The snippet uses the Unix touch command, not qmake's touch function.
Change-Id: I71d1460447249b8941ce4bdbb494bb419e13b119
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Widgets might be destroyed when handling a dragMoveEvent, in which case
the following code will operate on dangling pointers or null pointers.
Use a QPointer to watch for the original event receiver to disappear,
and add the necessary checks for the objects we deliver events to being
null.
Change-Id: I4ca2f182540ae21113f4bea4e5c569e983cc58bf
Fixes: QTBUG-78907
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
A certain geometry adjustment was (practically) introduced in Qt 5.11,
and caused very surprising behavior, where item widgets will often
overwrite neighbouring cells. This has resulted in a number of bug
reports. Since the adjustment has such serious side effects, and does
not seem to be relevant any longer for the issue for which it was
intended, remove it here.
More details: From early Qt 4 times, QStyledItemDelegate would do some
automatic expansion of the geometry of editor widgets - but only if
the layout was RightToLeft. Hence, the effect of it was rarely
seen. QTBUG-37433 did, for Qt 5.10, and complained about it. However,
the resulting code change did not remove the adjustment, but instead
extended it to apply to the normal LeftToRight layout also. Hence,
more users experienced it, and reported it as a regression.
Also, now in Qt 5.13, it seems Qt has changed in other ways, and the
geometry adjustment no longer seems to help (or indeed make any
difference to) the original case in QTBUG-37433.
Fixes: QTBUG-78495
Fixes: QTBUG-76011
Fixes: QTBUG-68476
Change-Id: I4a4e873969eb1d89843f98fc63d90371207515d1
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
qmake build fails:
qrandom.o: in function `QRandomGenerator::SystemGenerator::generate(unsigned int*, unsigned int*)':
/home/tjmaciei/src/qt/qt5/qtbase/src/corelib/global/qrandom.cpp:333: undefined reference to `qRandomCpu(void*, long long)'
Fixes: QTBUG-78937
Change-Id: Ib5d667bf77a740c28d2efffd15cb4236f765917c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CONFIG(cross_compile) implies CONFIG(force_bootstrap). The latter is
errorneously used within qt_tracepoints.prf and to decide when
tracegen is to be build.
For the tracepoints, we just need to check if etw/lttng trace points
are enabled.
For tracegen, we don't need to check anything - it doesn't depend
on etw or lttng, it is just a code generator similar to moc or rcc
and should be handled like these tools.
Change-Id: I3784b37db10680efd0ed7ee7860059bdf62b4118
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Properly return an invalid frame when calling jumpToFrame()
with a non existent frame number.
Fixes: QTBUG-79029
Change-Id: Ic40f4a6de3106fab42c0bb6c961194be47b04e31
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Fixes runtime warnings that got triggered by change
c2d2757bcc.
Change-Id: I50620b179de8608f45d6f2ef053eeb8b1e10ae43
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This ensures that also linker commands like -pthread are returned.
Fixes: QTBUG-77159
Change-Id: If9ab3797ccfb52c6b96a4ab120c59fd8896d5466
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
(cherry picked from commit 4ddc50c0cd16ddd146ea9ea21d6565c8f4a5e2bc)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This variable was ignored for iOS projects, because the generated
Makefile includes xcodebuild.mk that defines its own default target.
Export PRE_TARGETDEPS to the Makefile before including xcodebuild.mk
and use it there for the dependencies of the generic build targets.
Fixes: QTBUG-41325
Change-Id: I5faa82e05570974b5a844ae95b0a012c3badc64a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By default we disable screen blank and hide the cursor. This is something
inherited from Qt 4. Then reset to some default values when exiting.
This is not ideal when the system is configured with kernel parameters
like consoleblank=0 or vt.global_cursor_default=0.
So have a way to skip all tty voodoo. On systems where relevant,
one can now launch with QT_QPA_PRESERVE_CONSOLE_STATE=1 set.
[ChangeLog][Platform Specific Changes][Linux] Added an environment
variable QT_QPA_PRESERVE_CONSOLE_STATE that can be used to prevent
Qt from altering the tty screen and cursor settings when running
with platforms like linuxfb and eglfs.
Task-number: QTBUG-61916
Change-Id: I0e84e53f2d5fca992a7d26d0280ba35e30523379
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Sometimes when setAlignment is called, the text stops rendering
correctly at some point. Adding relayoutDocument call to setAlignment
fixes the problem.
