform plugins).
If there is an executable (E) that links to (L), with no direct
dependency to any other Qt module and the intention is that the
executable will automatically get the platform plugin linked,
then (L) needs to link PUBLIC-ly to (Gui) so that the plugin usage
requirements are propagated successfully.
This is a limitation of using
target_sources(qt_module INTERFACE $<TARGET_OBJECTS:plugin_init>)
which will propagate object files across static libraries only if
qt_module is linked publicly.
One could try to use
target_link_libraries(qt_module
INTERFACE $<TARGET_OBJECTS:plugin_init>)
which preserves the linker arguments across static libs even if
qt_module is linked privately, but unfortunately CMake will lose
dependency information on Core, which means the object files might be
placed in the wrong place on the link line.
As far as I know this is a limitation of CMake that can't be worked
around at the moment.
Note this behavior was present before this change as well.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ia99e8aa3d32d6197cacd6162515ac808f2c6c53f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is to allow other repos like qtdeclarative to more easily pass
through supported arguments to qt_internal_add_module() from their own
functions.
Task-number: QTBUG-88763
Change-Id: I965d593de4c6f9d5295a0d427c32dc3d5b1bb639
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Q_IMPORT_PLUGIN generates a global static symbol that initializes a
plugin. If this symbol is added to a static library and the library
is then linked to an executable, the linker decides that the symbol is
unused (because nothing references it) and discards it.
This means there's no point to compile the Q_IMPORT_PLUGIN containing
files into static libraries.
Change the generator expression we use for plugin propagation via
associated modules to not compile and link the plugin initialization
object file into a static library.
Pick-to: 6.1
Task-number: QTBUG-80863
Change-Id: Ide32c0124c1e313c352a72280ce32ce9fbe8fff1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The option is called QT_CREATE_VERSIONED_HARD_LINK. By default, it
is set to ON. Users can set this option to OFF to disable versioned
hard link.
Pick-to: 6.1
Fixes: QTBUG-93636
Change-Id: I0ffa1ee1c6bae1950df332fcce3152a861b33db0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There was a D missing, we want to set CMAKE_REQUIRED_LIBRARIES
Pick-to: 6.1
Change-Id: I7a76d60480ef7bff439f298fe85614d3b7e3ae88
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow collecting all public dependency CMake targets starting from
a given initial target.
The new mode walks INTERFACE_LINK_LIBRARIES of a shared library
or executable target, as well as the INTERFACE_LINK_LIBRARIES and
LINK_LIBRARIES of a static library target.
Each encountered target (checked with if(TARGET)) is added the output
list.
Note that the private dependencies of a non-static target (like a
shared library or executable) are not walked by the new mode.
Introduce a new function called
__qt_internal_collect_all_target_dependencies which uses the new
mode to collect the full private dependency list of a target.
The final list only contains targets, so no linker flags or file
paths.
This list is useful to do further processing on the targets like
extracting properties from them and running finalizers.
Task-number: QTBUG-92933
Change-Id: I5d96cfa05722d65e2248a344a4f2b0f98a992817
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Needed for the upcoming static plugin mechanism, where we have to
extract the list of Qt module dependencies of a target and then extract
the plugins associated with those modules.
To do that we need to recursively collect the dependencies of a given
target.
Rename the moved functions to contain the __qt_internal prefix.
Also rename the existing QtPublicTargetsHelpers.cmake into
QtPlatformTargetHelpers.cmake to avoid confusion with the newly
introduced QtPublicTargetHelpers.cmake.
Task-number: QTBUG-92933
Change-Id: I48b5b6a8718a3424f59ca60f11fc9e97a809765d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Extract common static plugin handling functionality into a separate
QtPublicPluginHelpers.cmake file which is loaded by the Qt6 package.
Split the code into smaller functions that will be re-used by each
templated QtPlugins.cmake.in file, rather than copy pasting the same
code into each QtFooPlugins.cmake file.
As a drive-by, handle QtFeatures.cmake and QtFeaturesCommon.cmake
as public helper files just like QtPublicPluginHelpers.cmake.
This makes it clearer that the functions are available outside
the internal Qt build and also provides a way for not dumping new
helper functions into Qt6CoreMacros.cmake.
Task-number: QTBUG-92933
Change-Id: Id816ef009b4fac1cd317d3ef23f21b3530028067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use paths configured with QT_ADDITIONAL_PACKAGES_PREFIX_PATH
to search also for the tool packages.
Task-number: QTBUG-93565
Pick-to: 6.1
Change-Id: I611b275dd7c4e7ecceb073d16643cd225bbb21d8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Sometimes projects don't follow the standard directory layout, so they
end up copy-pasting the guts of qt_build_repo and adapting that.
Split the macro into smaller ones so it's easier to reuse.
Change-Id: I8cc72ba2a2eaf58afd44950b3ac78378b7b1fdfd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
list(PREPEND) command was added in CMake 3.15+, but so far we claim
support for CMake 3.14 in user projects.
Use set command instead.
This is not the only place where we use list PREPEND in public API,
but it's the first immediate issue that comes up when using CMake
3.14.
Amends 963017f588
Pick-to: 6.1
Change-Id: I7ba4507fc7da2dc550317848751502b8b46c298c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We want standalone tests added by qt_internal_add_test to be built as
universal executables, so we can build them on an intel machine and
run them on an ARM machine.
But CMake build tests will be built on the final machine that runs the
tests and it might lack a universal SDK. That's why they should be
built only targeting the architecture of the machine they're running
on.
Change the generated qt.tooclhain.cmake file to allow opting in or out
of building projects with the same architectures as Qt was configured
with.
Now standalone tests will be multi-arch, but CMake build tests will be
single-arch.
Amends e379147f95
Task-number: QTBUG-85447
Task-number: QTBUG-87580
Task-number: QTBUG-92933
Change-Id: I41ab047983115f84eb2333cc9ac2d19ca08d621f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The -developer-build had not the desired effect anymore.
That argument must not be hidden from the feature logic.
This amends commit d5c3e1336b.
Change-Id: I96562ea2df43ba7de002e705f28c7cc7edb4a589
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Let -developer-build, -cmake-file-api set up the CMake File API query,
so that the build can be loaded directly into IDE's like Qt Creator.
[ChangeLog][Build System] configure -developer-build now sets up
the CMake File API query, so that a build can be loaded without
reconfiguration into Qt Creator and other IDE's. Pass
-developer-build -no-cmake-file-api to configure to disable this.
Fixes: QTBUG-89487
Change-Id: I69199b8f96da02e42e5610aa6f49881c1582f7da
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
BrotliCommon is a dependency of BrotliDec and BrotliEnc.
amends 5d2da76c1e
Pick-to: 6.1
Change-Id: I7741d417e95737f8caacd01962985a27dbb7514c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Passing this configure argument will generate a JSON file that contains
information about configure options and features.
This file is used by Qt's conan recipes.
Fixes: QTBUG-92082
Change-Id: I2057ec8cbdb0a1ea198d7eeacb45f65bfa862d8a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
file(REAL_PATH) was introduced in CMake 3.19.
Use get_file_name_component(... REALPATH) instead that is available in
older CMake versions.
This amends commit b226e99c71.
Pick-to: 6.1
Change-Id: Ibb28ef757228e1a1176ff70c3ec57b7ca751a636
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The libraries already contain the ABI suffix, and the .prl files should
too. This is a requirement for ABI-stitching of Qt Android builds.
Fixes: QTBUG-90023
Change-Id: Ib2a7b3119ace14c8542242fc45f42648840d053a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clarify that OUT_FILE is not the final .prl anymore and where we get the
path of the final .prl from.
Change-Id: I4563c6ef1026bc0646e3ac9ab2fac49e426ca07f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_TOOL_PATH_SETUP_COMMAND is used in COMMAND list when call
add_custom_command/add_custom_target. This is necessary to setup
the necessary environment for the tool to run correctly. This approach
is weak according to CMake documentation:
"If more than one COMMAND is specified they will be executed in
order, but not necessarily composed into a stateful shell or
batch script."
This change introduces the _qt_internal_wrap_tool_command function
that uses a wrapping script that setups necessary environment for
the tool and runs it in a single shell.
The script is generated by the _qt_generate_tool_command_wrapper
function.
Change-Id: Id5270b91619b607a0c1e3a19b8c706edec43f388
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The qt_internal_module_info function suppose to provide the information
only about the Qt modules. Avoid using it for the tool and extra
package dependencies, since some targets do not always exist, when
function is called.
Add the qt_internal_qtfy_target function to make the prefixed target
names.
Change-Id: Ifa8c61064d9c6c430889f00a4ead304029da711b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... and configuring another repo using qt-configure-module.
It's possible to configure a top-level Qt with a subset of repos and
then afterwards configure additional repos with qt-configure-module.
We didn't define QT_REPO_DEPENDENCIES in that case, which caused all
plugin config files to be loaded on reconfiguration, thus causing
duplicate target errors.
Move the QT_SUPERBUILD check to be done every time in
QtBuildInternals.cmake rather than when configuring qtbase/qt5.
Amends 98e8180e56
Pick-to: 6.1
Fixes: QTBUG-86670
Fixes: QTBUG-91887
Fixes: QTBUG-92578
Change-Id: I975835ffa02f702799a3c9f68a5e059d2763a951
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Packagers usually build Qt per repo, but the documentation must be built
from the full Qt source archive to ensure that inter-repo links are set
up correctly. When building the documentation, it's desirable to avoid
building tools and re-use to tools of an existing Qt build.
One now can do a documentation-only build by configuring Qt like this:
cmake /path/to/Qt/source -GNinja \
-DQT_HOST_PATH=/path/to/Qt/installation
and build the documentation with
ninja docs
To avoid building tools, this patch removes the DEPENDS arguments from
some add_custom_target calls in QtDocsHelpers.cmake and makes another
one conditional. The removed dependencies are added at the end of
qt_internal_add_docs. Adding of tool dependencies is not done if
QT_HOST_PATH is set.
Fixes: QTBUG-88441
Change-Id: I3b7a908e22d252d2edcdc1dd522a78b8ad6c487e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's necessary to have versioned alias of the Platform target to use
versioned target in the installable cmake files.
Pick-to: 6.1
Change-Id: I79286e1c0642068bdfa5d24c1087ee0c39e48f1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a Qt module with qt-configure-module, we want to use
the same CMake generator that was used for building qtbase.
That generator is encoded in qt-cmake-private. But qt-configure-module
overrides the generator after trying to detect what generator should be
used. That auto-detection is only useful for qtbase-builds and top-level
builds. Turn it off for repo builds other than qtbase.
Pick-to: 6.1
Fixes: QTBUG-91405
Change-Id: I07efb4afb51ba69d2f5467d272118fa51637ab54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's important for conan CI builds where the correct installation
location of Qt should be used when configuring standalone tests.
Task-number: QTBUG-93037
Change-Id: I2465a439aea6826dedfb3217d1c909ad639d4ac0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously, in a top-level build we always generated the final prl
file somewhere under QT_BUILD_DIR (which is qtbase_build_dir). After
each repo was processed by QtPostProcess.cmake, we installed the prl
files found in PROJECT_BINARY_DIR.
For qtquickcontrols2 this meant that qml plugin prl files were placed
under qtbase/qml, but we tried installing the prl files from
qtquickcontrols2/qml, which didn't have any prl files.
In a static Qt build, qmake's qt.prf calls qmlimportscanner to
identify which plugins should be linked to the executable. This worked
fine because the plugin .pri files were installed correctly.
None of the qml plugin library dependencies were linked in though.
This is supposed to happen in qmake's C++ code where it tries to
find the associated prl file of a linked library in order to extract
all its dependencies. Because no prl file was found, linking failed
with multiple undefined symbols.
Fix this by installing the prl files from QT_BUILD_DIR rather than
PROJECT_BINARY_DIR.
Note that this will create multiple install rules for certain files,
but it's harmless. An example is imageformats.
We process qtbase plugins, see qjpeg, issue an install rule from under
the qtbase/plugins/imageformats folder. We then process
qtimageformats plugins, see webp, issue another install rule from
under qtbase/plugins/imageformats.
The first install rule will install both qjpeg and qwebp, the second
install rule will merely say all plugins are up-to-date.
Pick-to: 6.1 6.0
Change-Id: I8a4bb67bfafc1d016eab62f4fe66b6ba378ceeb2
Fixes: QTBUG-93021
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Passing Android-related variables to the initial CMake call would have
no effect if no (or an empty) value of CMAKE_TOOLCHAIN_FILE was
specified. To alleviate user confusion, yield an error if an Android
build was apparantly requested, but the toolchain file is missing.
