in QDBUSXML2CPP_INTERFACE_HEADER_FLAGS and QDBUSXML2CPP_ADAPTOR_HEADER_FLAGS.
Change-Id: Ibbe812fbe4912acfd2c9721b5193727ae0c0ade3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This increases consistency a lot: all windows and dialogs from a Qt
application will show the app display name in the caption, on Windows and X11.
This helps identifying which app a dialog belongs to, which is especially
useful when the dialog is very generic and shows up unexpectedly.
For compatibility reasons, the app name is added to the caption only
if setApplicationDisplayName() was called -- or if the caption would be
completely empty. The standard Qt4 case (setWindowTitle + no display name)
is unchanged.
Change-Id: Ib284c62c1f4c0bc923e5bc2d10247d95e9aa76c1
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
For two reasons: 1) those operators are gone and 2) the ones that remain
are atomic.
Task-number: QTBUG-28532
Task-number: QTBUG-24627
Change-Id: I1e9d1b076d923546c1ee3d45f312066590f97416
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
They are completely unused in Qt, and are a potential source of
compilation errors in application code.
Change-Id: I6dfe2891f3b2365a30048f99c31e8e3a2425e62b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since QtOpenGL/QGLContext is implemented in terms of
QtGui/QOpenGLContext which has stricter requirements about how it's
supposed to be used, we need to apply these requirements to QGLContext
as well.
This change adds QGLContext::moveToThread(QThread *) and documents it as
a necessity for making a context current on another thread.
Also introduces QGLPixelbuffer::context() to access the QGLContext of a
pixelbuffer, and made QGLWidget::context() return a non-const
QGLContext, since there's no good reason why it shouldn't, and it leads
to less const_cast clutter.
We could have introduced a backdoor in QOpenGLContext instead, making it
loosen its requirements, but that would have made it harder / impossible
to fully support threaded OpenGL in all the platforms.
Task-number: QTBUG-22560
Change-Id: Ibb6f65f342e7c963e80cc42ab5664c5f1cab30b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QSessionManager was already in QtGui, but not usable since the only API
to get to it was still in QtWidgets. Session management isn't related
to widgets, it also applies to QML apps on the desktop.
The virtual commitData and saveState methods have been removed,
given the two signals which exist since 4.2, and an additional
isSessionSaving() method was added instead.
Change-Id: I8099e70df133303e74456706827da21f013fcc6a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Some of them were incorrectly spelled (for a while)
Change-Id: I871968e3bbdd2172f4c4dfb6e74729c05e7e8e01
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These Qt3 legacy application types do not match the application types
available in Qt5. Thus, the decision was to kill the confusing and
mostly useless type enum. Use for example qobject_cast instead to find
out the application type.
Task-number: QTBUG-28093
Change-Id: Ia8cf7c3ea98a3cea27f74760d62e519ea10bce9f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We will in any case not be able to support this in Qt 5, so best to just
remove it to not give any false impressions.
Change-Id: Ib52e86007b9e6483bd973f13502b078792a9fa40
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Print Engine key PPK_SuppressSystemPrintStatus was added in Qt4.1
for Cocoa dialog to suppress the progress dialog. In Qt5 all cocoa
code has been removed and this key is now unused.
Change-Id: I3a91e9651e16f81611a9a736163f76acf9f20096
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Since the behavior of boundaryReasons() method has been changed a lot,
remove the StartWord/EndWord enum values to force the affected code be revised;
StartOfItem/EndOfItem must be used instead.
Change-Id: I3d1d97d2dbe9680d290646d8c3adb5558ca26bd7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In addition to the actual removal of the softkeys API in QAction,
this commit removes some enums related to the softkeys feature:
Qt::WA_MergeSoftkeys
Qt::WA_MergeSoftkeysRecursively
It also removes some "zombie" enums:
Qt::WindowSoftkeysVisibleHint = 0x40000000,
Qt::WindowSoftkeysRespondHint = 0x80000000,
(The only implementation that used these were removed when
qapplication_s60.cpp and qwidget_s60.cpp were removed.)