Fixes: QTBUG-78728
Change-Id: Iab1cf161f0c8d700804448733338c813b5bf9762
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
And add a test for it so it can no longer happen in any current or
future implementation.
Change-Id: I3214aa90595e291b1e1c66befe185cfe1ea7bc6b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using desktop GL with this graphics card causes crashes e.g.
when using Qt WebEngine.
Fixes: QTBUG-58772
Change-Id: I90e12aab4475c17be262e391ff0989cebf0b3ec4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It's added automatically when some languages such as Japanese are
the active input language/keyboard, which results in UIKit triggering
the edit menu for any tap in the UI, regardless of whether it hits
the focus object or not.
Adopting the protocol is a much larger effort and needs to be
coordinated so that we still support text interaction on iOS
versions pre 13.0.
Even with this patch the UITextSelectionView will still blink
its own cursor, which doesn't seem to sync up with the UITextInput
protocol's view of where the cursor is.
Fixes: QTBUG-78496
Change-Id: I61500ad7ab9c8577f71188c0c99ead39465e3839
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Screen refresh rate might not be just integer but with decimal part
like, for example, 59.97 Hz. Fix calculation from raw xcb data and its
store type as it is qreal already for QScreen::refreshRate API.
Task-number: QTBUG-73911
Change-Id: Ia0494e953176c2854f0ed42c4498a29cfef16106
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When our ELF entry point function is started by the kernel, the stack is
aligned at 16 bytes. However, the stack is expected to be off by 8, due
to a preceding CALL instruction which didn't exist. This cauases a crash
further down as the compiler may generate aligned stack access.
Change-Id: I1496b069cc534f1a838dfffd15c9dc4ef9e3869e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the first column is hidden in a QTreeWidget then when doing a drag
then the selected indexes will not include any that have a column of 0.
Therefore it has to account for this use std::unique to ensure that
there is only one instance of the selected items represented by the
selected indexes.
Fixes: QTBUG-35511
Change-Id: I39dff596959f30db7378ff946735ee2866778524
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This amends 1320b2f644 to keep the
behavior of removing from the main list but without re-introducing the
memory leak.
Fixes: QTBUG-77770
Change-Id: I91fa6cb71fab8d60baa35417fdb34322af11dbbb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If there is an item already selected then the pressed position needs to
be updated regardless when selecting a new one even if it is not made
current as this will be used to determine the drag distance.
Otherwise it will start a drag within one pixel of moving due to the
fact it is doing it relative to the first item to be pressed rather than
the last.
Fixes: QTBUG-78797
Change-Id: I853041b278b2e92ccf20660f7ced945fef72527a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Specify the type of the enum value SendPostedEventsWindowsTimerId
to be UINT_PTR to work with the g++ interpretation of enumeration
signedness and use the correct type for the returned timer id.
Fixes: QTBUG-78491
Change-Id: I7b3f306d3f60da7a21500ece5243ac90854ccf1a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was found crashing with software rendering in Qt 5.7.
Removing the insignification revealed that there are failures
on WinRT as well, blacklist them for the moment.
Task-number: QTBUG-78802
Fixes: QTBUG-49630
Change-Id: Ib1a3efe69d7b63cdd98c6da364ab09e0e2dbdf62
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
...instead of the qt_ meta catalogs. The qt_ catalogs
are needed for backwards compatibility and depend on
translations for now deprecated modules, such as qtscript,
that might not be installed in the system. This causes
loading the translation to fail.
Instead of the qt_ catalogs, the examples should use the
translation files for the Qt modules used, here qtbase_.
Task-number: QTBUG-69203
Change-Id: I13f5a3d6653cef8379a712fbc02ec320eea4e51a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some AMD CPUs (e.g. AMD A4-6250J and AMD Ryzen 3000-series) have a
failing random generation instruction, which always returns
0xffffffff, even when generation was "successful".
This code checks if hardware random generator generates four consecutive
equal numbers. If it does, then we probably have a failing one and
should disable it completely.
Change-Id: I38c87920ca2e8cce4143afbff5e453ce3845d11a
Fixes: QTBUG-69423
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since iOS 13, the cascade list for the default UI font contains
meta-families for several writing systems, such as CJK. Since
these font families were never populated to the database, we ignored
them in Qt, and thus got missing glyphs for the characters in question.