Change-Id: I28ec94eabe436d4b9b410b48c7cad1b48d3e1bec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before, we relied on the deprecated "ndk-bundle" subdirectory being
present in the SDK root. Now, we choose the NDK with the latest version
in the SDK's ndk subdirectory.
Pick-to: 6.1
Fixes: QTBUG-87579
Change-Id: I37a9e03184f4518b4074d55375af08209591de94
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When ANDROID_NDK_ROOT is explicitly set by the user, there's no point in
detecting the NDK. The detection had no effect, because the already set
ANDROID_NDK_ROOT variable would not be overwritten by our set call.
Fix the condition of the check: There is no CMAKE_ANDROID_NDK_ROOT
variable.
Pick-to: 6.1
Change-Id: I8f0d4f2a1a67445f67a79c7d2d0932099828b05e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's needed in qtconnectivity, but currently the
qt_disable_apple_app_extension_api_only function is defined in
QtInternalTargets.cmake which is loaded only in qtbase.
Move the function to cmake/QtTargetHelpers.cmake.
Amends e189126f1a
Pick-to: 6.1
Change-Id: Ia2470e48a91385239394368780f5bbb223000113
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When cross compiling from a case sensitive file system, casing
matters, and mingw headers and import libraries consistently
use lowercase.
This was uncovered by d385158d5213ef568b7629e2aa4a818016bbffac;
prior to that, the schannel TLS plugin didn't end up built (at
least when cross compiling).
Fix other similar cases that can be found by grepping the repo.
Change-Id: Ia696e17b7aaa979d7b7f5b0801383f338a8b585b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently in order to compile a Qt6 test standalone one needs to use
the qt-cmake-standalone-test script which will load the
Qt6BuildInternals/QtStandaloneTestTemplateProject/CMakeLists.txt project
with the current test source directory to create a complete CMake project.
This commit will allow a test to have these lines at top:
cmake_minimum_required(VERSION 3.16)
if (NOT QT_BUILD_STANDALONE_TESTS AND NOT QT_BUILDING_QT)
project(a_qt_test LANGUAGES C CXX ASM)
find_package(Qt6BuildInternals COMPONENTS STANDALONE_TEST)
endif()
and be standalone and work with any IDE capable of loading CMake projects.
Fixes: QTCREATORBUG-25389
Pick-to: 6.1
Change-Id: If3f878b7e560a8bfbb604a8f1aa30b7962742e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain repositories like qtsvg, qtimageformats and qtvirtualkyboard
build plugins associated with Qt modules from other repositories
(qtsvg's QSvgPlugin associated to qtbase's QtGui).
When configuring in-tree tests in the same build folder as the
repository, the test executables would not automatically link to these
plugins.
Fix this by recording the existence of such plugins in a separate
property of the associated Qt module and only link them when both the
test executable and plugin are from the same project (their
PROJECT_NAME coincides).
This is in addition to linking the plugins associated with the
module where both are built in the same repository.
The logic is a bit tricky and ensures that plugins are not
accidentally initialized twice, so that in-tree tests work for both
top-level and per-repo builds.
As a drive-by, added a TODO explaining why in-tree tests that need to
link to static QML plugins won't work (somewhat unrelated to this
change).
Amends 734d2cdbc4ff6db6b3df8fffbb23dbbb565c076b
Amends b1fcdad9c9b9ad2bddd00f7301c8dd1159d523c2
Pick-to: 6.1
Task-number: QTBUG-87580
Change-Id: I3e1ff8166864f92dea931ec2ea34b6f56b4eec60
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add SOLARIS cmake platform definition.
Add settings for QT_DEFAULT_MKSPEC so that qplatformdefs.h can be found.
Solaris has its gssapi symbols in libgss.
Solaris supports @ORIGIN.
Solaris ld does not support --dynamic-list needed for reduce relocations.
Make solaris fail the reduce relocation test.
getauxval is specific to GNU libc and some other libc implementations on
Linux but sys/auxv.h is not. The bootstrap uses sys/aux.h as the only
indication for getauxval. This breaks builds on Solaris, so only make
sys/auxv.h an indicator for getauxval on linux or glibc based systems.
Solaris uses X11 so add it to the X11_SUPPORTED list.
Solaris network libraries for sockets etc are in socket and nsl.
ifreq does not have a member ifr_ifindex on Solaris, it uses
ifr_index. Add test to check if ifr_index is a member of ifreq.
The first struct in the in_addr union on solaris is defined as four
uint8_t, therefore four arguments are needed for its initializer list.
Change-Id: Ieed4c1bbac8559a7ae1db9c4e1e91f609f150270
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The change introduced in 98e8180e56
fixes reconfiguration issues for repositories that provide plugins
associated with modules from a different repository
(QSvgPlugin -> QtGui -> qtbase).
It does so by only loading the public Plugin CMake packages of
dependent repositories.
For executables / tests that are built as part of the current
repository, plugins are linked via a different simplified mechanism in
qt_add_internal_plugin and qt_internal_add_plugin in order to prevent
exporting link cycles between plugins and Qt modules.
This works for the majority of in-tree tests, but unfortunately breaks
static standalone tests.
For example in qtbase neither mechanism will link plugins to the
standalone tests:
- qtbase has no repo dependencies, so the first mechanism (loading of
public plugin packages) is skipped because we assume we are merely
reconfiguring the main build of qtbase and we don't want to
accidentally create duplicate plugin targets
- because a standalone test configuration does not call
qt_internal_add_plugin, no association is done between qt plugin
and module and thus all tests (qt_internal_add_test ->
qt_internal_add_executable) don't get the simplified plugin
linking
Fix this by allowing loading of the public CMake plugin packages when
doing standalone tests. It should be safe to do so because we don't
build any plugins in this case, only tests.
Amends 98e8180e56
Pick-to: 6.1
Task-number: QTBUG-87580
Change-Id: I690a0366c73a24e7f49c65ed13cd70362c273d81
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In commit 013abe3206, I add
_CRT_SECURE_NO_WARNINGS definition for all Qt internal module targets,
to suppress MSVC warnings like:
warning C4996: 'strncpy': This function or variable may be unsafe.
However, when compiling some internal tools, such as qmake and qdoc,
such warnings also exist. To suppress this kind of warning entirely,
_CRT_SECURE_NO_WARNINGS definition should be added for all Qt internal
targets when using MSVC compiler.
Pick-to: 6.1
Change-Id: I9c37b20672f9d0f470e3e9ea847e5221f43bfc04
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Currently, FindWrapBrotli.cmake depends on vcpkg or PkgConfig. But for
users who build Brotli by themselves and don't have vcpkg or PkgConfig,
the Brotli cannot be found.
As a reference, I use following CMake commands to build Brotli:
cmake path/to/Brotli/source -G"Ninja Multi-Config"
-DCMAKE_CONFIGURATION_TYPES=Release;Debug -DCMAKE_CROSS_CONFIGS=all
-DCMAKE_DEFAULT_CONFIGS=all -DCMAKE_DEBUG_POSTFIX=d
-DCMAKE_INSTALL_PREFIX=path/to/install
Pick-to: 6.1
Change-Id: I2fa8d3293dd55ebc18937e13fac40d144ca4c1e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the CI system, we build qtbase with CMAKE_INSTALL_PREFIX set to a
path without a drive letter to support DESTDIR when installing.
Other Qt modules are built without CMAKE_INSTALL_PREFIX set. The
Qt6BuildInternals package provides a default value.
Since commit e6527e2f73 this default
prefix is calculated from the current installation location. This
default prefix however has a drive letter, breaking DESTDIR support.
Broken DESTDIR support in this case means for Android that file(INSTALL)
can properly install but stripping will silently fail.
We now compare the "real path" of the original prefix from qtbase and
the calculated prefix. When they're equal, we use the original
CMAKE_INSTALL_PREFIX.
Fixes: QTBUG-92890
Change-Id: I96fb0655e02c5c695722b7e01a32e209cbdea4cc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 15b26935fca4ab14298abdcc70b3cb15b6cca195)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Add an iOS specific plist file like we do for macOS.
If the user hasn't specified a bundle identifier or a development
team id, do what qmake does and query the Xcode preferences file to
pre-populate those if possible.
This allows running
cmake -GXcode ./foo
on a Qt example project and building it with xcodebuild on the
command line without having to go through the IDE to set a development
team id or modifying the example project to add a product
bundle identifier.
Note that the change assumes that the development team id has been
previously set / configured via Xcode. If no such id is found, then
the value will not be set and the user will still have to specify it
either in the project file or via the Xcode UI after the project
has been generated.
Amends 3a2fa3fec5
Pick-to: 6.1
Change-Id: Iaab4e57de72c9877fb9035d28f9a879b2c91a33c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The directory-level targets missed the first level of sub-targets.
E.g. `qtbase_qmake` did not have a dependency to `qmake`.
Fix qt_build_internals_get_repo_targets to first grab all targets of the
subdirectory and then recurse.
Pick-to: 6.1 6.0
Change-Id: I3604000caec22fac9a4cc5f5aaf651d550d16793
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
With CMake 3.20.1 AUTOMOC can crash or hang on Windows when used with
a Qt installation that supports moc depfiles due to missing
multi-threaded locking.
Warn and advise to use a different CMake version instead.
Change-Id: I78d2269c48dfc2541bebcd6ab23aaa5595012149
Pick-to: 6.1 6.0
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We need the metatypes for anything directly or indirectly exposed to
QML. Switching this on has no runtime overhead. For interface libraries
we cannot generate any metatypes, though.
Change-Id: I7b7f85bb4e16c28d00383c5c88b0f1c172c8d193
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Homebrew introduced a new default prefix for Apple Silicon machines,
so that both arm64 and x86_64 packages can be co-installed on a single
system.
The intel packages are installed into /usr/local and the arm64
packages are installed into /opt/homebrew.
For Qt building purposes, we don't want to find packages in any of
homebrew's prefixes unless explicitly requested by the user
Currently our arm64 macOS CI config does pick up system libs under new
prefix.
Remove the new path from the system prefixes.
Amends f3c7d22dd0
Task-number: QTBUG-85447
Change-Id: I381d31c95bcdab26147a331444ba40c7af9d0a95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
So that the correct version is generated in top-level builds.
Change-Id: I360370815ce178564cc79157dc61d70adfd4f947
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake makes possible to specify a target in the target_link_library
call even if the target is not declared yet. This adds flexibility to
the target declaration arrangement. For the Qt modules we have to
restrict freedom, because of the .prl files generating. If the Qt
module depends on another Qt module, the dependecy must be declared
before the module finalizing step, otherwise this will cause invalid
records in the module .prl file.
TODO: The dependency order issue could be solved by using conditional
genex's when generating step1 .prl file. But we ask developers to
depend on Qt module targets that have been defined before their usage.
Fixes: QTBUG-89467
Change-Id: I12ce1000048fd4a2f3334f17720c8df1c680ca20
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The find script checked for UIKIT which is set during a Qt build
in QtPlaformSupport.cmake but is not set when building a user project.
This casused the find script to skip the iOS specific code that
passed the -framework OpenGLES linker flag.
This broke SDK switching in Xcode.
Check the IOS variable instead which is set by CMake for all projects
that pass -DCMAKE_SYSTEM_NAME=iOS.
Pick-to: 6.1
Change-Id: I9bd088f317917544ccfeff61fc4ff90f18f0f3d8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before this change, we created a CMake toolchain file for iOS and
macOS universal which propagated the initially configured
CMAKE_OSX_ARCHITECTURES values to user projects.
So if Qt was configured with 2 arches, configuring a CMake user
project using the generated toolchain file would also build the
user project targeting those 2 arches.
The reason for this that the same toolchain file is used for
configuring both Qt and users projects and we needed to ensure that
other Qt repos are built with the same set of arches. That
unfortunately led the multiple arches to carry over into user
projects.
This is different from qmake behavior which configured user projects
with 1 arch only.
Instead of the toolchain file explicitly setting
CMAKE_OSX_ARCHITECTURES for all projects, save the initial list of
arches into QT_OSX_ARCHITECTURES.
Then if the toolchain file detects that we're building a Qt repo (by
checking for the presence of QT_REPO_MODULE_VERSION) set
CMAKE_OSX_ARCHITECTURES to QT_OSX_ARCHITECTURES to propagate the
initial list of arches.
For user projects we want to have some sensible defaults.
For macOS projects, leave the decision of the architecture to build
to CMake.
For iOS Xcode projects, leave the decision to Xcode.
