Make sure complex things in qmake (e.g. function calls, etc.) are
mapped better to cmake. When there is no way to properly map the
qmake construct, then make sure to map everything into one
identifier.
This is to keep the structure of the condition simple.
Change-Id: I6d88e0cb85fce1041bbfdc96604dab7bd4e65856
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Return the current scope's condition, not the total condition from
recursive_evaluate_scope. That is the part the "else" referrs to.
The parent_condition stays identical for all branches, so that should
not get negated.
Change-Id: I0da91483d4d748d01a29ac16890d709d8d659843
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This should somewhat simplify the generated CMakeLists.txt files,
especially in complex cases like corelib or network.
Change-Id: I208c8f99a64cbb6c97d51dd3ae428bb234982202
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix pyls warnings in pro2cmake.py as well as its tests.
Change-Id: Ib8ee1daa9b97735d13c0fde43616daa46de9e171
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Report more error conditions in debug dump and make the output
easier to read in the non-error case by wrapping all strings in
"".
Change-Id: I3c99deda3dfa27dcc0c9ce2800bfb891747e6934
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Having a good representation is nice, but unfortunately very hard: pro2cmake.py
sees just a small part of the entire qmake build system at a time, so the information
it has is incomplete to start with. It is not worthwhile to pass the supposedly full
information around -- which will then need to get de-duplicated again -- considering
that the information is not complete in the first place.
So go back to the simplistic approach we used earsier. That is good enough and does not
suffer from the problem of having multi-part arguments getting messed up when the
scopes get de-duplicated.
Change-Id: I553329650d6b8046f7ad8b1282e3d0c961293a28
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This makes it easier to see what is still missing.
Change-Id: I186abd609f20be680ac0943ac89068f764142a79
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Do not add scopes that are going to get merged into their parent scope
as a child of the parent scope. This leads to the information of the
child scope being duplicated.
Change-Id: If4d6a83b9c9eac477959e7774e9cf65fd4df98e6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Indent the individual parts of a scope relative to the scope itself.
This makes things a bit more readable.
Change-Id: Iffbffd69bc960118f9657a1b7fb488da3c7b48dd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This avoids some includes being done several times: We used to generate
scopes for the include files, add them to our current scope and then
traverse the children of the current scope.
Switch the order to avoid traversing the newly added scopes twice.
Change-Id: Icb9c53c9f54772d3305e0fb121824c23d5469e09
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Ignore include files that go into 3rdparty code. Qt 6 should work
with external libraries, so there is no need to drag in 3rdparty
include directories, etc.
Change-Id: I990f3a8a4983e1458843b4122420b9daec763ccb
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Do not needlessly add () and NOT all over the conditions.
Change-Id: If907357306eb3f8ab5b2878bcad5902171a90476
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Make the output of the project structure debug dump more readable.
Change-Id: Ib80b41f7fdb8e14ff878284c46f3760d84f4f004
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: Ieb33141601c29ec2f3c30c6725179f1fb234e53a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Set new keys in the parent scope instead of just appending to existing
scopes.
Change-Id: I901c3f418429d8aed56acb39b1dbe566c5468920
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: Ice9db97db5bf1fb347bff07bcaf91daac87fa983
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not include the same file over and over again...
Change-Id: Ia0748b9ebe58388549ba23ec7e24ce3d9b738987
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CMake comes with a Find module for this, so use it in src/corelib/configure.cmake
Change-Id: I8f4abcb32fb10513d67c3c959310eefaf7b56d3d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add FindSlog2 and use it in src/corelib/configure.cmake.
Change-Id: I7e6a696a49df568a41ed1224228ab608db2dbb0e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Improve conditions/enable/disable conditions for iconv related features.
These are detected a bit different from what qmake does, so adapt to that.
Change-Id: I7b3e4baf05dc324507f370d7f651a62f29e42a98
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Find the PPS library and use the result PPS_FOUND in configure.cmake where
needed.
Change-Id: I08d3ace421278dc0ae5c3128d4234e6bca906c05
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a way to map individual parts of a feature to new values and use
that also to skip features.
Change-Id: Ibddfcbbf9dfac29d460922e991934997b3e8387b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a comment that a library was removed when running into "QT -= gui"
and similar lines.
Change-Id: I17b7922827f228c6b45e1e6867fdc5e316af3781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Map "qtHaveModule(foo)" in qmake to "TARGET Qt::Foo" in cmake.
Change-Id: I63c251f0f2dfd2e95adc996a83b528e9b4e9636e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This amends c1141ed729b84f2c413975d37c1a91fb235fb14a; I failed to
update the doc-string after some design changes part-way through
developing the function.
Change-Id: Ifb83107153d1c3b5a9dbd0536a3d6ee1fe32922d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This is the squashed diff from wip/webassembly to dev.
Done-with: Peng Wu <peng.wu@intopalo.com>
Done-with: Sami Enne <sami.enne@intopalo.com>
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Started-by: Andrew Knight <andrew.knight@intopalo.com>
Change-Id: I6562433c0a38d6ec49ab675e0f104f2665f3392d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
A few patterns accounted for a substantial majority of the output, so
report these in summarised (and somewhat tidly formatted) form.
Change-Id: I57f8e41d5e68774fe57b01bb295534aa84a2df15
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
We were missing a few languages CLDR knew about; so add them to the
list in enumdata.py (and add trailing commas to lists to make future
additions not need to change the prior last line; python is perfectly
happy with this).
[ChangeLog][QtCore][QLocale] Added support for Western Balochi, Ido,
Lojban, Sicilian and Souther Kurdish.
Change-Id: I0d24cff46a0ae8db48ec1db8762088f877319982
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
We iterate theoretically many sources (albeit there's only really ever
one) for this data, so accumulate instead of only keeping the last
(and initialize it as the list it always ended up being, not a
dictionary, so that this can work).
The form of each token is a locale name, so it may be lang_Script just
as readily as lang_LAND; so parse (and validate) the tags more
faithfully to catch both cases. Abstract that parsing into a function
and use it in both places that need it.
Change-Id: Ibdbc4eafefab6a5ef70646d9fea150f2cb408d05
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
PEP 8 wisely advises against the use of naked except: (unless
re-raising the error).
Change-Id: Ia0dfdb48b330d33ad370bdb9f6b205046aa919da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Neglected in 44b6757fe5
Noted the need for this in a relevant script's instructions.
Change-Id: If69666f1799acebd434034c80b91056cb8777488
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>