Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Update URLs in jennifer.xbel and remove frank.xbel, which
has too many outdated URLs
Change-Id: I8cbc1e3988f45230f849e68202780c76cf4353d9
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
xcode variable expansion should be done exactly when xcode is used.
Change-Id: Icea8cb7bf9a51811052789bd66354b1b165127d6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a vestige from an earlier version of the watchos introduction.
amends 57378a108.
Change-Id: I7d15149b94d12d84e041079b563175bd4e385d50
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the opengl feature is defined in the gui module.
Change-Id: Ibf63395729540092ca82ee4ffc4e2ff4971c2a29
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Protection against short reads was already half implemented,
blockSize was being sent by the server but never used by the client.
Also, blockSize was bumped to quint32: If you're in a position where
short reads can happen then quint16 is probably not enough to hold the
size of your data. On Linux I could only reproduce short reads for
messages > 500K.
Change-Id: I191a3d781da1d8a119debbdafae641c8340a1da2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
OpenGL ES 3.1 introduces compute shaders. This patch enables them also
in QOpenGLShader/QOpenGLShaderProgram.
A GL/GLES example using QOpenGLShaderProgram for compute shaders is also
included.
Change-Id: I3951a302d7c2b096548f829b9b4578b5a525c453
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modern platforms such as macOS and Windows support large fancy icons
in the system balloon notification. We just need to pass the icon into
platform plugin.
[ChangeLog][QtWidgets][QSystemTrayIcon] Support custom icons in showMessage()
Task-number: QTBUG-49283
Change-Id: Iaeca36fe1bf350eae34d105549010ecbedf9c0a1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This example uses QProcess which is not available on UIKit platforms.
Change-Id: I126d20369ccf307579a60956de7769e92e17548a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
This is only when the attached MIME data contains text, and we
fall back to rendering that text into a pixmap. It requires
getting the device pixel ratio from the source which, for now,
may be a QWidget or a QWindow. Other cases may exist, but that
would bring more dependencies than desired.
Similarly, it fixes the draggabletext example. Other examples
would require either to get updated pixmaps or change substantially
in order to support HiDPI (e.g., the fridgemagnets example).
Change-Id: I66198214233e3e06c87505744e2aaa9691fe1bb6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
At least with the eglfs platform plugin, the QBackingStore constructor
results in a null pointer access if done before creation.
Change-Id: I2e78e70700fa48499a35c55797e1b962b6e6285a
Reviewed-by: Rebecca Worledge <rebecca.worledge@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- Simplify the code, remove unused members
- Fix the translations of plurals to use %n
- Add tooltip displaying full paths in list
- Add context menu allowing to copy the name and open
- Display the correct slashes on Windows
- Connect the returnPressed() signals of the line edits
- Make the search recursive
- Do not search binary files by checking the mime type
Change-Id: I3663799c88931db1f58c03ea35211e7ab03737ec
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Port to Qt 5 connection syntax.
- Remove unneeded member variables.
- Adapt to screen size.
- Add a tab widget with a hex dump view to the preview dialog.
- Handle conversion errors in preview dialog,
add status label displaying errors and warnings about failures
and invalid characters encountered.
- Fix translated messages.
Change-Id: I916100c903e73d0d2326523753ed7398b1c34df0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Introduce a common header file for client and server;
- Update license headers;
- Fix minor issues.
Change-Id: I3fc42fd5ba32141c702fc6679a27bf0b6a16fd26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use Qt 5 connection syntax.
- Introduce helper function to calculate the square size, remove
the existing 24 pixel limitation since that makes it impossible
to render 20pt fonts.
- Add filter chooser for font filters.
- Add menu and info dialog showing DPI and default fonts.
- Streamline code
Change-Id: I0cd4d0475b5a7ed3c475de7a413abebbe688dfe2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Show QMimeType::genericIconName() to description pane.
Change-Id: I698d07084b6396469686057ea53e2f497fdbe287
Reviewed-by: David Faure <david.faure@kdab.com>
Examples should show idiomatic Qt, and QSignalBlocker is idiomatic
since it's inception in Qt 5.3. Just updating the examples was
forgotten.