For iOS Ninja projects, set the architecture to the first value of the
architectures used when configuring Qt.
As a side note this fixes an issue in our CI where we configured macOS
Qt with 2 architectures and then tried to run CMake build tests for
both architectures on a machine that doesn't have the universal SDK.
This led to build failures.
Because the CMake build tests act as regular user projects, now they
are configured with a single architecture that is automtically
detected by CMake.
Pick-to: 6.1
Task-number: QTBUG-85447
Change-Id: Id1b7e78d7e67c1796efed10751416e5f857c16d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The CoreMotion is required by the QtSensor module.
Task-number: QTBUG-92502
Change-Id: I7f1853131aa96b2cb052862d5bf492df5ec18150
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The 'list(TRANSFORM cmake_args REPLACE "\\[\\[;\\]\\]" "\\\\;")' call
breaks the list arguments added when evaluating the 'INPUT_' values.
Therefore, it's necessary to apply bracket-based escaping to all list
arguments instead of the standard escaping.
Amends 856fadf85c
Fixes: QTBUG-92459
Change-Id: Ifd4e0ca5f549a1c7fab9ceb587ed355250c4e677
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Expand the condition without an extra negation.
This fixes incorrect condition evaluation for conditions not enclosed
in parenthesis.
Pick-to: 6.1
Change-Id: I4923059b6b199676058091c23d51c9368daaebd0
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the plugin .pri files that CMake generated for qmake
consumption contained an '-' to exclude the plugin from
auto-importing only if the plugin type was generic or a platform
plugin.
Now that plugin projects that should be excluded have a proper
DEFAULT_IF FALSE
clause, we can simply query for the defaultness of the plugin
to know whether to exclude it in the generated .pri file.
This fixes an issue with Qt static builds and qtvirtualkeyboard.
The vkb plugin was not excluded and thus any simple QtGui app
linked to the vkb plugin in a static qmake project. This led to linker
issues because the vkb plugin also depends on a vkb quick plugin which
is not listed as a dependency.
Augments 76230d9879
Amends c975c35eae
Pick-to: 6.1 6.1.0
Fixes: QTBUG-92529
Task-number: QTBUG-87861
Change-Id: I9671f6504374cf0799289bbe19110e01c129402e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_executable has some special logic to link static
plugins in order to avoid issues with link cycles on exported
Qt module targets. This logic does not take into account if a plugin
is a default plugin.
On windows this caused duplicate symbol linking issues in static super
builds, because both qwindows and qdirect2d define a subset of
the same symbols.
Make sure to only link to default static plugins.
This will skip linking to qdirect2d because it's not a default qpa
plugin and thus avoid linker issues.
Amends 5807e1ae81
Pick-to: 6.1 6.1.0
Fixes: QTBUG-92451
Change-Id: I56df2ce0201625088417de53038642518c1d3bbd
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.20.0 can create autogen-related cyclic dependencies that are
only detected at build time by Ninja, which then fails with a build error.
Warn and advise to use a different CMake version instead.
Pick-to: 6.1 6.0
Change-Id: I9bef973ad2efdb69f28d6a9e0584b543be59f17f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugin meta-sets are not visible outside of the module build tree, so
there is no point in adding dependencies for externally added plugins.
Change-Id: Ica5b29b57c032f4fc9b128172aaa806392e9e581
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_TESTCASE_BUILDDIR was implicitly defined by Qt::Test target for
library users in Qt5. By default, this definition will point to
CMAKE_CURRENT_BINARY_DIR. This logic works similarly to qmake logic.
From user's perspective it might be useful to not rely on standard
search paths, but specify own. This can be done by setting the
QT_TESTCASE_BUILDDIR property for the user's target. CMake will
substute the value of the QT_TESTCASE_BUILDDIR property into the
QT_TESTCASE_BUILDDIR definition.
The implicit QT_TESTCASE_SOURCEDIR also seems to be useful. According
to the current logic, it points to CMAKE_CURRENT_SOURCE_DIR.
Fixes: QTBUG-92079
Change-Id: I8a9065f08e859c713b3c8cc08142a9ced0677770
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The generated object resource library depends on the Qt::Core library
because uses the functions defined in qresource.cpp. Dummy linking of
the Qt::Core to an object library has an effect only when the object
library is linked directly to the executable as a target. If we link
the object library as INTERFACE library we miss out all the objects
that need to be linked to the executable. This behavior is explained
here:
https://bit.ly/3sFWKvI
Thus, the only option to link the object library objects to the
endpoint executable is to use TARGET_OBJECTS property in genex, as
it's already done. But that means we are losing all profits that
target actually has, especially linking the object library dependencies.
The combination of both of the above methods does the job. The only
thing that looks fragile so far is order. Currently, the order we
use in the target_link_library call applies to the linker command line.
This means the object library objects must always appear before the
object library target.
Change-Id: If1f0e35e0445d5e96a1f2249ab44114cd36630e9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugin targets don't fit the requirements of the module but use
the function associated to the module. The purpose of using
qt_internal_module_info is to get the path to the top-level include
directory. So there is no point in breaking the encapsulation rules
to get a well-known directory.
Change-Id: If3d2a31d4ec186929e3d662a79a1ae9eac988d1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qt_internal_add_simd can now take an EXCLUDE_OSX_ARCHITECTURES list of
values which specifies for which architectures the simd compile flags
should not be added.
This is relevant for macOS universal builds.
Example
CMAKE_OSX_ARCHITECTURES is "x86_64;arm64"
EXCLUDE_OSX_ARCHITECTURES is "arm64"
SIMD is avx2
the final compiler flags that will be added are "-Xarch_x86_64 -mavx2"
Slightly, clean up the function implementation and document its
arguments.
NAME handling has been removed because it's dead code that hasn't been
removed as part of 1b7008a3d7.
Task-number: QTBUG-85447
Change-Id: I395c19bdd67219bebb6b5b8d9f418b6e6488e09b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Whenever something went wrong with building the arch test or extracting
info from it, the failure messages lacked useful details.
It's especially hard to figure out what went wrong if the failure
happened in the CI.
Print a bunch of useful information in case of failure.
Change-Id: Iafe287f951880c1441e57924ae372d6a9029a9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
On Windows, we need to strip drive letter and colon before prepending
DESTDIR when creating our versioned hard links.
This fixes CI submodule updates.
Change-Id: I41bc5f27b714ef74d3fadc4a0fb16c3d8b20da1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 88886f193230292f38987ac4f1503753f50786f0)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
qt3d/9a473a3c9b246f4895ae73d7060745b8b199a6c5 introduced a find_package
call in a configure.cmake file, very subtly breaking top-level builds
with configure.
The find_package call results in errors of the cmake call that runs
QtProcessConfigureArgs.cmake (see bug report for details).
Create a find_package stub that errors out with a helpful message.
Task-number: QTBUG-92163
Change-Id: I06db0bf219b965e93b78c690e9f7ad868196ddb9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake 3.19 removed the restrictions on allowable names for properties
on INTERFACE targets. With earlier CMake versions (back to CMake 3.11),
names for custom properties must begin with either a lowercase letter
or an underscore.
In 5807e1ae81 (Add plugins to Qt tools and executables for static
builds, 2021-03-19), the names QT_REPO_PLUGIN_CLASS_NAMES and
QT_REPO_PLUGINS were used, but in some cases, the targets on which they
were being set are INTERFACE targets. Replace these with names that
are supported with CMake 3.11 or later.
Amends 5807e1ae81
Task-number: QTBUG-91915
Pick-to: 6.1
Change-Id: Ife702a1fb339b190d46a8dafb380253219199ba6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the recent refactoring of qt_internal_add_plugin, a new target
existence check was added when associating a plugin with a qt module.
That check didn't account for a qualified qt module target name.
This failed configuration of qtsvg which checked for the existence of
a namespace-less 'Gui' in a per-repo build.
Make sure to prepend the Qt namespace to the qt module name and also
handle aliased target names.
As a drive-by, add a TODO item to figure out how to link executables
to plugins who's plugin type belong to a different repo, but both the
executable and plugin are built in the current repo.
Amends aa4a1006cb
Fixes: QTBUG-92235
Change-Id: I1c0f83672ab00f4702be9bad9a66ccc35e82f5c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 734d2cdbc4ff6db6b3df8fffbb23dbbb565c076b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
list(TRANSFORM ...) unexpectedly removes semicolon escaping in list
items. So the list arguments seems to be broken. The 'bracket argument'
suppresses this behavior. Right before forwarding command line
arguments to the cmake call, 'bracket arguments'are replaced by escaped
semicolons back.
Recent fix escapes all semicolons of the 'configure_args' and glues
all arguments to a single 'list'.
Amends df8e1c8e58
Change-Id: I4a458b9e3add307b36924c4c7c7f739d348f9343
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If SKIP_INSTALL option is specified for the qt_internal_add_plugin
function the install_directory variable become empty and finalizer unable
to call qt_finalize_plugin, because of lack of the second argument. It
makes sense to use the INSTALL_PATH single argument instead.
Change-Id: I2d4b40c8cf812a834c0e045569b45a649d339508
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove code duplication by calling qt6_add_plugin() from
qt_internal_add_plugin().
Separate out the public and internal arguments for the
variables defined in QtBuild.cmake for these functions.
Provide them via commands instead for greater robustness.
This separation allows other Qt repos to access the appropriate
set of keywords where they define commands that forward
on to *_add_plugin() in their implementations. Retain
the old variables for now to simplify the integration
steps for updating other repos. The old variables can
be removed once there are no more references left to
them in any repo.
Task-number: QTBUG-88763
Pick-to: 6.1
Change-Id: I0105523afd95995923bd20fc963d245bbb15d34d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building and installing a Qt repo that provides plugins for a Qt
module within a different repository (for example, qtimageformats
providing imageformat plugins for QtGui), re-configuring that repository
would result in configuration errors like
"add_library cannot create ALIAS target "Qt6::QTgaPlugin" because
another target with the same name already exists."
This happened, because the find_package(Qt6 COMPONENTS Gui) calls pulled
in the Qt6*PluginConfig.cmake files that create imported targets for the
plugins we want to build.
To fix this, when building Qt, we now load only plugins that are
provided by repositories the currently building repository depends on.
We read the repo dependencies from dependencies.yaml when the
Qt6BuildInternals package is loaded, but only in static builds and only
if we're currently building a Qt repository.
To find out whether we're building a Qt repository, we check whether
QT_REPO_MODULE_VERSION is defined. We cannot check QT_BUILDING_QT,
because that variable is not available for the first find_package calls
in the repository's top-level project file.
In each Qt6*PluginConfig.cmake file, we bail out if the plugin's
repository is not one of the ones in QT_REPO_DEPENDENCIES.
Fixes: QTBUG-86670
Fixes: QTBUG-91887
Change-Id: I8f6c8398032227032742f1ca019e983ff2bcd745
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the option argument INSTALL_VERSIONED_LINK to qt_internal_add_tool
and qt_internal_add_app. For tools/apps with this argument we create an
install rule that creates a versioned hard link. For example, for
bin/qmake we create bin/qmake6.
Note that this only applies to prefix builds.
Apply this argument to qmake.
The qt_internal_add_app change is necessary for qtdiag and in qttools.
Task-number: QTBUG-89170
Change-Id: Id32d6055544c475166f4d854aaeb6292fbb5fbb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit c19d957f45fa27f61b5ecc566f8dbc19f12a44c3)
In the CI on a windows we configure Qt with the following prefix
-DCMAKE_INSTALL_PREFIX:PATH=\Users\qt\work\install
Note the lack of the drive letter.
This is intentional, so that we can abuse CMake's DESTDIR installation
mechanism to install into a custom path.
This causes trouble for static Qt builds in the CI.
Specifically when there is no qt.conf file next to qmake, qmake -query
will report a
QT_INSTALL_PREFIX:/Users/qt/work/install
and ultimately qmake will fail to locate the module .pri files in such
a path, showing errors like:
Project ERROR: Unknown module(s) in QT: core gui?
If a qt.conf is placed next to qmake (even an empty one), a differenct
code path is used in qmake to resolve the prefix, which returns a path
with a drive letter.
In a shared build, because the 'relocatable' feature is enabled by
default, a different code path is used and thus the prefix is
also successfully resolved.
So the problem is specific to static Windows Qt builds that have no
qt.conf file next to qmake.
This is the exact scenario that we encounter when running static
Qt tests (tst_qmake in particular).
To circumvent the issue, prepend a drive letter to the prefix
hardcoded into qconfig.cpp. Do that with
get_filename_component(REALPATH) which apparently resolves
to a fully qualified path.
