QDir::relativeFilePath() doesn't do anything if the path is already
relative, so make it absolute first to force a re-calculation.
the cleanPath() is gone, as relativeFilePath() already does that.
Change-Id: I8f4d0d839db3fe99a608f70916b4b5bd52c56535
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake -project was always outputting a project with subdirs template, because
Option::h_moc_mod was not being properly read, causing addFile() to misbehave.
Change-Id: I2c07aea132f9885eabf188de993b0fabfb352886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
sam added this based on a vague notion of backwards compatibility when
he fixed the function to use the local scope, but it kind of makes no
sense - there is very little reason for accessing the global scope from
within a function. google doesn't find any relevant hits except our
source code, so let's just nuke it.
Change-Id: Ie957bb47b531f7e9b5dfcceb4e09f65dd826b422
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
it produces way too many false positives to be useful.
Change-Id: Iefa423f96fa5574267b1468abb5efc8454ab54a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we would ignore the early read variables and fail to export the super
cache's path to the project.
Change-Id: I3c467802b4af22f73be05b25dbd8ccb6196d28a8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
the feature was implemented for the abld/sbs2 generators only, and is
of course undocumented.
this reverts most of commit e795e61ef93f8080f9938ac49f2fca306644af85.
Change-Id: Ibd1726b036ce6c45f8e678ea996218f774f8aed2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of having a bunch of nested loops, collect into a temporary list
and process it at the end.
Change-Id: I97e5642f7e13f7c7b69eae00833e61cdf46a02ed
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of dumping the variables as we are going, dump everything at the
end. this is potentially useful, as opposed to the previous
functionality which was redundant with -d.
Change-Id: Icf14703cb93e03f7079dfc0266b219ad9c902133
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
values() and variables() get both const and non-const overloads
Change-Id: Idfabea1acc488bf78f24edb831681ee07f0074c4
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the weird debugging feature is not used anyway
Change-Id: I07f481a94f2b2ab2a5b61270f0e00183cefd4cd1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we can rely on only user code needing variable mapping, so apply it only
in the evaluator.
Change-Id: I6fc58e7bcf24cf0fa8783d5341ab1e7b9f001c88
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only place where the two remaining magic values need to be
referencable is doVariableReplaceExpand(), so make a separate function
and use it only in that place.
Change-Id: I6e2fcfa3a4f16727d90ace56eb88fc99ef272ffc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
like the other variables, we can just store it in the hash.
Change-Id: I49ad39dca8d498119b27f16ea4bdc44ae698d72e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this changes the semantics a bit - it will be the datetime of qmake
startup rather than the time a particular file is processed. i'd argue
that this is insignificant.
Change-Id: I75918967bef25038ce54aa81ab03c027384c0268
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it suggests a symmetry to $$OUT_PWD which simply isn't there. the
shorter alias $$PWD is much more popular anyway.
Change-Id: Iefbfd56f1a3e526f15c9d6cd1bf59778be6f2f8d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
$$_PRO_FILE_, $$_PRO_FILE_PWD_ and $$OUT_PWD can be cleanly initialized.
no need for magic.
Change-Id: I2e339d17bae42ecb573c2f82c716f6be15a35b98
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of resolving them on-demand, just initialize the value hash
with them. less magic and faster.
Change-Id: I28cb6c21ae6ae60a33734f62acdef0794420ba8f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a purely internal variable. projects are supposed to
query $$TEMPLATE only.
Change-Id: I32a3aa7012a4fedcf6e77e2e1302ed978baac700
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner than resolving it on-demand, as it avoids statics (with
potential side effects on dynamic spec switching).
Change-Id: I2bc15a4c3108376e1b4a01351875fe0c445ee5d5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's completely counterproductive. just include() the file instead.
i don't think anyone knew about this "feature", so just removing it.
as a side effect this removes the repeated existence check of already
found feature files, as we can use a clean else-if cascade.
Change-Id: I5d38d38d0a897f2e8857ac68d5649fd4367941c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are read before the qmakespec and before the cache, resp.
this will allow moving some hard-wired logic out of qmake.
Change-Id: I6a63050d7798bc30a4add8c009bcd801a29a0deb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this should significantly cut down the time wasted looking for files in
non-existing directories, in particular on windows.
Change-Id: I7ab3523fe8c028e3787ebc78e4543ab04f53448e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this limits references to this variable to its setup and explicit cache
manipulation.
Change-Id: I88dd2418051501abea201f223da7759a15f1c249
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.
Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.
Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.
Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.
Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
more or less QDir::toNativeSeparators(QDir::cleanPath())
Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