Change-Id: Ib6fc6d543def4757383d5f19256199d9d190c614
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
There is no reason to emit this when there is no change.
Change-Id: I34f0ceec7c4b0959b77bc5be3ce2c2ad55864598
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Some widgets users could get the picture that nothing has
happened in that area. So lets at least write that something
has been improved.
Change-Id: Ic314ab06d28e687986a8ab472d8b58830cb0ad90
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This change does not affect source code compatibility. Therefore
it is mentioned in the general section.
Change-Id: I81ea30d18b01de69322d9527d0c2775b37d1d196
Reviewed-by: David Faure <david.faure@kdab.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The signal is removed from the API; all references to it are removed
from documentation; the unit test that checks for its emission is
modified to listen for QThread::finished() instead.
The QThreadPrivate::terminated flag is also removed, as it served no
purpose other than to trigger the emission of QThread::terminated()
As discussed at http://lists.qt-project.org/pipermail/development/2012-October/007216.html
the signal is not guaranteed to be emitted after every termination,
rendering it useless.
Change-Id: I7b0c45d7889da0d33875545331606f2208ee56fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is being changed because:
- The OpenGL paint engine in Qt only supports GL2
- QML2 only supports GL2
- QSurfaceFormat has a default value of 2
Applications that want to use GL1 on a QGLWidget will have to
explicitly request this format using QGLFormat::setVersion.
Task-number: QTBUG-27589
Change-Id: Ieb283ef7d6e15a29ec28ce7e4363dbf477decaa7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Qt 5 is the time to get rid of all the old inconsistencies in the raster
paint engine caused by trying to preserve the old X11 based
coordinate system where (0, 0) is in the center of the top-left pixel
instead of the upper left corner of said pixel. However, this was only
adhered for line drawing and path / rect filling, and not for image or
pixmap drawing and not at all when doing antialiased painting. By
defining the antialiased coordinate system as being the right one and
letting the aliased fill rules follow from that we finally end up with
some consistent behavior that doesn't lead to surprises and workarounds
in application code.
It is still possible for applications to get the old behavior by
setting the QPainter::Qt4CompatiblePainting render hint. This should
make porting easier for the few cases where an application relies on the
aliased fill rules we used to have in Qt 4.
Task-number: QTBUG-27500
Change-Id: If86b95e77d838ec83033d64af86632b9a73c74a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add BoundaryReason::BreakOpportunity flag that will be returned by the
boundaryReasons() when the boundary finder is at the break opportunity
position that might be not an item boundary.
This is the same as (StartWord || EndWord) in Grapheme and Sentence modes;
in Word and Line modes, BreakOpportunity flag might occur between the words
or in between of Line boundaries (e.g. in conjunction with SoftHyphen flag).
In other words, the text boundaries are always break opportunities, but not vice versa.
StartWord and EndWord flags has been deprecated by new StartOfItem and EndOfItem
flags which are not about the word boundaries only. In line breaking,
StartOfItem and EndOfItem are set for the mandatory breaks only.
Change-Id: I79bf297e2b988f5976f30cff0c8ca616385f6552
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This guarantees one will never get `!img.isNull()` after
load()/loadFromData() has failed, even if the image was
not null before.
Apply the same fix to QPixmap and QPicture.
Change-Id: Ida1ad6a6f0fc830df8e75ada0c163fc2d3360dea
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
They have unexpected results in Qt 5 (the Qt::GlobalColor one works
as expected in Qt 4, but was removed in Qt 5):
QVariant v = QVariant(Qt::red);
qDebug() << v; // QVariant(int, 7)
v = Qt::red;
qDebug() << v; // QVariant(int, 7)
The correct way is to use:
QVariant v = QVariant::fromValue(QColor(Qt::red));
The deleted constructors are the ones for which there is a class
with an implicit constructor taking the enum, and that class is
a built-in metatype.