Pick-to: 6.1
Task-number: QTBUG-87580
Change-Id: I17c885f29bfdee45bec1d6aac7c3b26723e761a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The code was added as part of
a6ccef651d
but the important bits were removed as part of
c431e2d33c
Change-Id: I6ba7bffa2bfdbeae2c92cd9ffeaa5f31771eedde
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Passing e.g. -- -DQT_BUILD_SUBMODULES="qtbase;qtdeclarative" to
configure would fail because the module list was not preserved
as a single argument.
Change-Id: If685d0d541201597a2c2a5dc3d55b5d1ae51da22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In static builds, we cannot allow any part of the main build to make a
call to find_package(Qt6...) where such a call may load a
Qt6*Plugins.cmake file. That would add additional dependencies to the
main module targets, setting up a circular dependency in the set of
*Config.cmake files which cannot be resolved. This scenario would be
triggered by per-repo builds or user projects.
But Qt's tools and other executables still need to load some plugins
in static builds. Sometimes a platform plugin may be enough, other
times we may want all supportable plugins (e.g. Qt Designer).
Therefore, add all plugins we can identify as relevant for an
executable that is part of the Qt build, but add them directly to the
executable without affecting the linking relationships between the
main module libraries.
Also remove the now unnecessary check for QT_BUILD_PROJECT_NAME in
top level builds because there should be no difference between per-repo
and top level builds any more (as far as linking static plugins is
concerned).
Examples that build as part of the main build will still build
successfully after this change, but they will not run if they require
a platform plugin. Examples need to be moved out to a separate build
where they can call find_package(Qt6) without QT_NO_CREATE_TARGETS
set to TRUE to be runnable (see QTBUG-90820).
Fixes: QTBUG-91915
Pick-to: 6.1
Change-Id: I8088baddb54e394ca111b103313596d6743570ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On BSD systems backtrace lies in libexecinfo. Use
FindBacktrace from CMake to be able to resolve
backtrace on more unixes than linux.
Change-Id: Ie14fd1727d2da03645fc2d6de10c0217baabad6b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The $<NOT:...> genex already guarantees to return a value of 0 or 1,
so there's no need to wrap it with $<BOOL:...>.
Pick-to: 6.0 6.1
Change-Id: Iff4ad64ed8deaa846e1b5bc22d2e5d9dbcd77cc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using CMAKE_C_COMPILER to match the compiler
has its drawbacks. CMAKE_C_COMPILER can include
the whole path to the compiler and directory
names that incude icc, icl or qcc also match
even if the compiler is not icc or qcc.
Icc has the compiler id Intel according to
the CMake documentation.
The compiler id for qcc is QCC according to
CMake policy 0047, and this is set to new since
Qt requires CMake to be above 3.0.
Change-Id: Iceb428ed10f0f5bbaa19ec2d883da186c85e7a73
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Set QT_DEFAULT_MKSPEC for various bsd systems, this is needed to
find qplatformdefs.h when compiling.
Change-Id: I9450193b737930548f32c87be3525c5ecd1e0e13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In particular that influences BundledLibrary targets.
Most internal targets already depended transitively on Qt::Platform
via Qt::Core as a public dependency. This was not the case for
BundledLibrary targets which don't link to Qt::Core.
This led to compilation issues in user projects when targeting
WebAssembly, due to mismatched flags between a bundled Harfbuzz vs
a user project. Probably other subtle issues as well (e.g. none of the
Windows specific compile definitions were passed to bundled libs).
Bundled libraries depend on PlatformCommonInternal already, so make
PlatformCommonInternal turn depend on the public Platform target.
I thought that was already the case, but we merely relied on the
Qt::Core dependency.
Note that Qt::Core should still list Platform as a public dependency,
so it gets propagated to user projects.
Amends acf9b3a68b
Change-Id: Ida3b219818f89ec6eba2c2d92c5db65ad56bc5a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A call to file(WRITE) will unconditionally update the file's timestamp
even if the file's contents don't change. The *Plugin.cpp file was
being written using configure_file() which avoids that, but the .cpp.in
file it was configuring from was being written out using file(WRITE)
every time CMake ran. Autogen saw that file as a dependency and then
regenerated the mocs_compilation.cpp file, which in turn results in
unnecessary rebuilds and relinking when nothing is actually changing.
The file(WRITE) - configure_file() dance is no longer needed anyway,
since the generated *Plugin.cpp file is very simple with no
substitutions required. Therefore, we can simplify that file's
generation with a single file(WRITE) that only executes if the file
contents will change or the file is missing.
Pick-to: 6.1 6.0
Change-Id: I2b7d1ff678b85ea7811969d656555592c9b6865f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When configuring a benchmark using the standalone-test script the
'benchmark' target is not available, causing a configure error.
Pick-to: 6.1 6.0
Change-Id: I8e480c9e72b47783c0910428187f0092049e89db
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In shadow per-repo builds we never hit the code that is supposed to
install cmake/Find*.cmake files. This caused problems when statically
building a Qt repo like qtshadertools against qtimageformats which
provides such Find*.cmake files.
Fixes: QTBUG-91538
Change-Id: I1147daee817ac71303d93e8bf368b2769afb0bb4
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change "Enable X11 on other platforms than just Linux"
uses qt_set01 in a configure.cmake file but does not add it
to the stubs list in QtProcessConfigureArgs.cmake thus
breaking builds based on configure.
Add a defstub with qt_set01 to fix this.
Change-Id: Ia3e0ec61df5228f88f77f631968f6f96d567ec8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
androiddeployqt relies on *-android-dependencies.xml files to know
what dependencies like jar files and permissions a Qt module requires.
CMake create those files under Qt prefix's lib dir but CMake was not
accounting for module plugins.
Fixes: QTBUG-90812
Pick-to: 6.1 6.0
Change-Id: Ib3b2e2bb237159b4851ac0f23dc75f8e56af3f7a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt is built with CMake since 6.0 and the QMake build system was removed
in 6.1. It's time to remove the -cmake and -qmake configure arguments
for Qt 6.2.
Fixes: QTBUG-88286
Change-Id: Ie726ec364ded025f8d93bd69b469561a6ae40aa9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building a module against an installer-provided Qt,
CMAKE_INSTALL_PREFIX would default to /home/qt/work/install, which is
the install prefix of our packaging machines.
Do not hard-code the install prefix in QtBuildInternalsExtra.cmake but
use the one that is calculated from the location of
QtBuildInternalsExtra.cmake.
Pick-to: 6.1
Fixes: QTBUG-90449
Fixes: QTBUG-91475
Change-Id: I39f214efb18796a89f00a171ef190c547bba5c0a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For each plugin, we create a custom target with it's OUTPUT_NAME such
that one simply can do 'ninja qtuiotouchplugin' to build it.
QTuiTouchPlugin has qtuiotouchplugin as OUTPUT_NAME, which is
problematic with Makefile generators on case-insensitive file systems.
See CMake upstream issue #21915 for details.
Work around this issue by not creating the custom target in this
situation.
Pick-to: 6.1
Fixes: QTBUG-84342
Change-Id: Id9a6cf0a01c179d5c93da4146e393cf00153ac4f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now that we're not actually using qmakeconfig.cpp anymore, we can remove
it together with all qmake-related information that was written into
qconfig.cpp.
This also moves the qtConfEntries array back to qlibraryinfo.cpp.
Change-Id: I5e57d8c55613332cc3e57b11df4398d46aed259b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those have fixed values.
Change-Id: I7f1ba8036f43413d3c805f4b419ae79e037343fb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Includes both minimum deployment targets and minimum sdk
versions.
As per supported Apple platforms versions which was done
in qt/qtdoc at
8807fdedce29cbbd7662fcd745234da30eace3fb
For Qt for iOS 6.0.x we only bump the minimum
deloyment target because applications seem to crash with iOS 12.4+,
and it's better to have a build error than a runtime error.
The minimum required sdk will not be bumped for 6.0.x, so we don't
accidentally break someone's existing build, given that 6.0 is already
released.
Pick-to: 6.1
Task-number: QTCREATORBUG-23574
Change-Id: I3046384164f2d7fdbd0cfd16dcb85e0d60bc56ce
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Associated changes in the qtdeclarative repo now ensure that arguments
for qml plugins are handled on the calling side. This reduces the
qml-specific logic needed in qtbase and gives qtdeclarative clearer
control over qml build and install locations.
As part of that work, the INSTALL_LOCATION keyword used in
qt_internal_record_rcc_object_files() has been renamed to
INSTALL_DIRECTORY to make it consistent with the keyword used for the
same concept in other commands.
Pick-to: 6.1
Change-Id: Iebd319899f63d79fbe15ce965b84ce324c28a508
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Features that are not emitted in the current
configuration (e.g. plugin-manifests on Linux) should not yield an
error. Instead, print a warning message like Qt5's configure did.
Set insignificant feature to OFF.
Remove the now unneeded emit_if parameter from
qt_feature_set_cache_value.
Pick-to: 6.1
Fixes: QTBUG-88305
Change-Id: I0f2ce152fca5f08417038c9bd2c07639ff6a3df4
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
With the existing types we can only display a list of features or
whether a feature is on or off, but we cannot display arbitrary values.
Using the new message type, it is possible to show paths or versions as
summary entries.
Change-Id: I5d16cb4b30923f3566755bd4d7440bdd1ece82f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
configure.cmake files are read twice when using the configure script /
qt-configure-module: First, when configure is running and a second time,
when CMake creates the local build system files.
In the first run, not every function and esp. no targets are
available. Code in configure.cmake that accesses targets or calls
functions unknown to configure will fail at the configure stage.
This patch introduces the QT_CONFIGURE_RUNNING variable that can be used
in configure.cmake files to guard such code:
if(QT_CONFIGURE_RUNNING)
set(_qt_coord_type double)
else()
get_property(_qt_coord_type TARGET Qt6::Core
PROPERTY INTERFACE_QT_COORD_TYPE)
endif()
Change-Id: Iff39924d6a5133379d28c8204d7b7afdf47de5c8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Fix the name in the function's doc comment and error messages.
Pick-to: 6.1
Change-Id: I918db802a0dbb0508f65d227f7c896d2ad0beeae
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QtAutoDetect.cmake did read the (possibly detected) toolchain file and
looked for the string "The Android Open Source Project" to deduce that
we want to build for Android. This has been done, because we're
autodetecting the platform before the first project comment, i.e. before
the toolchain file is loaded.
This magic string detection is a bit fragile, and we need a similar
approach for WebAssembly. A more robust approach would be to fetch the
value of CMAKE_SYSTEM_NAME from the toolchain file without actually
loading it.
Now, we run a CMake script that includes the toolchain file and prints
variables were interested in. The calling code reads these variables and
stores them in prefixed variables in the current scope.
Change-Id: Ide9ea3054e1453d17129523e1ec86ecaed55af2a
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
c++latest does check that our headers also work with upcoming C++20
support in MSVC. It also implicitly sets -permissive-, which checks for
stricter standards compliance.
Pick-to: 6.1
Task-number: QTBUG-91117
Change-Id: Iaf1547191969213d570a1b2f59888ad04a7977ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Allow to set QT_ADDITIONAL_PACKAGES_PREFIX_PATH as both an env
variable and CMake cache variable. Also normalize path and list
separators, so that they can be used similar to CMAKE_PREFIX_PATH.
The environment variable is intended to be set by the conan virtualenv
generator, so that e.g.
find_package(Qt6 COMPONENTS NetworkAuth REQUIRED)
also works if NetworkAuth is not installed into the Qt prefix.
Pick-to: 6.1
Fixes: QTBUG-91142
Change-Id: Ia9f9b9fa2b1b051d33073629139640d0f4c7a843
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
When packaging different Qt versions for Linux distributions (or any
distribution with a common bin dir), Qt tools cannot be installed to
/usr/bin, because the executable names of the different Qt versions
clash.
To solve this conflict, our recommendation is to install Qt's tools to
/usr/lib/qt6/bin and to create versioned symlinks to user-facing tools
in /usr/bin.
User-facing tools are tools that are supposed to be started manually by
the user. They are marked in Qt's build system. Distro package
maintainers can now configure with
-DCMAKE_INSTALL_PREFIX=/usr
-DINSTALL_BINDIR=/usr/lib/qt6/bin
-DINSTALL_PUBLICBINDIR=/usr/bin
and will find a file called user_facing_tool_links.txt in the build
directory after the cmake run. Nothing will be installed to
INSTALL_PUBLICBINDIR.