This commit makes good for that.
Fix coding-style issues as a drive-by.
Change-Id: If138e87ea2ab7a444599734113f7cc6df11fb42d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
The (example) code used a real to hold 360 / 7, which is of course 51,
discarding the 3/7 that was most likely meant to be kept. Noticed by
Coverity (CID 22364). Use 360.0 instead of 360 to get more accurate
results.
Change-Id: Ifdfbb932589d8ea728710e8b656af651c9f8a7d2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(QT_VERSION % 0xffff00) is useless for now, as QT_VERSION < 0x1000000
(for now). The author of this code probably meant to use bitwise-AND.
But even that is unnecessary as the right shift discards the lower 8
bits anyway.
Change-Id: Ie585843cfb684bc3b6e3fffd145d533b05288dfc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... instead of creating a QDateTime object.
Change-Id: Ib57b52598e2f452985e9fffd145a36911de4fa9a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The signal was connected to the wrong slot.
Regressed in 2fe56e37ed.
Change-Id: I33135fc79c3585dfbe0f6ebc04f819e919ed9ed7
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
DownloadLocation is not writable on some platforms (iOS) in Qt 5.6,
and qt-project.org HTTPS does not work anymore.
Change-Id: I78bfbee1472cd39cd05ec7f846d1195d4fbb1b2c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This enables people to toy around with the option and check
what impact it has.
Change-Id: I8b49c31211cc48721b3326eea48b4e74967b1a92
Reviewed-by: Sérgio Martins <iamsergio@gmail.com>
while they are not built, their sources should be installed as long we
don't delete them completely.
Change-Id: I5e628e96cc9715520cb6e5aadb2cae61d1d03a4f
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
it was not built at all (and didn't build with qt in a namespace), and
consequently was not installed as well.
Change-Id: I24d8ac4dd5d70927c262ad6336e5ee32a0fd003a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
as in other examples which come with plugins, use an additional
hierarchy level which contains the app and plugin subdirs.
Change-Id: I2487755967aa3474c337c8c8af10be49627b63d0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Add command line options to be able to set the QCoreApplication attributes
that influence Open GL context creation and add a status label at the
bottom that displays it besides the QT_OPENGL environment variable.
Task-number: QTBUG-52693
Change-Id: Id9793292596e0feb3da5220fde2e5b2e495f87ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
It's urgent to fix the issue that on Android, it became impossible
to interact with any widget or MouseArea which handles only mouse
events but not tablet events, using the stylus, because stylus events
are sent only as QTabletEvents. Before 5.6 (change
01d78ba86a) they were sent as
touch events, and mouse events were synthesized from those. Whereas
on other platforms, every QTabletEvent is followed by a synthesized
QMouseEvent.
This fix proceeds in the direction that event synthesis should be done
in cross-platform code so that platform plugins don't have to repeat it,
following the same pattern as for touch->mouse synthesis. Just as
in that case, the application can disable it, and the platform plugin
can also report that it's unnecessary for Qt to do the synthesis
because the platform already does.
So QTBUG-51618 is fixed, but QTBUG-47007 requires us to remove the
tablet->mouse synthesis from all platform plugins, because the plugin
does not know whether the tablet event was accepted or not, so it does
not have enough information to decide whether to synthesize a mouse
event. Synthesis has been unconditional until now, which contradicts
what the documentation says: the mouse event should be sent only if
the tablet event is NOT accepted. We can now gradually make this
promise come true.
[ChangeLog][QtCore][Tablet support] A synthetic mouse event will
no longer be sent after every QTabletEvent, only after those which are
not accepted (as documented).
Task-number: QTBUG-47007
Task-number: QTBUG-51618
Change-Id: I99404e0c2b39bbca4377be6fd48e0c6b20338466
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There is access to session manager functions which are not present when
building with -no-sm.
Change-Id: I1c92b4a70f7adb56816877930fb9f55b04ff8940
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
