it is *ugly* to have the binary in the repository.
this adds a few seconds to the windows build, as the configure needs to
be rebuilt, obviously. that's almost negligible.
Change-Id: I40ffde23b3c3af2b6bab3e78cd0a9f433214b563
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
it doesn't serve any puropse (any more?) and it breaks the mingw build.
Change-Id: I02a5e7502586e7e9f5956991498ff602eff66e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
Before -mp and -no-mp affected only projects built with Qt.
There was no way to turn off msvc_mp for the Qt build.
Qt projects can add msvc_mp themselves.
Task-number: QTBUG-23929
Change-Id: I08b9ec762c59d2604635d73396044a74f717728c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This method has been deprecated since Qt 4.2.
QDir::toNativeSeparators() replaces it since then.
Change-Id: I49e6e1bfd50f26aa30134e599ee82067709549a7
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Avoids conflict with macro on Mac OS.
Change-Id: I3426c2dc514240d80996d823b7a552c13a09f99e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
At the moment users of Qt must detect if it was compiled with SSL
support by testing for QT_NO_OPENSSL. This means that any code that is
conditionally compiled this way is tied to the presence of the openssl
backend. This commit makes it possible to implement new SSL backends
during the Qt5 lifetime without breaking this code. People can still
test for QT_NO_OPENSSL if they really need openssl, but if they simply
want to know if there's SSL support at all they should use this define
instead.
In addition, this commit changes the public API headers to use the new
define.
Change-Id: Ib57a71aa65836ac9351f120a487bfeb8009d9515
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
There's no good reason to still differentiate between 'Nokia' developers,
and Qt developers outside of Nokia, inside configure. Just use
-developer-build -opensource -confirm-license.
Change-Id: I8726947dae0c70412eb52bf9d88eda4aa061ef26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.
Fixes link failure when building qtdeclarative with jom on Windows.
Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In a Qt 5 world, these have no relevance, so remove them.
Task-number: QTBUG-23022
Change-Id: I2f52c7aa1fcb8234046dd95b4d702791d20514fa
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
See qcocoaaccessiblity.h for details.
For now only the first level of the hierarchy is
made accessible.
Also add tools/accessibilityinspector which is an
utility for inspecting and debugging the Qt
accessibility tree.
Change-Id: Iff520bec26b3761feb0c2e00471feb379daaa735
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
As windows' fontdatabases also uses functionalities from
qbasicunixfontdatabase it was renamed to qbasicfontdatabase. But instead
of iterating over the font directories' files it uses system calls to
obtain the list of fonts and uses registry values to find the according
filenames to add.
The native font engine was still kept. It can be activated by adding
fontengine=native as platformargument.
Change-Id: I7197bed5d18b8a33d4aa97ce91bfa1cd281b80ea
Reviewed-on: http://codereview.qt-project.org/5839
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Sanity-Review: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
If qtbase was configured to build both debug and release versions of
libraries, it makes sense for any modules we are building to do the
same by default.
Change-Id: Idb5f78a7414b6ed2bacf295ad01f259fca435410
Reviewed-on: http://codereview.qt-project.org/4702
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Otherwise V8 won't be built (there's a contains()
check in src.pro).
Change-Id: Iba65e85baae1e80800e5ca0da49fde8958dfd659
Reviewed-on: http://codereview.qt-project.org/4524
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
uilib includes QtGui and QtWidgets headers, so should explicitly add gui
and widgets in the .pri file.
Change-Id: I5f1e80d1379cb5389287df73d6070fd8ff712a3b
Reviewed-on: http://codereview.qt.nokia.com/4055
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