Each line of user_facing_tool_links.txt consists of the installation
path of a user-facing application followed by a space and the versioned
link name in INSTALL_PUBLICBINDIR.
Example content:
/usr/lib/qt6/bin/qmake /usr/bin/qmake6
To actually create the versioned symlinks, the content of this file can
be fed to ln like this:
xargs ln -s < build-dir/user_facing_tool_links.txt
Or the package maintainer may decide to do something completely
different as suits their needs.
This patch adds the USER_FACING argument to qt_internal_add_tool to mark
tools as user-facing. In addition, every Qt created by
qt_internal_add_app is treated as user-facing.
The only tool this patch marks as user-facing in qtbase is qmake.
Pick-to: 6.1
Fixes: QTBUG-89170
Change-Id: I52673b1c8d40f40f56a74203065553115e2c4de5
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Contrary to its name, this command was also setting a target property.
Since it was only called in one place and that caller can just as
easily set the property instead, rename the command to make clear its
internal nature and refactor it so that the caller is responsible for
setting that property instead.
Also make it an error rather than just a warning if the command is used
for a target that doesn't belong to any module. Since this is now
unambiguously an internal command, we should always expect the target
to belong to a module.
Pick-to: 6.1
Change-Id: I929a652ddd482653868fc9df887f38f4bc7f35d9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since the QT_CONFIGURE_HOSTBINDIR_TO_HOSTPREFIX_PATH and
QT_CONFIGURE_HOSTBINDIR_TO_EXTPREFIX_PATH definitions keep the same
value in modern CMake build, no need to have special handling in cases
where these values are used in qmake. Also it will be useful to
specify the relative path to the prefix directory from the directories
different of 'bin' when use QMakeLibraryInfo.
Task-number: QTBUG-75870
Change-Id: I5a777001eb334dcf05e22853a514d4257352d59b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move the qmake-specific logic of the QLibraryInfo class to
qmake internals. 'qconfig.cpp.in' now stores information about
the library info entries to keep them consistent between qmake
and the Core library. qmake requires specific features enabled
in the Core library, so building qmake will be skipped if the
features are not enabled.
All flags directly related to the qmake have been removed from
Core lib.
Remove all bootstrap related sections from qmake CMakeLists.txt
Task-number: QTBUG-89369
Change-Id: I26de157d3bfd4a5526699296e9d46e1c180b89ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The code branch for the INTERNAL argument did nothing, and we never call
qt_internal_add_linker_version_script with INTERNAL.
Change-Id: Ie369b4dac29cd1a977433ebfd662c198a3e1d0f2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Putting each keyword on its own line makes it much easier to read and
improves maintainability. It is friendlier to source control when
keywords need to be added or removed.
This commit introduces no functional change.
Pick-to: 6.1
Change-Id: I79efd039e5afa5f11f1d859405d6487ad6b3beb2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In static per-repo builds, we have a mix of targets provided by
packages and targets provided by the main build. For the builds that
create the packages, we must avoid adding a dependency for the main
module library target on its associated plugin targets or else the
package config files end up with a cyclic dependency that cannot be
resolved when something tries to consume them. This only happens for
static builds because we have been attaching a linking relationship
to the main module library that isn't really a true dependency, we
attached it only for convenience of things linking to that module
library.
To preserve that convenience linking without breaking the config
packages, we use the QT_NO_CREATE_TARGETS condition to prevent CMake
seeing that relationship when generating the *Config.cmake files.
Creating these relationships will be delayed until the plugin's
*Config.cmake file is loaded, at which point it will add itself to
the main module library's imported target INTERFACE (this was already
done before, we just now rely solely on that).
Task-number: QTBUG-90819
Pick-to: 6.1
Change-Id: Id725742182bcda64841be84fe1650bafb9151bb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The pro2cmake.py conversion script faithfully reproduced the .pro files
for the plugins, which specified the libraries as public. But in CMake,
the implications of this are that public usage requirements should then
be propagated to consumers. We don't expect any consumers, since a
plugin is created as a MODULE library in CMake, so for Windows we don't
even have an import library to link with. The only exception to this is
for static builds where plugins are created as STATIC libraries
instead, but only in certain controlled situations do we then link to
plugins. Even then, usage requirements are not expected to propagate to
the consumers, so these relationships should always be specified as
private.
This change warns on any PUBLIC usage requirements specified for a
plugin. This check is disabled by default to avoid spamming CI builds
for repos that haven't been fixed yet. The check can be enabled by a
CMake cache option, which is intended for developers to use locally
when fixing this issue in other repos (all plugins in qtbase should
not trigger this warning as a result of changes in this commit).
Task-number: QTBUG-90819
Pick-to: 6.1
Change-Id: I09f2c8da77db1193ad3370f85d367dfc6ab7b9a6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We had two workarounds:
* script that adds Gui to tests
* create a symbolic link for the qt install dir to fake_prefix which
androiddelployqt was expecting them to be under
Both issues are fixed, thus removing the workarounds.
Pick-to: 6.1 6.0
Change-Id: Ic022bece15afe92c693d573893d260b13b4227ed
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
QMake used to allow retrieving the Android features list for a modules.
The dependencies are written to *-android-dependencies.xml files and are
read by androiddeployqt. This option was missed at some point along the
way of writing CMake port for Qt 6.
Pick-to: 6.1 6.0
Change-Id: Ic0b82f024567e640968f97aeff2db1888f2b53a5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Initial replacement of boolean INPUT_ variables to the FEATURE_
variables was wrongly changed to updating of the INPUT_ variable
value to ON/OFF value. This causes potential issues when INPUT_
variable has explicit check for 'yes' or 'no'.
The feature evaluation step enables FEATURE_ variables in case if
the corresponding INPUT_ variable contains a positive CMake value.
So there is no need to process boolean INPUTs at the argument
processing step.
Also no need to keep the special opengl case, since it will be
processed correctly.
Fixes: QTBUG-91158
Pick-to: 6.0
Pick-to: 6.1
Change-Id: I96bb7903a904ae3cf788d7ef7d4e0c019046eb95
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add the INSTALL_DIR argument to qt_internal_add_tool to allow
installation of tools in other locations than INSTALL_BINDIR.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: I88ede81a4c13c82f6d209156d3801ce130f8fc10
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The headers are already somewhat tested with C++17 in the regular
build. So let's try in the headers_clean check with C++20 instead.
Using C++20 with MSVC 19.28 doesn't work yet though:
corelib/tools/qalgorithms.h(247): error C2039: 'popcount': is not a member of 'std'
corelib/tools/qhashfunctions.h(311): note: see declaration of 'std'
corelib/tools/qalgorithms.h(247): error C3861: 'popcount': identifier not found
...
Task-number: QTQAINFRA-4242
Change-Id: I1b48bcb9656fe1587fe03d3a17e3484c693aa295
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests should follow their default output of txt as when run directly,
and any output configuration should be handled by the CI system.
Change-Id: Id0d72318df5edad1c58ac637e827d6043884e829
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Toni Saario <toni.saario@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Normal Android apps require Qt::Gui dependency and since tests don't
need to handle any special cases for an app without Qt::Gui, let's add
it by default.
This also will allow us to remove some workarounds done on CI side to
run tests for Android.
Fixes: QTBUG-90870
Pick-to: 6.0 6.1
Change-Id: I845650c17a1b73e4c4977043f863ec44e50f06c3
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
We must not guess the compiler from the -platform argument if one of the
following holds:
- the CXX/CC environment variables are set
- the CMAKE_CXX_COMPILER/CMAKE_C_COMPILER variables are passed
Pick-to: 6.1
Fixes: QTBUG-90914
Change-Id: Iff7a0e7b8857f77333f1705f118d7952af5234ba
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The attempt to call target_link_libraries on OpenSSL::Crypto failed when
this target was added as UNKNOWN library by FindOpenSSL.cmake.
Instead, set the INTERFACE_LINK_LIBRARIES property directly.
Pick-to: 6.1 6.0
Fixes: QTBUG-90925
Change-Id: Idbc1379c89480225fc7a8d417416ed20404a1122
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a feature is set in qtbase and is later set to another value,
an error occurs and an error message is given. This patch
changes the error message to contain both the preexisting and the
new value
Change-Id: Ifa9fc1f06bfde40e8fd5dfdf30165d4393abbd28
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This prevented androiddeployqt from properly deploying libraries which
specify init class via the ":" delimiter.
Pick-to: 6.0 6.1
Change-Id: Ib9cfa7edc864d7d540577df22284ceb9714a2511
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Keep the c++2a feature, but make it an alias for compatibility
purposes.
Pick-to: 6.1
Change-Id: I6f153109be84659806f1b7a57a88a187875166d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is supposed to be mapped to INSTALL_TRANSLATIONSDIR, not
INSTALL_TRANSLATIONDIR (without the s).
Pick-to: 6.0 6.1
Fixes: QTBUG-90946
Change-Id: Icec93ffc0dc80d9ac7cf6cf1b13824bc2a1e795f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The unquoted 'string(FIND ${toolchain_file_content} ...)' call fails for
multiline content of the variable toolchain_file_content, so add
quotes around, fixes:
[...]
CMake Error at cmake/QtAutoDetect.cmake:42 (string):
string sub-command FIND requires 3 or 4 parameters.
Call Stack (most recent call first):
cmake/QtAutoDetect.cmake:311 (qt_auto_detect_android)
CMakeLists.txt:19 (include)
[...]
-- Configuring incomplete, errors occurred!
in case the given toolchain file starts with multiple lines
in the first 80 characters, e.g. in the case of buildroot:
#
# Automatically generated file; DO NOT EDIT.
# CMake toolchain file for Buildroot
#
[...]
Task-number: QTBUG-90980
Pick-to: 6.0 6.1
Change-Id: I8e038e08d83016e8253f2e83b2efb8f06034c6cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Developer builds with RelWithDebInfo should also make benchmarks, it
is how we get good traces.
Change-Id: I009d40580d5d784f78bd18ebf21887ce3c1fa97d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In apple systems it's necessary to pass the framework paths to the moc
generator to resolve required header files. We need to collect framework
paths for all INCLUDE_DIRECTORY_TARGETS and add them to the command line
of the moc generator.
Task-number: QTBUG-84906
Change-Id: I9e6356e7e0a5f2493823ec764a48b0b8f1c8c10d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When using static OpenSSL, HAVE_openssl test will fail, because of
unresolved external symbols. These symbols are from Ws2_32.lib and
Crypt32.lib, which CMake does not link by default. In qmake build
system, we can use OPENSSL_LIBS variable to specify these system
libraries. But there is no similar variable in CMake build system.
Accordingly, we should let OpenSSL::Crypto target link these libraries.
Upstream issue:
https://gitlab.kitware.com/cmake/cmake/-/issues/19263
Pick-to: 6.0
Change-Id: I5f27790b251d0a0f71aaf2aed2b933aeb3326f1f
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add internal function to cleanup compiler flags out of the
CMAKE_xxx_FLAGS_xxx variables. Use introduced interface to clear
the '/EHsc' flag for the MSVC compiler family. This adjusts the
CMake behavior to the qmake one.
Change the 'EXCEPTIONS' option handling in helper functions. Add
ability to add enabling and disabling exception flags. Previously
it was only possible to add disabling exception flags.
Fixes: QTBUG-89952
Change-Id: I60d47660a97ae9b5a1d1f4107d352c9e97890144
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Header files of a Qt module are usually found in subdirectories.
Avoid creating object file paths like "header_foo/bar.h.o".
When building with conan, the "header_foo" subdirectory was not created
for whatever reason.
Now, we make sure we have clean object file paths, e.g.
"header_check/foo/bar.h.o", and we create the directory upfront before
invoking the compiler.
Fixes: QTBUG-90529
Change-Id: Ifa5d6b97e07fc4e249c58cda5128439d60b14f5f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
(cherry picked from commit 54980200c79b466a276a4d3054390e4b3162e9ed)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Commit 18fc9e1bf8 introduced a
Windows-only QT_TOOL_PATH_SETUP_COMMAND to make it possible to
call the tool of a module while building the module itself.
The "set PATH=..." command in QT_TOOL_PATH_SETUP_COMMAND was flawed,
because it contained escaped double quotes which made the set command ineffective.
Fix this by removing the escaping of the double quotes.
This was uncovered when porting qtscxml to CMake.
Change-Id: I5909aa841e7895d6d0feb4037a935b805ccfdc99
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In QtSetup.cmake the PROJECT_VERSION_MAJOR variable was used to
identify prefix of 'Qt<version>HostInfoConfig.cmake'.