QLocale::Language and QKeySequence::StandardKey would also fit
the description, but I can't include the header for QKeySequence
as it is in QtGui, and I don't want to include the qlocale header
in qvariant.h. Putting a QLocale::Language is probably very
uncommon anyway.
The QTextFormat test is doing the wrong thing, but the result isn't
being tested. Added new tests which fail before the patch.
Change-Id: Ia38a0784990f4d40ff7457a86daf58aabd4964eb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Version 6.2 of the Unicode Standard is a special release
dedicated to the early publication of the newly encoded Turkish lira sign.
In addition, there are some significant changes to the Unicode algorithms
for text segmentation and line breaking to improve breaking for emoji symbols.
For more details, see http://www.unicode.org/versions/Unicode6.2.0/
Change-Id: I21cfd4f307e41b41a19d36cce87f7a44c2661bc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Replace storage and operator int() return types with unsigned int
if the enum is unsigned.
This fixes a number of exisiting warnings, in particular with
Qt::MouseButton under GCC.
Change-Id: Ia12d36212329aec3e9d62a5fbd38809a6c2b36d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Leave the old name as a deprecated typedef; adapt users.
This is a prerequisite for moving QFuture back to QtCore.
Change-Id: I81dcee2c7e6eb234c16f3f42e2415ca0da3dc4f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of having QGLPixelBuffer be a unusable stub implementation we
deprecate it and implement it in terms of QOpenGLFramebufferObject.
Framebuffer objects are anyway the recommended replacement for
pixelbuffers in modern OpenGL, as the context switching overhead is
avoided.
Change-Id: Ia220c358ee92813e87981d297c51d84525010322
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The old code masked out write flags before returning permissions
from permissions() or data(FilePermissions) in order to force
QFileDialog to disable the rename and delete actions. This was to
fix Task 143519, but introduced QTBUG-20503.
Instead, revert to the pre-143519-bugfix code and do the necessary
check in QFileDialog directly.
Also add a testcase for 143519.
Reported-by: Gilles Pascual
Task-number: QTBUG-20503
Task-number: 143519
Change-Id: I140109341c0ed40722e3aac4327c2a740fb014c2
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
qCompare() was both overloaded and specialised, but always as a template.
This lead to the QIcon specialisation actually invoking
qCompare(QFlags<void*>, ...)
when specifically asking for qCompare<void*>() (detected by adding
underlying-type detection to QFlags).
Fix by preferring overloading and not specialising anything.
Change-Id: Ie001ebb9dfb0847c6c33a3f45177a61579fd61ee
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QAbstractPageSetupDialog is a completely unnecessary base class that
is not really abstract and is used nowhere else. This changes merges
its methods into the QPageSetupDialog main class.
While technically SIC no-one else uses this so no apps should be
affected.
Change-Id: I59b1739f1c453c34c25d1664d5d042e7918db316
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Removes standardIconImplementation() and layoutSpacingImplementation()
that were added in Qt 4 as a workaround for binary compatibility reasons.
Change-Id: I45292dc6802310d6cda4f443bb7484b061af0138
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
This would allow implementations to create an optimized way to create
sibling indexes.
A typical pattern of QAIM implementation is to use the same internalPointer
for each row of a subtable of a model (such that the internalPointer is
related to the common parent of each set of rows) and differentiate on the
row value in the QModelIndex. Alternatively, it is also common to have the
internalPointer correspond directly to the row value for the QModelIndex.
In both cases it is possible for the implementation to optimally create a
sibling QModelIndex in the same column as a known row. Provide a virtual
method for them to do so.
Change-Id: I3b076abcd5f6087a4cb108fbc6dceeef15529987
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Detected by a unittest failure in KDE, due to the KDETranslator subclass
not being called anymore.
Change-Id: I0171117a677e2d58aba2f76bc27f7f1f7a521cc1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A copy is placed in uihelpers for anyone who might be using it.
Change-Id: I175f7bc5dcbf25a910d28bfd8985579866392938
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
