This autotest may fail depending on the version of fonts which are
installed on the system. It has no way to verify if the correct fonts
are installed, and it's unclear from where the correct version of the
fonts may be obtained.
Therefore, disable the test by default unless the user has indicated
that they have a correct setup by setting QT_HAVE_TEST_FONTS=1.
Task-number: QTBUG-20682
Change-Id: I24174520f54af6a9b2c13c9c1347f46555bce3d4
Reviewed-on: http://codereview.qt.nokia.com/2469
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This autotest failure is stable, so it should be marked with
QEXPECT_FAIL, not CONFIG+=insignificant_test.
Note that the test row naming had to be changed, as the test previously
created many rows of testdata with the same name, making it impossible
to skip only the broken rows.
Task-number: QTBUG-20661
Change-Id: Ie38f5dddafe7686e30eaa8ff3445310935d2cd9a
Reviewed-on: http://codereview.qt.nokia.com/2419
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This test unconditionally assumed that SVG support was available.
This is an invalid circular dependency: the test is in qtbase and
depends on qtsvg, which depends on qtbase.
Change the test so that it uses SVG support only if available.
Change-Id: Ia63ce74abdecd4bcf7a4e0714b8cb7c488e17495
Reviewed-on: http://codereview.qt.nokia.com/2426
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test assumed that C++ exceptions could always be caught by the
event loop. This is not the case when the Glib event loop is used.
Skip the relevant portion of the test in that case.
Change-Id: I6a6325c3590c810a5aba28ec98279581dcfaf55c
Reviewed-on: http://codereview.qt.nokia.com/2455
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test assumed that Qt's available image formats could be determined
at compile time. This was never correct since the image formats are
loaded from plugins at runtime; in Qt5 it became a real problem since
one image format (svg) was moved out of qtbase into a separate module,
turning this into a circular dependency: this test in qtbase depends on
qtsvg, which depends on qtbase.
Always check the image formats at runtime instead.
Change-Id: I5e770c5b11276c39910e34f232a2fea0a7abaa8c
Reviewed-on: http://codereview.qt.nokia.com/2457
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Increased thread wait timeout from 3 to 10 milliseconds, for slower or
heavily loaded machines. (There was a previous attempt to improve
stability of this test some time ago by increasing the timeout from 1
to 3 milliseconds.)
Note that this increases the runtime of the wakeOne test from ~5 to ~14
seconds.
Change-Id: Ib556d4c949a6989fe71c11f5dc10feb2ec45c512
Reviewed-on: http://codereview.qt.nokia.com/2458
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Removed some binary compatibility tests written specifically to test a
change introduced between Qt 4.1 and 4.2. Qt 4 and 5 are not binary
compatible, the test no longer makes sense.
Change-Id: I3e8f9b6011105e504c20bedad51af8193b102552
Reviewed-on: http://codereview.qt.nokia.com/2464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest failure is entirely stable, so QEXPECT_FAIL should be used
instead of insignificant_test.
Task-number: QTBUG-20687
Change-Id: I0444e725b436fe93d30cbe54edc673594ca9b9fe
Reviewed-on: http://codereview.qt.nokia.com/2486
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
tst_qfilesystemmodel::sort uses some internal API to affect the sorting
behavior. This means that part of the test must be disabled when
private symbols aren't available.
Change-Id: I2e7b9d7a33cb3e7032bc5380c03fa29ecc84e12c
Reviewed-on: http://codereview.qt.nokia.com/2413
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
These tests assumed that a crashing program will always exit within
five seconds. This is not true in some situations. On our test macs,
enabling crash dumps can easily cause a process to take longer than
five seconds to crash.
Increased the timeout to 30 seconds.
Change-Id: Ifca240ac8d3da1346f33110653ac47de6ba2ab81
Reviewed-on: http://codereview.qt.nokia.com/2407
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
If we do not process the event, q->underMouse may return false in
QGraphicsViewPrivate::centerView (as the QEvent::Enter has not been
received yet.)
It was working before if by luck, the window appears under the cursor.
Change-Id: I9b4497683eae20915680297013a9c21fd6275f4b
Reviewed-on: http://codereview.qt.nokia.com/2385
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
And added a POD QBasicMutex. (QBasicMutex* can safely be
static_cast'ed to QMutex*)
The d pointer is not anymore always a QMutexPrivate.
If d == 0x0: the mutex is unlocked
If d == 0x1: the mutex is locked, uncontended
On linux:
if d == 0x3: the mutex is locked contended, waiting on a futex
If d is a pointer, it is a recursive mutex.
On non-linux platforms:
When a thread tries to lock a mutex for which d == 0x1, it will try to
assing it a QMutexPrivated (allocated from a freelist) in order to wait
for it.