Qt<version>HostInfo is not found, if project version differs
from qtbase version.
Move the 'INSTALL_CMAKE_NAMESPACE' and 'QT_CMAKE_EXPORT_NAMESPACE'
variables to 'QtBuildInternalsConfig.cmake'. In this case
variables will be exposed for a wider list of internal routines.
Use the 'INSTALL_CMAKE_NAMESPACE' variable as prefix to find
Qt<version>HostInfo module.
Fixes: QTBUG-90345
Change-Id: Ic595d1c5beb74f34e69b58e18590a3afc2f346f7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add CMake upstream(3.20.0) version of FindPostgreSQL.cmake, to avoid
server-related headers lookup.
Avoid using the Qt version of the PostgreSQL module, if it's
older than the CMake's one.
Fixes: QTBUG-89639
Change-Id: I71a0c3508000901969933aea8a08d1ad431db711
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
By not including ASM in the languages for which compiler flags are
adjusted, we can end up with inconsistent optimization and debug
settings between different languages. Make sure they are treated the
same.
Similarly, linker flags for MODULE target types should also have their
debugging and incremental linking flags adjusted, just like EXE and
SHARED targets. When building with MSVC, MODULE targets were having
the relevant flags stripped, but not then replaced with the desired
ones, leaving them empty in typical scenarios. This would primarily
affect plugins, which are built as MODULE rather than SHARED libraries.
Fixes: QTBUG-90237
Change-Id: I648ea74be1654d24cbecc592ce0ca4b59b2ae839
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Make the document reflect the current status of the port.
Also link to https://doc.qt.io/qt-6/build-sources.html and
https://wiki.qt.io/Building_Qt_6_from_Git as official sources
on how to build Qt. This document should IMO rather
concentrate on documenting the build system internals.
Pick-to: 6.0
Change-Id: If62cb966b41b7452edb5b63725756916b66affac
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When building a repository != qtbase, like qtactiveqt, QMAKE_PRL_LIBS
contained entries like Qt6Core and Qt6Widgets, meaning the linker line
would contain exactly these arguments.
When building an activeqt example with qmake, the link then failed with
"LNK1181: cannot open input file 'Qt6Widgets.obj'".
The correct entry would have been $$[QT_INSTALL_LIBS]/Qt6Widgets.obj.
Fix this by determining the full path to the import library in the first
step of the prl generation. This enables QtFinishPrlFile.cmake to
recognize Qt6Widgets as Qt module and generate the right QMAKE_PRL_LIBS
entry.
Pick-to: 6.0
Fixes: QTBUG-90520
Change-Id: Id0d9178da0e0dfc3ea4fadbbe8f5900d792ffc84
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Add '_WINDLL' definition for the MSVC compilers family.
Check the 'FEATURE_optimize_size' value before replacing compiler flags
in the qt_internal_add_optimize_full_flags function. This is required,
because Qt::Core and Qt::Gui modules lost their ability to shrink,
when selecting the appropriate build type or features.
Fixes: QTBUG-89952
Change-Id: I982c25ea84e4793b4006ead0ee516b3f3eb2a054
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit d0071a4f87 broke static top-level builds:
CMake Error at .../qtbase/lib/cmake/Qt6Gui/Qt6GuiPlugins.cmake:17 (set_property):
set_property can not be used on an ALIAS target.
Fixed by moving the un-aliasing of the target before the set_property
call.
Pick-to: 6.0
Change-Id: I96c731353798a58ff9b3a664f3614ef03c897dcb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Projects may call find_package(Qt6 ...) multiple times. When enabling
examples and tests, this happens a lot. For a statically built Qt,
for modules that have plugins (e.g. Gui), every time the module's
config file was loaded, it was generating and adding another copy of
the import plugin sources to the module target. These accumulated and
created many duplicates, which in turn blew out generation time and
made the build very inefficient.
This change checks whether the import plugin sources have already been
processed for the module target and ensures they are only added once.
It records its status on the target itself so that both local and
global targets are supported.
Fixes: QTBUG-90465
Change-Id: I1f45b1ee771a933ee755d44f1e983d6d9113dad0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This property is dynamically determined and set in the
Qt6${module-name}PluginsConfig.cmake files now.
There is no need anymore to export this property.
Change-Id: I2d164864c4099034b88f9ad852eae8b9f9e55f8b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
When doing a per-repository build of Qt, as it is done for the installer
packages, the build of qtbase has no knowledge of plugins that might be
built and installed from other repositories. That means we must not
write a fixed list of known plugins when exporting Qt modules of qtbase.
In particular, qtsvg adds imageformat plugins that are supposed to be
picked up by qtbase's QtGui module when linking a project against a
statically linked Qt.
${install-prefix}/lib/cmake/Qt6Gui/Qt6GuiPlugins.cmake missed the
include statements for qtsvg's plugin config files and operated on a
fixed list of plugins, all from qtbase.
Apart from that, the Qt6::Gui target's property QT_PLUGINS did only
contain the qtbase plugins.
This patch fixes the situation in the following way:
1. All Qt6*PluginConfig.cmake files in
${install-prefix}/lib/cmake/Qt6Gui are detected and included.
2. From those file names, the target names of the plugins are
deduced. This is safe as the file name of those generated files is a
direct result of the plugin's target name.
3. The QT_PLUGINS property of the module is updated with the detected
plugin target names.
Fixes: QTBUG-89643
Change-Id: Ifc3c39aa9948277ead5ebb209ec5eff64746308b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
'qt_manual_moc' doesn't provide include paths for 'moc' command to
substitute required macros. This change adds the
'INCLUDE_DIRECTORIES' and 'INCLUDE_DIRECTORY_TARGETS' arguments to
the 'qt_manual_moc' function.
If 'INCLUDE_DIRECTORY_TARGETS' is specified, 'qt_manual_moc'
collects 'INTERFACE_INCLUDE_DIRECTORIES' of provided targets and
uses them as the 'moc' include directories.
Change-Id: I58c8887dae3ca2484574c5e12e2cbd47f5bd3648
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Just like config_module_name is appended by "_private" in the case of
internal module pri, replace module_includes with the private one.
It fixes the issue where a pro file that uses an internal module pri
does not build due to missing paths to private headers.
Fixes: QTBUG-89961
Change-Id: Ice16a1e9f709d29454f1ddf5b954673cc06a88bb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jaeyoon Jung <jaeyoon.jung@lge.com>
Make sure to react on failed syncqt runs during the CMake run.
CMake will now report something along this:
```
syncqt couldn't parse .../qt5/qtbase/sync.profile: Can't modify modulus (%) in scalar assignment at .../qt5/qtbase/sync.profile line 25, near ");"
CMake Error at qtbase/cmake/QtModuleHelpers.cmake:192 (message):
Failed to run syncqt, return code: 255
```
Change-Id: I575a5fc926c547b6b633583e5d675f7e35beb734
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When building a Qt module against an installer-provided Qt on macOS, the
module pulls in the headersclean feature that creates the *_header_check
targets. Those targets try to compile the public headers of the module,
and the compilation command contains the -iframework argument. That
-iframework argument is supposed to point to the directory where the Qt
libs are installed. However, it pointed to the original
CMAKE_INSTALL_PREFIX of the machine where Qt was packaged.
Use the QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable instead
that contains the real installation location, even for an
installer-provided Qt.
Pick-to: 6.0
Fixes: QTBUG-90402
Change-Id: I27de8b3cc816488c2716042383b334d5c421452d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move UNICODE and _UNICODE definitions from the public Qt::Platform
target to the private Qt::PlatformCommonInternal target.
Fixes: QTBUG-89951
Change-Id: Ib4c1c4cab74acda0a43c4ddb3cffd3954393dc89
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace package _LIBRARIES by _LIBRARY and _INCLUDE_DIRS by
_INCLUDE_DIR. Move find_package_handle_standard_args for Oracle and DB2,
since this call should set _FOUND variable but not separate condition.
Fixes: QTBUG-89866
Change-Id: I54be2c2c4d7ba4b849a27139702861ecd937c444
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
To be able to link a Release user project against a RelWithDebInfo Qt we
set several IMPORTED_*_RELEASE properties in
the *AdditionalTargetInfo.cmake file of each Qt module.
The EntryPoint module however is a bit special as it is an
INTERFACE_LIBRARY linking publicly against a static
library (EntryPointimplementation). Its *AdditionalTargetInfo.cmake file
was almost empty, because qt_internal_export_additional_targets_file was
called before EntryPointImplementation was set up. Also,
qt_internal_add_module, which calls
qt_internal_export_additional_targets_file, does not know that we want
to export the EntryPointImplementation target.
We fix this by telling qt_internal_add_module(EntryPoint) to not
generate the *AdditionalTargetInfo.cmake file and call
qt_internal_export_additional_targets_file later to take the targets
EntryPoint and EntryPointImplementation into consideration.
qt_internal_add_module learned the option NO_ADDITIONAL_TARGET_INFO to
turn off the generation of *AdditionalTargetInfo.cmake files.
Pick-to: 6.0
Fixes: QTBUG-90039
Change-Id: I68ec7125b538a57567035e7adb8dac3b213f95e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QtBuildInternals config package file gets processed before feature
evaluation occurs. That means INPUT_pkg_config may be defined, but the
corresponding FEATURE_pkg_config variable won't have been set/updated
yet. Do this check locally because the availability of a number of
features is conditional on whether pkg-config is available.
Change-Id: I6030eb380ee0c630ffbe5db5eed397a46227c7f6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add an optional argument to store the report command while feature
evaluation-only stage. This is necessary, because according to the
actual feature evaluation process, evaluation happens only once and it's
impossible to record any command during the evaluation-only stage.
Fixes: QTBUG-90319
Change-Id: I215fbe0a28a2661cd2d97d253b2e2c787d295cbd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Functions in QtFlagHandlingHelpers.cmake try to update the CMake cache
variables for compiler and linker flags. These were using the current
value of those variables and writing the modified ones back to the
cache every time CMake ran. If a toolchain file sets or modifies any of
these variables, that updated value is used and written back into the
cache instead of the original cache variable's value. The next time
CMake executes, the toolchain file re-applies the same change and the
variable grows longer each time with flags repeated. With Ninja, this
causes a complete rebuild every time CMake is re-run. The Android NDK
toolchain file is one example where this behavior is triggered (the
fault is shared, one could argue that the NDK should only be setting
..._INIT variables, but that's out of our control).
Another related bug in the previous implementation was that the flags
used to build after the first CMake execution could be different to
those used for all builds after the second and later CMake runs. This
is because the CMake cache was being updated, but not always the
calling scope of the functions that modified them. If a toolchain file
set any of the compiler or linker flag variables as non-cache
variables, then updating the cache variable would have no effect on
the calling scope. The non-cache variable would continue to take
precedence for that scope for that run. The next time CMake executes
though, the updated cache variable would now have been used by the
toolchain file and the change *will* be part of the non-cache
variable's value.
The above are examples of why you should try to avoid updating these
cache variables from project code. We could leave the cache alone and
always update only non-cache variables, but then a developer looking
at the cache may wonder why the values they see there don't match the
values being used in builds. Or worse, they think the cache values
are being used and don't realize the builds are using something
different. Ultimately, we have to choose which downside we are happy
to live with. The changes here preserve the previous intent of
updating the cache, but it's still a bit fragile.
Fixes: QTBUG-89821
Task-number: QTBUG-85992
Task-number: QTBUG-86866
Change-Id: I8a16753e159bde338e6d2e5dd2ce91fc8ac5c39d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Ubuntu 20.04 is a supported platform and comes with CMake 3.16. The
current state of the Qt build works fine with this CMake version, mainly
because the default build on Linux is single-config.
For multi-config builds we have higher version requirements as
documented in cmake/README.md.
This lowers the barrier for users using single-config builds who don't
want or cannot upgrade to CMake >= 3.18.
For Ninja Multi-Config builds, which were introduced by CMake 3.17, we
yield a warning that 3.18.3 is the lowest supported version.
Pick-to: 6.0
Change-Id: Ia918b9f2b494508e86301ffc0e138d3ad4dbaf86
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
CMake <= 3.19 adds the '-fno-fat-lto-objects' compiler flag
unconditionally when CMAKE_INTERPROCEDURAL_OPTIMIZATION is enabled.
This is fine for shared libraries but static ones need the opposite
compiler flag.
Task-number: QTBUG-89426
Pick-to: 6.0
Change-Id: Ie5f48178803a270f6d94408f7a8e85d379eb123c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since test command variable may contain quotes, there is a warning
in generated test wrappers related to 'message(FATAL_ERROR', that
should display full command in log in case of error. To avoid any
complicated quoting of command to only display it, join command into
single string in wrapper script and pass resulting variable to
'message(FATAL_ERROR'.