The fix is to make sure these fonts are populated in the database.
It contains a partial backport of 922d195020,
which adds the qt_isFamilyPopulated() accessor to allow us to check
if the family has been populated in the font database. In Qt 5.14,
there is public API for this in QPlatformFontDatabase, so this is
a temporary resolution until then.
Fixes: QTBUG-77467
Change-Id: Ia9ebb8a19ad2367eb764ae1496a52966b465336b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
My commit 3e7463411e adjusted the focus widget by setting
QApplicationPrivate::focus_widget directly, while there is a method for
doing this properly, including setFocus_sys() and emitting signals.
Fixes: QTBUG-77364
Change-Id: I218acf7a9de39173d282ced46def4f65594f80b4
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The fix for QTBUG-35203 set the Alt+Right shortcut on the next
button, clobbering the Alt+N shortcut from parsing the text (similar
for other languages). Add a separate shortcut for Alt+Right since a
button may not have several shortcuts.
Amends 6714196f45.
Fixes: QTBUG-78604
Change-Id: I1367da739c35fbd011d11f850c9bc3915113c644
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
v3.29.0 is the latest and there is no indication as to when the next
release is so we will apply this separately for now and it can be
reverted once it is in a release that we ship with.
This patch is taken from https://www.sqlite.org/src/info/98357d8c1263920b
Change-Id: I82d398b093b67842a4369e3220c01e7eea30763a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On Windows, shortcut ".lnk" files are treated as symlinks, and
attribute queries on a shortcut file return the results for the
shortcut target.
Fixes: QTBUG-77523
Change-Id: I907a43cd9a714da288a2fffd15bada7eba37d3ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
moc extracts he name that is inthe Q_FLAG macro and that gets used in
qDebug(). As the documentation described, qDebug would have printed:
QFlags<LoadHints>(QLibrary::ResolveAllSymbolsHint)
which doesn't compile (though we could have partially specialized
QFlags<QFlags<E>> to be QFlags<E>). The semantically correct output is:
QFlags<LoadHint>(QLibrary::ResolveAllSymbolsHint)
which is what this change gets. The ideal output would be:
LoadHints(QLibrary::ResolveAllSymbolsHint)
But that's not a doc change.
Fixes: QTBUG-77216
Change-Id: I0635172f4f2a4c51a435fffd15b59a859886e90c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
On exit, QLocale::codecForLocale() can return null as the codec may have
already been destroyed. In that case, pretend that Latin1 was the
locale, so any file name is acceptable. This matches QString:
QTextCodec *codec = QTextCodec::codecForLocale();
if (codec)
return codec->toUnicode(str, size);
#endif // textcodec
return fromLatin1(str, size);
Note that if we're wrong and the locale was *not* Latin1, files that you
had a name to may not be encoded or decoded the same way.
Fixes: QTBUG-78446
Change-Id: Iece6e011237e4ab284ecfffd15c54077728a17ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The error was due to a compiler optimization bug, which is fixed
in 16.3.0.
This reverts commit 305f2c3aa6.
Fixes: QTBUG-77239
Change-Id: Idfb86ad5c3ec026518f0713c41f7ad744ab4d5db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Due to their sandboxed nature, UWP applications do not have access to
system settings like time zone.
Fixes: QTBUG-71185
Change-Id: I567a255f8adc18838fff79b81210faa094674722
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This amends 9be66cb282 so that the
DialogButtonBoxLayout case is moved to be before the
MouseDoubleClickDistance one in case the fallthrough is triggered.
Change-Id: I843dad6b55ccffe6b6c275cd75587f04659e512f
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
A previous change modified hit testing in the non-client area of
fixed-size windows, in order to prevent showing a resize cursor when
the windows are not resizable (QTBUG-77220). The change assigned
HTCAPTION for any point over the entire title bar, including the top
bar buttons, which on Windows 7 classic or basic desktop caused these
buttons to become unresponsive. The present fix changes this behavior
to redefine only the outer sizing frame, while letting the rest of the
title bar be handled by DefWindowProc().
Fixes: QTBUG-78262
Change-Id: Id6e821a805c8333a67988f87c3727bed0c93290e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