Change-Id: Ie1431cd9402a576fdd9a693cfd747166eebf5622
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
When a table that is related to in a QSqlRelationalTableModel gets
updated in some way (e.g. a new row, or the data is changed) then the
related model could not be updated without recreating the
QSqlRelationalTableModel.
Now, to get around this, select() can be called on the related model to
get it to be updated.
Task-number: QTBUG-7885
Reviewed-by: Charles Yin
Reviewed-by: Michael Goddard
Change-Id: Ic589e840234f3a809bcb112a807a87afe0bc25ca
(cherry picked from commit 2c60a4f67f9fb02f3b711fe749b2f293a07b4e02)
Reviewed-on: http://codereview.qt.nokia.com/2224
Reviewed-by: Charles Yin <charles.yin@nokia.com>
Mark the selection as dirty if an input method event contains a
selection and emit selectionChanged() if it's not emitted by
finishChange().
Task-number: QTBUG-19731
Change-Id: Ief6f06f40071f64dae4db0ba365676c059a39c7e
Reviewed-on: http://codereview.qt.nokia.com/2081
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Test started to fail, complains about outdated SSL certificate.
Task-number: QTBUG-20582
Change-Id: I2622375d9bc7b446dbbc18f72403896c60a8dee1
Reviewed-on: http://codereview.qt.nokia.com/2307
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jonas Rabbe <jonas.rabbe@nokia.com>
This is a generic implementation of the lock-free free list found in
qabstracteventdispatcher.cpp. Use next() to get the next free entry in
the list, and release(id) when done with the id.
This version is templated and allows having a payload which can be
accessed using the id returned by next(). The payload is allocated and
deallocated automatically by the free list, but *NOT* when calling
next()/release(). Initialization should be done by code needing it after
next() returns. Likewise, cleanup should happen before calling
release(). It is possible to have use 'void' as the payload type, in
which case the free list only contains indexes to the next free entry.
Autotest included.
Change-Id: Ifd12a961d47f3d76593c45061f72e55c9b80a43b
Reviewed-on: http://codereview.qt.nokia.com/2160
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Check if the input method removes the selection and force emit
selectionChanged if it sets a new selection.
Task-number: QTBUG-19727
Reviewed-by: Martin Jones
Change-Id: Ic8ea1044d0917aac4e52368f431ac9e5c7db7c56
Reviewed-on: http://codereview.qt.nokia.com/2076
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
A reversed selection will have the same resolved start and end
positions but a different cursor position so testing the end points
alone doesn't guarantee the selection is the same.
Task-number: QTBUG-19456
Reviewed-by: Martin Jones
Change-Id: I516e5a501ec878d673f21e54d688fd2d21b624ef
Reviewed-on: http://codereview.qt.nokia.com/2080
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
The headers are just skipped, information stored in them is ignored.
Merge-request: 824
Change-Id: I48f37757114ed83cd5c92cb3d5a43eeaca4b91b3
Reviewed-on: http://codereview.qt.nokia.com/2108
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
According to the C++ standard, there is no guarantee that
you can cast between function pointers and void pointers
without data loss (section 5.2.10-6).
Change-Id: I27f4d835e4c8ca8ecca0d76cfea9ce34491956bd
Reviewed-on: http://codereview.qt.nokia.com/1995
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
If QT_GUI_PASSWORD_ECHO_DELAY is defined in qplatformdefs.h with an
integer value in milliseconds, QLineEdit and TextInput will display
the last character entered unmasked for that delay period and then
mask the character as normal. If QT_GUI_PASSWORD_ECHO_DELAY is
not defined then the behaviour is unchanged.
Task-number: QTBUG-17003
Reviewed-by: Martin Jones
(cherry picked from commit f9e7aee2019d321edd655bfde7de43f20a106971)
Conflicts:
src/declarative/graphicsitems/qdeclarativetextinput.cpp
tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp
Change-Id: I3683223189b7176e4ef5081ee315c95a0efb9cfe
Reviewed-on: http://codereview.qt.nokia.com/2060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
This requires a fix for QByteArrayLiteral to work too.
Change-Id: I3c2a50ad431d5b0c014a341e675fa54e7b206e70
Merge-request: 27
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1967
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
The problem was that with an empty filename and index of 0, all raw fonts
loaded from data had the same FaceId, and we wouldn't bother to load
another one after doing this once.
This commit introduces a uuid in FaceId to help distinguish them in
that case.
Change-Id: I93655ff07a7d8856af1f854024e207c519f8ed1a
Reviewed-on: http://codereview.qt.nokia.com/1882
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This test was incorrectly assuming that a file named "Makefile" exists.
Also removing the `insignificant_test' mark for Linux.
Change-Id: I318b12f67e0476d6f08d1fc86194ca96f2bdb373
Reviewed-on: http://codereview.qt.nokia.com/1923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was emitting signals from a thread for 15 seconds.
Doing this 10 times should be enough, and way faster.