Pick-to: 6.0
Change-Id: Ie990fc0b0bf2c19b119c7c4e2aeec092e5200103
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use upper-level document build directory for generated .qch files. This
avoids copying of .qch with html documents and duplicating them in
the installation directory.
Pick-to: 6.0
Change-Id: I63b2de0047005419d352ea259dec6f17a826a477
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In latest Oracle Instant Client releases for windows the OCI library
name is 'oci.dll'. Add it as option to find_library call.
Change-Id: I6e6f4a998207d16583a380c1bd95db857051606b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add explicit error, if multi-config build is requested, but selected
generator doesn't support it.
Fixes: QTBUG-88287
Pick-to: 6.0
Change-Id: I6dba589bb59ad69fa07221c657df272ec75c359b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add output of feature condition error at the end of configuration
summary. Introduce qt_configure_add_report_error that may be used
to add error to end-point configure report without actual
configure interruption.
Fixes: QTBUG-88282
Change-Id: Idcf478da863ae6507438eb3370927d7d1f01e071
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 642ee46f98.
Reason for revert: Issue when command_count is actually 0
Pick-to: 6.0
Change-Id: I1b2603f25b56e3bd50cfc22a08925930ad231498
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Use LESS_EQUAL condition since qt_configure_command_count stores last
added command index but not actual count
Fixes: QTBUG-88054
Pick-to: 6.0
Change-Id: I8112820f9885bdad5a786a4f6b4890d8f2fbe14b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Use the QT_MKSPECS_DIR instead of QT_SOURCE_TREE to find out the
location for the testserver feature's data. QT_SOURCE_TREE points to
qtbase source location, which may not be always available. This allows
to use this feature by projects outside of qtbase.
Task-number: QTBUG-85034
Change-Id: If7fa6ef95777be9acf35d36f8d99776bf9568a79
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Introduce a new QT_TESTSERVER_COMPOSE_FILE variable for setting a custom
docker compose file path, which can be set by projects outside of qtbase
(e.g. QtCoap). If the variable is not set, fallback to the compose file
located in qtbase.
Task-number: QTBUG-85034
Change-Id: I4c0c9b161cad9787b089ef7e9da2aa00352a9159
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
'QT_HOST_PATH' indicates that we use crosscompilation toolchain
to build project. In this case 'Qt6Config.cmake' loads
'Qt6HostInfoConfig.cmake' from host QT_HOST_PATH, that defines
correct paths to host tools.
Replace hardcoded paths for host tools by paths recorded
in Qt6HostInfoConfig.cmake.
Correct conditions for QT_HOST_PATH, evaluate it explicitly as
string, but not as boolean expression.
Fixes: QTBUG-86557
Pick-to: 6.0
Change-Id: Ib52bbd32478051d019a932dcb1f735e2d4aacfbf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
With Ninja Multi-Config, QMAKE_LIBS_FOO_DEBUG and QMAKE_LIBS_FOO_RELEASE
are generated, if their values differ. In that case we did not create an
empty QMAKE_LIBS_FOO assignment. That, however, is needed to make the
library 'foo' known to qmake_use.prf.
This amends bd98ba0d17.
Fixes: QTBUG-89387
Change-Id: I80e23746e6ba6ff7f5f4186116232395814cee15
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Unset all QT_FEATURE_foo values for every build.
If any of FEATURE_foo is different of QT_FEATURE_foo, mark whole Qt
build as dirty. Reset FEATURE_foo for dirty builds to the calculated
value if it doesn't meet its condition.
Set Qt module as NOT FOUND if its target was not created during
configuration.
Main issue with this approach are generated files, that became trash
once the related features are disabled. This especially affects features
that enable/disable Qt modules. FooConfig.cmake files are created and
generate lots of warnings if feature was disabled. We may introduce a
module cleanup procedure at some point.
Fixes: QTBUG-85962
Pick-to: 6.0
Change-Id: Id71c1edb4027b24c6793063e40cc9d612c24ebce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Build qtbase with -DFEATURE_static_runtime=ON, and then separately build
another module, following build error occurs:
error LNK2038: mismatch detected for 'RuntimeLibrary': value
'MT_StaticRelease' doesn't match value 'MD_DynamicRelease'.
That's because all the sources in this module are compiled with 'MD'.
When separately building a module except qtbase, FEATURE_static_runtime
is not exist in cmake cache. So we should use QT_FEATURE_static_runtime
instead of FEATURE_static_runtime in qt_set_common_target_properties.
Additionally, adjust the indentation.
Pick-to: 6.0
Change-Id: I2cf4737db9d3e8533570039a66c7d277d62a8d14
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When using MSVC compiler and -DFEATURE_static_runtime=ON, qrc_foo.cpp
and qtentrypoint_win.cpp are still compiled with '-MD' or '-MDd' flag,
which will cause following warnings and other possible problems:
warning LNK4098: defaultlib "MSVCRT" conflicts with use of other libs;
use /NODEFAULTLIB:library
Pick-to: 6.0
Change-Id: I6794930a64e9cff4dc1c9632fc3fc64227848af0
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The scripts that are used by Android test VMs are now located in qtbase
and are not easily usable by other modules. To fix that and allow other
modules to use those scripts, we install them with cmake into libexec.
Task-number: QTQAINFRA-4052
Pick-to: 6.0
Change-Id: Ibdd3658fd9fe7e007104a85d9999028a2de99a33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Wrap benchmark executable target with cmake script to run it on windows
without necessity of environment variables set.
Move common logic related to test and benchmark environment to
'qt_internal_collect_command_environment' function.
Make error message of wrapper script a bit more verbose.
Amends 61d5b01972
Task-number: QTBUG-89076
Pick-to: 6.0
Change-Id: I6ad3a027dc071176070cf3af4cf306f20d652039
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Refactor test adding procedure. It's expected that for each new
platform we prepare test executable and arguments first and then
pass them to common test adding section.
Rename '_qt_internal_wrap_test' to 'qt_internal_create_command_script'
Rework paramerters handling of 'qt_internal_create_command_script',
make them named.
Add 'qt_internal_create_test_script' to add tests and wrap them using
'qt_internal_create_command_script'.
Amends f19266bd02
Fixes: QTBUG-88053
Pick-to: 6.0
Change-Id: I812f4a295005bf3a85cdcb5b8c41180f8249dc96
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt-cmake-standalone-test would be looking for the config files under
the target machine install prefix instead of under the staging prefix
on the build host.
Change-Id: I29850af6d8fe502f4944f689ec10539d17ccdcb9
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use 'separate_arguments' to explicitly split arguments from environment
that form 'COMMAND' for execute_process. Enclose using bracket syntax
arguments, that propagated to wrapper script as pure strings.
Amends f19266bd02
Pick-to: 6.0
Change-Id: I858ddff7efa281f9cecfda656a02e1fd12361758
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was needed, when the mkspecs directory was not present in the
non-prefix build directory. That's not the case anymore.
Pick-to: 6.0
Fixes: QTBUG-89182
Change-Id: I2b04c2d857b0af324e1d7c41ed1934a62275d6f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no point in generating cpp files containing Q_IMPORT_PLUGIN()
macro calls for non-executable targets like modules, plugins and object
libraries in a static Qt build.
It causes unnecessary compiling of 10+ files for each of those targets.
In a static Qt build, plugin imports should only be done for executables,
tools and applications.
Pick-to: 6.0
Change-Id: Ied90ef2f6d77a61a093d393cfdf94c400284c4f0
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Disabled by default as they are currently not being built and many are
not working properly, this will allow us to start using them again.
Change-Id: I823368d04e9fde2beccabedc3ca15efd1f355bfb
Pick-to: 6.0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In some case CROSSCOMPILING_EMULATOR property is not INHERITED and is
set to 'NOTFOUND' by get_test_property. Force it to empty string in
this case.
Add missed 'name' argument to '_qt_internal_wrap_test'. 'name'
previously was used from parent scope.
Pick-to: 6.0
Fixes: QTBUG-88053
Change-Id: I5286bcb9b11659f638e178ce52172dfee994fc34
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add custom targets with '_benchmark' suffixes to make run of
benchmarks using generators possible, e.g.:
$ ninja tst_bench_qudpsocket_benchmark
Extend '-[no]make' option to pass benchmark. Rework
'-[no]make' processing to unify these options processing.
Also looks like it doesn't make sense to enable benchmarks without
having test enabled. So '-DQT_BUILD_BENCHMARKS' enables test as own
dependency automatically.
Task-number: QTBUG-89076
Pick-to: 6.0
Change-Id: Ieee9eadaf6d75a1efec120242d6eb786ace1b071
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Wrap Qt tests to handle TESTRUNNER and TESTARGS environment variables.
Variables are handled according to qmake build procedure. All test
now are wrapped by generated CMake script.
Fixes: QTBUG-88053
Pick-to: 6.0
Change-Id: I339977ce6ce11ddd38a4bf0bd26eb8f2ae463ba3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We want to remove the Qt .pro files for projects, except examples,
because examples are still meant to build with qmake.
To not lose coverage on examples built with qmake, add instructions that
will build the qtrepo/examples folder with qmake when the CMake
configuration has -DQT_BUILD_EXAMPLES=ON.
This means that such configurations will build examples both with CMake
and qmake.
Aside from making sure that our examples will still build with qmake, it
will gives us some some coverage that a CMake-built qmake works
correctly.
Implementation-wise, add new instructions files that can call qmake and
make depending on configuration and target type.
Pick-to: 6.0
Fixes: QTBUG-85986
Change-Id: Ie8f4cbcda03c94da2aef455e32f48dad41a4bdb0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The qmake build system defines _CRT_SECURE_NO_WARNINGS in
mkspecs/features/qt_module.prf, the cmake build system should do the
same thing in qt_internal_add_module().
Adding this definition can avoid warnings like:
warning C4996: 'strncpy': This function or variable may be unsafe.
As a special case, Bootstrap uses add_library() instead of
qt_internal_add_module(), so _CRT_SECURE_NO_WARNINGS should also be
defined in src/tools/bootstrap/CMakeLists.txt.
Pick-to: 6.0
Change-Id: Ic82193d177f82785fd84948efa78c49ca8d8db46
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I'll preface by saying, it's not clear to me why the behavior is
different.
Our qt_run_config_test_architecture function builds a target
executable, and then uses file(STRINGS) to try and parse out some
magic strings that we expect the executable to have (architecture,
abi, etc).
In qmake this was done by matching with a regular expression ending on
a \\0 null byte character.
In CMake, we do a string(FIND) and string(SUBSTRING until the end of
the line) on a *line* returned from file(STRINGS). Notably, I did not
find any regexp syntax provided by CMake to try and match a null byte
character.
Note the docs for file(STRINGS) implies to me that *lines* are
detected by looking for newline characters '\n'. The docs also
mention that binary data in the file is ignored. What's binary
data though?
If you open the executable with a hex editor, at least on macOS, the
strings we are interested in are indeed separated by null byte chars,
not newline chars.
On most platforms file(STRINGS) did end a line on the null byte
character.
Except, for some reason not when building Qt for the oss-fuzz project
with clang under Docker.
Calling message() on one of the lines prints a very long string with
null characters seemingly replaced with semicolons, and of course the
matched architecture string is wrong and fails configuration.
For *some reason*, if I add a "REGEX ==Qt=magic=Qt==" option to the
file(STRINGS) command, the captured output lines don't contain
semicolons even when building for oss-fuzz.
The extracted strings are then correct, and configuration succeeds.
Use the REGEX option workaround, with the aim to quickly fix Qt
building for oss-fuzz for 6.0.1 release.
Pick-to: 6.0
Fixes: QTBUG-89047
Change-Id: Iad11c1090c1187aadd39082f196050bf3290df95
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QMake libraries that contain dashes are referenced by QMAKE_USE as is,
but the corresponding QMAKE_LIB_<NAME> variable must be normalized to
contain underscores.
Example from the qmake build:
./mkspecs/modules/qt_lib_waylandclient.pri
11:QT.waylandclient.uses = wayland-client xkbcommon wayland-cursor
./mkspecs/modules/qt_lib_waylandclient_private.pri
12:QMAKE_DEPENDS_WAYLAND_CURSOR_CC = WAYLAND_CLIENT
13:QMAKE_DEPENDS_WAYLAND_CURSOR_LD = WAYLAND_CLIENT
15:QMAKE_LIBS_WAYLAND_CURSOR = -lwayland-cursor
Pick-to: 6.0
Change-Id: If31bd45764d52f97d80d6388503008dc1ffb16ab
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Which is probably the direct port of -nomake XXX, as qmake
always offered the way to build tests/examples/etc. after
configuring without, while cmake doesn't.
