We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Status for LIBUDEV printed again in the configure output under 'udev ....'
Change-Id: I3e0beca4c6de315dc2dfbdc24d83f4d9cd2b8856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nothing in qtbase uses gstreamer, so this is just a red herring.
Change-Id: I93fb20a70928d84fed8f33ca4c5df38779928f1a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
apparently some awks need the regexp delimiters to be escaped even
within a character list.
Change-Id: I74a77022e134cafa269960c5c88a9a88589f1b95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
but this time without reshuffling it. it's actually easy with awk.
this makes the resulting qconfig.pri cleaner (and thus easier to debug).
and configure needs a few millisecs less to finish. ^^
QMAKE_DEFAULT_INCDIRS doesn't appear to contain dupes to start with.
Change-Id: I9eed2cf853cd15d0d24a885b1c3d69f22ffafb36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the consumers of these variables use the strings for naive text-based
"subtraction", which of course doesn't work particularly well when the
paths contain "../", "./", and trailing slashes.
Task-number: QTBUG-33714
Change-Id: I893c90e6f5c7cf18c9e6cb1e5be825a16509a2a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Don't discard stdout, it might contain important information. For
example, if qmake crashes, the segfault or similar notification comes
to stdout.
Change-Id: I53def75f37f134544922cf01b4f2ba7c903351cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The regular expression does not parse correctly when a device option value
contains the character '=' (e.g. QMAKE_CFLAGS="-D_FILE_OFFSET_BITS=64").
In order to break string at the first equal sign and to simplify code,
use "cut" command as in other places in configure script.
Task-number: QTBUG-33584
Change-Id: I05b474d2ba6bff84c1e40d00475963bab36d94b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This module doesn't make much sense for iOS.
Change-Id: Iadcf3006e1e2bdd97c460e836e91717856cb118c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
These modules don't build for iOS or don't have a backend yet
Also organizing the list a bit while we are it.
Change-Id: Ic72e897325c9478f66af8e8f879fe6342eb327dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added QXcbSessionManager to the Xcb plugin.
QXcbSessionManager inherits from QPlatformSessionManager, it's a port of
QSessionManager as it is in Qt 4.8.
Minor changes also in QPlatformSessionManager and QGuiApplication to
hook it up.
Task-number: QTBUG-28228
Task-number: QTBUG-30011
Task-number: QTBUG-33033
Change-Id: I50b33d05a1e32c5278dea339f693713acc870a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The 4.7 version of the toolchain in the NDK has been
obsoleted by the introduction of version 4.8. The default
can still be overridden if necessary.
Change-Id: I042ded92e50dc5ebc4d54ffccc2e6856fc3edba0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB port is still incomplete and needs Xlib in several places.
The configure script should reflect that and make sure Xlib is present.
Change-Id: I6d81ea6cacef56084cf7ccfbcf908d597aae918f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB platform plugin is the only one that requires Xrender.
Change-Id: Iac2efa31b4b51e38305ee5f635fe38b75c7752de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
To instrument a Qt application or library with the gcov coverage
tool, do `CONFIG+=gcov' in the application .pro file.
To instrument Qt itself with gcov, use the `-gcov' configure
option.
Change-Id: If24e91d95318609b0df1a76ed6d679bd92bcaab2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
the -l* fallback is for adding libraries. it obviously makes no sense in
its negated form.
Task-number: QTBUG-32550
Change-Id: I9f3af9a2fc059ba39987d4b197ed4778cc7f35b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On systems where xkbcommon >= 0.2.0 the output should be
xkbcommon .............. yes (system library)
instead of
xkbcommon .............. yes
Change-Id: I5807946e61814d414a68a15ad96c91f25c9482ee
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead the module decides now itself whether it supports iOS or not, because
soon it will enable itself :)
Change-Id: I4802441f0a01ed62966a7a0e66f5a8ccfe843cb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtPlatformSupport fails to build if EGL support is enabled but OpenGL
isn't. It tries to compile eglconvenience, but qplatformopenglcontext.h
is empty (#ifndef QT_NO_OPENGL).
It makes no sense to have EGL with no OpenGL ES, so make sure we don't
try it.
The current test to disable EGL if OpenGL desktop is active is upside
down. With -opengl desktop -no-egl, it would complain that EGL support
was requested.
Task-number: QTBUG-28763
Change-Id: I80c780ec78181f3fa85f43e41be21d1217d76610
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The $AWK variable already contains the best awk version
available. Possible values for this variable are: gawk, nawk or
awk.
Using just awk fails on Solaris with:
user@localhost:~/qtbase$ ./configure -platform solaris-g++
awk: syntax error near line 4
awk: bailing out near line 4
This is the Qt Open Source Edition.
Change-Id: I02a17915e8b27a5ce7e831a1225872cf460b3a6b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The 'local' keyword doesn't exist in Solaris' bourne shell as a
reserved word.
Change-Id: I3270c74f79842ee10481a40a9f82d9fb74aff2e5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
shifts the makefile generation one directory level up.
this allows the top-level configure to leave the makefile creation
entirely to the qtbase configure.
this is not very clean modularization-wise, but consistent with -skip.
Change-Id: I7ee2d2f29f2e6619d61fe9b55faa0bacdf3c44c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the option the user most likely meant is called -nomake.
Task-number: QTBUG-21778
Change-Id: I6d8c4d5a984c929804f49ffc2ac75f6945f76e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