Also a race made it sometimes wait 15 seconds while nothing was happening,
and then it would still succeed; the new code prevents this from happening.
Change-Id: Ib36785dd8090047c760ddcca44fc805efaef1bd8
Merge-request: 4
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1989
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Update the test after the introduction of QHostAddress::AnyIPv4
in 85136496bc
Change-Id: I3b84e85b6dcefa69bf5953205e288a6f0affb341
Reviewed-on: http://codereview.qt.nokia.com/1873
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Markus Goetz
Instead of using a simple INNER JOIN, like:
SELECT a,b,rel.c FROM table1, table2 WHERE (table1.smthing =
table2.smthing)
which doesn't show row where foreign keys are NULL, allow use of LEFT
JOIN like:
SELECT a,b,rel.c FROM table1 LEFT JOIN table2 ON table1.smthing =
table2.smthing
The trick works also for multi-relational tables.
Just remember to use the new API setJoinMode.
Signed-off-by: DaNiMoTh <jjdanimoth@gmail.com>
Task-number:QTBUG-8217
Reviewed-by:Michael Goddard
Reviewed-by:Charles Yin
Merge-request: 2576
Reviewed-by: Charles Yin <charles.yin@nokia.com>
(cherry picked from commit c4280dbd9bb37cca21d007f5f8b9217f80b44043)
Change-Id: I349f9418e4859923977942add59872b000cac2c5
Reviewed-on: http://codereview.qt.nokia.com/1853
Reviewed-by: Charles Yin <charles.yin@nokia.com>
In Qt 4.8 this generated a warning. For Qt 5 we should no longer
accept file urls without a scheme set. So you should use file://
for local files.
Change-Id: I57789e2b56b712aa4f370aec9437c6febf0d0211
Reviewed-on: http://codereview.qt.nokia.com/1822
Reviewed-by: Markus Goetz
These projects are conceptually not autotests, but more like helper
programs for the tst_selftests autotest. Some of them are expected to
fail, so they should not be run except via tst_selftests.
Change-Id: Iba8e4242e8dad9f92874ae690c9f4d9814758f4b
Reviewed-on: http://codereview.qt.nokia.com/1791
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is meant to be a temporary solution to not hold any further
development. JIRA tasks might be filed for failing tests.
Change-Id: I08a5f5b0cb153e7fd7890b2936ec3bb6b3a0907c
Reviewed-on: http://codereview.qt.nokia.com/1753
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
According to UAX #9, bidiItemize should act as if those characters
don't exist. If we don't, dir and status.eor here may become
QChar::DirBN, thus interfere the result of bidiItemize.
Task-number: QTBUG-19949
Reviewed-by: Lars Knoll
(cherry picked from commit a5c3064439a9f1483565e5d9dfbf0342cd9236f0)
Change-Id: I224cfdf5b38433a31d33b6d944d5770accf74546
Reviewed-on: http://codereview.qt.nokia.com/1631
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
there is no such category in the Unicode specs. the QChar::NoCategory
was a subject of bugs since it was introduced. int 4.6 it's meaning was
limited to mention ucs4 > UNICODE_LAST_CODEPOINT only (which is useless anyways)
in order to preserve the old (wrong) behavior.
fix it now for qtbase
Change-Id: I630534824e071090b39772881e747c1fdb758719
Reviewed-on: http://codereview.qt.nokia.com/1584
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Currently it is only possible to verify a certificate chain when
connecting to a server. This change makes it possible to verify a
chain at any time.
Change-Id: Ib70ad7b81418f880e995f391b82ce59561ededb8
Merge-request: 11
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1509
Similar refactoring as done for QString. Make
shared_null read-only, and add support for
compile time generated QByteArrayData.
Add support for properly reserving capacity.
Change-Id: Ie4c41d4caac7b3b4bb1aef40c1c860a30b82edb8
Reviewed-on: http://codereview.qt.nokia.com/1484
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
RFC 2459 "Internet X.509 Public Key Infrastructure" uses the word
"attribute" for fields in a certificate like common name, organization
etc.
Change-Id: I51e595acbe3e146acf81af21cf48e554fa9490e4
Reviewed-on: http://codereview.qt.nokia.com/1453
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Add methods that return a list of the tags in use in a certificate
issuer or subject. This means that unknown elements of these fields can
be accessed.
Change-Id: I588989e34f541b1d31cc9e97f5a85d1624ece1b1
Merge-request: 18
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1451
This commit adds accessors for both the openssl version number and the
version string. The intention here is to aid debugging by making it
possible for applications to know which version of the openssl library
has been found by the runtime linking code.
Since the version of openssl in use will depend on the installation of
the developer, the test cases merely display the version string and
number rather than verifying that any particular version is in use.
Change-Id: Ieec44f0941f99887c85c2858bab0481722d739e5
Merge-request: 12
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1406
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