Pick-to: 6.0
Change-Id: I85b039e56cde3ddfaf661385100d3c3a8cc2ac16
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those entries were always empty. The INTERFACE_QT_MODULE_USES property
was never set.
Map each public dependency to its qmake lib name and place this value
into the module's QT.<module-name>.uses variable.
Take into account the "_nolink" target modifier and translate it to
qmake's "/nolink".
Pick-to: 6.0
Fixes: QTBUG-88951
Change-Id: Ib6ef65b842a1fe1da3ade55867583343b4ee76ee
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rename QT_QMAKE_LIB_TARGETS_foo to QT_TARGETS_OF_QMAKE_LIB_foo, because
we want to introduce the counterpart QT_QMAKE_LIB_OF_TARGET_bar in a
subsequent commit.
Pick-to: 6.0
Task-number: QTBUG-88951
Change-Id: I33f00f4fe65c5977da6e74c632ebeab3b891c89a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a qmake lib 'foo' that doesn't have entries in
QMAKE_LIBS_FOO. Then we must not discard this entry in the generated
module pri file, because otherwise any attempt to QMAKE_USE 'foo' will
fail with the error message "Library 'foo' is not defined.".
Pick-to: 6.0
Task-number: QTBUG-88951
Change-Id: Ibed283857f5f66b1b79459fe7b7cf06c7ce0691d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add '_qt_internal_dump_expression_values' function that dumps all
values evaluated by 'qt_evaluate_config_expression'.
'_qt_internal_dump_expression_values' doesn't evaluate undefined
features, only collect actual values.
Fixes: QTBUG-88476
Pick-to: 6.0
Change-Id: I9d09ffbd9f9fa91bc4f36536c58e7f118b06f9b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Despite being installed in the the binary directory, this
CMake snippet cannot be executed.
Pick-to: 6.0
Change-Id: Ibfd31e51184f0688d19ac063804cc200c95555a7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before this change, the prl files always assumed that resource object
files are installed into $qt_prefix/lib when doing a prefix build.
That was true for qt_internal_add_resource calls, but not for
qt6_add_qml_module and qt6_target_qml_files.
Change qt_internal_record_rcc_object_files to take a new required
INSTALL_LOCATION argument. The argument takes a path relative
to CMAKE_INSTALL_PREFIX.
Modify __qt_propagate_generated_resource to save the relative path of
the generated resource source file, which will be used in the
computation of the final resource object file location.
This is needed because the Qml resource functions place the source
files in a different directory layout, e.g. .rcc vs .qmlcache
Modify qt_generate_prl_file to prepend $$[QT_INSTALL_PREFIX]/
instead of $$[QT_INSTALL_LIBS]/ for the resource install paths.
A follow up patch is done in qtdeclarative to pass the new
INSTALL_LOCATION argument from the Qml CMake functions.
Amends f9dcade5e7
Task-number: QTBUG-87702
Task-number: QTBUG-88425
Change-Id: Id17bb517b4cb5d00911bfd10a728ba4e0d44871b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 54d0ca93bca78f8fd31b6761f078e7a96283f183)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Follow the pattern recommended in the CMake docs for the $<JOIN:...>
generator expression. Wrap it in a $<BOOL:...> genex so that if a
target's INCLUDE_DIRECTORIES property is empty, we don't add a
stray -I with no directory following it. This fixes the following error
when running qdoc:
qdoc: Missing value after '-I'.
Pick-to: 6.0
Task-number: QTBUG-88838
Change-Id: Ie3ef2625fbb29cc501f7fc22ff7a9cc8ac548322
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If CMake version is 3.19 or greater, use cmake_language(DEFER CALL)
for Qt internal scope finalizers, instead of the homegrown
implementation.
Apart from not depending on the hacky homegrown solution, it
significantly improves the readability of --trace-redirect logs.
Pick-to: 6.0
Task-number: QTBUG-77377
Change-Id: I5ce374bb313865662c536826e86052bc762438b9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On DLL platforms, the value of QMAKE_PRL_TARGET should be the import
library (foo.lib), not the actual DLL (foo.dll). The genex
TARGET_LINKER_FILE_NAME provides exactly that.
Fixes: QTBUG-88864
Pick-to: 6.0
Change-Id: I553930bb840007772fe8f4612f95e0e320f54107
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before CMake 3.19, we are not allowed to query non INTERFACE_ prefixed
property names from INTERFACE libraries. And it was the wrong thing
to do as well. Prefix the properties with INTERFACE_ as appropriate.
Don't try to add INTERFACE_COMPILE_DEFINITIONS from header only
modules to the headerclean compile commands. This causes configuration
issues with UiPlugin in qttools. Fortunately it seems that qmake
doesn't do that for 'header_module's either.
Finally don't query for the FRAMEWORK property on the passed target
(INTERFACE libs can't be frameworks). Instead just query if the whole
Qt build itself is a framework build.
An issue was discovered regarding QT_NO_ENTRYPOINT genexes breaking
headersclean add_custom_commands for UiPlugin in qttools. To avoid
this the property was renamed to all lower case in
6ca66de9120537134b63d42de6c53c6e5834e8f3. This avoided the immediate
issue, but it's possible it might resurface in the future with a
different property name that wasn't renamed. In particular I thought
it might happen with QT_NO_UTF8_SOURCE but it didn't.
In case something like that happens again, the two possible solutions
are to bump minimum CMake version requirement to 3.19 (where upper
case property names are allowed to be queried from INTERFACE libs) or
to implement recursive include directory fetching similar to our
qt_internal_walk_libs implementation.
Pick-to: 6.0
Task-number: QTBUG-86053
Task-number: QTBUG-82615
Change-Id: I7815d555ec9ea049a8fd40f2a2f072dcb9f5e9c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Query the include dirs from the INTERFACE_INCLUDE_DIRECTORIES property
when generating docs for an INTERFACE library.
Amends 2db41fefa0
Pick-to: 6.0
Task-number: QTBUG-88838
Change-Id: Ic8a454ba66b2dbc59bad883e1e0d38ebb26d0370
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Restore 'QT_STAGING_PREFIX' logic when generating
'qt-cmake-standalone-test'. Relative paths now calculating depend on
'QT_STAGING_PREFIX'. For prefix builds QT_STAGING_PREFIX should be
prepend to '__qt_cmake_standalone_test_path'
Fixes: QTBUG-88764
Pick-to: 6.0
Change-Id: I655c60847f2ab872948cfe9aedc27835e5cc4fb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...and include it in QtBuild.cmake.
Commit e8d8b1a5e4 added two different code paths to include
QtBuildInternalsAndroid.cmake.
This was needed, because:
In a top-level build, we must not include files that are not yet
installed. We have the source tree available, and
"${QT_SOURCE_TREE}/cmake" is in CMAKE_MODULE_PATH.
We can use the "module syntax" of the include() command.
In a per-repository build, when building against an installed qtbase, we
must not include files of the source tree, because that's not guaranteed
to be available. However, Qt6BuildInternalsConfig.cmake is installed,
and we can directly include QtBuildInternalsAndroid.cmake, which is
right next to it.
We can circumvent this whole issue by moving the Android-related
functions out of the Qt6BuildInternals package and including it in
QtBuild.cmake.
Pick-to: 6.0
Task-number: QTBUG-88718
Change-Id: I5192ba19bb77952505c20d053d7285f798d16ac5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Commit 9e0fb9c4fb introduced build
failures in non-top-level builds when building Qt modules against
qtbase.
This was observed on in the CI for CentOS.
Partly revert above commit by taking the old code path for non-top-level
builds.
Fixes: QTBUG-88718
Change-Id: I8926e1e4628ec5bdcea99e10497c1f65c10d072d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 510186a218e63c88100efc38cb1611f122f94570)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Plugins will no longer get .pri files generated in non-static builds.
Header modules are now marked in the .pri files as CONFIG += no_link.
Pick-to: 6.0 6.0.0
Fixes: QTBUG-88221
Change-Id: I06e31fa970ad021261c43ca3acd88055cc4c9555
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
During a top-level prefix build, while configuring qtsvg,
Qt6BuildInternalsConfig tries to include QtBuildInternalsAndroid.cmake
but such files are not copied by qt_copy_or_install() at configure
time.
We need to use the "module" form of include() to take CMAKE_MODULE_PATH
into account. Then QtBuildInternalsAndroid.cmake can be loaded from the
source tree.
The include's current form was introduced in commit
3cb9ee3a5b without further
explanation. Assuming an accidental change.
Pick-to: 6.0 6.0.0
Task-number: QTBUG-88460
Change-Id: If06ac715fae3c2bebbeffca44b7e07265ffb0f71
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move 'INPUT_' variable detection logic out of
'qt_feature_set_cache_value' function. Use 'INPUT_'
variable to enable/disable related 'FEATURE_' in case if
'FEATURE_' is not defined.
Fixes: QTBUG-88501
Pick-to: 6.0 6.0.0
Change-Id: I1162ac0fb562036898a37b52c3f80229ec8a0970
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a target for each level-1 subdirectory in a module. Ninja already
generates phony targets such as "qtbase/src/all", but those are not
available in e.g. IDE integrations of CMake. With this addition, targets
like qtbase, qtbase_src, and qtbase_tests are available in IDEs.
Pick-to: 6.0 6.0.0
Change-Id: If1c3369e9413b3ce127e68c443d4d22949708d5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For shared build, Qt6BundledHarfbuzz.lib and Qt6BundledPcre2.lib are not
installed. But their pri files(qt_ext_harfbuzz.pri, qt_ext_pcre2.pri)
and debug info files(Qt6BundledHarfbuzz.pdb, Qt6BundledPcre2.pdb) are
still installed. These files should not be installed too.
Pick-to: 6.0.0 6.0
Change-Id: I3e54bec01d94ee3897b485a982d01b24edc602aa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Updates due to newer compiler version in QNX7.1
Task-number: QTBUG-88300
Change-Id: If9bbc08d49a077d80174a1807e069b5d4ef61c0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use lowercase underscored property names. This ensures they will
continue to work even for INTERFACE libraries if it ever comes to
that.
Change-Id: I5281070f25c1eb9f591c79af8b7fa6169c7c0fb7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This function will be used by qtdeclarative CMake functions to record
resource object file information for Qml-specific generated resources
(like the ones containing qmldir and qml files).
Task-number: QTBUG-87702
Change-Id: I17c295821775d005dea82d9fbdf83d7ee613f615
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CMake build of Qt intends to improve the developer experience in
regards to static Qt builds and Qt resource files. Specifically with a
CMake build of Qt, Qt developers don't have to manually call
Q_INIT_RESOURCE anymore.
For details see the following commits
e343affd63e817ac3d684ab5432081
The last commit's implementation is incomplete though.
To ensure successful linking, each target's prl file should contain
not only the resource object files that are assigned to the target,
but also all resource object files of the target's dependencies.
To achieve that, qt_collect_libs will now recursively collect all
resource object files assigned to the QT_RCC_OBJECTS property of each
dependency.
Note this implementation is still incomplete. We do not export rcc
object file information in the CMake Targets files.
That means that when configuring qtdeclarative in a
non-top-level build, the generated Qml prl file will not
contain references to Core's mimetypes resource object file, etc.
So with the current change, only the object files that are part of the
current CMake configuration build are tracked.
Exporting the resource object files locations proves in a format
usable for prl files proves to be difficult (due to CMake not
supporting exporting genexes in random properties) and will have to be
addressed in a separate change.
Amends 4ab5432081
Task-number: QTBUG-88425
Change-Id: I546655bdfdf7aa86a8df9aadfc054fa415130a33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Refactor the function in preparation of processing rcc object files.
Introduce 2 new functions to get and set values in the memoization
dictionary used by qt_internal_walk_libs.
Modify qt_internal_add_target_aliases to assign the alias names it
creates as properties on the target.
Extract these aliases when available to assign memoized values not
only for the initial library name, but also for its aliases.
When recursively calling qt_internal_walk_libs, make sure to provide a
unique out_var name based on the outer target name, and not just
lib_libs. Otherwise the out_var values would be polluted from
previous recursion runs.
Make sure to check for -NOTFOUND in if() checks so that we reuse
memoized values that are the empty string.
Change-Id: I8fd8e2b0ae14d0ba8f502bc5a764d6e01095001a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
