the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QString::replace() has no way of escaping capture group references,
so simply disarm double backslashes. of course this is broken, but
we'd need to reimplement it from scratch to fix it properly. "corner
case" ...
Change-Id: I357fbfd22c9c4a68809e5af6efad1de3a95706b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
there is no point in setting the variables already when peeking into
the caches, as that is done in a separate evaluator anyway.
it also makes no sense to have them set while loading the spec itself,
as it's not permitted to do anything with the caches.
so set them at the next convenient point, which is right before actually
loading the caches.
Change-Id: I3717ddf94353dc04e12c52e542f16ed27b578e14
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Allows the macx-xcode mkspec to be a wrapper around other mkspecs.
Since QMAKESPEC can now be set in the spec, we have to ensure not
to append to QMAKESPEC.
Change-Id: Idf33ff38147f14c488f14b426c02d9a739fdaecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Exclusive builds uses setExtraConfigs to apply the particular CONFIG
of each build pass. Unfortunately we were not applying these extra
configs early enough in QMakeEvaluator::visitProFile() for them to
be picked up/usable by default_pre, something that can be useful.
Change-Id: I423a4688250a15f0c1a2cc65a48f0bbc14ad4497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The extra variables only need to be applied once, when we
are loading the pro file (and hence are loding pre files),
not for every single pri/prf that's loaded as a result of that
(which do not load pre files themselves).
Change-Id: I3118694a8eeccf2dc32c4f62df754033fad13528
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It has no effect when the compiler doesn't support it.
Task-number: QTBUG-33952
Change-Id: I23b1fcdf4ec31924b1b59987846f7e0fbf17c6c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
